Hello Friends,
I am new user of XDE Development forum. If anything wrong then really sorry.
Anyway, I have an android device Samsung Galaxy Y GT-S5360. I need to install custom Rom. I have tried many times but failed. Here i am telling about the the thinks i have done already but didn't stressful.
I have downloaded
1.din3 v1.85.
2. Galaxy Y Rom from Sammobile.
That files only include one file called: S5360DDLA1_S5360ODDLA1_S5360DDLA1_HOME.tar.md5
3. I didn't find any
"pit" binary file
"DefaultCalDataWithBoot_...." md5 file
"PDA_...." md5 file
"MODEM_...." md5 file
"GT-S5360-MULTI-CSC-...." md5 file
But in a tutorial of Galaxy y flashing they said these files needed to Update Rom.
4. When i pressed at starting time Volume Down+ Home+ Power then show this message
Warning!!
---------------------------------------------
A custom OS can cause critical problems in your phone and installed applications.
If you want to download a custom OS, press the volume Up key. Otherwise, press the volume Down key to cancel.
Volume up: Continue
Volume down: Cancel (restart phone)
---------------------------------------------
5. My phone doesn't have rooted. Now i am unable to go to the recovery mode by pressing Volume Down+ Home+ Power Button.
I need a complete solution to How To Update My Galaxy Y Rom from PC.
Thanks in advance
find the thread of doky he has the stockrom...if you want a custom just flash one using CWM..
Step by step tutorial - Official updates with ODIN
alaminip said:
Hello Friends,
I am new user of XDE Development forum. If anything wrong then really sorry.
Anyway, I have an android device Samsung Galaxy Y GT-S5360. I need to install custom Rom. I have tried many times but failed. Here i am telling about the the thinks i have done already but didn't stressful.
I have downloaded
1.din3 v1.85.
2. Galaxy Y Rom from Sammobile.
That files only include one file called: S5360DDLA1_S5360ODDLA1_S5360DDLA1_HOME.tar.md5
3. I didn't find any
"pit" binary file
"DefaultCalDataWithBoot_...." md5 file
"PDA_...." md5 file
"MODEM_...." md5 file
"GT-S5360-MULTI-CSC-...." md5 file
But in a tutorial of Galaxy y flashing they said these files needed to Update Rom.
4. When i pressed at starting time Volume Down+ Home+ Power then show this message
Warning!!
---------------------------------------------
A custom OS can cause critical problems in your phone and installed applications.
If you want to download a custom OS, press the volume Up key. Otherwise, press the volume Down key to cancel.
Volume up: Continue
Volume down: Cancel (restart phone)
---------------------------------------------
5. My phone doesn't have rooted. Now i am unable to go to the recovery mode by pressing Volume Down+ Home+ Power Button.
I need a complete solution to How To Update My Galaxy Y Rom from PC.
Thanks in advance
Click to expand...
Click to collapse
--------------------
Downloadload DDLA1 from this link
http://hotfile.com/dl/146493408/c579b55/S5360DDLA1_S5360ODDLA1_ODD.zip.html
extract this zip file
Follow the steps - with odin installation
1. connect your mobile with pc
2. open odin
3. swithch off your mobile
4. go to download mode (Press Down volumu key + power + home buttons)
5. in odin, it showing com port in yellow color when your device detect.
Then browse files
PIT ---------- -totoro_0623.pit
Bootloader ---- BOOT_S5360DDLA1_REV05.tar.md5
PDA ---------- PDA_S5360DDLA1_REV05.tar.md5
Phone -------- MODEM_S5360DDLA1_REV05.tar.md5
CSC ---------- GT-S5360-MULTI-CSC-ODDLA1.tar.md5
then press start button.
I am not resposible for any damage or any other things to your devise, lot of people and me also try this method, there is no proble to me.
krishna_nirvana said:
--------------------
Downloadload DDLA1 from this link
hotfile.com/dl/146493408/c579b55/S5360DDLA1_S5360ODDLA1_ODD...................
extract this zip file
Follow the steps - with odin installation
1. connect your mobile with pc
2. open odin
3. swithch off your mobile
4. go to download mode (Press Down volumu key + power + home buttons)
5. in odin, it showing com port in yellow color when your device detect.
