Database Users

How to install custom roms like Corvus5 and other ?

How to install custom roms like Corvus5 and other ? with
CWM?

I got my Vega 2 days ago and first thing I did was put Vegacomb on it, here's a guide I knocked myself up from various forums to do that:
turn on tablet and turn on USB debugging
shut down the Vega (hold down power for 6 seconds)
Launch VegaTools
go to extras tab
Start USBDeview
within USBDeview find and uninstall all nVideia devices (right click and uninstall)
with vega turned off, connect to PC via USB
hold the back button for 2 seconds
while still holding back, hold power buttons for 2 seconds
release power button but hold the back button for 2 seconds
the Vega should then boot into recovery (nothing on screen, not even backlight)
Windows will find a new device with no drivers
Start AUDI by right clicking and running as administrator
choose “I want to install the Advent “stock ROM” using recovery”
The red box at the bottom should now say “The recovery driver is NOT correctly installed. Proceed to step 3”
Press the Next step button.
proceed to press the “Part C: Install correct driver” button, and in the prompt choose “Just get on with it. Do it for me!” and click the Do it button.
Installing ModdedStock:
run the VegaModdedStock_v1.10_v2.exe file as Administrator.
turn the tablet on
Installing VegaComb:
go into Recovery App (on the Vega)
this will enter clockwork recovery
(volume = up & down, power = enter, back = back)
nandroid backup
Partition the SD card to allow Apps2SD
Turn on USB host to put the vegacomb ROM on the SD card
wipe data/factory reset
wipe cache partition
advanced > wipe dalvik cache
toggle signature verification (set to disabled)
choose zip from SD
find the vegacomb ROM
choose zip from SD
find the vegacomb ROM update
reboot system now
done!

ql4w0j7 said:
How to install custom roms like Corvus5 and other ? with
CWM?
Click to expand...
Click to collapse
Hello mate,
If your like me and wantra simple walk through... follow this guide
http://www.hungrycodemonkey.com/blo...t-vega-android-tablet-vegacomb-beta-–-part-2/
just remember to includded the modded stock rom, its not in this guide but some one has commented about it so follow there link.

[HELP] Restoring of brick Huawei U8800

Restoring of brick Huawei U8800.
All do at your own risk! I am not responsible for your machines!
Today I was able to magically (just wonderful, because it found the time at which there is a chance to run the update) to recovery from a brick Huawei U8800 (corrupted bootloader + recovery not run + in a pink screen not mounted hard drive + when trying to update the written Update failed! I spoke to a service center, they said the warranty is not the case and we must change the motherboard (the cost of 3-4 million BYR, new at the MTS salon cost 2.9 million BYR )
What and how I did:
1) To restore I'am using the firmware B162 Android.
2) Format the micro SD card that was clean (I was 8 gb, 2 class and be sure to FAT 32) and unpack "dload" folder and ".txt" file(with a strange name) from the downloaded archive to sdcard.
P.S. I say that not all flash drives can operate restore, I have like three went, normally only one.
3) Insert the micro SD into the phone and pull out the battery.
4) Hold down the Volume (+) and power up, hold and connect the phone via cable to your PC, your phone will be switched on and the logo appear, then turned off my phone (missing logo). So, when the logo will disappear (ie the phone will turn off) and immediately hold down the volume (-) the volume (+) and power up.Main that the updating process can start only one time after the logo was gone, if after a few times in a row press both the volume keys and power up, updating does not start, it is necessary to re-clamp the volume (+) and the power up, after the disappearance of the logo, both the volume and the power up of ... I have to go to the upgrade process if you wrote "Update failed!", try again (I went with 2 times).
5) After a successful update, the phone will reboot, on reboot he should loaded the standard blue recovery.
6) Turn off the phone from the computer, insert the battery, hold down the volume (-) the volume (+) and turn on, wait until you get a pink screen, release the button and connect it to your computer. You should see a new device and to define a disk drive with a folder "image". If we define - rejoice!) If not, then you need to install the driver on the internet enough to the driver, as well as the wood in my going to the Android SDK, not sure ...
7) Thus, we can assume the phone repaired) Download recovery 4.0.0.5 and unpack the archive and copy the file "recovery.img" to a folder "image" with the replacement. A man does not 4.0.0.5 recovery loaded, it is strange, but recovery 5.0.2.7 normally loaded
8.) Disconnect the phone from the computer, pull out / insert the battery and try to enter the recovery (volume (+) and power up).
9) If set, then everything is OK and can now be sewing. I still put 2.2 Geno v8.4 + software package from Google, but I recommend again read all instructions on the firmware, to avoid problems!
Good luck, hope that helped someone, he sat on the forums more than one day, but have not found a solution.
If someone has turned out, a sign of gratitude you can throw money on my phone +375297176005 (MTS, Belarus), would be very grateful
P.S.
Instructions is my and it's my first, that do not copy and paste, you can search the Internet. Do not judge strictly, if something is not designed ...
If there are people who helped, I think you can throw his hat in the description. My message is also present in our 4pda.
Hope springs eternal
Sorry for my english, I'm from Belarus and bad know it

