I am new here in this forum but i was also facing problem with root accedently i update my arc from 0.42 to 0.62 and i lost my root. Now yesterday rooted my arc and my phone once again awsome.....I want to share how i did it and this happened with the help of comments in this forum and moders and developer who develop the mods for arc. Its not my work just share.
(1) MAke backup of your market appliction with titanium backup.
(2) Download 4.0.2.A.0.42 from ( jlmcr87 posted the link )
(3) Flash this firmware with any version of flastool i did this with 0.2.9 & 0.6.8
(4) After flashing the firmware root xperia arc with the methood of ( zergRUSH any version ) i root with the ( zergRUSH version 1 & 3).
(5) After that immediately connect your phone with wireless network and check for update. Its display that new version is availabe 4.0.2.A.0.62. Click to update
After update click to install. IT will take time and your phone start several time dont worry about it. After completing update first boot take time.
(6) To Check root install CWM autoinstaller or Titanium backup. Have fun
hi
thanks man i was serching for root about 3 days ago and found nothing
please could u please post the url of the tools that you use it here
because i didnt know from where can i get these URLs
u said { Download 4.0.2.A.0.42 from ( jlmcr87 posted the link ) }
where does jlmcr87 post the link ??
please post it here asap..
thanks man
i found it and finally rooted my arc
you r awesome
link
(1) for 4.0.2.A.0.42 is ( ://uploaded.to/file/vmfu4czg )
(2) And for flash tool ( ://ul.to/w076p5wf )
Plz put http berfore the link
original link is posted by ( jlmcr87 ) i am just paste here to the help of other users like me.
So please put ( http ) before the link i pasted above.
Happy to hear it works for you. It doesn't work for me. When I try to update via OTA, the phone starts updating, does a few reboots and when you think it is done it shows a message "Could not install new software version. Try again"
which firmware you flashed on your arc. i pasred a link of 0.42 download and flash it. it worked 100% i have done this on 7 xperia arc sets. all sets work perfectly working awsome. Try one more time with step by step it will definately work
Error
Could not install new software version. Try again.
Xperia Arc s
Good work Atif. And thanks for the steps shown. Many new users were asking for that.
Hello guys i have xperia mini wih 4.0.2.A.0.62 can i root it with the method you said?? I ask because everyone tells for arc only
thanks Alex
alexandros050 said:
Hello guys i have xperia mini wih 4.0.2.A.0.62 can i root it with the method you said?? I ask because everyone tells for arc only
thanks Alex
Click to expand...
Click to collapse
Any ideas on above ?
can it flash ARC S too ? (LT18i )
JJD809 said:
Happy to hear it works for you. It doesn't work for me. When I try to update via OTA, the phone starts updating, does a few reboots and when you think it is done it shows a message "Could not install new software version. Try again"
Click to expand...
Click to collapse
Same for me - tried 3+ times now.
This post seems to suggest the update is no longer available with ICS so close, but in that case I'd have thought it would fail earlier - the download seems to work fine; it's the install that fails.
43
ya.. but i can root ...
i have firmware 42 . i rooted with zergrush,then i deleted some bloatware previously..
so i have retored the stuff that i deleted from system/app..
then i update over air for .62 i download. after that phone rebooted.. then within the second it told me that "update failed" for .62 firmware ...!!
plz help to correct me
As in my second post i told download 0.42 firmware from this link( ://uploaded.to/file/vmfu4czg ) then flash it and then root it. Then update it through wifi. Today i try it on xperia s (LT18i) and i ts working perfectly i did not face any problem.
try flashing 0.42 Generic Global and then do all the procedure
Srry for lazy in translating, i have some more detail (including picture to demonstrate) in this link
Hope this can help
If you want to update OTA from .42 to .62, don't change anything in the system files. Update to .62 OTA first, then do whatever you want to your phone.
Hi there Got the same problem. I was always using Zergrush method for root. When I got .62 firmware it wont work. (fails in console while rooting). You said that we must flash .42 firmware then root, then update via OTA, but I got relocked bootloader. Can it brick my phone?
Not with locked bootloader.
Only use ota with locked bootloader
Sent from my LT15i using XDA App
Yes, but my friend got xperia play. After unlocking bootloader he locked it with THIS
method. Then he start updating via OTA and get his phone bricked.
I got locked bootloader with the same method.
Related
Greetings,
I had a short visit to Dubai and I've bought an X10 from the airport on my way back home. I had it sealed and I opened it when I got back.
