Related
Greetings,
I had a short visit to Dubai and I've bought an X10 from the airport on my way back home. I had it sealed and I opened it when I got back.
It was shocking that it had no android market and I am stuck with the phone and can't replace it.
I just want to have the firmware other than the one loaded to it that is specific for Dubai with no android market, I've been reading in this forum and I guess this process is called "rebranding" if I am correct? Please guide me to how to get android market on my handset because they do cheat people when they sell android handset without market application.
Hi.
You could follow steps 1 to 6 HERE which will "debrand" the phone, then run SEUS for the latest FW, or should you want to root the phone you could follow all the steps.
I've followed the instruction till step 6 then I ran SEUS but it says my phone is up to date. I didn't do step 7.
I have the market now showing up, I will try it and get back to you. But I am wondering why SUES gave me no updates?
My baseband version is 1.1.27 and my build number is R2BA023
Are these the latest versions?
I've used the market app and downloaded my first application. I am really thankful for your help.
I do have a question, before I do steps (from 1 to 6) my build version was R2BA024 and after I did all you said I am stuck with R2BA023, when I try SUES or OTA update it says my phone is up to date. What does this mean? I can't update my phone anymore?
plz Re-post the link
XperienceD said:
Hi.
You could follow steps 1 to 6 HERE which will "debrand" the phone, then run SEUS for the latest FW, or should you want to root the phone you could follow all the steps.
Click to expand...
Click to collapse
i have the same exact problem as HUNCH...BUt when the click on ur link im getting this message
Invalid Thread specified. If you followed a valid link, please notify the administrator
please repost the link...
n do tell can i update my phone after that using SEUS or not?
Thx in advance!
Download Flashtool with a generic firmware, flash it into your phone and enjoy your unbranded phone with the market. After flashing with Flashtool use SEUS to be sure everything is cleaned with a clean install with SEUS.
PlayGunsta said:
Download Flashtool with a generic firmware, flash it into your phone and enjoy your unbranded phone with the market. After flashing with Flashtool use SEUS to be sure everything is cleaned with a clean install with SEUS.
Click to expand...
Click to collapse
thanx a lot for the reply....but i have a few doubts
1) My phone's firmware is already 2.1-update 1 and build number is 2.1.A.0.435 should i still download it?
2) Is the FlashTool version 0.2.8 the latest version or i shud find the lastest version and download it?
3) So,if i flash my phone wat exactly will happen?Will i get android market in my phone now?
4)Should i back up my phone before doing this?
5)there is Slide me(sam 4.0) pre-installed?...does this remain?
6)wat is debranding? should i do it too?
7)Can i update my phone usind SEUS after this?
8) what do u suggest...should i just flash my phone or i should root it too and do the utilise the below options?
-install xRecovery, Busybox
- Clean your Rom (remove /system/apps apps of your choice)
- Clear dalvik cache
- Optimize (install of JIT v2)
- Customize (installs apps found in the custom/apps folder of the flashtool)
- Clean uninstalled (remove any references to system apps removed in the Clean (root needed) step)
- Edit /system/build.prop
Thx!
Thx!
evilmonk69 said:
thanx a lot for the reply....but i have a few doubts
1) My phone's firmware is already 2.1-update 1 and build number is 2.1.A.0.435 should i still download that firmware
2) Is the FlashTool version 0.2.8 the latest version or i shud find the lastest version and download it?
3) So,if i flash my phone wat exactly will happen?Will i get android market in my phone now? Can i update my my phone using SEUS or not?
4)should i back up my phone before doing this?
5)There is slide me market(sam 4.0) pre-installed...does this remain in my phone after this?
8) what do u suggest...should i just flash my phone or i should root it too and do the utilise the below options?
-install xRecovery, Busybox
- Clean your Rom (remove /system/apps apps of your choice)
- Clear dalvik cache
- Optimize (install of JIT v2)
- Customize (installs apps found in the custom/apps folder of the flashtool)
- Clean uninstalled (remove any references to system apps removed in the Clean (root needed) step)
- Edit /system/build.prop
Thx!
Click to expand...
Click to collapse
I don't know what you want to backup, but you could sync your contact/agenda etc with google. After that, download firmware .435 Generic and flash it into your phone. You will now have a unbranded device with market.
