[APP][23-5-2012] Samsung Galaxy S III S Voice - "Network Error" Fix w/o Changing you
Samsung Galaxy S III S Voice leaked and if you have ICS rom in your phone then you can test of S Voice. S Voice has the promise to be one of the better voice command options for Android as compare to iphone siri
It's unclear what devices can and can't run the app right now. So far so you can take a chance to test it and report it at comment section
you can also install it by
1. Unrar the file and copy the apk file
2. Copy to system/app folder
3. Change permission to rw-r-r
restart phone.
BIG THANKS TO : Playout
• You MUST HAVE ICS ROM.
• If the apk is giving you parsing error then move the apk under data/app and set permission via Root Explorer or something as,
x x -
x - -
x - -
BUG FIX - "Network Error" Fix w/o Changing your build Prop
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PRESS THANKS IF YOU LIKE IT
http://www.mediafire.com/?cr133uyjyddc1aj
http://www.4shared.com/android/jTCWeXO7/svoice-signed.html
Dropbox Mirror
https://dl.dropbox.com/s/ygskrtyufx6qn7x/svoice-signed.apk?dl=1 - Currently down
dl
mediafire blocked at my workplace and dropbox link dead "Too much traffic" congrats
Report
It doesn't work as expected. Speech recognition and responses are very cool, but the app gets stuck almost every time after the first response. :-(
amit.meena05 said:
Samsung Galaxy S III S Voice leaked and if you have ICS rom in your phone then you can test of S Voice. S Voice has the promise to be one of the better voice command options for Android as compare to iphone siri
It's unclear what devices can and can't run the app right now. So far so you can take a chance to test it and report it at comment section
you can also install it by
1. Unrar the file and copy the apk file
2. Copy to system/app folder
3. Change permission to rw-r-r
restart phone.
• You MUST HAVE ICS ROM.
• If the apk is giving you parsing error then move the apk under data/app and set permission via Root Explorer or something as,
x x -
x - -
x - -
PRESS THANKS IF YOU LIKE IT
http://www.mediafire.com/?m7mu6pdt0b63dul
Dropbox Mirror
https://www.dropbox.com/s/aaratzvdvea9dsv/voicetalk.apk
Click to expand...
Click to collapse
Any credits to original thread?
opera38205 said:
mediafire blocked at my workplace and dropbox link dead "Too much traffic" congrats
Click to expand...
Click to collapse
Try this
http://uploaded.to/file/itkvz5ej
emyller said:
It doesn't work as expected. Speech recognition and responses are very cool, but the app gets stuck almost every time after the first response. :-(
Click to expand...
Click to collapse
it will only work on ICS and it must be rooted
myawan said:
Any credits to original thread?
Click to expand...
Click to collapse
Already thanks to original thread
amit.meena05 said:
Already thanks to original thread
Click to expand...
Click to collapse
Your thanks alone won't do.
Put the credits tag on your post and link the original thread
guys please report in comment section that is s voice is working or not
Network Error
This is the original thread
http://forum.xda-developers.com/showthread.php?t=1662255
I also read there that you need to change your build.prop to make it work if you get "network error" you know if i get problems with any app if i do that modification? using HepHappy Final build, thx
DieGo316 said:
This is the original thread
http://forum.xda-developers.com/showthread.php?t=1662255
I also read there that you need to change your build.prop to make it work if you get "network error" you know if i get problems with any app if i do that modification? using HepHappy Final build, thx
Click to expand...
Click to collapse
To Fix EDIT MOD :
To fix the network error, edit two lines in the build.prop to add GT-I9300
The 2 lines should look like the following:
ro.product.device=GT-I9300
ro.product.model=GT-I9300
amit.meena05 said:
it will only work on ICS and it must be rooted
Click to expand...
Click to collapse
It is ICS. And, obviously, it's rooted.
[AOKP, build #36]
Can I install S Voice in normal or i have to copy it to system/app
emyller said:
It is ICS. And, obviously, it's rooted.
[AOKP, build #36]
Click to expand...
Click to collapse
then it will be work fine
Newbie256 said:
Can I install S Voice in normal or i have to copy it to system/app
Click to expand...
Click to collapse
1. Unrar the file and copy the apk file
2. Copy to system/app folder
3. Change permission to rw-r-r
restart phone.
normal;
it works if you install it normally
amit.meena05 said:
To Fix EDIT MOD :
To fix the network error, edit two lines in the build.prop to add GT-I9300
The 2 lines should look like the following:
ro.product.device=GT-I9300
ro.product.model=GT-I9300
Click to expand...