Before the restoration, can you open your phone? Mine was completly down. I can't power on or go to recovery or install any official roms.

Özgürce said:
Before the restoration, can you open your phone? Mine was completly down. I can't power on or go to recovery or install any official roms.
Click to expand...
Click to collapse
my phone is also not included, only in
a pink boot screen, but on the computer the drive was
not detected

Please, if someone came to restore, write

greeshan said:
Please, if someone came to restore, write
Click to expand...
Click to collapse
omg, this looks so sad, I guess we are in the same page. BRICK phone. no power, no screen no nothing... well, actually no, it vibrates when battery is inserted or cable is connected, but, other than that, niente.

I had follow all ur instruction but when i press volume up + power with usb connected it goes to the CWM...so i just press vol up + down + power...It goes PINK SCREEN...Any more solution please?

i did it! but after 5 times i see this message: "update failed"

i have the same problem

r0y123 said:
i have the same problem
Click to expand...
Click to collapse
Hello, I have a problem after changing recovery.img. Now after power on only error message: Image signature verify fail. Your boot/recovery image may have an incorrect signature. Please update your image to a signature official one. You can remove battery for power down.
When I get to pink screen - no disk appears in my PC. Please, what can I do now?

greeshan said:
Please, if someone came to restore, write
Click to expand...
Click to collapse
My update process stops at 1/4 of the bar.What can i do?

greeshan said:
my phone is also not included, only in
a pink boot screen, but on the computer the drive was
not detected
Click to expand...
Click to collapse
Just thought I would mention it, if you connect the pink screen to Ubuntu/Linux, it will most likely mount.

Just tried this recovery method on a bricked U8800. Didn't do anything at all. Must admit that it was bricked in a way that i didn't see anything at all on the screen. Neither did i notice anything in dmesg on a linux machine.

Help
Hello.my huawei u8800pro v.2.3.5 brick after install official ice cream sandwich.I followed the procedure and now I have a new removable but I can't go to recovery mode!!can I install a new rom?

[SERIOUS HELP] My Nexus One cannot reboot

My Nexus One is rooted (I forgot how I did it).
Last night suddenly my phone went off and could not reboot anymore. It stayed on "X" screen forever. I tried to hard reset (i.e. Pressing volume down and power button). Then I pressed "Recovery" and then it went restart and stayed on "X" screen forever again. What can U do?
Please help, I am a new root user. please teach me step by step to do so. thanks.

Turn it off. Hold the trackball while starting it up. If you have usb debugging on and working fastboot drivers, you can wipe your phone (fastboot -a in cmd) and flash an img file of like a stock ROM.
Sent from my Nexus One using Tapatalk

Thanks Theshawty, donno why my Nexus One can't even boot up now

wingod513 said:
Thanks Theshawty, donno why my Nexus One can't even boot up now
Click to expand...
Click to collapse
I had read some other members did some tricks to their phone by remove the SD card and reboot the phone. BTW, is the battery fully charged? Try to pull the battery and then put it back on.

