2012/08/22【ROM Release】【U8800 Pro】B876_KALO_Extreme (Porting Huawei Honor)
Hello Dear Community!
Today I decided to share my work, a customized rom based on the latest Gingerbread official ROM of the Huawei Honor U8860.
This porting wants to be the most light possible, avoiding the Huawei traces and trying to make difference with stability, speed and zero bugs.
This is a list of the rom features:
- Based on Gingerbread 2.3.6 – Official B876 (Firmware Huawei Honor U8860);
- Root permanent permission;
- Overclock kernel;
- Unlocked FPS limit (30 @ 55);
- Zipaligned apks;
- Added BusyBox;
- Removed Gallery 3D and replaced with QuickPic;
- Removed Huawei Launcher and replaced with Zeam Launcher;
- Corrected APNs list (only the Italian Internet Wind apn);
- Edited carrier name "Wind Telecomunicazioni Spa" into "WIND";
- Edited carrier name "Telecom Italia SpA" into "TIM";
- Edited carrier name "Hutchinson H3G Italia" into "3 ITA";
- Removed the stock Browser and replaced with Dolphin Browser HD;
- Updated Market (now Google Play), Google Search Box, FlashPlayer;
- Removed Social Huawei and other apks from the stock rom;
- Increased performance by editing build.prop;
- Enabled HDR function on camera;
- Removed File Browser and replaced with Root Explorer;
- Independence of the /cust partition;
- Removed WPS function on WiFi section;
- Removed ipcall function;
- Added the battery percentage on the status bar;
- Stock Android Gingerbread lockscreen;
- Removed the energy saving function;
- Bypass of the Android Settings Wizard;
- Optimized the GPS config for Europe;
- Tethering WiFi is available and works fine;
- Added by default the Quick Settings Widget in the notification bar;
- FM Radio works fine;
- Added function Volume Rocker Screen Wake Up;
- A new graphic for Contacts and Phone applications;
- Removed Fast Boot option;
- Patched the libsqlite.so for better performances;
- Disabled bugreports generation in kernel ramdisk;
- Permanent Root Access;
- No more is needed SuperUser.apk for root-based applications;
- The default video codec for High Video Recording Quality is H264;
- The default audio codec for High Video Recording Quality id AAC;
- Edited the carrier name "Sonaecom - Serviços de Comunicações, S.A." into "Optimus";
PREREQUISITES - ATTENTION PLEASE
a) ROM
Gingerbread 2.3.5 Stock Huawei version (B512, B521, B540, B552, B565, B572)
or any customized Gingerbread ROM (CyanogenMod, MIUI, 2.3.5, 2.3.6, 2.3.7)
or any ICS Rom (DZO Aurora, Genokolar MIUI v4);
b) Recovery
CWM Recovery 5.0.2.7
If you have the stock recovery, you will not be able to install any customized ROM. So, you have to do these steps: download the CWM Recovery 5.0.2.7 (previous link to download the file), power off your device and turn on into Pink Screen Mode (holding down VOL+, VOL- and Power button). Plug in your usb cable to your pc and wait for the automount of the new drive. Navigate to the /image folder and rename the stock "recovery.img" into "recovery.bak".
Now simply copy the CWM Recovery into the /image folder and be sure that its name is "recovery.img", otherwise you have to rename it into "recovery.img".
Unmount the periferic, remove the usb cable and extract the battery to shutdown the phone. That's all.
You can verify the new recovery installation entering in recovery mode (holding down VOL+ and Power button).
INSTALLATION PROCEDURE FOR FULL PACKAGE
0) Make sure that you have installed all prerequisites;
1) Download the zip file of the rom with your pc;
2) Shutdown your smartphone and to be really sure unplug the battery;
3) Insert your battery and power on your smartphone into recovery mode holding down VOL+ and the power button (be sure that you have the CWM 5.0.2.7);
4) Go to advanced ---> reboot recovery;
5) At the new recovery boot go to "mount and storage";
6) Mount usb storage;
7) Plug in your usb-microusb cable;
8) Copy the downloaded zip file into the external sdcard;
9) Wipe data/factory;
10) Wipe cache;
11) Wipe Dalvik Cache;
12) [OPTIONAL if you experience a huge battery drain only] Wipe Battery Stats;
13) Go to "mount and storage", then "format /system";
14) Install zip from sdcard;
15) choose zip from sdcard and select the downloaded zip file;
16) Install complete!
17) reboot system now.
Please wait about 2 minutes for the install process and be patient for the first boot.
At the first boot the default language has been set to English. This choise because the rom needs to be more international possible.
Anyway the rom is multilanguage and offers the default available languages of the stock Android base-rom.
The default keyboard is the stock Android Latin.
DOWNLOAD
Date: 2012/08/22
File name: B876_KALO_Extreme.zip
Changelog: Increased the 3G speed, fixed the network dropping from 2G/3G, updated applications.
If you appreciate my work and want to thank me, please send a donation, it's a huge reason to keep alive this Android project for U8800 Pro.
DONATE (PayPal)
FaceBook Group Page -----> KALO ANDROID U8800 Pro
Special thanks:
- Genokolar (kernel and recovery Guru);
- mik_os (libsqlite.so tweaks);
- pikachukaki (theme creator and tester for his B876 based-ROM);
- zontovolo (the best beta-tester I've seen!);
- cuvetto (for the better audio experience);
- merafly (for his advices and suggestions);
- tasosmrs (for the modded phone.apk)
- All users who are using/testing my releases;
SPECIAL THANKS TO DONATORS:
- Nektarios Orfanidis;
- Pavel Igorevich;
- Denis Avetsuk;
- Eugenio Livio;
- José Alexis Morera Fernández;
Happy flashing!
kalo86
At least a dev...good work m8...keep up this good work!!Can i suggest talking roms from anzhi and modify them like you wish to make them better??Keep up don't stop!
pikachukaki said:
At least a dev...good work m8...keep up this good work!!Can i suggest talking roms from anzhi and modify them like you wish to make them better??Keep up don't stop!
Click to expand...
Click to collapse
Thank you! I hope you try my rom, I repute it very very fast and stable.
I have tested B512, B540, B552, B565, B572, B866 (Honor porting), B872 (Honor porting), B876 (Honor porting).
I have always customed these official roms and I have to admitt that the latest B876 is the most powerfull, very stable and I am not finding bug at the moment.
I prefer to take the stock rom from the official Huawei zip and customize the content making a good working rom.
You are right, the anzhi forum is very rich of content, a lot of people upload roms daily.
Regards
kalo congratsulations,,,
first of all thank you, for trying to help me with cygwin kitchen the other days ,for cooking my rom but unfortunatelly my pc betrayed me...
i think that THIS IS the most serious work,,i've ever seen for our phones....
i hope with this work ,you make me leave my moddified 2.2.2 stock rom...
and a question,,by saying [Stock 2.6.35.7 kernel with default CPU frequencies...... you mean no o/c ??]
CONGRATS AGAIN
today you make me really happy
Hi gkalenis!
It's a pleasure for me to read your words and I really like to help people with my works. This rom makes you smartphone like a new one, but a better one!
Try it and enjoy yourself!
Thank you very much for your thanksgiving
Regards,
kalo86
i'll wait a little more (not to long )
and i hope to continue with developing ,,and not loose you
great ,great ,great
for sure ,you make my day
awesome ROM mate. Gonna try this. Thanks a lot
Sent from my U8800Pro using XDA
ics
great man. Can you please port the ICS from Honor? (stock like, only basic tweaks as hdr, overclocking, fps, root, init.d) Because the dzo's is not too stable.
thx mate
Any Review About This ROM?