Click to collapse
What is the file that Ineed to edit??
Thank you!!
Sent from my GT-I9100 using Tapatalk
opera38205 said:
it works if you install it normally
Click to expand...
Click to collapse
you can try else you have to copy app in system /app
I got it installed, placed in the system/app folder. Changed the build.prop files. I still get a DC after asking it to call someone.
Any ideas or thoughts on getting it to stop fc-ing? Also I find this weird, I had 45% power before hand. Now I'm at 17%. Check out the drop in my screenshoot.
Sent from my iPhone killing White Epic 4G Touch. Running milestone5 AOKP.
pabligeno said:
What is the file that Ineed to edit??
Thank you!!
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
To get the S-Voice to work..
1A. You need ICS, if your on GB, ttyl
1B. You NEED rooted device
1C. Do NOT directly install like a regular APK
2A. Open the apk file on your PC with WinZip / 7Zip
2B. Extract "libsvoxtts.so" from \lib\armeabi\
2C. Transfer both these files to your ICS device or you can push via adb
3A. Copy the voicetalk.apk (i tested with this name) to /system/app
3B. If there no space, remove some apks not required pref by Titanium Backup
3C. Copy the voicetalk.apk with say ES Explorer or via ADB PUSH
3D. Change permission of voicetalk.apk to rw,r,r
3E. Press and hold >> Properties >> Change (ES Explorer)
3F. Copy the libsvoxtts.so to /system/lib (do check this is required or not)
4A. Edit build.prop (with build.prop Editor or manually)
4B. Edit property ro.product.device with value GT-I9300
4C. Edit property ro.product.model with value GT-I9300
5A. Restart Phone
5B. Start S Voice from launcher
5C. I saw during setup trying to change Hi Galaxy to your own command crashed the app.
Related
First of all this is my first HowTo so please bear with me and my language
Disclaimer:
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about installing this app! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
I was trying to install Honeycomb music application on my lg p500 but simply installing the apk was not doing the job for p500 user
so i just searched a lot for installing this application on my rooted optimus one i found the procedure and i have just shortened it.
I was running this app on void echo but i should also run on other roms
but first have a look that how does this app look alike
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Instruction of installing
Edit: before you continue, please backup the orignal Music.apk from /system/app in case the methods fails for you
edit : before you try steps below just give a try installing music.apk like any other apk. If installer gives u a error "application not installed" then follow these steps given below
a.) adb method (recommended)
1) First of all copy these 2 file in root of your sd card (click to download)
Music.apk
libjumper.so
2) turn on usb debugging in phone
3) now open adb shell and use these commands
Code:
adb shell
su
# mount -o remount,rw -t yaffs2 /dev/block/mtdblock1 /system
# cd sdcard
# cp Music.apk /system/app
# cp libjumper.so /system/lib
# reboot
(alternatively you can also write the above core in terminal emulator )
4 now the phone will reboot and you should have your music player replaced
if you did'nt find any changes or found music app missing repeat the above steps and reboot phone one more time
b.) directly through file manager(does'nt worked for me but you can try)
1) First of all copy these 2 file in root of your sd card (click to download)
Music.apk
libjumper.so
2) now open any rooted file explorer such as su file manager or root explorer
3) now copy libjumper.so and paste it in your system/lib folder (if you are not able to copy then pz check to mount the folder as r/w
4) now copy Music.apk to system/app folder ( it will replace the original app )
5) restart your phone
hope you liked the tutorial and i cannot guarantee it working on your phone though it work on every phone if steps followed correctly.
when i do it with adb. I get always a error message no such file/ or directory, but the two files are in the root folder of my sd card. Can you help me out?
mikescho said:
when i do it with adb. I get always a error message no such file/ or directory, but the two files are in the root folder of my sd card. Can you help me out?
Click to expand...
Click to collapse
Yes, he forgot to say that you have to write:
cp /sdcard/Music.apk etc...
Same for libjumper.so
EDIT: I'm on CM7 and i manage to replace the music app(via the adb method), but it crashes everytime i try to open it. Let me know if you know how to do it properly.
i cannot gaurantee u to run it on cm7 because it is in alpha stage and it has so many bugs try it any froyo rom
Sent from my LG-P500 using XDA App
doesnchot work on me. im on void echo too.. hmmm
sahilisburman said:
i cannot gaurantee u to run it on cm7 because it is in alpha stage and it has so many bugs try it any froyo rom
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
No problem, thank you anyway. I'll keep posted to see if you manage to get it work even on 2.3 roms.
peacekeeper05 said:
doesnchot work on me. im on void echo too.. hmmm
Click to expand...