It was shocking that it had no android market and I am stuck with the phone and can't replace it.
I just want to have the firmware other than the one loaded to it that is specific for Dubai with no android market, I've been reading in this forum and I guess this process is called "rebranding" if I am correct? Please guide me to how to get android market on my handset because they do cheat people when they sell android handset without market application.
Hi.
You could follow steps 1 to 6 HERE which will "debrand" the phone, then run SEUS for the latest FW, or should you want to root the phone you could follow all the steps.
I've followed the instruction till step 6 then I ran SEUS but it says my phone is up to date. I didn't do step 7.
I have the market now showing up, I will try it and get back to you. But I am wondering why SUES gave me no updates?
My baseband version is 1.1.27 and my build number is R2BA023
Are these the latest versions?
I've used the market app and downloaded my first application. I am really thankful for your help.
I do have a question, before I do steps (from 1 to 6) my build version was R2BA024 and after I did all you said I am stuck with R2BA023, when I try SUES or OTA update it says my phone is up to date. What does this mean? I can't update my phone anymore?
plz Re-post the link
XperienceD said:
Hi.
You could follow steps 1 to 6 HERE which will "debrand" the phone, then run SEUS for the latest FW, or should you want to root the phone you could follow all the steps.
Click to expand...
Click to collapse
i have the same exact problem as HUNCH...BUt when the click on ur link im getting this message
Invalid Thread specified. If you followed a valid link, please notify the administrator
please repost the link...
n do tell can i update my phone after that using SEUS or not?
Thx in advance!
Download Flashtool with a generic firmware, flash it into your phone and enjoy your unbranded phone with the market. After flashing with Flashtool use SEUS to be sure everything is cleaned with a clean install with SEUS.
PlayGunsta said:
Download Flashtool with a generic firmware, flash it into your phone and enjoy your unbranded phone with the market. After flashing with Flashtool use SEUS to be sure everything is cleaned with a clean install with SEUS.
Click to expand...
Click to collapse
thanx a lot for the reply....but i have a few doubts
1) My phone's firmware is already 2.1-update 1 and build number is 2.1.A.0.435 should i still download it?
2) Is the FlashTool version 0.2.8 the latest version or i shud find the lastest version and download it?
3) So,if i flash my phone wat exactly will happen?Will i get android market in my phone now?
4)Should i back up my phone before doing this?
5)there is Slide me(sam 4.0) pre-installed?...does this remain?
6)wat is debranding? should i do it too?
7)Can i update my phone usind SEUS after this?
8) what do u suggest...should i just flash my phone or i should root it too and do the utilise the below options?
-install xRecovery, Busybox
- Clean your Rom (remove /system/apps apps of your choice)
- Clear dalvik cache
- Optimize (install of JIT v2)
- Customize (installs apps found in the custom/apps folder of the flashtool)
- Clean uninstalled (remove any references to system apps removed in the Clean (root needed) step)
- Edit /system/build.prop
Thx!
Thx!
evilmonk69 said:
thanx a lot for the reply....but i have a few doubts
1) My phone's firmware is already 2.1-update 1 and build number is 2.1.A.0.435 should i still download that firmware
2) Is the FlashTool version 0.2.8 the latest version or i shud find the lastest version and download it?
3) So,if i flash my phone wat exactly will happen?Will i get android market in my phone now? Can i update my my phone using SEUS or not?
4)should i back up my phone before doing this?
5)There is slide me market(sam 4.0) pre-installed...does this remain in my phone after this?
8) what do u suggest...should i just flash my phone or i should root it too and do the utilise the below options?
-install xRecovery, Busybox
- Clean your Rom (remove /system/apps apps of your choice)
- Clear dalvik cache
- Optimize (install of JIT v2)
- Customize (installs apps found in the custom/apps folder of the flashtool)
- Clean uninstalled (remove any references to system apps removed in the Clean (root needed) step)
- Edit /system/build.prop
Thx!
Click to expand...
Click to collapse
I don't know what you want to backup, but you could sync your contact/agenda etc with google. After that, download firmware .435 Generic and flash it into your phone. You will now have a unbranded device with market.
AFter doing that, you can optimize your ROM with Flashtool, install xRecovery, root etc... After the flashtool installation you will lose EVERYTHING. So be sure you back-up all important things.
PlayGunsta said:
I don't know what you want to backup, but you could sync your contact/agenda etc with google. After that, download firmware .435 Generic and flash it into your phone. You will now have a unbranded device with market.