---------- Post added at 12:24 PM ---------- Previous post was at 11:36 AM ----------
It Have Swype Keyboard?
What languages?
Anyway, great job!
husen4u said:
Any Review About This ROM?
---------- Post added at 12:24 PM ---------- Previous post was at 11:36 AM ----------
It Have Swype Keyboard?
Click to expand...
Click to collapse
It has the stock Android latin keyboard.
Filatov.p said:
What languages?
Click to expand...
Click to collapse
The rom is multi language, it has the default Android languages.
linomaniac said:
great man. Can you please port the ICS from Honor? (stock like, only basic tweaks as hdr, overclocking, fps, root, init.d) Because the dzo's is not too stable.
thx mate
Click to expand...
Click to collapse
Hi, at the moment ICS is not my "goal" because it is buggy (also for Huawei Honor). When time becomes mature I will port a good base from U8860.
In the meanwhile I hope to find better kernel sources, maybe specific for ICS, like 3.0.X kernels.
This is a full-working Gingerbread and it apperas bugless, it's ready for daily use.
Regards,
kalo86
kalo86 said:
In the meanwhile I hope to find better kernel sources, maybe specific for ICS, like 3.0.X kernels.
Click to expand...
Click to collapse
I like the way you're thinking. This is the right way to make a real ics rom.
fantastic! finally an italian dev! I've just installed rom and I already love it! I'll post my impressions about long use...
vispo60 said:
fantastic! finally an italian dev! I've just installed rom and I already love it! I'll post my impressions about long use...
Click to expand...
Click to collapse
Good then! I am not finding problems after 3 days no-stop ;-)
No missed calls;
No missed SMS;
WiFi, Bluetooth, GPS are working properly;
Always fluid and very fast.
B876 is a good base-rom!
kalo86 said:
...........
This is a full-working Gingerbread and it apperas bugless, it's ready for daily use.
Regards,
kalo86
Click to expand...
Click to collapse
hi, and what is with the "vanishing media files" bug? Is corrected on your rom?
linomaniac said:
hi, and what is with the "vanishing media files" bug? Is corrected on your rom?
Click to expand...
Click to collapse
Hi, what is this "vanishing media files" bug?
kalo86 said:
Hi, what is this "vanishing media files" bug?
Click to expand...
Click to collapse
for example:
http://epiccm.blogspot.com/2012/03/details-on-disappearing-sd-media-issue.html
it seems to be a brand-independent bug of android os.
I lost many many photos and videos.
I never had this bug, I'm sorry to hear your experience...
But I never had a similar problem.
Regards
Yes I Also Have This Automatically Photos And Videos Deleting Problem. I Am Using B512ROM Gonna Install Your ROM Tonight.
Related
Based off of new Acer LiquidE bin 0.008.06 & "new" sys
v2.2s Stock No Theme
Optimized
Based on new system (yes, newer than 0.008 bin)
Newer rooted kernel from vache - thanks again
AOSP google apps
Global time
Nexus Live wallpaper fix - thanks Bais
v2.2t Themed *pulled due to..... not working properly
Optimized
Based on new system (yes, newer than 0.008 bin)
Newer rooted kernel from vache - thanks again
Themed
Battery Percent in icon
AOSP google apps
AOSP mms & music
Sense live wallpaper
Global time
Fixed tmobile USA apns
Custom ringtones and notifications sounds
ad-block
exchange calendar and address book sync
full market access
Nexus Live wallpaper fix - thanks Bais
more.....
v2.1.9 BETA (FINAL by eViL - as long as things work)
Same as 2.1 except with working google sync (I think :lol: ) - Ok, not funny, so please report issues.
Based on new system (yes, newer than 0.008 bin)
Newer rooted kernel from vache - thanks again
Thanks for testing & feedback bais & vache.
Known Issues:
After signing into Google, sign-in keeps popping up. *fix - either press home or reboot and it should go away
________________________________________________________________________________
_____________________________________________
2.1.6 with no google apps http://www.mediafire.com/?sharekey=3f0b4ef...80654b192e70f3f
Market fix & Google sync fix (possible) [flash these in recovery, no wipe] http://www.mediafire.com/?sharekey=3f0b4ef...47708e37b913e74
*You can still use the ROM perfectly fine w/o google apps. You will just need to find another way to get apps, like slideme or something.
________________________________________________________________________________
______________________________________________
v2.1 Total Beta
Based on new system provided by my NEW source
Contains most things except urfooz, spinlets, DTG and some others
Rooted
Busybox
Superuser
Not themed or optimized. (it's actually pretty plain.)
The bin that this system was from contained a new baseband, 3.11.xx
Known Issues:
Google sync not working
________________________________________________________________________________
____________________________________
Based off of new Acer LiquidE bin 0.008.06
v2.00r1
All new apps and framework optimized
Rooted - Thanks to vache!
Busybox
Superuser
Removed urfooz, spinlets, dlna, AcerAbout, AcerSettings, AcerSync, AcerUpdateNotifier, Docs to Go, Facebook, Maps, Twidroid
Replaced Deskclock with Droid Deskclock, Mms and Music with ASOP Apps
Added Dimmer, explorer, Quickboot, SetCPU, gscriptLite, Moto Cal & Gal
Black/Smoke glass theme - most widgets and launcher - from varies devs (thanks!)
Battery with percent - ported from Canadiancrow
More I don't remember right now.
Known Issues:
Deskclock has garbled text
Cannot disable haptic feedback
Black date text in statusbar - fixed here http://www.mediafire.com/?ywjmtw0mzmn
bin 0.008.06 is REQUIRED.
Instructions:
Download Acer Tool
Download and flash 0.008.06 bin via Acer tool
Fastboot Malez .43+ recovery
Boot to recovery, format cache, dalvik & factory reset
Flash eViL LE ROM
Download Repo:
http://www.4shared.com/dir/31525568/eb17c378/LiquidE.html
http://www.mediafire.com/?sharekey=3f0b4ef...6f8cf40558950b4
http://www.androidspin.com/downloads.php?dir=evil_d/ROM/
Download BIN
http://www.mediafire.com/?eityv5dynnn
Download v1.9 and below changelog
http://www.mediafire.com/file/ljfzzfnhimt/LE.txt
|D
reserved for future
woot! 2nd 2.1 custom rom!testing now.thnx!
how is the speed of this one!!!
Krumbalu said:
how is the speed of this one!!!
Click to expand...
Click to collapse
It's pretty good at times. RAM usage is very high with eclair. Hopefully it can get optimized better by the official release.
nice rom, I only have a problem with the htc keyboard does not work ....... how do I restore the default launcher?
lemagi said:
nice rom, I only have a problem with the htc keyboard does not work ....... how do I restore the default launcher?
Click to expand...
Click to collapse
What do you mean "it does not work?"
Here is the original launcher.
thanks for the launcher, I have resolved reinstalling keyboard
Can you implement mutitouch?
does live wallpapers work with this launcher?
[[ Cold ]] said:
does live wallpapers work with this launcher?
Click to expand...
Click to collapse
Yes it does!
lemagi said:
Can you implement mutitouch?
Click to expand...
Click to collapse
We'll see if disco can do it.
small update (1.3).
another update to 1.4.4
Thanks for your job and your great roms ! I download 1.4.4 but 4shared is so slow....
Baz1274 said:
Thanks for your job and your great roms ! I download 1.4.4 but 4shared is so slow....
Click to expand...
Click to collapse
Thanks!
Sorry about 4 shared.....
Is the RAM now better? But great rom.
v1.7 is now available.