Click to collapse
It works definatly on void echo coz i am using it currently on echo do it one more time and reboot ur phone.
Sent from my LG-P500 using XDA App
how to install on LG GT540 gyngerbread 2.3.2?
it didn't work on CM7 alpha 3.
ame85 said:
Yes, he forgot to say that you have to write:
cp /sdcard/Music.apk etc...
Same for libjumper.so
EDIT: I'm on CM7 and i manage to replace the music app(via the adb method), but it crashes everytime i try to open it. Let me know if you know how to do it properly.
Click to expand...
Click to collapse
for cm7 i just removed the old one
rebooted and instaled this musik.apk
and works nice.
ciolnadu said:
for cm7 i just removed the old one
rebooted and instaled this musik.apk
and works nice.
Click to expand...
Click to collapse
So I first have to remove the old one, and then follow the procedure?
no
just remove the old one
reboot your phone
and then install the new apk just like installing any apk
this worked for me
ciolnadu said:
no
just remove the old one
reboot your phone
and then install the new apk just like installing any apk
this worked for me
Click to expand...
Click to collapse
On certain roms application does more installs so this tutorial is for those rom which gives an error while installing
Sent from my LG-P500 using XDA App
i have rebooted for almost 10x now. still no music app showed. this may sound silly but do i need to install the orginal music app first for this to work cause i dont have any music app.
ciolnadu said:
no
just remove the old one
reboot your phone
and then install the new apk just like installing any apk
this worked for me
Click to expand...
Click to collapse
Mmmh not working..Must have done something wrong. What about the libjumper.so file? Do you put it into the system/lib folder? Or you just install the apk and ignore the .so?
ok just to be sure.. what if some error comes how do i restore it to previous music player
firs i follwed that proccedure
but the apk gave me many FC
so i think it's ok if u copy that lib
try that too
bharathbala2003 said:
ok just to be sure.. what if some error comes how do i restore it to previous music player
Click to expand...
Click to collapse
u can always do a backup using titanium backup
ame85 said:
Mmmh not working..Must have done something wrong. What about the libjumper.so file? Do you put it into the system/lib folder? Or you just install the apk and ignore the .so?
Click to expand...
Click to collapse
copy that libjumper
i just soo that i have 2 music icons
1 from music apk
and 1 from libjumper
bharathbala2003 said:
ok just to be sure.. what if some error comes how do i restore it to previous music player
Click to expand...
Click to collapse
1)do a backup copy of the original .apk
2)Remove, by a root file manager, the libjumper.so and music.apk from the folders where you copied them
3)Copy the default music.apk to your sdcard
4)Debug mode
5)refollow the procedure above, ignoring the libjumper.so line
6)Done
I've done this three or four times, so I know it works
Want that new xperia launcher on your phone? Then mumble no more.
This mod will enable you to use the Xperia launcher plus timescape widgets on your Optimus One android phone
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER: I AM NOT RESPONSIBLE FOR ANYTHING BLAH BLAH BLAH ETC.
WHAT YOU NEED
1. The flashable zip files containing the actual launcher and SE widgets(Download here)
2. Terminal emulator(free from market)
3. Executable script to modify build.prop(Download here)
INSTRUCTIONS
1. Make sure that the executable script(AKA "build") is placed in the root(meaning the base) of your SD card.
2. Using terminal emulator, input this command.(press enter after each line)
Code:
su
sh /sdcard/build
--this should change your build's manufacturer from LGE to Sony Ericsson--
--if an error appears, take note of the error message and post it here--
3. Reboot to recovey and flash SE_timescape.zip
4. Enjoy!!!!!
SMALL WARNING:
No undo.zip as of now, so if you're kind of fidgety on what's in your phone, stay away for now. But, if you have basic knowledge in removing system files, just fiddle with the zip file and you'll know exactly what to remove.
Bugs(help needed):
-app drawer button is placed a little bit high
-photo and video widget may present some errors
Thanks to cygnus of samdroid.net. Click here to visit the original thread
can i see the screenshot?
Screenies are up. I hope you like her, er I mean them.
Yo ungaze-dude you just posted wrong link you posted ungaze's data2sd link.
So that's why there's no one downloading the zip file. Thanks for pointing it out man.