Then browse files
PIT ---------- -totoro_0623.pit
Bootloader ---- BOOT_S5360DDLA1_REV05.tar.md5
PDA ---------- PDA_S5360DDLA1_REV05.tar.md5
Phone -------- MODEM_S5360DDLA1_REV05.tar.md5
CSC ---------- GT-S5360-MULTI-CSC-ODDLA1.tar.md5
then press start button.
I am not resposible for any damage or any other things to your devise, lot of people and me also try this method, there is no proble to me.
Click to expand...
Click to collapse
Thanks friend. I am going to try out this. Could you please tell me:
1. About the Android Version for that link's ROM.
2. Is that Version able Bengali Language Support?
3. If electricity is gone during flashing time then any problem for Phone?
4. How many times need to finish the Flashing?
Friend I am waiting for your great response. Thanks again.
Lol, i pressed thanks instead of quote, Nevermind
1. About the Android Version for that link's ROM.
2.3.6
2. Is that Version able Bengali Language Support?
Its Indian ROM, didn't test for bengali language though.
3. If electricity is gone during flashing time then any problem for Phone?
Maybe you will have to flash the rom again
4. How many times need to finish the Flashing?
40 seconds to 1 min.
Aashik said:
Lol, i pressed thanks instead of quote, Nevermind
1. About the Android Version for that link's ROM.
2.3.6
2. Is that Version able Bengali Language Support?
Its Indian ROM, didn't test for bengali language though.
3. If electricity is gone during flashing time then any problem for Phone?
Maybe you will have to flash the rom again
4. How many times need to finish the Flashing?
40 seconds to 1 min.
Click to expand...
Click to collapse
Thanks friend. I have sucesfully flashed my phone.
But still i am facing problem. When i pressed (Volume Down+ Power+Home) buttons to go to recovery mode then still show this message:
Warning!!
---------------------------------------------
A custom OS can cause critical problems in your phone and installed applications.
If you want to download a custom OS, press the volume Up key. Otherwise, press the volume Down key to cancel.
Volume up: Continue
Volume down: Cancel (restart phone)
---------------------------------------------
Now i can't root the device. I want to root my device but can't access the recovery area (Volume Down+ Power+Home)
Please any solutions for this problem?
alaminip said:
Thanks friend. I have sucesfully flashed my phone.
But still i am facing problem. When i pressed (Volume Down+ Power+Home) buttons to go to recovery mode then still show this message:
Warning!!
---------------------------------------------
A custom OS can cause critical problems in your phone and installed applications.
If you want to download a custom OS, press the volume Up key. Otherwise, press the volume Down key to cancel.
Volume up: Continue
Volume down: Cancel (restart phone)
---------------------------------------------
Now i can't root the device. I want to root my device but can't access the recovery area (Volume Down+ Power+Home)
Please any solutions for this problem?
Click to expand...
Click to collapse
Volume Down + Power + Home ---- for Download Mode.
Volume UP + Power + Home ---- for Recovery Mode.
If you want root your mobile, you can go to recovery mode (Volume UP + Power + Home)
then select "update.zip" file from sd card, after then restart your mobile.
If you need updated.zip file, download form this link
http://forum.xda-developers.com/showthread.php?t=1378660
krishna_nirvana said:
Volume Down + Power + Home ---- for Download Mode.
Volume UP + Power + Home ---- for Recovery Mode.
If you want root your mobile, you can go to recovery mode (Volume UP + Power + Home)
then select "update.zip" file from sd card, after then restart your mobile.
If you need updated.zip file, download form this link
http://forum.xda-developers.com/showthread.php?t=1378660
Click to expand...
Click to collapse
Thanks Friend. I got that. That was my mistake.
Unable to recognise my usb port
Hi Friend,
Am also facing the same situation am also try to flash my samsung galaxy y i have downloaded all the files from the below given link, but when am try to connect my phone to pc its not recognising my phone i have updated my usb drivers in pc and i have tried the same process by connecting my phone to other pc/laptop too but its not recognosing.
Please let me know what can i do???
Thanks in Advance.
murali5115 said:
Hi Friend,
Am also facing the same situation am also try to flash my samsung galaxy y i have downloaded all the files from the below given link, but when am try to connect my phone to pc its not recognising my phone i have updated my usb drivers in pc and i have tried the same process by connecting my phone to other pc/laptop too but its not recognosing.