An Excellent Eclair for Acer Liquid
I've been using v1.6.7 for the past several days and it has performed almost flawlessly. Initial problems accessing all apps in the Market were sorted out.
A few apps aren't happy
- Handcent SMS presents duplicate incoming messages and something FC's on pop-up if the screen is locked. It eventually becomes unstable. I uninstalled it. It's become too fat anyway.
- Drocap2 creates an empty file sometimes when taking screenshots. Seems to work best making pngs with shake trigger.
- Earthquake app crashes on startup 100% of the time.
But otherwise, this is the best Eclair I've run on the Acer Liquid and better than anything on the HTC G1 /Magic....simply because the video drivers are there for the Liquid...and that means *everything* works.
At the moment I'd pick eViLD v1.7 over LCR v1.1.1....for both stability and the fact the voice searching / input works.
Well done!
You will se that liquid is fast like cheetah when Acer will release stable ROM, and our devs make it 3 times faster
hi
there are a new rom release the bbs.anzhi.com
link : http://bbs.anzhi.com/thread-4845394-1-1.html
mirror rom link : http://www.multiupload.com/ANZD1KQGDO (thanks sr21)
anladığım kadarıyla b866 varmış ve 2.3.6 imiş. orjinal mi değilmi göremedim.
as I see that there is a B866 which is based on 2.3.6 gb. I didn't see a clue about is it official or not.
I was using translate, but i thought it was android 4.0. Couldnt dl because i cant register with translate.
EDIT: Seems i got it wrong. Its 2.3.6
Sent from my Desire HD using XDA App
Repeal said:
anladığım kadarıyla b866 varmış ve 2.3.6 imiş. orjinal mi değilmi göremedim.
as I see that there is a B866 which is based on 2.3.6 gb. I didn't see a clue about is it official or not.
Click to expand...
Click to collapse
Apparently B866 is Huawei Honor 2.3 rom which Huawei made avaliable on their site a couple days ago.
This chinese rom seems based on that B866 rom, too bad Google Translator is not good enough to understand the user feedback on the chinese forum, don't even know if it has other languages besides chinese. Waiting for feedback in english
Translated text by google translate:
Huawei's official website yesterday upgraded version 4.0 of the glory of the business, but also updated the 2.3 to B866, transplanted to our U8800 with, well, it seems that Huawei's share of a source is indeed true, so the glory of the U8800 runs on far from transplantation than, in my opinion can not be called transplant. Also tomorrow, LW official upgrade, this is said to solve many problems such as loss of the desktop plug-in, SMS and so on, if you have time, will the upgrade version.
Description:
Based entirely on the glory of U8860 official 2.3ROM (B866), the maximum retention of official character, built out of some streamlining software, such as Sina microblogging, and so get rid of the CUST's can not be modified, added root privileges, RE manager. G Major enhancements added to the script. Enabled by default 80M of compcache (ZRAM), the default unlock FPS
Non-core overclocking, the camera really support HDR, upgrade to 2.3.6 retains the glory of the characteristics of the ROM program, the current task previews and other personal test run, WIFI available, because the glory of the framework based entirely on function does not work so hot (that is, You can not simulate the 3G wireless wifi signal available to other mobile phone use, care about this feature using the previous version of the proposal)
In addition, as Huawei's open opportunity to mount the 2.3 cust partition, and the burden is also linked to the starter theme, so completely off slow start, 40 seconds down individuals.
Brush Description:
Brush must be the official 2.3 (B522)
1 to downloaded packages will not extract the zip brush machine, directly into the SDcard on
(2) has been holding down the power button to turn the volume up +, do not release until well into the recovery mode
3. Recovery, the volume up and down keys / menu, move up and down the Home button, power button / search button to confirm the return key to return to the previous menu level.
4 Select "Clear all data" restore what the factory
5 Select "choose from the SD card Brush Pack"
6 and then select "Choose the ZIP file from the SD card."
7 to find just download the zip package to confirm Brush
8 confirmed, Brush started, wait about 1 minute to complete.
9 after brushing, return to the first menu, select "reboot system now" to restart the phone
10 and then patiently wait for a while, the first launch will be relatively slow.
Click to expand...
Click to collapse
---------- Post added at 12:42 AM ---------- Previous post was at 12:33 AM ----------
The Hidden content
ROM Download
Honor_for_u8800-B866.zip
Forgot to change the model into glory, and will need to download the following file to replace, or Rom pea pods, note that the permission
build.prop (15.18 KB, Downloads: 345)
Click to expand...
Click to collapse
Link to the ROM: http://115.com/file/c2zjvm02
build.prop attached
Downloading with JDownloader at the moment
Repeal said:
anladığım kadarıyla b866 varmış ve 2.3.6 imiş. orjinal mi değilmi göremedim.
as I see that there is a B866 which is based on 2.3.6 gb. I didn't see a clue about is it official or not.
Click to expand...
Click to collapse
It's not an official one, Huawei never post news on third party forums.
brief translation of the Description section:
━━━━━━━━━━
it's based on offcial 2.3 ROM(B866) for Huawei Honor U8860, it keep the offcial characters as far as possible. stripped out some bundled applications like Sina blogging (a twitter liked application)
fixed the readonly CUST issue; added root priviledge; added RE manager(root explorer?).
added Senior G (genokolar)'s enhanced script
default: enabled 80M compcache(ZRAM); FPS is unlocked
use non-overclocking kernel; camera will really support HDR; system upgrade to 2.3.6; keeps featured appliclations in Honor ROM; task preview; etc...
Known issues:
according my personal test, WIFI is working, but WIFI AP is not working because it totally based on Honor framework.
because it will mount /CUST partition in this ROM and the launcher bundled a theme(?), so the power off/on speed is slow, my test result is about 40 seconds.
━━━━━━━━━━
Mirror:
http://www.multiupload.com/ANZD1KQGDO
sr21 said:
Mirror:
http://www.multiupload.com/ANZD1KQGDO
Click to expand...
Click to collapse
do you try this rom ?
madmax59 said:
do you try this rom ?
Click to expand...
Click to collapse
I'm doing that at the moment.
I've just downloaded the rom last night and I leaved it uploading during the night.
In the afternoon I'l give some feedback about it.
sr21 said:
I'm doing that at the moment.
I've just downloaded the rom last night and I leaved it uploading during the night.
In the afternoon I'l give some feedback about it.
Click to expand...
Click to collapse
ok. we will be wait your feedback
thanks
So, we have:
- Not working Wifi AP (If I try to enable it, I get Error message and if I try to enable Wifi after the phone reboots)
- No GAPPS
---> I've installed Cyanogem GAPPS and it works without problems (so far)
- The sound recorder have a lot of background noise, but I think that also happens in the 2.3.5
- Working all sensors
- Working Wifi, GPS, Bluetooth, 3G (I don't have data plan so I didn't test it correctly)
- The sound while calling it's a little better than the official 2.3.5 (28/12/11)
- USB connection to the PC is also working
- Sound works like 2.3.5
- It cames with TitaniumBackup 4.0, Root Explorer (I think). Both apps are in chinese!
- It have a pretty cool task manager
- The launcher is the same of 2.3.5
For what I've tested it could be a good rom to have, but there are no big differences to the 2.3.5.
You could see some screenshots of the rom attached
So is needed to install first the 2.3 of huwei and only after this one or I can go directly from my miui with the old kernel?
Sent from my Huawei Ideos X5 using XDA App
vlc_marcos said:
So is needed to install first the 2.3 of huwei and only after this one or I can go directly from my miui with the old kernel?
Sent from my Huawei Ideos X5 using XDA App
Click to expand...