wingod513 said:
My Nexus One is rooted (I forgot how I did it).
Last night suddenly my phone went off and could not reboot anymore. It stayed on "X" screen forever. I tried to hard reset (i.e. Pressing volume down and power button). Then I pressed "Recovery" and then it went restart and stayed on "X" screen forever again. What can U do?
Please help, I am a new root user. please teach me step by step to do so. thanks.
Click to expand...
Click to collapse
Step by step new ROM for nexus one and restoring....
ADDITIONAL information for people who don't know to use passim.zip and update.zip
1-passimg.zip
a-Download the Passion_Google_WWE_2.16.1700.1_FRG33_MFG_Shipment_ ROM.z
ip link ( 1st link)
b-Rename the file to passimg.zip ( in windows take care of renaming it passimg.zip.zip)
c-copy it into the root of your SD card
d-turn of your phone
e-Press and hold the power button + vol. down button until a white screen showing android buddies skating at the bottom appears
f- the phone will automatically read the passimg.zip ( will load and then check it) after it is check it will ask you to press volume up to confirm the updates
g-the device will reboot then go to the SD card and DELETE THE PASSIMG.IMG file
then it is done
2-update.zip
a- download the corresponding update file from the steps above
b- rename the file to update.zip( again in windows take care of the update.zip.zip rename problem)
c- copy the file to the root of your SD card
d- turn off the phone
e-Press and hold the power button + vol. down button until a white screen showing android buddies skating at the bottom appears
f-wait for 4 sec. the using the volume down and up buttons to go up and down go the RECOVERY and then press the power button to select
g-it will load the nexus logo then will show the android buddy with an exclamation mark .... press power button + volume up button
h-choose using the trackball the apply SD card:update.zip option
the phone will go through some process verifying package... verifying software version and the end the phone will restart to finish the update ( Notice: in some updates it doesn't restart automatically so just choose the "reboot system now" option)
i- AFTER THE PHONE RESTART ALWAYS REMEMBER TO DELETE THE OLD UPDATE.ZIP FILE TO PUT THE NEW ONE FOR THE NEXT UPDATE according to the above steps
Hope this post is helpful for some people and if there is any missing steps or mistakes i would like if someone help me with an advice
Download linksonly the link of the stock rom i had to upload it cause it isn't available anymore on the google servers)
-stock ROM "FRG33"==> http://www.multiupload.com/NTA9DANZGC
-from FRG33 to GRI40 ==> http://android.clients.google.com/p...b119f8.signed-passion-ota-102588.656099b1.zip (thanks to efrant)
-Update FRG33 to FRG83 ==>http://android.clients.google.com/p...01ae02c.signed-passion-ota-60505.766a101a.zip
-Update FRG83 to FRG83D ==> http://android.clients.google.com/p...signed-passion-FRG83D-from-FRG83.ecb21b75.zip
-Update FRG83D to FRG83G ==> http://android.clients.google.com/p...igned-passion-FRG83G-from-FRG83D.2854b06b.zip
-Update FRG83G to GRI40 ==>http://android.clients.google.com/p...signed-passion-GRI40-from-FRG83G.81304b2d.zip

taodan said:
I had read some other members did some tricks to their phone by remove the SD card and reboot the phone. BTW, is the battery fully charged? Try to pull the battery and then put it back on.
Click to expand...
Click to collapse
I tried this already but still not work, I had brought my phone to some third party mobile repair centre, they said my N1 is CPU broken and will cost around US$96 to replace with a new CPU (HTC need around US$190 for mother board). I paid US$96 anyways. not sure if it worth.
cnalbant said:
Step by step new ROM for nexus one and restoring....
ADDITIONAL information for people who don't know to use passim.zip and update.zip
1-passimg.zip
a-Download the Passion_Google_WWE_2.16.1700.1_FRG33_MFG_Shipment_ ROM.z
ip link ( 1st link)
b-Rename the file to passimg.zip ( in windows take care of renaming it passimg.zip.zip)
c-copy it into the root of your SD card
d-turn of your phone
e-Press and hold the power button + vol. down button until a white screen showing android buddies skating at the bottom appears
f- the phone will automatically read the passimg.zip ( will load and then check it) after it is check it will ask you to press volume up to confirm the updates
g-the device will reboot then go to the SD card and DELETE THE PASSIMG.IMG file
then it is done
2-update.zip
a- download the corresponding update file from the steps above
b- rename the file to update.zip( again in windows take care of the update.zip.zip rename problem)
c- copy the file to the root of your SD card
d- turn off the phone
e-Press and hold the power button + vol. down button until a white screen showing android buddies skating at the bottom appears
f-wait for 4 sec. the using the volume down and up buttons to go up and down go the RECOVERY and then press the power button to select
g-it will load the nexus logo then will show the android buddy with an exclamation mark .... press power button + volume up button
h-choose using the trackball the apply SD card:update.zip option
the phone will go through some process verifying package... verifying software version and the end the phone will restart to finish the update ( Notice: in some updates it doesn't restart automatically so just choose the "reboot system now" option)
i- AFTER THE PHONE RESTART ALWAYS REMEMBER TO DELETE THE OLD UPDATE.ZIP FILE TO PUT THE NEW ONE FOR THE NEXT UPDATE according to the above steps
Hope this post is helpful for some people and if there is any missing steps or mistakes i would like if someone help me with an advice
Download linksonly the link of the stock rom i had to upload it cause it isn't available anymore on the google servers)
-stock ROM "FRG33"==> http://www.multiupload.com/NTA9DANZGC
-from FRG33 to GRI40 ==> http://android.clients.google.com/p...b119f8.signed-passion-ota-102588.656099b1.zip (thanks to efrant)
-Update FRG33 to FRG83 ==>http://android.clients.google.com/p...01ae02c.signed-passion-ota-60505.766a101a.zip
-Update FRG83 to FRG83D ==> http://android.clients.google.com/p...signed-passion-FRG83D-from-FRG83.ecb21b75.zip
-Update FRG83D to FRG83G ==> http://android.clients.google.com/p...igned-passion-FRG83G-from-FRG83D.2854b06b.zip
-Update FRG83G to GRI40 ==>http://android.clients.google.com/p...signed-passion-GRI40-from-FRG83G.81304b2d.zip
Click to expand...
Click to collapse
Thanks, I will try this after my phone get fixed.