Please let me know what can i do???
Thanks in Advance.
Click to expand...
Click to collapse
http://www.mediafire.com/?5kcxc1yovvl6740 try this driver
and i suggest you to use package according to your region. to avoid any csc related problem or data connection issue
visit our development thread and find dokys post
Hi Friend,
I have installed the drivers from the mediafire link. After that when am trying to connect my device its ot detecting saying "unknown device" in device manager.
what i have to to now..??
is there any thing that i have to do special for my device.
Related
hello guys,
i rooted ma frds SGY, and i tried installing custom ROM USSR v5 in SGY by the given procedure on internet.
but i wiped the data and catch form recovery instead of CWM and
after rebooting the phone it stucked on SGY logo..
please help me out guys m noob..
shreenathSV said:
hello guys,
i rooted ma frds SGY, and i tried installing custom ROM USSR v5 in SGY by the given procedure on internet.
but i wiped the data and catch form recovery instead of CWM and
after rebooting the phone it stucked on SGY logo..
please help me out guys m noob..
Click to expand...
Click to collapse
REQUIREMENTS: ODIN 1.85 ( JUST DOWNLOAD 1.85 ) FIRMWARES (LATEST OR DUNNO) FIRMWARES CLICK HERE SAMSUNG DRIVERS and Samsung Kies...
(ONCE U DOWNLOAD UR FIRMWARE..UNPACK IT)
(ONCE U UNPACK U WILL HAVE 3 FILES PDA.BLAHBLAH.tar.md5,CSC.BLAHBLAH.tar.md5 AND MODEM.BLAHBLAH.tar.md5)
1. OPEN ODIN...
2. CLICK THE PDA BOX THEN CHOOSE THE PDA_S5360_XXXX.tar.md5 (THAT XXXX IS THE FIRMWARE VERSION)
3. CLICK THE PHONE BOX THEN CHOOSE THE MODEM_S5360_XXXX.tar.md5 (THAT XXXX IS THE FIRMWARE VERSION)
4. CLICK THE CSC BOX THEN CHOOSE THE CSC_S5360_XXXXX.tar.md5 (THAT XXXXX IS THE DUNNO)
5. NOW PUT YOUR PHONE TO DOWNLOAD MODE
(TO GO TO DOWNLOAD MODE.....PRESS AND HOLD VOLUME DOWN BUTTON,HOME BUTTON AND POWER BUTTON)
(ENOUGH PRESSING AND HOLDING THE VOLUME DOWN BUTTON,HOME BUTTON AND POWER BUTTON WHEN U SEE THE WARNING) ( LEAVE ALL TO DEFAULT EXCEPT THE PDA,PHONE AND CSC )
6 CONTINUE TO DOWNLOAD MODE BY PRESSING VOLUME UP BUTTON
7. UR NOW IN DOWNLOAD MODE...
8. GET YOUR USB CONNECTOR AND PLUG IT TO YOUR PHONE AND TO PC....
9. U WILL SEE 0:[COMXX] ( XX IS ANY NUMBER )
10. PRESS START....
11. YOUR NOW IN STOCK ROM...ENJOY
ITS MY FIRST TIME HELPING PLEASE GIVE ME A THANKS LOL
If u are allow to access the recovery, try to rewipe data & cache
Sent from my GT-S5360 using xda premium
not workin
Thanx for rly.
I did the same way u mentioned but when i press the start button it shows FAIL in upper left box.
And nothing happens. What should i do now?
i download S5360_DDLA3_ODDLA2_DDLA2 (revision 1) this version of firmware package.
I have a Samsung Galaxy S (i9000). If I connect it to PC, I can see it is charging but I can not see the phone nor in Explorer or Download Mode.
The phone is using [NIGHTLY][ROM][4.2.1] CyanogenMod 10.1 for Samsung Galaxy S and I have installed it via CWM. No matter what ROm I installed via CWM, I could not see the phone in Explorer.
Another problem I encountered is that the phone can not be shut down: if I choose Shut Down it is restarting.
Any help will be appreciated.
Thank you.
Are you on windows 8?