AFter doing that, you can optimize your ROM with Flashtool, install xRecovery, root etc... After the flashtool installation you will lose EVERYTHING. So be sure you back-up all important things.
PlayGunsta said:
I don't know what you want to backup, but you could sync your contact/agenda etc with google. After that, download firmware .435 Generic and flash it into your phone. You will now have a unbranded device with market.
AFter doing that, you can optimize your ROM with Flashtool, install xRecovery, root etc... After the flashtool installation you will lose EVERYTHING. So be sure you back-up all important things.
Click to expand...
Click to collapse
thank you for the quick reply...
sorry for being such a noob but i still have some doubts
is it enough if i use back up and restore application.
n Just to be sure after this process can i use SEUS to update my phone regularly?
n how different is debranding from flashing?
evilmonk69 said:
thank you for the quick reply...
sorry for being such a noob but i still have some doubts
is it enough if i use back up and restore application.
n Just to be sure after this process can i use SEUS to update my phone regularly?
n how different is debranding from flashing?
Click to expand...
Click to collapse
Back up and restore could be fine if it does backup everything you want.
Debranding means that your phone is not LIMITED to one provider with software updates. So when SE releases a firmware you will have to wait till your provider releases the firmware for you. But when you debrand you get updates from SE and not your provider.
evilmonk69 said:
thanx a lot for the reply....but i have a few doubts
1) My phone's firmware is already 2.1-update 1 and build number is 2.1.A.0.435 should i still download that firmware
2) Is the FlashTool version 0.2.8 the latest version or i shud find the lastest version and download it?
3) So,if i flash my phone wat exactly will happen?Will i get android market in my phone now? Can i update my my phone using SEUS or not?
4)should i back up my phone before doing this?
5)There is slide me market(sam 4.0) pre-installed...does this remain in my phone after this?
8) what do u suggest...should i just flash my phone or i should root it too and do the utilise the below options?
-install xRecovery, Busybox
- Clean your Rom (remove /system/apps apps of your choice)
- Clear dalvik cache
- Optimize (install of JIT v2)
- Customize (installs apps found in the custom/apps folder of the flashtool)
- Clean uninstalled (remove any references to system apps removed in the Clean (root needed) step)
- Edit /system/build.prop
Thx!
Click to expand...
Click to collapse
Well technically this isn't debranding because your phone is not carrier branded (It's just a generic UAE with no Market).
This is just switching to another region which has Android Market. But the way to do this is exactly the same as when debranding a phone.
Android Market isn't available in the UAE region.
So if you re-flash with another region and get market, and still using a SIM from the UAE I think it would block any content. But then you could root your phone and use Market Enabler to fake another carrier and get Android Market to work.
But since you "brought it home" I can say that reflashing it to another region will get you Android Market and it will work. You don't need to back up your UAE firmware when replacing it with another region firmware, and after you've flashed it with another region firmware SEUS or PCC will always flash to that region firmware.
If you flash to another region you won't have SlideMe Market, because all other region firmwares all have access to Android Market and therefor comes with Android Market pre-installed instead.
I remember when the first 2.1.A.0.435 build was released, that was to UAE it had no Market so I made a xRecovery fix package to get Android Market on it.
But would suggest you to flash another region firmware instead of this, because then when you flash with SEUS or PCC again in the future you would miss Android Market again.
You can find the latest firmwares here (don't use the AT&T but go for the one below called 2.1.B.0.1)
http://forum.xda-developers.com/showpost.php?p=11038646&postcount=1
Sony Ericsson said:
The Android Market is not supported in the UAE. This is due to the fact that Google has not had the necessary agreements with the Regulatory bodies as yet. This is fully controlled and managed by Google. Sony Ericsson will be offering Slide Me which is an alternative to Android market in the UAE.
Click to expand...
Click to collapse
PlayGunsta said:
Back up and restore could be fine if it does backup everything you want.
Debranding means that your phone is not LIMITED to one provider with software updates. So when SE releases a firmware you will have to wait till your provider releases the firmware for you. But when you debrand you get updates from SE and not your provider.
Click to expand...
Click to collapse
So,should i just flash my phone or debrand it too?
arkedk said:
Android Market isn't available in the UAE region.
So if you debrand it and get market, and still using a SIM from the UAE I think it would block any content. But then you could root your phone and use Market Enabler to fake another carrier and get Android Market to work.