AFter doing that, you can optimize your ROM with Flashtool, install xRecovery, root etc... After the flashtool installation you will lose EVERYTHING. So be sure you back-up all important things.
Click to expand...
Click to collapse
thank you for the quick reply...
sorry for being such a noob but i still have some doubts
is it enough if i use back up and restore application.
n Just to be sure after this process can i use SEUS to update my phone regularly?
n how different is debranding from flashing?
evilmonk69 said:
thank you for the quick reply...
sorry for being such a noob but i still have some doubts
is it enough if i use back up and restore application.
n Just to be sure after this process can i use SEUS to update my phone regularly?
n how different is debranding from flashing?
Click to expand...
Click to collapse
Back up and restore could be fine if it does backup everything you want.
Debranding means that your phone is not LIMITED to one provider with software updates. So when SE releases a firmware you will have to wait till your provider releases the firmware for you. But when you debrand you get updates from SE and not your provider.
evilmonk69 said:
thanx a lot for the reply....but i have a few doubts
1) My phone's firmware is already 2.1-update 1 and build number is 2.1.A.0.435 should i still download that firmware
2) Is the FlashTool version 0.2.8 the latest version or i shud find the lastest version and download it?
3) So,if i flash my phone wat exactly will happen?Will i get android market in my phone now? Can i update my my phone using SEUS or not?
4)should i back up my phone before doing this?
5)There is slide me market(sam 4.0) pre-installed...does this remain in my phone after this?
8) what do u suggest...should i just flash my phone or i should root it too and do the utilise the below options?
-install xRecovery, Busybox
- Clean your Rom (remove /system/apps apps of your choice)
- Clear dalvik cache
- Optimize (install of JIT v2)
- Customize (installs apps found in the custom/apps folder of the flashtool)
- Clean uninstalled (remove any references to system apps removed in the Clean (root needed) step)
- Edit /system/build.prop
Thx!
Click to expand...
Click to collapse
Well technically this isn't debranding because your phone is not carrier branded (It's just a generic UAE with no Market).
This is just switching to another region which has Android Market. But the way to do this is exactly the same as when debranding a phone.
Android Market isn't available in the UAE region.
So if you re-flash with another region and get market, and still using a SIM from the UAE I think it would block any content. But then you could root your phone and use Market Enabler to fake another carrier and get Android Market to work.
But since you "brought it home" I can say that reflashing it to another region will get you Android Market and it will work. You don't need to back up your UAE firmware when replacing it with another region firmware, and after you've flashed it with another region firmware SEUS or PCC will always flash to that region firmware.
If you flash to another region you won't have SlideMe Market, because all other region firmwares all have access to Android Market and therefor comes with Android Market pre-installed instead.
I remember when the first 2.1.A.0.435 build was released, that was to UAE it had no Market so I made a xRecovery fix package to get Android Market on it.
But would suggest you to flash another region firmware instead of this, because then when you flash with SEUS or PCC again in the future you would miss Android Market again.
You can find the latest firmwares here (don't use the AT&T but go for the one below called 2.1.B.0.1)
http://forum.xda-developers.com/showpost.php?p=11038646&postcount=1
Sony Ericsson said:
The Android Market is not supported in the UAE. This is due to the fact that Google has not had the necessary agreements with the Regulatory bodies as yet. This is fully controlled and managed by Google. Sony Ericsson will be offering Slide Me which is an alternative to Android market in the UAE.
Click to expand...
Click to collapse
PlayGunsta said:
Back up and restore could be fine if it does backup everything you want.
Debranding means that your phone is not LIMITED to one provider with software updates. So when SE releases a firmware you will have to wait till your provider releases the firmware for you. But when you debrand you get updates from SE and not your provider.
Click to expand...
Click to collapse
So,should i just flash my phone or debrand it too?
arkedk said:
Android Market isn't available in the UAE region.
So if you debrand it and get market, and still using a SIM from the UAE I think it would block any content. But then you could root your phone and use Market Enabler to fake another carrier and get Android Market to work.
But since you "brought it home" I can say that reflashing it to another region will get you Android Market and it will work. You don't need to back up your UAE firmware when replacing it with another region firmware, and after you've flashed it with another region firmware SEUS or PCC will always flash to that region firmware.
If you flash to another region you won't have SlideMe Market, because the all other region firmwares all have access to Android Market and therefor comes with Android Market pre-installed instead.