Link fixed
i get this error in terminal "sed: -i requires an argument "
aragarm said:
i get this error in terminal "sed: -i requires an argument "
Click to expand...
Click to collapse
funny, that shouldn't happen. try to re-download. this time I uploaded the one I actually used on my phone.
i am currently using se launcher (for xperia) how is it different with that? Also app drawer button is not high for my launcher.
This launcher sucks. App Drawer doesn't show all apps.
good work man ! but the timescape font is HUGE!
looks ugly :/
it wieked on CM 7.0.2 )
i flashed this archive into recovery
and before i changed this string in build.prop
ro.product.manufacturer=LGE
to
ro.product.manufacturer=Sony Ericsson
neimovirne said:
it wieked on CM 7.0.2 )
i flashed this archive into recovery
and before i changed this string in build.prop
ro.product.manufacturer=LGE
to
ro.product.manufacturer=Sony Ericsson
Click to expand...
Click to collapse
That's exactly the same procedures as the 1st post.
the downloadable "build" script will automate the build prop change needed, while the SE_timescape.zip is a signed(edify) version of SEUX.zip.
About the fonts, YEP they're ugly alright(as you can see on my screenies) I wasn't really planning to use timescape but I really wanted the photo and video widget to work. So if anyone can help here, I'd greatly appreciate it.
Another thing, I wanted to use the SE launcher from this thread but was unsuccessful. Again, if anyone can help out, please do.
Even though it has a few bloats, I still like this launcher(+ photo widget and folders - really cool). I also think it's really fast. I don't have much time to tinker right now so any help would be greatly appreciated.
ungaze said:
That's exactly the same procedures as the 1st post.
the downloadable "build" script will automate the build prop change needed, while the SE_timescape.zip is a signed(edify) version of SEUX.zip.
Click to expand...
Click to collapse
where do you see in the first post at least one file for flash recovery?
neimovirne said:
where do you see in the first post at least one file for flash recovery?
Click to expand...
Click to collapse
WHAT YOU NEED
1. The flashable zip files containing the actual launcher and SE widgets(Download here) <-----HERE?!?!?!?!?!?
2. Terminal emulator(free from market)
3. Executable script to modify build.prop(Download here)
Click to expand...
Click to collapse
Did you get to read the post?
ungaze said:
Did you get to read the post?
Click to expand...
Click to collapse
I downloaded this archive but it was not clear files, not like in the archive that sent me
and by the way, on my phone works all widgets
neimovirne said:
I downloaded this archive but it was not clear files, not like in the archive that sent me
and by the way, on my phone works all widgets
Click to expand...
Click to collapse
I really don't know where you're getting at but trust me, both files are one and the same(only difference is with the update scripts which can be fixed by toggling signature verification). Anyways I've re-uploaded the SE_timescape.zip which is now compatible with all optimus one recoveries.
Have you tried the large photo widget? Did it work for you?
BTW, here's a screenie of the pinch gesture, really nice:
Can we use this on the optimus s? I would love it
cmyasika1 said:
Can we use this on the optimus s? I would love it
Click to expand...
Click to collapse
yes but don't do the steps in RED
WHAT YOU NEED
1. The flashable zip files containing the actual launcher and SE widgets(Download here)
2. Terminal emulator(free from market)
3. Executable script to modify build.prop(Download here)
INSTRUCTIONS
1. Make sure that the executable script(AKA "build") is placed in the root(meaning the base) of your SD card.
2. Using terminal emulator, input this command.(press enter after each line)
Code:
su
sh /sdcard/build
--this should change your build's manufacturer from LGE to Sony Ericsson--
--if an error appears, take note of the error message and post it here--
3. Reboot to recovey and flash SE_timescape.zip
4. Enjoy!!!!!
Click to expand...
Click to collapse
Instead, manually change your build.prop by changing this line:
ro.product.manufacturer=LGE
Click to expand...
Click to collapse
into this:
ro.product.manufacturer=Sony Ericsson
Click to expand...
Click to collapse
or you could follow this thread specifically for optimus S:
androidcentral.com courtesy of captmeach7
ungaze said:
yes but don't do the steps in RED
Instead, manually change your build.prop by changing this line:
into this:
or you could follow this thread specifically for optimus S:
androidcentral.com courtesy of captmeach7
Click to expand...
Click to collapse
So do I just flash the zip?
Where do I change the build.prop at? And will the SE widgets work?