Click to collapse
You need to have the 2.3.5 installed before.
sr21 said:
So, we have:
- Not working Wifi AP (If I try to enable it, I get Error message and if I try to enable Wifi after the phone reboots)
- No GAPPS
---> I've installed Cyanogem GAPPS and it works without problems (so far)
- The sound recorder have a lot of background noise, but I think that also happens in the 2.3.5
- Working all sensors
- Working Wifi, GPS, Bluetooth, 3G (I don't have data plan so I didn't test it correctly)
- The sound while calling it's a little better than the official 2.3.5 (28/12/11)
- USB connection to the PC is also working
- Sound works like 2.3.5
- It cames with TitaniumBackup 4.0, Root Explorer (I think). Both apps are in chinese!
- It have a pretty cool task manager
- The launcher is the same of 2.3.5
For what I've tested it could be a good rom to have, but there are no big differences to the 2.3.5.
You could see some screenshots of the rom attached
Click to expand...
Click to collapse
thank you very much for this information
I didn't remenbered to test the "missing calls" issue that we have on the 2.3.5.
Someone that have the problem on the 2.3.5 please test this situation with this ROM.
So is possible almost shire that if I have problems with the 2.3.5 version of Huawei I will have the same on this rom, iam speaking about the sensitivity screen and the glichts etc
Thanks for the help
Sent from my Huawei Ideos X5 using XDA App
vlc_marcos said:
So is possible almost shire that if I have problems with the 2.3.5 version of Huawei I will have the same on this rom, iam speaking about the sensitivity screen and the glichts etc
Thanks for the help
Sent from my Huawei Ideos X5 using XDA App
Click to expand...
Click to collapse
I don't have those probems in this ROM neither in te 2.3.5.
This is one port of the Huawei Honor (u8860) (Portuguese article)
Try the ROM and tell us your feedback.
Maybe the drivers included in this ROM solve some issues.
I'll install it once again to see if the missing calls issue is present.
ROM Info:
This port is based in the B866 Stock ROM of Hauwei Honor (u8860)
- It was realesed by Hauwei on the December 30th of 2011.
- The language should be English but as the port was made for a Chinese developer it have the Chinese language as the first one, but all the other languages are present.
HUAWEI_U8860_Android_2.3_V100R001C00B866SP01_Normal._05010PUU
Click to expand...
Click to collapse
DO NOT ISNSTALL THE ROM OF THE LINK ABOVE, IT'S ONLY FOR INFO!!! THAT ROM IS TO U8860 NOT TO U8800.
About the port:
- The ROM is based entirelly in the B866 ROM of the u8860.
- Some stuff (garbage apps) of the original ROM were removed.
- Root added.
- The FPS are unlocked.
- Non overclocking kernel.
- The camera supports HDR
- Pretty cool task manager, with previews of the running programs.
Not Working:
- The only problem is the Wifi AP, but I don't use it, so it isn't a problem for me at all.
You can install it using CWM (I'm using the v.5.0.2.7).
- Just clear cache, factory reset.
- Go to advanced, clear Dalvik cache.
- Reboot recovery (sometimes the SD card doen´t mount properly and doing the reboot recovery the issue is solved)
- Install zip from SD Card.
- Install the GAPS if you want them and reboot.
Download links:
bbs.anzhi link
Mirror done by me
build.prop with the correct device name (the original shows u8860)
Cyanogem GAPPS
----
More feedback about it:
- Since yesterday I didn't have any reboot or FC.
- I've ran Antutu Benchmark and I got better results than the 2.3.5 stock rom. My results with 2.3.5 with the stock kernel are more or less 2400 and with this one I got 2643.
- I can play 3D games like Ninja Fruit, GT Racing better than with the 2.3.5.
- No missing calls issue of the 2.3.5
Nice and smooth! Cool!
sr21 said:
Not tested yet:
- Missing calls issue of the 2.3.5
Click to expand...
Click to collapse
I was calling all day for my u8800 and I didn't have any call forwarded to the voicemail.
Can someone try the ROM and give us feedback about it?
MosTERRA said:
I will buy Motorola Atrix. Then the Elite SX and Elite ROM another will not be updated.
Thanks for interest.
Click to expand...
Click to collapse
[U8800] Elite ROM X1 .32+.35 kernel Multilanguage by TerraMino 2012-03-19
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
MosTERRA said:
Elixe X1 .32 kernel FIXED / 2012-03-19
http://www.mediafire.com/?ria7b9hvpsynb7z
Elixe X1 .35 kernel FIXED / 2012-03-19
http://www.mediafire.com/?csaqe2nqwa8g5gk
Changelog:
- Bootloop fixed
- Slow boot fixed
- Cosmetic details
- Improved audio
Click to expand...
Click to collapse
MAIN FEATURES
Based MIUI
Default kernel is Stockwell
Fast boot
USB tether
Wi-fi tether is not working (you can use Barnacle in the Market)
More responsiveness and fast user interface
Advanced sound quality. Incredible in-call sound and perfect music quality (near audiophile quality)
Better GPS (for Turkey)
Embedded Sony Ericsson Bravia Engine
High precision monitoring of GSM signal and WiFi signal
Better Internet speed and security
Prevented ad-servers (internet)
Better power management and low battery consumption
Fully optimized system with tweaks
Better 3D performance
ZipAlign
Very quick focus and photo shot (autofocus must be enabled)
Elite ROM theme
NEW FEATURES FOR V9.7
Integrated Galnet framework for better interface and battery performance
Integrated Privacy Security Management feature to core-framework (managing with PDroid application)
Improved global settings for GPS
Compass sensor corrected
Improved camera driver for better macro photo shot
Improved 3D drivers for better 2D and 3D experience
Download Elite ROM v9.7g -- Galnet Framework (Languages: Only TR-EN-CH)
http://www.mediafire.com/?fsayurfa07tu86u
(Fixed bootloop and kernel issues)
Download Elite ROM v9.7m -- MIUI.us Framework MULTILANGUAGE (Languages: ES-RU-GR-PL-SW-DE-HU-KO-VI-CZ-SK-SL-TR-HE-AR-PE-UK)
http://www.mediafire.com/?0noh564lmu66bb3
(Fixed bootloop and kernel issues)
Download PDroid Security
http://www.mediafire.com/?72irqahu2j57ip3
Pdroid.apk (132 Kb)
After ROM installation, first step install to Pdroid.apk (if you want Privacy Security Management feature)
If you dont use PDroid, first flash that .zip file
PDOID-IPTAL (uninstall) addon for Galnet Framework:
http://www.mediafire.com/?wd9erk4mr9dqfml (16 mb)
PDOID-IPTAL (uninstall) addon for Multilanguage Framework:
http://www.mediafire.com/?gugh2bfe7d5uku7 (17 mb)
Requirements:
.32 kernel B138 or B163 stock ROM must be installed.
CWM 5.0.2.3
dream4 said:
the point is to downgrade from 2.3 to 2.2.
Maybe this might help clearly.Just Terramino(rom complier)claims that 2.3 is like a poison ivy covers your device very tight;so repeat the loading 2.2 action 3 times for better clean.
Downgrade from 2.3.5 back to 2.2.2
1) Download U8800 V100R001C00B138SP04 (Overseas General) Android 2.2.2
2) Extract the "dload" folder and copy it (along with its contents) to the ROOT of the SD Card.
3) Turn on your U8800 while holding [VOL-] and [VOL+] and the Android 2.2.2 install should start.
4) Once finished you should be back to 2.2.2.
5) If you phone does not boot correctly power on phone while holding [VOL+] to boot into recovery and Reset to factory defaults.
6) Delete the "dload" folder from the SD Card.