Install the newest USB-Driver in Windows-7-Compatibility-Mode. If you are not on windows 8 it could help anyway.
http://forum.xda-developers.com/showthread.php?t=961956
Another solution for accesing your phone would be Airdroid on Play Store https://play.google.com/store/apps/...t=W251bGwsMSwxLDMsImNvbS5zYW5kLmFpcmRyb2lkIl0.
I would try to reflash your rom to solve your other problem.
I am using Windows 7.
I want to access Download Mode in order to change the ROM with ODIN.
I do not know how to reflash it. Can you provide me more details?
Thank you.
Save your Data and make a backup before doing anything.
First of all try to go to recovery wipe chache + dalvik + fix permissions reboot
Factory-Reset would be next to try.
If wiping does not help:
Solution 1 - Odin:
Access Download Mode over Powermenu -> Bootloader
or with shutdown (in your case press power ~8 seconds or remove battery), press volume-down + home + power than flash a rom with Odin.
Solution 2 Download your prefered rom copy the zip-File to your phone and flash it through recovery (same way you installed CM 10.1). Wipe cache + dalvik in recovery.
HOWTO GET INTO RECOVERY:
- Turn off your Phone
- Hold VOLUME UP + HOME Buttons
- While holding VOLUME UP + HOME Buttons press POWER Button until Display lights up, then release only POWER Button
- Still hold VOLUME UP + HOME until you got into Recovery
- Release all Buttons
------------------------------------------------------------------
HOWTO GET INTO DOWNLOAD-MODE (Bootloader):
- Turn off your Phone
- Hold VOLUME DOWN + HOME Buttons
- While holding VOLUME DOWN + HOME Buttons press POWER Button until you reach Download-Mode
- Release all Buttons
Thank you for answering my question, but I already did all of above. Even so, the problem is that my phone can not be seen in Download Mode.
micutzul said:
Thank you for answering my question, but I already did all of above. Even so, the problem is that my phone can not be seen in Download Mode.
Click to expand...
Click to collapse
But you managed to install a working rom?
Tried with another usb-cabel, computer or usb-port?
Perhaps this helps, although i never used Mobile Odin.
http://forum.xda-developers.com/showthread.php?t=1347899
I have decided to upgrade my Huawei U8800Pro stock ICS 4.0.3 to CyanogenMod 10.2 JB 4.3.
Quickly I realized that this is easily said than done. Tutorials I have found on the Internet are not good. They lead me to brick my phone twice during this process, so I've decided to share my experience with community. Here are step by step instructions:
Prerequisites:
I didn't bother to write any hyper-links, because they will probably be dead by the time you read this. Instead I wrote name of the files you can search in google.
Root_u8800pro.zip containing unlockbootloader_u8800pro.exe
AndroidHandsetUsbDriver_v1.zip containing DriverSetup.exe
gapps-jb-20130813-signed.zip
cm-10.2-20130929-U8800pro-VIDEOPLAYBACK.zip (here the ROM thread: http://forum.xda-developers.com/showthread.php?t=2409681)
recovery6.0.3.3.img (I recomend non touch version)
HUAWEI_U8800P_Android_2.3_V100R001C00B521_Oversea_Normal_05010TXB.zip, containing dload folder (link)
404029_4.0_BasebandCWM.zip
When you have all those in place, you can start with procedure:
Install USB drivers for your phone. Run DriverSetup.exe
Connect your phone to USB and wait to get detected. Then run unlockbootloader_u8800pro.exe (chose first button and wait).
Optionaly download Root Checker from Google Play to see if your phone was rooted. You can skip this step.
Copy dload folder to root of your SD card
Unplug USB cable and turn phone off
Press Volume up + Volume down + Power on at the same time. Hold them till you see that your phone started with firmware update procedure. Wait for procedure to finish. Now you should have stock GB 2.3 rom on your phone.
Turn off your phone
Press Volume up + Volume down + Power on at the same time, and wait till you see pink screen
Connect USB cable and wait till Windows detect your phone and show you image folder. Go to that folder and backup original recovery.img.
Copy recovery6.0.3.3.img to image folder and rename it to recovery.img
Turn off your phone
Press Volume up + Power on at the same time and hold till you see recovery console
Chose factory reset
Chose clear cache
Chose advanced/clear dalvik cache
Flash 404029_4.0_BasebandCWM.zip
Flash cm-10.2-20130929-U8800pro-VIDEOPLAYBACK.zip
Flash gapps-jb-20130813-signed.zip
Reboot your phone
Wait till setup wizard of CynogenMod apears
If all went well you should have CyanogenMod upp and running on your phone.