But since you "brought it home" I can say that reflashing it to another region will get you Android Market and it will work. You don't need to back up your UAE firmware when replacing it with another region firmware, and after you've flashed it with another region firmware SEUS or PCC will always flash to that region firmware.
If you flash to another region you won't have SlideMe Market, because the all other region firmwares all have access to Android Market and therefor comes with Android Market pre-installed instead.
I remember when the first 2.1.A.0.435 build was released, that was to UAE it had no Market so I made a xRecovery fix package to get Android Market on it.
But would suggest you to flash another region firmware instead of this, because then when you flash with SEUS or PCC again in the future you would miss Android Market again.
You can find the latest firmwares here (don't use the AT&T but go for the one below 2.1.B.0.1)
http://forum.xda-developers.com/showpost.php?p=11038646&postcount=1
Click to expand...
Click to collapse
Thank you so much!!!....i live in india
So, i can just flash(no need to debrand) to other region without worrying rite?
evilmonk69 said:
So,should i just flash my phone or debrand it too?
Click to expand...
Click to collapse
Just ******* flash a generic firmware as said many times before and you won't be limited by a region.
PlayGunsta said:
Just ******* flash a generic firmware as said many times before and you won't be limited by a region.
Click to expand...
Click to collapse
He is on Generic firmware just so you know.
It's just Generic firmware that does not contain Android Market.
PlayGunsta said:
Just ******* flash a generic firmware as said many times before and you won't be limited by a region.
Click to expand...
Click to collapse
sorry for being such a pain in the arse...but one last question
which generic firmware do u suggest?
evilmonk69 said:
sorry for being such a pain in the arse...but one last question
which generic firmware do u suggest?
Click to expand...
Click to collapse
You're not a pain in the arse. Some people are just immature.
As said before 2.1.B.0.1 is the latest.
http://forum.xda-developers.com/showthread.php?t=936733
Direct Download:
http://www.multiupload.com/3GT0KKFMXP
arkedk said:
You're not a pain in the arse. Some people are just immature.
As said before 2.1.B.0.1 is the latest.
http://forum.xda-developers.com/showthread.php?t=936733
Direct Download:
http://www.multiupload.com/3GT0KKFMXP
Click to expand...
Click to collapse
Thank you..thank you ...thank you!!!!
I'm watching this , chill out.
does 2.1.B.0.1include DT?
thanx for 2.1.B.0.1.It works great...
Just wondering does 2.1.B.0.1 have Dual touch
made by eqlove196426597 from CHINA
MT15i_4.0.A.2.368_HK_ftf
http://u.115.com/file/aqz1z5i4
MT15i_4.0.A.2.368_HK_rooted_system
http://u.115.com/file/bhzudmfd
thx for eq，
i love u，hahaha
eqlove196426597 said:
made by eqlove196426597 from CHINA
MT15i_4.0.A.2.368_HK_ftf
http://u.115.com/file/aqz1z5i4
MT15i_4.0.A.2.368_HK_rooted_system
http://u.115.com/file/bhzudmfd
Click to expand...
Click to collapse
THANK YOU!!!
I guess you need unlocked bootloader to flashe the rooted system.img?
on http://u.115.com/file/bhzudmfd
If you see this text, below blue sign with 115 on it:
优蛋专用下载链接 then the below are links right next to it.
联通下载 - Unicom download 电信下载 - Telecom Download
or whatever but, these are the links for those like me who can't make much out of chinese text.
flashing went perfect, in this HK version there is also Asfalt 5 HD included, nice!
------------------------
My mirror for the rooted image:
https://rapidshare.com/files/3350520540/MT15i_4.0.A.2.368_HK_rooted_system.7z
MD5: F378E8B79ACBC8903A6B69B0E0711728
----------------------------------------
mirror of the FTF file
https://rapidshare.com/files/3725100388/MT15i_4.0.A.2.368_HK.7z
MD5: B4826194C2B54AACD483ECB0941DABB4
in this ROM you can not turn off the camera sound when taking pictures :| there is no such option, you can choose one of three sounds.