Please can a mod move this to the right place, i think its either android themes or android software development, thanks
Ok I've has quite a few people asking me how to make the Sense 3 navbar semi-transparent so here is a guide on how to do it...
btw, sorry for terrible paint skills
Firstly download the latest m10 tools from here, thanks to Diamondback and Flemmard
Then extract them to somewhere on your computer and open m10editor
Once that is done open up Rosie.apk in the editor by selecting load file and navigate to where its saved on your computer
Once its decompiled Rosie navigate to m10 Files and select Rosie_Workspace.m10 and decompile it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Expand the lines like this,
look for btn.navbtn_side_anim-Centre, btn.navbtn_side_anim-Left and btn.navbtn_side_anim-Right
change these opacity values from 1 to 0.75
look for 2 navbar.png
and change them from 1 to 0.5
Navigate back to the Start and click save
Push it to your phone to see if it worked
Done!
Image editing
Ok, so I'm going to be editing the lockscreen ring as an example, you will need to edit the files in idlescreen_base.apk and fusion.apk in order to fully change it
Im only going to show the idlescreen_base.apk part because its really repetative
As always you are going to need the latest version of m10 tools
and don't resize images, you will break them!
Open up the m10 editor
Press load file and navigate to where idlescreen_base.apk (or whatever other .apk your editing) is
Once it's un-zipped navigate over to m10 files
Make sure 'decode images' is ticked
Then double click 'Lock_ring_motion.m10' and decomplie it
Now expand the bars until you get to 'Textures', this is where the images are
Click on each texture until you find the one you want (note images are upside down)
Right click on the image and press 'Show in Explorer'
Then right click on it in the explorer and press 'open with' and use the program of choice (I use photoshop) and edit it how you like
Then save it using the same name in the same place
Then navigate back to 'Start' and press 'Save file'
Push it and reboot to see if it worked
Done!
Reserved 2...
thanks for that
can we do the same with app drawer?
Nyto75 said:
thanks for that
can we do the same with app drawer?
Click to expand...
Click to collapse
app drawer is xml so i would say no
Works perfect thanks!!
As for app drawer though I dont seem to be able to get it to work, also rosie is acting weird, my original rosie is over 12mb and using m10 tool it stays that size, if i decompile and recompile with apktool it goes down to less than 2mb
Gonna try and work out this rosie app drawer.... lol
The load file button is matt, so I can't load rosie.apk
polimeno said:
The load file button is matt, so I can't load rosie.apk
Click to expand...
Click to collapse
you have to link to zipalign.exe and adb.exe
if you dont have these just make 2 text files and rename them to the above and link to them but then make sure you dont try and push directly to your phone and also untick the zipalign box when saving
Ok. With root explorer i navigate to /system/app/rosie.apk, then I copied it to sd card. I past rosie.apk to computer, but when M10 editor trying to unzip the apk, it says: unzipping failed
Thanks major damo.
I want to try this but got drunk last night and phone is completely dead! >.<
Unzipping failed
polimeno said:
Ok. With root explorer i navigate to /system/app/rosie.apk, then I copied it to sd card. I past rosie.apk to computer, but when M10 editor trying to unzip the apk, it says: unzipping failed
Click to expand...
Click to collapse
same problem...
i also linked ADB and Zipalign from android sdk folder and when i load the rosie.apk it says: Unzipping failed..
Here is the Log:
Loading file: C:\IncertCoin23+24\Rosie.apk
ZipTool: Deleting old Directory: C:\Users\Walid\AppData\Roaming\M10Editor\Rosie
ZipTool: Error: Assets directory not created!
ZipTool: Are you sure the selected APK does contain m10-files?
ZipTool: Ending
Unzipping failed
bytheway...i'm in windows 7 and as u can see i'm using Insertcoin v24(data ++) version..
_Burst_ said:
Thanks major damo.
I want to try this but got drunk last night and phone is completely dead! >.<
Click to expand...
Click to collapse
who got drunk you or your phone...
musvi said:
same problem...
i also linked ADB and Zipalign from android sdk folder and when i load the rosie.apk it says: Unzipping failed..
Here is the Log:
Loading file: C:\IncertCoin23+24\Rosie.apk
ZipTool: Deleting old Directory: C:\Users\Walid\AppData\Roaming\M10Editor\Rosie
ZipTool: Error: Assets directory not created!
ZipTool: Are you sure the selected APK does contain m10-files?
ZipTool: Ending
Unzipping failed
bytheway...i'm in windows 7 and as u can see i'm using Insertcoin v24(data ++) version..