I'm not responsible If you brick your phone. I did it twice before I finally succeeded :laugh:.
How to unbrick u8800pro:
You can always get back to good old Android 2.3 folowing this procedure:
Copy dload folder from HUAWEI_U8800P_Android_2.3_V100R001C00B521_Oversea_ Normal_05010TXB.zip to the root of your SD card
Turn off your phone
Hold down Volume up + Volume down + Power on and let firmware update do it's job
List of useful key combinations:
Assuming your phone is turned off.
Go to pink screen Volume up + Volume down + Power on
Go to recovery console Volume up + Power on
thanks, dude!
but no link found for cm-10.2-20130929-U8800pro-VIDEOPLAYBACK.zip
sad?!!!
mayank88288 said:
thanks, dude!
but no link found for cm-10.2-20130929-U8800pro-VIDEOPLAYBACK.zip
sad?!!!
Click to expand...
Click to collapse
You can find link in this thread:
http://forum.xda-developers.com/showthread.php?t=2409681
Good guide
Sent from my U8800Pro using XDA Premium 4 mobile app
sajmons said:
I have decided to upgrade my Huawei U8800Pro stock ICS 4.0.3 to CyanogenMod 10.2 JB 4.3.
Quickly I realized that this is easily said than done. Tutorials I have found on the Internet are not good. They lead me to brick my phone twice during this process, so I've decided to share my experience with community. Here are step by step instructions:
Prerequisites:
I didn't bother to write any hyper-links, because they will probably be dead by the time you read this. Instead I wrote name of the files you can search in google.
Root_u8800pro.zip containing unlockbootloader_u8800pro.exe
AndroidHandsetUsbDriver_v1.zip containing DriverSetup.exe
gapps-jb-20130813-signed.zip
cm-10.2-20130929-U8800pro-VIDEOPLAYBACK.zip (here the ROM thread: http://forum.xda-developers.com/showthread.php?t=2409681)
recovery6.0.3.3.img (I recomend non touch version)
HUAWEI_U8800P_Android_2.3_V100R001C00B521_Oversea_Normal_05010TXB.zip, containing dload folder (link)
404029_4.0_BasebandCWM.zip
When you have all those in place, you can start with procedure:
Install USB drivers for your phone. Run DriverSetup.exe
Connect your phone to USB and wait to get detected. Then run unlockbootloader_u8800pro.exe (chose first button and wait).
Optionaly download Root Checker from Google Play to see if your phone was rooted. You can skip this step.
Copy dload folder to root of your SD card
Unplug USB cable and turn phone off
Press Volume up + Volume down + Power on at the same time. Hold them till you see that your phone started with firmware update procedure. Wait for procedure to finish. Now you should have stock GB 2.3 rom on your phone.
Turn off your phone
Press Volume up + Volume down + Power on at the same time, and wait till you see pink screen
Connect USB cable and wait till Windows detect your phone and show you image folder. Go to that folder and backup original recovery.img.
Copy recovery6.0.3.3.img to image folder and rename it to recovery.img
Turn off your phone
Press Volume up + Power on at the same time and hold till you see recovery console
Chose factory reset
Chose clear cache
Chose advanced/clear dalvik cache
Flash 404029_4.0_BasebandCWM.zip
Flash cm-10.2-20130929-U8800pro-VIDEOPLAYBACK.zip
Flash gapps-jb-20130813-signed.zip
Reboot your phone
Wait till setup wizard of CynogenMod apears
If all went well you should have CyanogenMod upp and running on your phone.
I'm not responsible If you brick your phone. I did it twice before I finally succeeded :laugh:.
How to unbrick u8800pro:
You can always get back to good old Android 2.3 folowing this procedure:
Copy dload folder from HUAWEI_U8800P_Android_2.3_V100R001C00B521_Oversea_ Normal_05010TXB.zip to the root of your SD card
Turn off your phone
Hold down Volume up + Volume down + Power on and let firmware update do it's job
List of useful key combinations:
Assuming your phone is turned off.
Go to pink screen Volume up + Volume down + Power on
Go to recovery console Volume up + Power on
Click to expand...