MT15i_4.0.A.2.368_HK_ftf
http://www.multiupload.com/7XOEGED282
I reuploaded to a better site
Been using this for a little over 12 hours and despite the new enhancements and slightly faster running speed, I've had nothing but problems with:
- Touchscreen response is all over the place
- Had to uninstall Swype as touchscreen was making things up as it went
- Connectivity with wifi is patchy, connectivity with mobile data is questionable at best
- Sync issues related to connectivity
- Battery drain is significantly higher.
Is this an official Neo FW or something that's been compiled from the Arc release? If so, might be best to wait until the Neo FW is released properly. The update works beautifully on the Arc, but on the Neo (I have both handsets) I'm flashing back to rooted 2.3.2 and applying 2.3.3 OTA to await the new OTA build.
I recommend flashing via Wotanclient. Then unlock bootloader.
Thanks to Bi4ary, rooting newest Xperia firmware(4.0.A...) is very simple and safe.
First you need RootXperia.zip from http://forum.xda-developers.com/showthread.php?t=1130639 Put it on your SDcard.
Then fastboot recoveryNeo.img from http://forum.xda-developers.com/showthread.php?t=1183465
In recovery install RootXperia.zip
Now if you want to relock bootloader, then get this ftf, made by Blagus from
http://forum.xda-developers.com/showthread.php?t=1134335
Remember to thank our fine developers for such great tools!
(I hope that RootXperia.zip stays maintained by Bi4ary)
Raoa said:
I recommend flashing via Wotanclient. Then unlock bootloader.
Thanks to Bi4ary, rooting newest Xperia firmware(4.0.A...) is very simple and safe.
First you need RootXperia.zip from http://forum.xda-developers.com/showthread.php?t=1130639 Put it on your SDcard.
Then fastboot recoveryNeo.img from http://forum.xda-developers.com/showthread.php?t=1183465
In recovery install RootXperia.zip
Now if you want to relock bootloader, then get this ftf, made by Blagus from
http://forum.xda-developers.com/showthread.php?t=1134335
Remember to thank our fine developers for such great tools!
Click to expand...
Click to collapse
I flash MT15i_4.0.A.2.368_HK_rooted_system.img is OK,just one poccess.
And what about the issues brought out by poster before me?
Been using this for a little over 12 hours and despite the new enhancements and slightly faster running speed, I've had nothing but problems with:
- Touchscreen response is all over the place
- Had to uninstall Swype as touchscreen was making things up as it went
- Connectivity with wifi is patchy, connectivity with mobile data is questionable at best
- Sync issues related to connectivity
- Battery drain is significantly higher.
Is this an official Neo FW or something that's been compiled from the Arc release? If so, might be best to wait until the Neo FW is released properly. The update works beautifully on the Arc, but on the Neo (I have both handsets) I'm flashing back to rooted 2.3.2 and applying 2.3.3 OTA to await the new OTA build.
Click to expand...
Click to collapse
i flashed the stock firmware and had none of the problems mentioned above, to me it seems exactly the same with the benefit of the new features....
Raoa said:
I recommend flashing via Wotanclient. Then unlock bootloader.
Thanks to Bi4ary, rooting newest Xperia firmware(4.0.A...) is very simple and safe.
First you need RootXperia.zip from http://forum.xda-developers.com/showthread.php?t=1130639 Put it on your SDcard.
Then fastboot recoveryNeo.img from http://forum.xda-developers.com/showthread.php?t=1183465
In recovery install RootXperia.zip
Now if you want to relock bootloader, then get this ftf, made by Blagus from
http://forum.xda-developers.com/showthread.php?t=1134335
Remember to thank our fine developers for such great tools!
(I hope that RootXperia.zip stays maintained by Bi4ary)
Click to expand...
Click to collapse
This worked for me 100% as posted in the other thread. No issues here. Just a faster phone,
No issues whatsoever with the hk-firmware. The only thing i've noticed is that the camera sound can not be disabled (not even in third party apps), but I suppose thats only because of the rules and laws in HK that does not allow silent cameraphones. It's however easily fixed when rooted by switching the sound files in the systems media folder.
Hello,
I have a MT15a, would that work on it or is it ONLY for MT15i?
Thanks!