Click to expand...
Click to collapse
I didn't know insertcoin was sense 3, this only works on rosie from sense 3, rosie from earlier versions of sense don't contain any m10 files so this method can't be used
HTC Swyped from my Sense 3 Desire using XDA Premium
*damo* said:
I didn't know insertcoin was sense 3, this only works on rosie from sense 3, rosie from earlier versions of sense don't contain any m10 files so this method can't be used
HTC Swyped from my Sense 3 Desire using XDA Premium
Click to expand...
Click to collapse
oh thanks for enlightening me....hey can i push the sense 3 rosie.apk in sense 2.1 rom and will that work....
thanks..
musvi said:
oh thanks for enlightening me....hey can i push the sense 3 rosie.apk in sense 2.1 rom and will that work....
thanks..
Click to expand...
Click to collapse
lol, no, it will just fc, you could probably do it by changing some framework but then you may as well just use a sense 3 rom
*damo* said:
lol, no, it will just fc, you could probably do it by changing some framework but then you may as well just use a sense 3 rom
Click to expand...
Click to collapse
okk...thanks for being nice to me.....i'm totally noob here...i had been following the sense 3 dev thread...but afraid of loooootz of bugz.is it stable enough to use in everyday basis?
so when i go to edit the m10 and find the btn.navbtn_side_anim-Center and the others when i click on them there is no opacity setting to edit....help?
musvi said:
okk...thanks for being nice to me.....i'm totally noob here...i had been following the sense 3 dev thread...but afraid of loooootz of bugz.is it stable enough to use in everyday basis?
Click to expand...
Click to collapse
Soon, we've got most things fixed now
HTC Swyped from my Sense 3 Desire using XDA Premium
parham1234 said:
so when i go to edit the m10 and find the btn.navbtn_side_anim-Center and the others when i click on them there is no opacity setting to edit....help?
Click to expand...
Click to collapse
No idea maybe your doing something wrong
HTC Swyped from my Sense 3 Desire using XDA Premium
delete
got sorted in next post
Thread again open to request users.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Before installation make backup in CWM. Everything what you are doing is at your own risk !
Results for my country - the result will be different for each country.
Without PFGPS - 2400 seconds Fixed - apply xda qfix
PFGPS FIX v2.0 :
- First start - 9 seconds - Fixed
- Second start (reconnection) - 2 seconds - Fixed
- Accuracy 3-7 meters
If you leave your country FIX automatically switches to to another best location .
It is not possible to create TWEAK for the whole world. Users can try and choose which version is best for him.
Version 2.0 has 6 different version (version A, B ,C, D, E, F) Earliest try each version and then select verion which was the best for you.
Download: http://www.multiupload.com/4S38925QR4
Extended support for Hungary & Bosnia and Herzegovina:http://www.multiupload.com/PHH5AZ2YN3
If you chage ROM need flash my FIX again!
How install: Download this pack extract PFGPS to computer find your coutry and copy your Country to SDcard and install via CWM. (Without formating any file only replace gps file)
This FIX is build from my Xperia project data and android-servers souce.
Original Samsung Galaxy ACE GPS backup here: http://www.multiupload.com/C7G7SNNKMZ
#Tweak ported and customized by PFittech
#credits AngelDeaths & anddevs & PFittech
Thanks
downloading now
gonna try after backing up my current rom
---------- Post added at 04:50 AM ---------- Previous post was at 03:55 AM ----------
May be you done mistske in making update zip cause in cwm installetion aborted for india.zip
any way i replaced file manually by root explorer and then after reboot i check maps and now it show location more speedyly than before so thanks
Hey PFittech,
i can confirm its working for the Netherlands. Every time i use nav program gps locks within 60sec, even after phone reboot. THNX!!, again another annoying thing got rid off.
I also got an error on installing from sdcard, so had to put the files manually at the right place. After this i had to reboot 2 times for changes to take effect.
Cheers and again THNX.
Does this work on CyanogenMod 7 ?
Poland.zip installetion aborted too
Ireland aborted.
Sent from my GT-S5830 using xda premium
I think it's something wrong with updater-script
Forever living in my Galaxy Ace using XDA App
ChaosChris said:
Does this work on CyanogenMod 7 ?
Click to expand...