Click to collapse
i'm using u8800 pro.i installed CM10.2.but wifi is not working on my phone and gapps also not working.....pls help.....
Hello
Before 1 week I return from my work and I try to turn on my s7 edge to check my emails, messages, etc
But it doesn't work, I try to charge it but its dead and no reaction
So I plug it in my laptop and then I get a message with ONLY RED words say bootloader... *((USB Dubbing its Turned ON I forget to turn it OFF))
Acctually before I get this problem, I Try to use the DR.fone app in desktop to recover a lost photo for non-root device, after all I don't find the pic, then I close it but I forget to turn off the USB Dubbing and I forget to delete it
Please help guys ,my warranty didn't do any thing
So if there is no way to relive my device, I need just my files back its very important, ((samsung backup turned off))
Thanks!
imgur.c0m/a/Y7u7W
Imgur.c0m/a/pDQdy
Note: im new in xda so I can't put pictures or url
So I change com to c0m
Change it to see the problem
Hello, download the latest bootloader of the S7Edge, and then put your phone in download mode. With odin, flash the bootloader (BL case) to your phone.
NeoVander said:
Hello, download the latest bootloader of the S7Edge, and then put your phone in download mode. With odin, flash the bootloader (BL case) to your phone.
Click to expand...
Click to collapse
Thank you! But acctually im noop in odin
so can u tell me what I do step by step? And another thing
I CAN'T get into the download mode, it won't work with me,
But when I connect it to odine, I can see my device there and I can adding files maybe
So where I can download the stuff and what I do?
+
There is a way to recover my data?
Thanks!
Phone part :
~ Get into Odin Mode :
Press "Power" + "Volume Down" 8 seconds
Then press "Volume Down", "Power" and "Home" until you see a message, then press "Volume Up"
You are now in the Odin Mode / Download Mode.
Computer part :
~ Download the latest BootLoader and Modem here : https://www.androidfilehost.com/?w=files&flid=54002
~ Download the latest odin here :
http://odindownload.com/download/Odin3_v3.12.3.zip
~ Start Odin, and in the "AP" case, select the "bootloader".tar.md5
~ Connect the S7 Edge to your computer
~ Press "Start"
The phone should reboot
NeoVander said:
Phone part :
~ Get into Odin Mode :
Press "Power" + "Volume Down" 8 seconds
Then press "Volume Down", "Power" and "Home" until you see a message, then press "Volume Up"
You are now in the Odin Mode / Download Mode.
Computer part :
~ Download the latest BootLoader and Modem here : https://www.androidfilehost.com/?w=files&flid=54002
~ Download the latest odin here :
http://odindownload.com/download/Odin3_v3.12.3.zip
~ Start Odin, and in the "AP" case, select the "bootloader".tar.md5
~ Connect the S7 Edge to your computer
~ Press "Start"
The phone should reboot
Click to expand...
Click to collapse
Thank you!! I will do it soon...
After (more or less) successfully flashing my S10 5G (assume S10+ as it has 6.7 Inch display) to a custom ROM, I got nag screens from Knox security telling me it wasn't running the software Samsung wanted it to, dangerous etc. and fiddled around some more, when I accidentally bricked it with a failed Odin transfer.
Now it only shows a turquoise colored screen with a big precaucion icon and the words "An error has occurred while updating the device software. Use emergency recovery function in the Smart Switch PC software" but I'm not sure to what this exactly refers and whether really Samsung software is prepared to catch up this situation. It does show up in Odin but I can't seem to get it back working.
Any help is much appreciated!
You can use Samfirm and odin to restore firm :
It explain how to install official ROM and how root , just ignore Magisk install and the AP repatch.
To force download mod , push power and vol - to force restart the phone ... and when the screen going off , push bixby and vol - and directly put the usb cable in the phone from your pc. To valid the download mod press vol +.
DemotionFR said:
You can use Samfirm and odin to restore firm :
It explain how to install official ROM and how root , just ignore Magisk install and the AP repatch.
To force download mod , push power and vol - to force restart the phone ... and when the screen going off , push bixby and vol - and directly put the usb cable in the phone from your pc. To valid the download mod press vol +.
Click to expand...
Click to collapse
Thanks, this did it!!
You are welcome