I remember when the first 2.1.A.0.435 build was released, that was to UAE it had no Market so I made a xRecovery fix package to get Android Market on it.
But would suggest you to flash another region firmware instead of this, because then when you flash with SEUS or PCC again in the future you would miss Android Market again.
You can find the latest firmwares here (don't use the AT&T but go for the one below 2.1.B.0.1)
http://forum.xda-developers.com/showpost.php?p=11038646&postcount=1
Click to expand...
Click to collapse
Thank you so much!!!....i live in india
So, i can just flash(no need to debrand) to other region without worrying rite?
evilmonk69 said:
So,should i just flash my phone or debrand it too?
Click to expand...
Click to collapse
Just ******* flash a generic firmware as said many times before and you won't be limited by a region.
PlayGunsta said:
Just ******* flash a generic firmware as said many times before and you won't be limited by a region.
Click to expand...
Click to collapse
He is on Generic firmware just so you know.
It's just Generic firmware that does not contain Android Market.
PlayGunsta said:
Just ******* flash a generic firmware as said many times before and you won't be limited by a region.
Click to expand...
Click to collapse
sorry for being such a pain in the arse...but one last question
which generic firmware do u suggest?
evilmonk69 said:
sorry for being such a pain in the arse...but one last question
which generic firmware do u suggest?
Click to expand...
Click to collapse
You're not a pain in the arse. Some people are just immature.
As said before 2.1.B.0.1 is the latest.
http://forum.xda-developers.com/showthread.php?t=936733
Direct Download:
http://www.multiupload.com/3GT0KKFMXP
arkedk said:
You're not a pain in the arse. Some people are just immature.
As said before 2.1.B.0.1 is the latest.
http://forum.xda-developers.com/showthread.php?t=936733
Direct Download:
http://www.multiupload.com/3GT0KKFMXP
Click to expand...
Click to collapse
Thank you..thank you ...thank you!!!!
I'm watching this , chill out.
does 2.1.B.0.1include DT?
thanx for 2.1.B.0.1.It works great...
Just wondering does 2.1.B.0.1 have Dual touch
made by eqlove196426597 from CHINA
MT15i_4.0.A.2.368_HK_ftf
http://u.115.com/file/aqz1z5i4
MT15i_4.0.A.2.368_HK_rooted_system
http://u.115.com/file/bhzudmfd
thx for eq，
i love u，hahaha
eqlove196426597 said:
made by eqlove196426597 from CHINA
MT15i_4.0.A.2.368_HK_ftf
http://u.115.com/file/aqz1z5i4
MT15i_4.0.A.2.368_HK_rooted_system
http://u.115.com/file/bhzudmfd
Click to expand...
Click to collapse
THANK YOU!!!
I guess you need unlocked bootloader to flashe the rooted system.img?
on http://u.115.com/file/bhzudmfd
If you see this text, below blue sign with 115 on it:
优蛋专用下载链接 then the below are links right next to it.
联通下载 - Unicom download 电信下载 - Telecom Download
or whatever but, these are the links for those like me who can't make much out of chinese text.
flashing went perfect, in this HK version there is also Asfalt 5 HD included, nice!
------------------------
My mirror for the rooted image:
https://rapidshare.com/files/3350520540/MT15i_4.0.A.2.368_HK_rooted_system.7z
MD5: F378E8B79ACBC8903A6B69B0E0711728
----------------------------------------
mirror of the FTF file
https://rapidshare.com/files/3725100388/MT15i_4.0.A.2.368_HK.7z
MD5: B4826194C2B54AACD483ECB0941DABB4
in this ROM you can not turn off the camera sound when taking pictures :| there is no such option, you can choose one of three sounds.
MT15i_4.0.A.2.368_HK_ftf
http://www.multiupload.com/7XOEGED282
I reuploaded to a better site
Been using this for a little over 12 hours and despite the new enhancements and slightly faster running speed, I've had nothing but problems with:
- Touchscreen response is all over the place
- Had to uninstall Swype as touchscreen was making things up as it went
- Connectivity with wifi is patchy, connectivity with mobile data is questionable at best
- Sync issues related to connectivity
- Battery drain is significantly higher.
Is this an official Neo FW or something that's been compiled from the Arc release? If so, might be best to wait until the Neo FW is released properly. The update works beautifully on the Arc, but on the Neo (I have both handsets) I'm flashing back to rooted 2.3.2 and applying 2.3.3 OTA to await the new OTA build.
I recommend flashing via Wotanclient. Then unlock bootloader.