Click to expand...
Click to collapse
important!
Even if you don't wipe data/factory reset,the rom will automatically delete all user data by itself,so backup all your applications,sms,call logs...etc. if necessary
INSTALLING:
- Wipe data/factory reset
- Wipe Cache partition
- Advanced -> Wipe Dalvik Cache
- Mounts and Storage -> "mount /system"
- Mounts and Storage -> "format /system"
Finally install zip from sdcard -> select ROM file
After installed, go to Spare Parts and run it. Then choose Window animations and Transition animations options to Fast. In this way, the desktop will have increased fluency.
--------------------------------------------- old version-------------------------------------
Elite ROM v9.6 download link:
http://www.mediafire.com/?ezmp7d7vdz301dp (Elite.ROM.v9.6.by.TerraMino_2012-02-01.zip)
(PS: This ROM from a Turkish site Donanim Haber (the largest forum in Turkey). Terramino the ROM developer, ROM publishing for a long time in this forum. At the same time, many users use this ROM. Is not new.
I am not the ROM developer to provide answers to your questions in time. I hope you will understand.)
More fast boot patch (for v9.6!)
MosTERRA said:
Problem solved.
Currently booting 30 - 38 seconds.
Does this be enough?
I prepared a small patch file. May friends who want to install from the link below.
http://www.mediafire.com/?c9472wjul05vmb9 (Install on CWM)
Dalvik Cache cleaned and re-adjusted during installation. For this reason, the phone still will be slow during the initial boot. Shut down and restart the phone after first opening. Now you see the opening of the phone quickly, around 30-38 seconds.
Click to expand...
Click to collapse
Alternative kernels for Elite ROM v9.6
dream4 said:
http://www.mediafire.com/?0jibeitpy4f4ivl
Elite rom's alternative kernels:You may want to try for different purposes.
Franco Kernel: Last franco,(most know its fame)If you want high performance use with 3d drivers.
Suggested cpu:600-1024 smartassv2.(Tether doesn't work with Franco)
Stockwell Kernel(Elite comes with this): If you prefer tethering,then use this kernel.(native usb tethering works,wifi tethering may need an app like Barnacle).If you prefer 3d drivers,then use 368-1024 smartassv2.If you want longer battery choose 368-600 smartassv2.(It'll be still fast).During video recording,use 544-1024 conservative,after shoot return 368-1024 smartassv2.
Stockwell Kernel 2: A modified version of Stockwell kernel.Battery performance is better.Tether may not work,so test on your own phone if you need tethering.Suggested speed 368-1024 conservative.If you want more battery life,prefer 368-600 conservative(It'll be still fast).During video recording prefer 544-1024 conservative,after that you can return 368-1024 conservative.
Ps:Guys,in our forum all users are really happy with this Elite both with three kernels.Everybody is reporting really high battery performance.Don't hesitate to try which will be more suitable for you.
Click to expand...
Click to collapse
Elite ROM v9.6, factory software on the phone that allows you to take better pictures with Bravia Engine comes from property.
Here are sample photos taken with this feature.
http://i.imgur.com/VXaq5.jpg
http://i.imgur.com/uRhFv.jpg
http://i.imgur.com/xj1Oh.jpg
http://i.imgur.com/ePFcZ.jpg
http://i.imgur.com/bUDHE.jpg
(Photos by AhmtOzdmr)
Well this came as a surprise
Too bad it's just for .32 . Do you know if a .35 version is coming?
ooie said:
Well this came as a surprise
Too bad it's just for .32 . Do you know if a .35 version is coming?
Click to expand...
Click to collapse
TerraMino waiting for franco's new .35 based kernel. We have new .35 ROM when he published new kernel (TerraMino says )
Thanks dude, trying.
thank you for man..
benchmark result with antutu
1 Ghz
by CAYAR
Looks nice. I will give it a try after franco gets his .35 kernel done and released.
EDIT: Antutu score seems to be about the same as with any other rom.
Btw, is this gingerbread based rom with ics icons?
So far so good! It is certain that I am stick to this rom. Thanks for sharing this lovely rom.
Looks VERY nice
Any known bugs?
For people running Official 2.3 I take it we will need to downgrade to Official B138 before installing?
Thanks in Advance!
That-Guy said:
Looks VERY nice
Any known bugs?
For people running Official 2.3 I take it we will need to downgrade to Official B138 before installing?
Thanks in Advance!
Click to expand...
Click to collapse
there is no bugs and yes need to downgrade to offical B163
---------- Post added at 09:46 PM ---------- Previous post was at 09:42 PM ----------
ooie said:
Well this came as a surprise
Too bad it's just for .32 . Do you know if a .35 version is coming?
Click to expand...
Click to collapse
already available .35 version but it's not final version
terramino's working on
if you want to try http://www.mediafire.com/?53jy2z52ybgdrdy (not ML)
darthist said:
there is no bugs and yes need to downgrade to offical B163
---------- Post added at 09:46 PM ---------- Previous post was at 09:42 PM ----------
already available .35 version but it's not final version
terramino's working on
if you want to try http://www.mediafire.com/?53jy2z52ybgdrdy (not ML)
Click to expand...
Click to collapse
.32 and .35 is just the Kernel version right?
Will there be much difference between the two?
That-Guy said:
.32 and .35 is just the Kernel version right?
Will there be much difference between the two?
Click to expand...
Click to collapse
it's name is MIUI based Performans Rom X English - .35 Kernel and installing on stock ROM 2.3.5
important specs:
Extreme touch sensitivity is reduced due to factory 2.3.5 software.
.35 Kernel which is the biggest problem was corrected incoming and outgoing speech sounds.
Only when listening to music, the highest volume level is below normal. This problem will be corrected in future versions.
but elite ROM 9.6 newest because TerraMino waiting franco's .35 kernel and he will going to develope Performans Rom X new kernel realesed
(sorry my english )
Gonna give it a try. I'll report back later today or tomorrow.
edit: the .35 version that is.
ooie said:
Gonna give it a try. I'll report back later today or tomorrow.
Click to expand...
Click to collapse
TerraMino says:
If you want to use the Elite ROM v9.6, B163 factory software must be installed on your phone. If you have installed the factory software 2.3.5 before, you should definitely doing the following steps for B163.
Be sure to backup your IMEI. Use an external SD card during all transactions below. B163 dload folder on an external SD card.
B163 Install the first time. Installation ends and the phone is opened by turning off and on again for the second time so as to B163-ROM install.
After installing the second time, wait for the phone opening. Remove the SD card and the screen went pink then off to install the CWM 5.0.2.3
Open phone by CWM and do all the wipe process.
Then re-insert the SD card and install the B163 for the third time.
The phone opens to shotdown and re-install in the pink screen the CWM 5.0.2.3
These steps are the traces left by the stock 2.3.5's completely clean.
If you do not install 3 times B163, you may experience various problems.
TerraMino says's end
Installed this ROM and for now everything is fine!
No problems with Wi-Fi for now, going to restore my APPs with Titanium Backup and see if everything is fine. Thanks!
trocLas said:
Installed this ROM and for now everything is fine!
No problems with Wi-Fi for now, going to restore my APPs with Titanium Backup and see if everything is fine. Thanks!
Click to expand...
Click to collapse
I was glad for you
Quick thoughts and facts about the .35 kernel version (see post #11)
- Custom theme as stock, blends a little blue and ICS-esque stuff into the default theme, and I love it, looks really fresh
- ICS icons too, not a big fan of them, luckily there's always the Vexillum Project icons to use. The font is awesome.