Click to collapse
Yes working with cm7 i tested
helo czech abort instal cwm
pls
write full path for copy manual ? thx
nims11 said:
Thanks
downloading now
gonna try after backing up my current rom
---------- Post added at 04:50 AM ---------- Previous post was at 03:55 AM ----------
May be you done mistske in making update zip cause in cwm installetion aborted for india.zip
any way i replaced file manually by root explorer and then after reboot i check maps and now it show location more speedyly than before so thanks
Click to expand...
Click to collapse
can u please tell which files to be replaced and where exactly to be replaced using root explorer m too from india. plz help
dm08b002 said:
can u please tell which files to be replaced and where exactly to be replaced using root explorer m too from india. plz help
Click to expand...
Click to collapse
Extract your zip file then there is two folder
go in system folder there is anothrr two folder one bin and second etc
so copy file inside bin folder to your phones system/bin/ and change permission to rwxr-xr-x
and file inside etc folder copy to your phones system/etc/ and change permission to rw-r-r
then reboot
can someone confirm if this works for Galaxy ACE?. If not working I delete my post I need feedback.
For those who had problems of instalaton I verify script.
I confermed already though i conferm you again its working properly with ace
prob was in update script
so i put all files manually and working awesomely so thanks again
OK, but it is very bad when it is not installed via a script.I dont have ACE I can not verify this. Could you tell me there is someone put a link to your ROM, i need to know the location of some files for editing. THX
PFittech said:
OK, but it is very bad when it is not installed via a script.I dont have ACE I can not verify this. Could you tell me there is someone put a link to your ROM, i need to know the location of some files for editing. THX
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=17576100&postcount=3
it is kernel of rom may it help to use its update script to you
and link of rom you asked
http://forum.xda-developers.com/showthread.php?t=1263292
PFittech said:
OK, but it is very bad when it is not installed via a script.I dont have ACE I can not verify this. Could you tell me there is someone put a link to your ROM, i need to know the location of some files for editing. THX
Click to expand...
Click to collapse
We usually use:
Code:
run_program("system/xbin/busybox" "mount" "/system")
for mounting /system .
And:
Code:
run_program("system/xbin/busybox" "unmount" "/system")
for unmounting /system .
This is also applied to /cache , /data , /sdcard and /sd-ext too !
work fast... thanks =)
For Brazil, it says Installation Aborted, but even replacing using the root explorer and setting up the permissions, my GPS still not locking up. It was working fine with the stock rom.
His update-binary must be problematic .
All files abort with status 0 .
Forever living in my Galaxy Ace using XDA App
for those who get this - Installation aborted. Your kernel does not support my script - amateur said. I'm sorry but I will not fix every file again. The second option is to Install here: @ nims11
Extract your zip file then there is two folder
go in system folder there is one folder anothrr two second bin and etc
Copy the file inside bin folder to your phone system / bin / and change permission to rwxr-xr-x
file and folder inside etc copy to your phone system / etc / and change permission to rw-rr
then reboot
my script works on Galaxy s1,s2 without problem . For Ace use instalatlion via root explorer. I wanted deleted this thread for ACE but someone wrote that it works via ROOT EXPLOLER.
Thnkx to my friend adib_17 from galaxy mini section for guiding me for this.
spent 4 days in learning and testing and now its working on carbon for me. file is flashable.
This tutorial show you how to port stock sam keyboard to a custom rom.
you need these files and folders ... take from your stock rom odin flashable file: (use magicIso or UltraIso)
- T9DB folder (from csc.rfs file)
- AxT9IME.apk and AxT9IME.odex (from system.rfs file in app folder)
- touchwiz.xml (from system.rfs file in etc->permissions folder)
- libdhwr.so and libXt9core.so (from system.rfs file in lib folder)
first deodex your AxT9IME.apk (see post #2)
make a flashable zip file and put stock files like this: (or use attachment zip file and delet my files and put your files.)
- T9DB folder in: yourzip/system/
- touchwiz.xml in: yourzip/system/etc/permissions
- libdhwr.so and libXt9core.so in: yourzip/system/lib
- deodex AxT9IME.apk in: yourzip/system/app
move zip file to SDcard and reboot to recovery(CWR) and select "install zip from SD". after install go to advanced menu and wipe dalvik cache.
finish! now reboot and use Samsung keyboard with your language.
# if your rom is odex go to system/app with root explorer, find AxT9IME.apk and AxT9IME.odex and add ".bak" to end of two files then reboot to recovery.#
Asian rom keyboard extracted from S5830DDKQ6 INDIA with this languages:
English(US)-English(UK)-France-polski-Korean-deutsch-espanolitaliano and many more (all rom have english and Korean)
Note : Before flashing got to system/app and rename your old keyboard and add .bak in the end of its name.
for example : if old keyboard is latin.apk and latin.odex then rename to latin.apk.bak and latin.odex.bak.
thats all now go into recovery
1. clear dalvik cache.