Thanks to Bi4ary, rooting newest Xperia firmware(4.0.A...) is very simple and safe.
First you need RootXperia.zip from http://forum.xda-developers.com/showthread.php?t=1130639 Put it on your SDcard.
Then fastboot recoveryNeo.img from http://forum.xda-developers.com/showthread.php?t=1183465
In recovery install RootXperia.zip
Now if you want to relock bootloader, then get this ftf, made by Blagus from
http://forum.xda-developers.com/showthread.php?t=1134335
Remember to thank our fine developers for such great tools!
(I hope that RootXperia.zip stays maintained by Bi4ary)
Raoa said:
I recommend flashing via Wotanclient. Then unlock bootloader.
Thanks to Bi4ary, rooting newest Xperia firmware(4.0.A...) is very simple and safe.
First you need RootXperia.zip from http://forum.xda-developers.com/showthread.php?t=1130639 Put it on your SDcard.
Then fastboot recoveryNeo.img from http://forum.xda-developers.com/showthread.php?t=1183465
In recovery install RootXperia.zip
Now if you want to relock bootloader, then get this ftf, made by Blagus from
http://forum.xda-developers.com/showthread.php?t=1134335
Remember to thank our fine developers for such great tools!
Click to expand...
Click to collapse
I flash MT15i_4.0.A.2.368_HK_rooted_system.img is OK,just one poccess.
And what about the issues brought out by poster before me?
Been using this for a little over 12 hours and despite the new enhancements and slightly faster running speed, I've had nothing but problems with:
- Touchscreen response is all over the place
- Had to uninstall Swype as touchscreen was making things up as it went
- Connectivity with wifi is patchy, connectivity with mobile data is questionable at best
- Sync issues related to connectivity
- Battery drain is significantly higher.
Is this an official Neo FW or something that's been compiled from the Arc release? If so, might be best to wait until the Neo FW is released properly. The update works beautifully on the Arc, but on the Neo (I have both handsets) I'm flashing back to rooted 2.3.2 and applying 2.3.3 OTA to await the new OTA build.
Click to expand...
Click to collapse
i flashed the stock firmware and had none of the problems mentioned above, to me it seems exactly the same with the benefit of the new features....
Raoa said:
I recommend flashing via Wotanclient. Then unlock bootloader.
Thanks to Bi4ary, rooting newest Xperia firmware(4.0.A...) is very simple and safe.
First you need RootXperia.zip from http://forum.xda-developers.com/showthread.php?t=1130639 Put it on your SDcard.
Then fastboot recoveryNeo.img from http://forum.xda-developers.com/showthread.php?t=1183465
In recovery install RootXperia.zip
Now if you want to relock bootloader, then get this ftf, made by Blagus from
http://forum.xda-developers.com/showthread.php?t=1134335
Remember to thank our fine developers for such great tools!
(I hope that RootXperia.zip stays maintained by Bi4ary)
Click to expand...
Click to collapse
This worked for me 100% as posted in the other thread. No issues here. Just a faster phone,
No issues whatsoever with the hk-firmware. The only thing i've noticed is that the camera sound can not be disabled (not even in third party apps), but I suppose thats only because of the rules and laws in HK that does not allow silent cameraphones. It's however easily fixed when rooted by switching the sound files in the systems media folder.
Hello,
I have a MT15a, would that work on it or is it ONLY for MT15i?
Thanks!
Hi
i'm a new owner of experia neo
i want update to new firmware, but i don't understand a thing
what mean "the touchscreen response is all over the place" ?
i have some problem for the correct translation
wich is the problem, is less responsive? less feeling?
i will update official firmware with Pc companion, not rooted
maRRRco89 said:
Hi
i'm a new owner of experia neo
i want update to new firmware, but i don't understand a thing
what mean "the touchscreen response is all over the place" ?
i have some problem for the correct translation
wich is the problem, is less responsive? less feeling?
i will update official firmware with Pc companion, not rooted
Click to expand...
Click to collapse
It means that person had a problem with their touchscreen. It is not related to the update, it was just an individual error.
You can update without any problems using PC Companion or Sony Ericsson Update Service (recommended).
Ambroos said:
It means that person had a problem with their touchscreen. It is not related to the update, it was just an individual error.
You can update without any problems using PC Companion or Sony Ericsson Update Service (recommended).
Click to expand...