Hi
i'm a new owner of experia neo
i want update to new firmware, but i don't understand a thing
what mean "the touchscreen response is all over the place" ?
i have some problem for the correct translation
wich is the problem, is less responsive? less feeling?
i will update official firmware with Pc companion, not rooted
maRRRco89 said:
Hi
i'm a new owner of experia neo
i want update to new firmware, but i don't understand a thing
what mean "the touchscreen response is all over the place" ?
i have some problem for the correct translation
wich is the problem, is less responsive? less feeling?
i will update official firmware with Pc companion, not rooted
Click to expand...
Click to collapse
It means that person had a problem with their touchscreen. It is not related to the update, it was just an individual error.
You can update without any problems using PC Companion or Sony Ericsson Update Service (recommended).
Ambroos said:
It means that person had a problem with their touchscreen. It is not related to the update, it was just an individual error.
You can update without any problems using PC Companion or Sony Ericsson Update Service (recommended).
Click to expand...
Click to collapse
Thanks, but
the firmware now is not available in europe
the update service say me the firmware 3.0 ... is the last
maRRRco89 said:
Thanks, but
the firmware now is not available in europe
the update service say me the firmware 3.0 ... is the last
Click to expand...
Click to collapse
They're still rolling it out. Generic Nordic has the update.
Hi,
I have an X8 E15a. It's rooted with custom firmware and custom rom.
The problem is that it is SIM locked...
I have read that all SIM UNLOCK software require STOCK 2.1 roms. Is it true?
1-.So, how can I go back to stock rom? Is there and custom recoverye flashable stock?
2-.Is there any way to sim unlock (besides of course contact my local carrier and ask for it).
Best Regards.
1. You an flash it, with SEUS or PC Companion, you can download them from SE's web page, or yo can flash it with FlashTool (Easiest way: SEUS or PCC)
2. You can unlock your phone on different webpages, where you pay, and they give you instructions for unlocking your phone
her3814 said:
1. You an flash it, with SEUS or PC Companion, you can download them from SE's web page, or yo can flash it with FlashTool (Easiest way: SEUS or PCC)
2. You can unlock your phone on different webpages, where you pay, and they give you instructions for unlocking your phone
Click to expand...
Click to collapse
PC Companions says "There is no Software Available Try Later"...
SEUS says "No Updates Available"
Dont go to updqte software go to repair!
Sent from my Shakira using XDA App
dsaklein said:
Dont go to updqte software go to repair!
Sent from my Shakira using XDA App
Click to expand...
Click to collapse
Same thing with repair...
check ur baseband, for some solutions is baseband match required
This is so weird...
I'm using FLASHTOOL using this guide:
http://forum.xda-developers.com/showthread.php?p=12442257#post12442257
I flashed this rom:
SE x8_2.1_rus.ftf
Which is 2.1 right? Well... now it's on Android 1.6.
I said "hey maybe I made a mistake..." and downloaded from this page:
http://forum.xda-developers.com/showthread.php?t=875688
This file:
E15a android 2.1.1 SI 1243-9502 Sony
So... following this page:
http://forum.xda-developers.com/showthread.php?p=10879507#post10879507
I made an FTF file with it... and flashed it.
To my surprise I am still on Android 1.6 also BASEBAND shows UNKONWN.
SEUS and PCC still shows NO UPDATE for my phone, even using REPAIR.
Please, I need help with it.
So I flashed baseband for E15A from this page:
http://forum.xda-developers.com/showthread.php?t=976538
But now my phone is stuck on Sony Ericsson logo... not even Android 1.6
When I try to flash a "made by me" FTF file it gives me a;
28/018/2011 19:18:58 - ERROR - Error flashing. Aborted
I can only flash: SE x8_2.1_rus.ftf which is for 15i i think...
It seems that the problem is that I flashed a FTF for a 15i and now I'm stucked in Android 1.6 and can't do anything...
UPDATE:
Now I'm on this rom: X8 Shakira E15i_2.1.1.A.0.6_generic.ftf
And flashed this baseband: Baseband 015 - kernel 2.1.1.A.0.6
Do you think it's OK for unlocking?
UPDATE2:
UNLOCKED WORKED FINE WITH: X8 Shakira E15i_2.1.1.A.0.6_generic.ftf
I used a software called: Multi Unlock CLient
Best Regards.
That´s free, isn´t it?
So that means, we can unlock for free?
Because I´ve found a download link for that software, so I can get it for free/it´s really free.