- It's based on MIUI 2.1.13 and it uses ret4rt's 2.6.35.7 kernel dated January 13th
- English is default language, Traditional and Simplified Chinese are the other choices
- Speaker still has the buggy and crackling sound while playing music
- Can't say if it's faster than ret4rt's MIUI, needs a few days of testing at least
Will edit this post later on as I see fit
I think performance X is of interest for more
ooie said:
Quick thoughts and facts about the .35 kernel version
- Custom theme as stock, blends a little blue and ICS-esque stuff into the default theme, and I love it, looks really fresh
- ICS icons too, not a big fan of them, luckily there's always the Vexillum Project icons to use
- It's based on MIUI 2.1.13 and it uses ret4rt's 2.6.35.7 kernel dated to January 13th
- English is default language, and Tradiotional and Simplified Chinese are the other options
Will edit this post later on as I see fit
Click to expand...
Click to collapse
Regarding the Incall volume and the speaker background noise (like extreme bass) are fixed?
Hello there guys!
Today I'm presenting you with a modified B927 ICS ROM.
Let's see what changed:
Changelog V2:
1) Zeam Launcher replaced with Trebuchet Launcher(Official CM9 Launcher).
2) Added DSP Manager from CM9 and Google Music (huawei music player had issues on my phone)
3) Slightly modified media_profiles.xml for better video quality
4) Re-enabled fast-boot option & restart prompt at power menu
5) Changed minimum CPU frequency from 368 MHz to 245 MHz in order to save some battery.
V2 Installation:
1) Flash V1 by following instructions below in this post
2) Download Update_To_V2.zip and flash it via recovery
3) Enjoy The Changes!!!
Download Link V2 Update Zip:
http://www.mediafire.com/?uupg9v5wbv22tzu
Changelog V1:
1) Deleted lots of apps and stuff. Final rom size is 141 MB. You can flash this without repartitioning the system
2) System Language is English and doesn't change anymore automatically to mobile network's language (seriously this drives me nuts ). You can change system language from the settings menu as usual.
3) Default CPU Governor changed to userspace. System seems more responsive this way. You can always change it with an app like no frills cpu control.
4) Added Volume Rocker Wake & Search Button turns the screen on/off.
5) Added Init.d support
6) Unlocked FPS and Network Tweaks. Both are in the script called tweaks in Init.d folder.
7) Updated hosts file. No more ads in free apps.
8) Changed Default Launcher to Zeam Launcher. I know most people would want an ICS one like APEX or NOVA launcher but I didn't have much time to play around and see who is better. If Zeam doesn't suit your needs then install any launcher you want from Play Store.
9) Removed Fast-Boot Option and Restart option from power menu(will re-add them in the future)
Installation Notes:
Do the following:
1) Copy the rom .zip file to your sd
2) Go into recovery
3) Wipe data/factory reset
4) Advanced->Wipe Dalvik Cache
5) Install .zip from sd card
Extra Notes: & Issues
Screenshots available in attachments.
Screen has visual artifacts in quadrant benchmark. This is due to fps unlock script. Other than that everything seems to work fine.
Download: V1 (see up for newer version)
http://www.mediafire.com/?v0hlp6qm04iyyj3
Thanks To:
Giris for porting newest ics baseband to gb baseband
Broxnitas because this release is based on his U8800proB927CWMStockV2SemiLite2.3Partition.zip available here: http://forum.xda-developers.com/showthread.php?t=1793014
eng.stk for his CM9 DSP Manager port available here: http://forum.xda-developers.com/showthread.php?t=1636056
matt5eo for his trebuchet launcher mirror available here: http://forum.xda-developers.com/showthread.php?t=1592082
Happy Flashing
Please Read!
I will be missing the whole weekend and won't have access to xda.
Port here your feedback and I will read it all when I'm back!
This is just a quick rom mod because I didn't have enough time today to cook it as I would like. I'm gonna make some more changes when I return.
what about incall volume?
efray said:
what about incall volume?
Click to expand...
Click to collapse
as long as this one is based on broxnitas, any issues that rom has will also exist in this rom. I don't have any problem actually with incall volume,but I will test it more deeply after the weekend.
the incall volume is normal, but bronxitas is trying to increase it to the maximum level
free ram
hi, how many of free RAM do you have with this build?
thank you
Not Wifi again on U8800-51
I really do not understand and now I'm giving up. If I use the ROM Aurora_4.1_4.0.4 (http://forum.xda-developers.com/showthread.php?t=1532662), I have Wifi and not FM Radio. If I use your ROM, the Wi-Fi don't work ("Turning Wifi-On" and nothing) and the FM Radio works.
Any idea why this happens?. I tried to combine all files and folders that have a Wi-Fi relation, from Aurora to your ROM, but nothing.
Finally, I had to return to Aurora_4.1_4.0.4, I'd rather sacrifice the FM Radio to have Wi-Fi again.
Sorry, but I did not understand?
How do I install this ROM?
2.3.5 Recovery from or how?
Read this: http://forum.xda-developers.com/showthread.php?t=1343276. Volumen + - and Power, Pink Screen, then backup your 'Recovery.img' and replace with the new 'Recover.img' (CWM 5.0.2.7).
Good luck
I know how to put on RECOVERY 2.3.5
I wondered from 2.3.5 to install this ROM?!?!? Or?
dingila said:
I know how to put on RECOVERY 2.3.5
I wondered from 2.3.5 to install this ROM?!?!? Or?
Click to expand...
Click to collapse
Yes, flash it like a normal ROM with CWM
WIFI or burst
sewa2k said:
Yes, flash it like a normal ROM with CWM
Click to expand...
Click to collapse
Hello again sewa2k, wanted to know if it works the Wifi on your phone. I have tried every official ROM B927 and the Wifi don't works, but the FM Radio is ok. Only ROM MIUI o Aurora works perfect with the Wifi, but NOT the radio. If you have any information, I appreciate it.
Thanks.
iceman2029 said:
Hello again sewa2k, wanted to know if it works the Wifi on your phone. I have tried every official ROM B927 and the Wifi don't works, but the FM Radio is ok. Only ROM MIUI o Aurora works perfect with the Wifi, but NOT the radio. If you have any information, I appreciate it.
Thanks.
Click to expand...
Click to collapse
WiFi is not working here with this ROMS (or any based on 927)
sewa2k said:
WiFi is not working here with this ROMS (or any based on 927)
Click to expand...
Click to collapse
Mine is working just fine with U8800proB927CWMStockV2.zip
First fully working ROM for me!
Originally Posted by sewa2k View Post
WiFi is not working here with this ROMS (or any based on 927)
Mine is working just fine with U8800proB927CWMStockV2.zip
First fully working ROM for me!
Can you tell all the steps that you have done??
dingila said:
Originally Posted by sewa2k View Post
WiFi is not working here with this ROMS (or any based on 927)
Mine is working just fine with U8800proB927CWMStockV2.zip
First fully working ROM for me!
Can you tell all the steps that you have done??
Click to expand...
Click to collapse
How To Install:
You must be on 2.3 based ROM then:
1: You need to flash Step1 from official B926 for bigger system partition capacity
2. Download ZIP
3. Put it to external SD card and do it as allways, advanced>reboot recovery>wipe data/cache/dalvik cache>Instal ZIP from SD card>Choose U8800proB927CWMStockV1_1.zip
I was on ics so i had to flash the 2.3.5 first.then the repartition.zip,had to copy the cwm recovery again,and then U8800proB927CWMStockV2.zip
mm231982 said:
Mine is working just fine with U8800proB927CWMStockV2.zip
First fully working ROM for me!
Click to expand...