Click to collapse
Thanks, but
the firmware now is not available in europe
the update service say me the firmware 3.0 ... is the last
maRRRco89 said:
Thanks, but
the firmware now is not available in europe
the update service say me the firmware 3.0 ... is the last
Click to expand...
Click to collapse
They're still rolling it out. Generic Nordic has the update.
I don't kow why but I followed the instructions to install on the locked bootloader.After bootup,it just stuck on the SE logo but xRecovery still works.Any solutions?
??
c903jerk said:
I don't kow why but I followed the instructions to install on the locked bootloader.After bootup,it just stuck on the SE logo but xRecovery still works.Any solutions?
Click to expand...
Click to collapse
Hello,
May i ask your previous ROM/Kernel/Baseband was? Was the Android OS 2.3.3 Rooted Gingerbread? Probably something to do with your previous installed thingy.
When i was installing x10S before, i'm doing this after my Stock ROM 2.3.3GB(baseband 71 and buildversion 3.0.1.G.0.75) in x10:
1)Xrecovery
2)FullWipe (Factory Reset)
3)Clear Cache Partition
4)Install Custom Zip from sdcard (Champ-Tof37-X10S-V8-2-Main.zip)
5)Started automatically (COPY DELETE Files,SYSTEM and etc.) and ''Installed Successfully''
6)Reboot Phone. (Updates Not Installed together.)
7)Sony Ericsson Logo then new XPERIA Logo and after 2-3minutes... Finally, Setup Guide.
Sincerely,
Whitefang
If this helps, pls kindly hit ''Thanks'' Button
whitefang3456 said:
Hello,
May i ask your previous ROM/Kernel/Baseband was? Was the Android OS 2.3.3 Rooted Gingerbread? Probably something to do with your previous installed thingy.
When i was installing x10S before, i'm doing this after my Stock ROM 2.3.3.
1)Xrecovery
2)FullWipe (Factory Reset)
3)Clear Cache Partition
4)Install Custom Zip from sdcard (Champ-Tof37-X10S-V8-2-Main.zip)
5)Started automatically (COPY DELETE Files,SYSTEM and etc.) and ''Installed Successfully''
6)Reboot Phone
7)Sony Ericsson Logo then new XPERIA Logo and after 2-3minutes... Finally, Setup Guide.
Sincerely,
Whitefang
Click to expand...
Click to collapse
I started frm AT&T Android 2.1(On purpose)because I have trouble rooting Android 2.3.3.But I've been waiting for 10 minutes.The kernel is stock kernel and baseband 2.1.54
Oh
c903jerk said:
I started frm AT&T Android 2.1(On purpose)because I have trouble rooting Android 2.3.3.But I've been waiting for 10 minutes.The kernel is stock kernel and baseband 2.1.54
Click to expand...
Click to collapse
Ah I see some differences. Perhaps x10S rom works for baseband 71, instead of your 54.
Extra:
Maybe you should restore to ur 2.1 ROM and visit SE official website for official 2.3.3 update through SONY PC COMPANION [MAKE SURE U BACKUP UR IMPORTANT FILES ALRIGHT ].
Even you didn't backup ur ROM, you may check SE website to for REPAIRING Your Phone Follow guide below:
http://forum.xda-developers.com/showthread.php?t=1504809
Then visit thread below for ROOTING OFFICIAL Gingerbread 2.3.3 for x10 Your Updated Baseband shd be 71, and Buildversion 3.0.1.G.0.75 in your updated x10.
http://forum.xda-developers.com/showthread.php?t=1196808 (Watch the tutorial video for ensuring your steps are precise)
It shd be fixed.
Sincerely,
Whitefang
Pls kindly Hit "Thanks" Button if this reply is helpful or convinces you
have you tried wiping dalvik?
whitefang3456 said:
Ah I see some differences. Perhaps x10S rom works for baseband 71, instead of your 54.
Extra:
Maybe you should restore to ur 2.1 ROM and visit SE official website for official 2.3.3 update through SONY PC COMPANION [MAKE SURE U BACKUP UR IMPORTANT FILES ALRIGHT ].
Even you didn't backup ur ROM, you may check SE website to for REPAIRING Your Phone Follow guide below:
http://forum.xda-developers.com/showthread.php?t=1504809
Then visit thread below for ROOTING OFFICIAL Gingerbread 2.3.3 for x10 Your Updated Baseband shd be 71, and Buildversion 3.0.1.G.0.75 in your updated x10.
http://forum.xda-developers.com/showthread.php?t=1196808 (Watch the tutorial video for ensuring your steps are precise)
It shd be fixed.