And another question:
Will does be compatible with unlocked bootloader?
codfreak said:
That´s free, isn´t it?
So that means, we can unlock for free?
Because I´ve found a download link for that software, so I can get it for free/it´s really free.
And another question:
Will does be compatible with unlocked bootloader?
Click to expand...
Click to collapse
No, it's not free.
For unlocking purposes you need a USERNAME and PASSWORD.
I did not tried UNLOCKED bootloader as it says that it might "relock" your phone.
I am new here in this forum but i was also facing problem with root accedently i update my arc from 0.42 to 0.62 and i lost my root. Now yesterday rooted my arc and my phone once again awsome.....I want to share how i did it and this happened with the help of comments in this forum and moders and developer who develop the mods for arc. Its not my work just share.
(1) MAke backup of your market appliction with titanium backup.
(2) Download 4.0.2.A.0.42 from ( jlmcr87 posted the link )
(3) Flash this firmware with any version of flastool i did this with 0.2.9 & 0.6.8
(4) After flashing the firmware root xperia arc with the methood of ( zergRUSH any version ) i root with the ( zergRUSH version 1 & 3).
(5) After that immediately connect your phone with wireless network and check for update. Its display that new version is availabe 4.0.2.A.0.62. Click to update
After update click to install. IT will take time and your phone start several time dont worry about it. After completing update first boot take time.
(6) To Check root install CWM autoinstaller or Titanium backup. Have fun
hi
thanks man i was serching for root about 3 days ago and found nothing
please could u please post the url of the tools that you use it here
because i didnt know from where can i get these URLs
u said { Download 4.0.2.A.0.42 from ( jlmcr87 posted the link ) }
where does jlmcr87 post the link ??
please post it here asap..
thanks man
i found it and finally rooted my arc
you r awesome
link
(1) for 4.0.2.A.0.42 is ( ://uploaded.to/file/vmfu4czg )
(2) And for flash tool ( ://ul.to/w076p5wf )
Plz put http berfore the link
original link is posted by ( jlmcr87 ) i am just paste here to the help of other users like me.
So please put ( http ) before the link i pasted above.
Happy to hear it works for you. It doesn't work for me. When I try to update via OTA, the phone starts updating, does a few reboots and when you think it is done it shows a message "Could not install new software version. Try again"
which firmware you flashed on your arc. i pasred a link of 0.42 download and flash it. it worked 100% i have done this on 7 xperia arc sets. all sets work perfectly working awsome. Try one more time with step by step it will definately work
Error
Could not install new software version. Try again.
Xperia Arc s
Good work Atif. And thanks for the steps shown. Many new users were asking for that.
Hello guys i have xperia mini wih 4.0.2.A.0.62 can i root it with the method you said?? I ask because everyone tells for arc only
thanks Alex
alexandros050 said:
Hello guys i have xperia mini wih 4.0.2.A.0.62 can i root it with the method you said?? I ask because everyone tells for arc only
thanks Alex
Click to expand...
Click to collapse
Any ideas on above ?
can it flash ARC S too ? (LT18i )
JJD809 said:
Happy to hear it works for you. It doesn't work for me. When I try to update via OTA, the phone starts updating, does a few reboots and when you think it is done it shows a message "Could not install new software version. Try again"
Click to expand...
Click to collapse
Same for me - tried 3+ times now.
This post seems to suggest the update is no longer available with ICS so close, but in that case I'd have thought it would fail earlier - the download seems to work fine; it's the install that fails.
43
ya.. but i can root ...
i have firmware 42 . i rooted with zergrush,then i deleted some bloatware previously..
so i have retored the stuff that i deleted from system/app..
then i update over air for .62 i download. after that phone rebooted.. then within the second it told me that "update failed" for .62 firmware ...!!
plz help to correct me
As in my second post i told download 0.42 firmware from this link( ://uploaded.to/file/vmfu4czg ) then flash it and then root it. Then update it through wifi. Today i try it on xperia s (LT18i) and i ts working perfectly i did not face any problem.
try flashing 0.42 Generic Global and then do all the procedure
Srry for lazy in translating, i have some more detail (including picture to demonstrate) in this link
Hope this can help
If you want to update OTA from .42 to .62, don't change anything in the system files. Update to .62 OTA first, then do whatever you want to your phone.
