Is there any way to get USB host functionality without the dock? Is it possible to use an OTG cable and a female to female USB adapter?
There is already a thread where this has been discussed: http://forum.xda-developers.com/showthread.php?t=1102049
Female to female adapter doesn't work.
What kind of usb adapter will i need to connect a PS3 controller to my iconia a500 tablet?
i cant post links but i found something called "Micro USB Male to USB Female OTG Cable" on dealxtreme website, it cots 2 bux . would that work?
nevermind, i didnt even realize that i have a full size usb that i can plugin to and dont have to use the microusb. i feel so dumb
I have been using a ps2-active usb adapter to run my old clicky keyboard to my A200, but thought that I will be upgrading to a 500 or 510 or 700 shortly so was going to try a micro usb-> female full sized usb cable since the full sized usb port is missing on most current tablets. I bought one on amazon but didn't get any connection and then saw it was a OTG cable after I ordered. I wasn't even sure to check first hand if there is any difference between a micro -> female full usb port cable that is OTG vs. non-OTG... or if I just have a defective cable.
It seams that the change to the MHL cable is to allow USB on Go with the same cable
http://www.gottabemobile.com/2012/06/29/galaxy-s-iii-new-mhl-connector-also-enables-usb-on-go/
Mr_Maz said:
It seams that the change to the MHL cable is to allow USB on Go with the same cable
http://www.gottabemobile.com/2012/06/29/galaxy-s-iii-new-mhl-connector-also-enables-usb-on-go/
Click to expand...
Click to collapse
I had a bunch this was the case! Thanks for confirming.
Sent from my GT-I9300 using xda app-developers app
But how would one plug a usb cable into the hdmi port?
The_Biz said:
But how would one plug a usb cable into the hdmi port?
Click to expand...
Click to collapse
there is a MHL adapter that gives you a male 11 pin micro USB to female HDMI so you can just plug a standard male to male HDMI cable from adapter to TV.
see:
Samsung Galaxy S III MHL to HDMI adapter
Does anyone know if this new adapter will work with the Galaxy Nexus, as well? Also, does it charge the phone--or at least keep it from being drained--when USB OTG is being used? I've been looking for a way to use USB OTG with a flash drive on my GN while also charging/powering the phone. USB OTG is a real power hog.
It should, but on mine it doesn't.
I've got a new MHL cable and a USB OTG cable in the hope I could plug my MHL into the SGS3, use a powered USB hub connected to the Micro USB on the MHL and then connect a keyboard and mouse into the USB hub, then connect the HDMI to the TV.
For me it doesn't work. I thought this was the whole reason they changed the MHL cable to the new type. Can anyone else confirm?
Logicalstep
can we get an update on this situation here? How
can we get MHL AND USB OTG?
My reading of the link is that the micro USB port has been repinned to provide USB on the go and not that the cable allows for this.On the mhl cable there is a female HDMI port and a micro USB ( both female) which must be used by the charger.
If the usb connection is also female type, we have to use a usb otg cable to get it work. But at the moment my phone also wont recognize any devices -.-' only mhl and nothing else.
I bought this adapter for 25 euros and want to have it working.
I also asked samsung on facebook 'bout this problem, and everything the told me:
Go support site...
very helpful.
I hope the will enable this feature in a future update.
Ok i know there is already a thread talking about ethernet to usb adapters but this is a little bit of a different situation. Today while cleaning one of the offices i work for a came across a USB to Ethernet CABLE. Not an adapter per se just a cable with both a male usb and male ethernet. Now i wanted to know is it possible to hook the USB side upto my OTG cable and plug the ethernet end into a router or hub and attain a wired connection?
zinv said:
Ok i know there is already a thread talking about ethernet to usb adapters but this is a little bit of a different situation. Today while cleaning one of the offices i work for a came across a USB to Ethernet CABLE. Not an adapter per se just a cable with both a male usb and male ethernet. Now i wanted to know is it possible to hook the USB side upto my OTG cable and plug the ethernet end into a router or hub and attain a wired connection?
Click to expand...
Click to collapse
its the same thing just as one piece
I have a few cables like this as well (1 end has USB and Ethernet, the other end has Ethernet). Can't say it's ever worked on my desktop though...
alright ill just have to give it a try when i get the chance
You are heading for trouble there. That cable is not a ethernet cable, it is to plug into a battery backup for monitoring. At best you would be risking damage to your tablet if you trying to use it like you described. And yes, it was a poor choice by the battery backup manufacturers to use a cat 5 connector on one end of their cables.