Click to collapse
I was answering to @iceman, we have U8800-51 version so in this phone wifi isnt working, lol my mistake sorry.
after flashing U8800proB927CWMStockV2.zip wifi was not working for me so i flashed WiFi TX Power enabler and wifi was ok. please test if this helps and report back.
wifi no working
sewa2k said:
I was answering to @iceman, we have U8800-51 version so in this phone wifi isnt working, lol my mistake sorry.
Click to expand...
Click to collapse
EdisDee said:
after flashing U8800proB927CWMStockV2.zip wifi was not working for me so i flashed WiFi TX Power enabler and wifi was ok. please test if this helps and report back.
Click to expand...
Click to collapse
After installing the patch than anything else did, I followed the instructions step by step and the wifi still does not work.
thanks
We have the Huawei U8800-51, in Venezuela on several occasions the rom for the 8800 Pro also works for the U8800-51, but this time it is not, does not work on wifi, if you could help us we will work on wifi, eg in that of kalo (B876_KALO) we both work (data and wifi), if someone could make a patch that we solve the problem with the wifi or maybe have an idea to make the wifi work in the U8800-51? with this rom, it would be a great help for us in Venezuela
and thank you very much for such a great job
This is going to be a GREAT ROM if you put more time in it.
I haven't found any bug, but I'd like to do some recommendations.
First of all, I'd be great if SU was removed, and root access was given automately.
Secondly, I suggest the FPS is unlocked to 55 (sorry if it already is, it feels like it's at 45-50 sometimes).
Lastly, I noticed this ROM is not overclockable. Could you make it?
Thanks. I hope I see those improvements in the next update.
AETHER OS V4.3 (OFFLINE)
Why offline? i don't have J2P anymore since November of 2019, so basically i updated this rom to v4.3 without j2p.
INACTIVE--INACTIVE--INACTIVE
Any issues according to the rom can't be answered by me anymore, thank you for understanding guys. love ya'll.
Update (as of 5/11/2020):
Officially Discontinued, reason? explanation above.
All of you guys who want/can modify this rom to make it latest, just go ahead, i won't gonna make any move about it since my work "personally" is done. just give credits and don't remove and important details to the rom as it is the OG Aether OS you can ever seen Thanks for the past months supporting me guys. love you all!
HTML:
Your warranty is now void. *
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about flashing this zip file
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you. HARD!
* *
Hello, this is Mar Yvan. a 15 y/o kid who just started to make some roms for this community
This was already posted/released thru telegram and facebook private groups. but due to some personal issues, this was the only free time i had to post this one here.
This rom was based on Enigma and GensysUX (Versions v1, v2 to v3.2) then now rebased to full Enigma v2.1 Port by ShaDisNX255 (starting from v4 and future updates)
Some notes here
1. Please if you see some bugs, make sure to reply/do a feedback around this post so i can make a fix for it, or i will fix it in the next version in the future.
2. Bugs report should come with device variation (e.g: g532g, g532f), because i'm using a G532G so there will be some kind-of-bugs in other version.
3. Stop kanging hardwork, if you want to repost it. make sure you have permission from me.
Screenshots : - Sorry for not just attatching it in this thread, i can't attach/upload photos due to my account status.
< Tap me for Screenshots >
ROM INFO
- Base on Note 7 firmware:
* PDA: N930FXXU2BPI7
* CSC : N930FBTU2BPI5
- Deodexed
- Zipaligned
- BusyBox Support
- Knox Completely Removed
- Debloated
- Added CSC Tweaks
- OneUI Partial Mod for UI
- Re-do of Aether v3.2
- Rebased on Enigma v2.1
- Tweaks and other stuffs. it should be good at gaming atleast after this UPDATE.
FEATURES
Full N7 apps
Fully working GraceUX photo studio
disabled signature checks
fix do not disturb fc
S7e nougat animations
Fully themed like S8 & S7e nougat
S7e nougat Gallery
S7e nougat Galaxy apps & Widget
S7e nougat Launcher
S7e nougat WallpaperChooser
S7e nougat Calculator
S7e nougat Wallpapers
S7e nougat keyboard
S8 Music App
S8 Videos list App
All S8 Icons
A5 2017 camera app themed like nougat
N7 message app themed like nougat
N7 Phone & contacts themed like nougat
N7 SystemUI themed like nougat
N7 Setting app themed like nougat
N7 Myfile themed like nougat
N7 smart manager themed like nougat
N7 video app themed like nougat
mirror link
Other N7 apps
Nougat Sounds
Screen record
Samsung native multiwindow
Smart stay
Floating Messages
Scroll capture
Changelog (as of V4.2 update) :
Hades Kernel (for stability, power saving, performance and others - perfect kernel for all roms)
Debloated - 125 System Apps remain, dependencies and other apps are still present in the rom
Revised Assayyed Build.prop tweaks
OneUI Mod - reverted to the original oneui mod, because it's much cleaner and much better version than other OneUI's in J2 Prime community
OneUI Icon Pack
Some Symlinks Fixed
ROM Src Performance Changes
Good/Best for Users who want more on balance use (good battery with good performance)
Many more are changed in the current update, i'll update when i remember
Changelogs Prior to v4.3 Update :
-Overall system lagging fixed
-Orion Optimizer (created by me) v2 built-in
-Adblock
-2.7GB Free Storage
-Revised codings and some notable system improvements
Update when i'll remember
Notes to V4.3 :
-Still a TWRP Backup, to preserve the fast boot rate and the 100% booting on other variants
-G̶5̶3̶2̶M̶T̶ ̶m̶a̶y̶ ̶e̶n̶c̶o̶u̶n̶t̶e̶r̶ ̶b̶o̶o̶t̶l̶o̶o̶p̶ ̶o̶n̶ ̶t̶h̶i̶s̶ ̶r̶o̶m̶,̶ ̶s̶o̶ ̶p̶l̶e̶a̶s̶e̶ ̶i̶f̶ ̶y̶o̶u̶ ̶t̶e̶s̶t̶e̶d̶ ̶s̶e̶n̶d̶ ̶m̶e̶ ̶a̶ ̶f̶e̶e̶d̶b̶a̶c̶k̶. Reported fully working on this variant, just do the proper way of installing!
-Size : 1.16GB (Extracted) / 1.13GB (Compressed)
-Already rooted but the magisk manager are missing, to fix this you may need to flash Magisk again or install Magisk Manager Apk (get it from magisk xda thread )
Bugs :
I haven't encountered them in my device (which is G532G)
U report them to me by replying/feedback
Download :
Google Drive V4.3 - Litebeam Revision (Updated)
Previous Versions :
Google Drive V3.2 Foxtrot.
Instructions - V3.2: Make sure to follow this, or else. bootloop
Download the Rom Itself
Copy it to your SD CARD/OTG
Boot to TWRP
Go to WIPE
Format Data > Yes
WIPE > Advanced Wipe
Wipe Data, Cache, Dalvik, System
Reboot to TWRP (again)
Flash the Rom
Reboot to System
Wait for 15-20 approx mins.
Instructions v4 above :
Download the 7Z in the google drive
Extract it and move/copy it to your SD Card
Boot to TWRP
In Wipe Options > Format Data > YES (if you can't follow these steps, look at this picture as reference : https://imgur.com/gallery/2RE0Nje)
Restore the Package
Boot to System
If you can't see the rom in restore (TWRP), do this steps
Go to TWRP
Go to Backup > then backup your boot (boot only)
Replace the TWRP folder with the TWRP folder of the rom
now you can see the rom in restore, do the steps above to complete the entire process
Credits/Special Thanks!