Hi there Got the same problem. I was always using Zergrush method for root. When I got .62 firmware it wont work. (fails in console while rooting). You said that we must flash .42 firmware then root, then update via OTA, but I got relocked bootloader. Can it brick my phone?
Not with locked bootloader.
Only use ota with locked bootloader
Sent from my LT15i using XDA App
Yes, but my friend got xperia play. After unlocking bootloader he locked it with THIS
method. Then he start updating via OTA and get his phone bricked.
I got locked bootloader with the same method.
here is new file upload to gdrive
https://docs.google.com/file/d/0B3P5IuYR4HmGVXpLQy1XUVR4Snc/edit?usp=sharing
Enjoy
sorry for the trouble.
For the people who interested, this is Singapore latest firmware 10.3.A.0.423-R4B 1270-1412
https://docs.google.com/file/d/0B3P5IuYR4HmGbnhidy02bW83Y1U/edit?usp=sharing
Thanks ! Downloading now, does this work with Doomlord's v15 root exploit ?
feizylong said:
File split into two: part a and part b
http://d-h.st/Z8v
http://d-h.st/NZt
MD5 091b5c5512822af2a48609b4046a9a3d
Previous version: 10.1.1.A.1.307
Enjoy
Click to expand...
Click to collapse
So is the HK one better than the ES one?
make87 said:
Thanks ! Downloading now, does this work with Doomlord's v15 root exploit ?
Click to expand...
Click to collapse
Yes, it does work.
ryuworks said:
So is the HK one better than the ES one?
Click to expand...
Click to collapse
It comes with NFC icon pre-enable I assume , compare with spain tft which need to modified.
any of the irritating notifications?
has permanent "swipe up to unlock" text?
compatible to all xperia z cust #s?
Possible to elaborate more on merging files?
I need help on merging the files as well.
Any idea how to do it on Mac OSX?
update:
I've figured out how to merge the files in Mac OSX with terminal.
After flashing the rom, I'm still on 4.1.2?
why 4.1.2???? i already flash it..
the same problem: 4.1.2 after flashing
flashtool 0.9.11.0
flashing process was completed without any errors
but... 4.1.2 and even not HK - just my previous build and localization
yegorka said:
the same problem: 4.1.2 after flashing
flashtool 0.9.11.0
flashing process was completed without any errors
but... 4.1.2 and even not HK - just my previous build and localization
Click to expand...
Click to collapse
Same here.
The first time i flash from the last global fw and got stuck in a boot loop.
I used update service to reset my phone. It reverted back to the last fw that was released in the uk. So this was a couple of firmwares backwards.
I then tried to flash this ftf again. After the process my phone is factory reset but with the uk firmware that was released a good few weeks ago.
That's very awkward.
@feizylong: Did you use all (five) FILE_********* files from Sony PC Companion / Sony Update Service?
Did you include everything except simlock.ta?
Same here. Flashed and still on 4.1.2. :crying:
after comparing this firmware with ES one, i found that here are TWO "elabel" files!
but deleting of "elabel-c6603-row_201302281243_10.1.1.A.1.253.sin" from the .FTF (and leaving "elabel-c6603-row_201302281243_10.3.A.0.423.sin") didn't help at all
bye-bye, buggy HK
hello, working ES!
yegorka said:
after comparing this firmware with ES one, i found that here are TWO "elabel" files!
but deleting of "elabel-c6603-row_201302281243_10.1.1.A.1.253.sin" from the .FTF (and leaving "elabel-c6603-row_201302281243_10.3.A.0.423.sin") didn't help at all
bye-bye, buggy HK
hello, working ES!
Click to expand...
Click to collapse
Just wasted my time! Should of just stuck to the ES
Sorry guy,
here is a complete one file :
https://docs.google.com/file/d/0B3P5IuYR4HmGVXpLQy1XUVR4Snc/edit?usp=sharing
flash it at your own risk..
happy flashing
Hello, who can assist for the CMW kernel for the 4.2.2 version for flashing through flashtool ? I think there's none yet released, but there are version where you need to flash the whole ZIP file. I just need the kernel boot.img with CMW, as i flashed the ES unbranded version. Working just excellent, and rooted with DooMLord's V15 easy rooting toolkit
permanent "swipe up to unlock" text?
How to take screenshot now in 4.2.2?