cnalbant said:
-stock ROM "FRG33"==> http://www.multiupload.com/NTA9DANZGC
-Update FRG33 to FRG83 ==>http://android.clients.google.com/p...01ae02c.signed-passion-ota-60505.766a101a.zip
Click to expand...
Click to collapse
These links not working, please help me update. thanks

are you sure you just didn't lose your recovery

rugmankc said:
are you sure you just didn't lose your recovery
Click to expand...
Click to collapse
Sorry, what do you mean?
Sent from my GT-N7000 using xda premium

wingod513 said:
Sorry, what do you mean?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
If your bootloader is unlocked, just flash a new recovery from fastboot Otherwise unlick it anyway.
Sent from my Hypersensed Nexus One using xda.

race55 said:
If your bootloader is unlocked, just flash a new recovery from fastboot Otherwise unlick it anyway.
Sent from my Hypersensed Nexus One using xda.
Click to expand...
Click to collapse
The bootloader of my N1 is unlocked, I am not familiar with fastboot thing. My friend helped mine root and he is out of my country now. Gotta follow cnalbant's steps and see.

Install ClockworkMod Recovery on Nexus One Manually
Step 1: Download ClockworkMod Recovery: recovery-clockwork-2.5.1.1-passion.img (there are more current, look at the xda)
Step 2: Set up ADB for Nexus One
Step 3: Put the downloaded recovery-clockwork-2.5.1.1-passion.img in C: drive
Step 4: Turn Nexus One off and connect it to PC via USB
Step 5: Hold the Power button + Trackball together to start Nexus One in fastboot mode
Step 6: Once in fastboot mode, open Terminal / Command Prompt and run following command:
fastboot devices
This command will check if your device is connected in fastboot mode or not.
Step 7: Now run following command (place the file recovery in the same folder where the fastboot):
fastboot flash recovery recovery-clockwork-2.5.1.1-passion.img
This will install Clockwork recovery on your Nexus One.
That’s it, enjoy!

You can either follow the above guide or this amon ra recovery guide
forum.xda-developers.com/wiki/HTC_Nexus_One/Recovery_Images
Amon ra is another recovery just like clock workmod
B4 using adb download the drivers of adb and fastboot
www.mediafire.com/?bhxmn903d6cz9eg
When you connect ur phone use device manager to locate the connection on win 7 and select install drivers frm folder and install frm the extracted folder of adb driver
Sent from my HTC Nexus One using XDA

[Solved-Q] Must be a moron, but I just can't get vol+/power-button to CWM-R to work