Allooosh98
parth111999f
ashyx
Misma13 (Red Dragon)
By Zonik
Albe96
malbert16442
Sachin Kumar53
BlackMesa123
fastmelogin
ShaDisNX255
M. Nur Karim
Lauro
Blaize Baltazar de Britannia
Nam Con
Ibaz
Ali Maksum
Ilham Muttaqwa
And others who helped me to make this project.
Join our Facebook Group : https://www.facebook.com/groups/J2PrimeDevelopment/
Join our Telegram Channel : https://t.me/joinchat/NIwEcRVy9T76L...KdEP3i0Et8TwKcO4bAKYbMtqzYb8b4-yhqh41-Kez3SI0
Those who are not mentioned to the "Credit List" please PM/Inbox me on Facebook (facebook.com/escanorlulzsec) to clarify the issue and add your name
Reserved
So far so good. I can tell that whatever optimization you used on this rom is by far smoother than any other roms. Also it's kinda weird for me how some of the UI and apps look kinda small (?) But not that it is annoying, it's just unpleasant to see some buggy UI. All in all the rom is really smooth and it's fine looking than any other else. Keep up the good work!
Shiroyuki82 said:
AETHER OS V2
HTML:
Your warranty is now void. *
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about flashing this zip file
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you. HARD!
* *
Hello, this is Mar Yvan. a 15 y/o kid who just started to make some roms for this community
This was already posted/released thru telegram and facebook private groups. but due to some personal issues, this was the only free time i had to post this one here.
This is a rom based on Enigma v2.1 (by shadisnx255) and GenesysUX (by fast melogin), i combined the app-base of the genesys and it's framework (because the looks are good, and it would definitely fit the OneUI vibes) to Enigma v2.1 (which is a really great rom!:fingers-crossed
Some notes here
1. Please if you see some bugs, make sure to reply/do a feedback around this post so i can make a fix for it, or i will fix it in the next version in the future.
2. Bugs report should come with device variation (e.g: g532g, g532f), because i'm using a G532G so there will be some kind-of-bugs in other version.
3. Stop kanging hardwork, if you want to repost it. make sure you have permission from me.
Screenshots : - Sorry for not just attatching it in this thread, i can't attach/upload photos due to my account status.
https://ibb.co/album/kDTbtv
Rom Info :
- Base on Note 7 firmware:
- Deodexed
- Zipaligned
- BusyBox Support
- Knox Completely Removed
- Debloated
- Added CSC Tweaks
Features :
2.8GB Free Storage (approx.)
OneUI Partial Mod
Edge Screen
Mirror Link
Radio - Working
Samsung Native Multiwindow
Floating Messages
Scroll Capture
Game tools
Phoenix Kernel V3 as Default Kernel
10 Multitouch
Some Governors Added
More TCP Selection
added some I/O Tweaks
Bloated Build.prop for Smoothness, and other related tweaks.
And the rest are from Enigma and GenesysUX
Bugs :
I haven't them in my device (which is G532G)
U report them to me by replying/feedback
Download :
Google Drive
Instructions : Make sure to follow this, or else. bootloop
Download the Rom Itself
Copy it to your SD CARD/OTG
Boot to TWRP
Go to WIPE
Format Data > Yes
WIPE > Advanced Wipe
Wipe Data, Cache, Dalvik, System
Reboot to TWRP (again)
Flash the Rom
Reboot to System
Wait for 15-20 approx mins.
Credits/Special Thanks!
@Allooosh98
@parth111999 F
@ashyx
@Misma13 (Red Dragon)
@By Zonik
@Albe96
@malbert16442
@Sachin Kumar53
@BlackMesa123
@FastMelogin
@ShaDisNX255
@M. Nur Karim
@Lauro
@Blaize Baltazar de Britannia
And others who helped me to make this project.
Click to expand...
Click to collapse
its surprisingly smooth lol. And this is the one non-AOSP ROM I can fit in my petty 2GB SD Card
Can I have the source code for Phoenix Kernel? (Please , PM will work if you dont like publishing it)
meends said:
So far so good. I can tell that whatever optimization you used on this rom is by far smoother than any other roms. Also it's kinda weird for me how some of the UI and apps look kinda small (?) But not that it is annoying, it's just unpleasant to see some buggy UI. All in all the rom is really smooth and it's fine looking than any other else. Keep up the good work!
Click to expand...
Click to collapse
it's set to 220 dpi, due to it's custom systemui. because if i set it back to normal (which is 240) some icons will be larger and it looks like the mod is not yet done.:laugh:
Prove N. said:
its surprisingly smooth lol. And this is the one non-AOSP ROM I can fit in my petty 2GB SD Card
Can I have the source code for Phoenix Kernel? (Please , PM will work if you dont like publishing it)
Click to expand...
Click to collapse
i'm sorry but the original creator of phoenix kernel (Renoxtv) deleted his sources on his git, tho i have a backup one (but i don't know if it's really the phoenix ones).
here's the link : https://github.com/melekpro/android_kernel_samsung_grandpplte_mt6735
I never liked the Phoenix Kernel. Overclock attempts everywhere even to the charger current.
TBM 13 said:
I never liked the Phoenix Kernel. Overclock attempts everywhere even to the charger current.
Click to expand...
Click to collapse
It's fixed on the v3, and the kernel version that i use in that was v3
Shiroyuki82 said:
It's fixed on the v3, and the kernel version that i use in that was v3
Click to expand...
Click to collapse
In the kernel source you linked, renoxtv's overclock attempts stills there
sound alive
does this rom have sound alive (sound effect)? because i dont like dolby or viperfx ( sry my first time reply to this post )
Gonna download and test
TBM 13 said:
In the kernel source you linked, renoxtv's overclock attempts stills there
Click to expand...
Click to collapse
This processor doesn't like overclock xD
TBM 13 said:
In the kernel source you linked, renoxtv's overclock attempts stills there
Click to expand...
Click to collapse
i don't really know, but in charging. it's fast for me
1% to 50% in 1/2 hours, using original charger
ayyPANINI said:
does this rom have sound alive (sound effect)? because i dont like dolby or viperfx ( sry my first time reply to this post )
Click to expand...
Click to collapse
yea, updated and working fine
V3/Charlie Update Released!
-------------------------------------
RESERVED
The new update, v3 or Charlie, has some bugs when I first try installing it and it was stuck in a bootloop. Then I downloaded another file, which is the updated one named foxtrot and this one works and installed properly because I can tell that the launcher is very different plus the UI (I never read all the changelogs) and so far performance wise is really good and I can notice some improvement on the read/write speed of the system also there's almost no stuttering happening. Still, a really great rom
meends said:
The new update, v3 or Charlie, has some bugs when I first try installing it and it was stuck in a bootloop. Then I downloaded another file, which is the updated one named foxtrot and this one works and installed properly because I can tell that the launcher is very different plus the UI (I never read all the changelogs) and so far performance wise is really good and I can notice some improvement on the read/write speed of the system also there's almost no stuttering happening. Still, a really great rom
Click to expand...
Click to collapse
Foxtrot was a beta update, i changed the launcher because i notice some UI glitches in stock. maybe i'll return it in the next update. Thanks for your feedbacks and Enjoy the ROM
Happy Flashing!
-------------------------
Also, I will fix the lockscreen look, return it back to normal in the future update, my vietnamese friend @namcon created the UI.
So I backed up my messages, settings, notes and some other stuff to the my Samsung account before installing , but it doesn't seem like I can add a Samsung account on this ROM. Is there any way I can restore my backup from the Samsung cloud on this ROM?
I have v2 installed do i have to full format to install v3?
Well done! Very smooth and fluid. Keep it up!
But is there any way to add the fm radio?