Sincerely,
Whitefang
Pls kindly Hit "Thanks" Button if this reply is helpful or convinces you
Click to expand...
Click to collapse
I'll try agiain tonight with a generic 2.1(Not AT&T) with 71 baseband.
c903jerk said:
I'll try agiain tonight with a generic 2.1(Not AT&T) with 71 baseband.
Click to expand...
Click to collapse
You can also try posting your Questions in Q&A...
Well, new update for Tablet Z2. According to this:http://www.xperiablog.net/2014/12/0...a-3-12-and-z2-tablet-23-0-1-a-4-44-in-taiwan/
yet another firmware update for tablet Z2 is rolling out right now. Newest buildnumber is 23.0.1.A.4.44. Previous was 23.0.1.A.4.30.
Seems that so far Taiwan region and also branded HK, SA, AE, KW are updated. Haven´t seeing any chance log.
Is this going to pose a threat to our root?
I am guessing towel root will not work because of the exploits being patched up in 4.4.4
Very good question....
Got my notification to update via PC a little while ago. Will see if I can trap it first
Suppose I will test the waters. Almost for sure root will be gone.
Most likely towelroot or any other roottool's based on that will not work. However flashing vulnerable kernel from 314 firmware, rooting it and flashing new firmware kernel back might work.
I'll check my tablet when I get home, I've gotten the notification for my z2 phone now.
Unable to update
Unable to install it,
updating via PC Companion, downloading update, but when tablet reboots i get the message from Companion that there is no update available.
I'm probably not the only one with that problem..
http://blogs.sonymobile.com/2014/11/04/our-latest-sony-software-upgrade-brings-ps4-remote-play-hi-res-audio-new-smart-social-camera-apps-more-for-xperia-z2-and-xperia-z2-tablet/#comments
I got the same thing happening to my tablet :/
Downloads, starts to update then just turns of the tablet and it fails.
Same here... update fails.
Envoyé de mon SGP511 en utilisant Tapatalk
I used this guide to intercept the download from PC Companion and create an FTF file.
I have no clue if it's a valid file, but here's the link (I have an SGP511):
<link removed>
Well that's nice. PC Companion says there's a new version, but it just downloads the old one
So I download firmware that Sony PC Companion offers as new .167 firmware and found out it is old .314 firmware . Have to wait.
MrMagic said:
I used this guide to intercept the download from PC Companion and create an FTF file.
I have no clue if it's a valid file, but here's the link (I have an SGP511):
https://mega.co.nz/#!nohxDQyD!u05pwh2yP_y8kWwhlS8pQAQbyeuiujlVyvTWUjJnFuM
Click to expand...
Click to collapse
And you are up and running with 4.4.4 and no issues?
SweDunda said:
And you are up and running with 4.4.4 and no issues?
Click to expand...
Click to collapse
I just edited my post and removed the link, since PC Companion says there's a new version available but it just downloads the old one
Update is working now. Installing... FALS ALARM !
EDIT: FFS ! It only reinstalled the old 4.4.2 !
There's some problems with Sony Server, wait for few hours...
Update is working now. Just finished the upgrade.
Can't root
Updated (Firmware 23.0.1.A.0.167).
Can't root via easyroottool V12.3 or towelroot v3.
I read rooting works if you flash the old .314 kernel first, then root, then flash back the .167 kernel. Didn't try it myself yet though.
Uploading a FTF for SGP511 now! Stay tuned!
Update is working right now. Everything's working fine!
Hey there, this is a Guide to Update the Xperia X Performance F8131 To the new Android 7.0 Nougat, also with a Small Review if you want to know what’s new, or you will wait for your region to be available.
I made this guide because i had an issue that i tried to flash the FTF via flash tool, but it is useless the flash tool needs to be updated before we can flash android 7.0 Updates. DO NOT TRY TO FLASH THE _39.2.A.0.327 YOU WILL BREAK THE SYSTEM OF YOUR PHONE. Also for those like me that doesn't want to wait for the update to be available in your region.
First of All i am not responsible of bricked phones by using this guide.
Review about the Software (WITH SCREENSHOTS)
Well First of All is that the lockscreen have a few New Changes for the notifications and the clock (its bigger Now)
Now the Quick Widgets in the notification bar are now small al of them.
Also the Wifi and antenna icons are slightly different
Now we have Stamina levels that we can Change to get better Battery.
On Camera we have the new Camera APP that Xperia XZ Has that can change many more things in manual mode.