2. install my zip.
3. reboot enjoy samsung keyboard.
Added 2 new versions all files are flash-able via cmw recovery :
1. For voice input like this (in attachment) :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. swype keyboard original ( link )
Download link for swype :
http://www.mirrorcreator.com/files/P3TESM5K/swype_by_MOR.zip_links
How to deodex ...
Install Java Runtime Enviroment on your PC.
Download backsmali.jar and smali.jar from attachment.
Make a folder like edit in root of a drive (ex: C:\edit )
Put backsmali.jar and smali.jar files in this direction.
You need 7 odex file from stock framwork:
- android.policy.odex
- bouncycastle.odex
- core.odex
- core-junit.odex
- ext.odex
- framework.odex
- services.odex
Put all files in "edit" folder. Now put AxT9IME.odex file in this folder.
Run windows cmd (go to start menu, Run... and type cmd and then enter)
First line go to "edit" folder by insert this commend : (you can copy and past this comment from here)
Code:
cd\edit
Next, insert this line for backsmali AxT9IME.odex :
Code:
java -jar baksmali.jar -x AxT9IME.odex
Now you have a out folder. Don't touch it.
Insert this commend for smali your work :
Code:
java -jar smali.jar out
Now in "edit" folder you have a file like this: out.dex
Rename file to classes.dex , open your AxT9IME.apk with winRar (or any program like this) push your .dex file to .apk file ... WooW, now you deodex your fist android system app.
reserved for future use....
No need to take sooo much pain. I have already done that for ace users and its working - http://forum.xda-developers.com/showthread.php?p=21133980
No offence intended
Sent from my GT-S5830 using Tapatalk
tj_droid said:
No need to take sooo much pain. I have already done that for ace users and its working - http://forum.xda-developers.com/showthread.php?p=21133980
No offence intended
Sent from my GT-S5830 using Tapatalk
Click to expand...
Click to collapse
ya saw just now ur thread :
mine is flash-able with no errors
nothing much to do.
no offense.
OOPs wrong forum!!!
Prashanthme said:
OOPs wrong forum!!!
Click to expand...
Click to collapse
oops i didn't know it was wrong to post here hope mods can move it to appropriate place.
Hi,
Do you know how can I have Smiley in the Layout " Enter " ?
Thanks very much!
billouetaudrey said:
Hi,
Do you know how can I have Smiley in the Layout " Enter " ?
Thanks very much!
Click to expand...
Click to collapse
sorry bro no idea on this.
Dude thanks for this rocking guide :thumbup: we have a stock flashable keypad now ...i dunno if those guys refeered this guide but anyways a biggggggg thank youuuuuu
You know you are rooted when you use XDA more than FB
happy to know u liked my work thank you. my first thread was this.
thank me if i helped u.
mor_1228 said:
happy to know u liked my work thank you. my first thread was this.
thank me if i helped u.
Click to expand...
Click to collapse
Thanks button pressed
You know you are rooted when you use XDA more than FB
mor_1228 said:
sorry bro no idea on this.
Click to expand...
Click to collapse
OK really strange... On picture you have smileys but when I flash the zip on post, dont have smiley.... :-(
Sent from my Galaxy Nexus using XDA
billouetaudrey said:
OK really strange... On picture you have smileys but when I flash the zip on post, dont have smiley.... :-(
Sent from my Galaxy Nexus using XDA
Click to expand...
Click to collapse
how is it possible bro please show screen shot of ur keyboard.
mor_1228 said:
how is it possible bro please show screen shot of ur keyboard.
Click to expand...
Click to collapse
OK I do that tommorow ;-) pour thx
Sent from my Galaxy Nexus using XDA
Is it possible to port mms apk in similar way?
-Nishu
nishantmnit said:
Is it possible to port mms apk in similar way?
-Nishu
Click to expand...
Click to collapse
never tried that bro so will not recommend u this.
perfect
works perfect in lewa rom, CM7 based
hi
i have ideos u8150 with cm7 and i like the samsung y keyboard so i tried ur tut to port stock samsung keyboard to work in the cm7 in the ideos u8150 but i didnt work for me
can u help me with that ?
Will this method work for the physical keyboard on the captivate glide?
Sent from my SGH-I927 using Tapatalk 2