Contact and Dialer have a few Changes.
It feels Slightly Faster than before, so you can check it up.
Thats all i can tell from now, we will see in the time.
Process to do the Update:1- You will need the latest flash tool available, you can download it in http://www.flashtool.net/downloads.php if you don’t know how to use this tool, please search on the internet first.
2- You will need the software update F8131 35.0.A.1.275 Customized RU you can download it here: https://drive.google.com/file/d/0BxPbn7RHkJD1WElDV2xHMkhyMzg/view Thanks to [email protected]
3- What you will actually do, it’s to flash the 6.0 MM ftf on your phone for Russia because in that region it’s available to download OTA the Update for 7.0 Nougat.
4- Flash the downloaded FTF on your phone with the usual method (Remember to charge your phone at least at 80%, you will need that battery).
5- When your phone finished and booted, just connect to a Wireless Network and go to settings ----> About Phone -----> Software Update and click update and let it work.
6- You will do 2 updates, one to the 6.0 Update .297 and then the 7.0 Nougat update will be available.
7- Enjoy the new software Update
The flashtool has updates for F8132. I just tried the Russian 39.2.A.0.327 and it didnt work... Im trying the same update but from Taiwan... Hope it works I think its the Nougat update..
nickcaper said:
The flashtool has updates for F8132. I just tried the Russian 39.2.A.0.327 and it didnt work... Im trying the same update but from Taiwan... Hope it works I think its the Nougat update..
Click to expand...
Click to collapse
No one Nougat will be flashed successful by old flashtool
Desperanto86 said:
No one Nougat will be flashed successful by old flashtool
Click to expand...
Click to collapse
Is the new Flashtool version out? Cant seem to find a version that allows nougat flash... Sux... Cause Nougat is now out for this X Performance... Officially OTA..
nickcaper said:
Is the new Flashtool version out?
Click to expand...
Click to collapse
nope http://forum.xda-developers.com/showthread.php?t=920746&page=336 and http://www.flashtool.net/index.php
Desperanto86 said:
nope http://forum.xda-developers.com/showthread.php?t=920746&page=336 and http://www.flashtool.net/index.php
Click to expand...
Click to collapse
I think this will be my last Sony product.. This company is half ass....
nickcaper said:
I think this will be my last Sony product.. This company is half ass....
Click to expand...
Click to collapse
It's your problem. Everyone doesn't give a damn on your opinion.
Desperanto86 said:
It's your problem. Everyone doesn't give a damn on your opinion.
Click to expand...
Click to collapse
seems you gave a dam enough to type all them words out... :laugh:
BTW.. Youre now muted... k bye...
If you install the nougat what do you need to wipe in flashtool
Has anyone tried going straight to nougat with the new flashtool?
http://www.xperiablog.net/2016/12/21/flashtool-update-0-9-23-0-brings-android-nougat-support/
Came from ab htc, not looking to make a brick
Sent from my F8131 using XDA-Developers mobile app
sssssbarn said:
Has anyone tried going straight to nougat with the new flashtool?
http://www.xperiablog.net/2016/12/21/flashtool-update-0-9-23-0-brings-android-nougat-support/
Came from ab htc, not looking to make a brick
Sent from my F8131 using XDA-Developers mobile app
Click to expand...
Click to collapse
Trying to flash F8132 to Nougat directly with Flashtool and I get an error:
Code:
10/018/2017 17:18:45 - INFO - Device connected in flash mode
10/018/2017 17:18:45 - INFO - Opening device for R/W
10/018/2017 17:18:45 - INFO - Start Flashing
10/018/2017 17:18:45 - INFO - No loader in the bundle. Searching for one
10/018/2017 17:18:53 - INFO - No matching loader found
10/018/2017 17:18:53 - WARN - No loader found or set manually. Skipping loader
10/018/2017 17:18:53 - INFO - Ending flash session
10/018/2017 17:18:53 - ERROR - null
10/018/2017 17:18:53 - ERROR - Error flashing. Aborted
Any toughts?
chiobesek said:
Trying to flash F8132 to Nougat directly with Flashtool and I get an error:
Any toughts?
Click to expand...
Click to collapse
What boxes did you check off before flashing?
will this work for flashing on US ver. ?
i got one from Amazon US and the fingerprint is disabled. will this work if i flash the UK firmware?
sorry for the noob question. i don't want to brick it. just want US ver --> UK stock firmware change.
it asks for a fikin password