This is a painful message to write, but I am desparate. This should be so simple!
Have a U8800 standard (at least it says only "U8800" in settings/about phone.
What have I done:
- Upgraded some time ago to 2.3.5 Rev B522 from Huawei.
- Then rooted it with SuperOneClick.
- Installed ClockWorkMod from Play Store.
- Downloaded CWM Recovery 5.5.0.4 stable from xda and placed the file into the /.cust-backup/image folder via Remount.
- Turned off Fast boot under settings/applications
:: What worked/happened.
- Rooting went fine, ES file explorer and others get root-permissions ok.
- But got into CWMRecovery only via CWM program (Choosing "Reboot into recovery"). Never with the holding buttons vol+ and power-button during power-on.
Figured it was that locked bootloader on B522 that was the problem.
What I did:
- Followed the instructions in http://forum.xda-developers.com/showthread.php?t=1457490 (Get your pink screen back).
- In CWM Recovery flashed "update-B518-bootloader.zip".
- Got "ok installed or something to that effect" from CWM Recovery.
:: What worked/happened.
- Still could not get into CWMRecovery via button-holding. Tried reflashing the B518 bootloader a few times, but just no difference.
Read somewhere that each Huawei firmware-release comes with it's own bootloader, so lets try to install Huawei B518.
- Only place I could find the image was here http://huaweiideosx5.blogspot.no/2012/03/u8800-b518-23-software.html
- U8800V100R001C00B518G001.zip
- Had to take out the external SD-card to get the /sdcard/dload directory on the internal SD-card.
-Seems to be important to have dload on the internal SD-card and not the external.
- Booting the phone with vol+, vol-, power did not start the downgrade, but was able to trigger it via settings/storage/software upgrade.
After downgrade to B518 (Checked version in settings/about phone):
- Deleted /sdcard/dload directory.
- Rooted with SuperOneClick
- Installed ClockWorkMod from play store again.
- Put CWM Recovery 5.5.0.4 into ./cust_backup/image again (think this was unecessary. I think it was already there but did it anyways)
- Turned off Fast boot under settings/applications.
:: What worked/happened.
- The phone is now in B518 software, but still can not get into CWM Recovery via keypressing at boot.
I hold the vol+ and power-buttons all the way to "desktop" so to say, but can not for the life of me get into CWM Recovery that way. Getting into CWM recovery 5.5.0.4 via instructing CWM application to boot into recovery works fine, though.
I am drooling at the thought of ICS Aurora, but I don't dare before I can reliably get into CWM Recovery via keypress.
Sorry if this is very stupid post, but I have tried so much.

Maybe the volume buttons are faulty? Turn off the phone and try this: hold down volume up; while holding press power button as long as the logo comes up. Release power button but continue holding volume up. If it did not work, try doing same with volume down.

Yeah, do what Blefish advised you but do it while the phone is off and charging. I have a kinda broken power key and with this 'trick' it boots faster and more reliable. Keep holding the 3 buttons until you see the recovery.
Sent from my U8800

Thank you both for trying to help me here!
Unfortunately I have had no luck with your suggestions.
Re: Broken keys.
Power and volume-buttons seems to work well when the phone is on. Also when I boot into recovery through the CWM program, navigate to advanced/key-test, the vol+, vol- and power button seems to work well there too.
On pressing the power-button, CWM-R reports Key: 116
On pressing the vol+-button, CWM-R reports Key: 115
On pressing the vol--button, CWM-R reports Key: 114
So I think the keys must be ok, right?
Blefish: I did what you suggested, as I understood it.
When the phone boots, there are three stages of logos.
1. A static logo of Huawei's red "fan?".
2. A short "comet" animation.
3. An animated logo of Huawei's "fan", where some highlight flashes from left to right over the fan.
I hold the power-button in until I see the first static logo, then let go of the power-button and hold the volume-key(s).
Is this the same stage in the boot-process that you were thinking of?
I have tried vol+, vol- and both vol+ and vol-, together with releasing the power-button at that point.
Have not had any success with that, and ended on the "desktop" each time.
AceDroidX: I tried your suggestion as well.
I did this:
1. Shut down the telephone
2. Plugged in the power.
3. A "fan"-logo appears which is replaced by an animated battery.
4. Upon seeing the animated battery, I tried the various key-hold variants.
- vol+ and power : Ended up at desktop.
- vol- and power : Ended up at desktop.
- vol+ and vol- and power : Ended up at desktop.
So not much success either.
I am out of ideas... Can it be that B522 bootloader that still lingers in there, not replaced by installing the B518 software?

Well, idk what else to suggest.. Maybe your problem is here?
Downloaded CWM Recovery 5.5.0.4 stable from xda and placed the file into the /.cust-backup/image folder via Remount.
Click to expand...
Click to collapse
I remember that when i mount my phone in linux, there was a partition with just the image folder. Some files like boot.img and recovery.img where there. Try to put the recovery image in there and see if it makes any difference.

I'd like see your versioninfo, can you upload a screenshot?
You can check mine from B528

AceDroidX: When I use Remount, I am able to mount that partition as read/write so that I can copy CWM's Recovery image in there. I think it is identical as mounting it up remotely, as you do. I am after all able to boot into CWM-Recovery, just not by key-pressing? I suppose I could boot into Linux and try to mount up the partitions as you do.
Hi kilroystyx: I can not figure out where to find a similar-looking page as the one you have in your picture.
I have the settings/about phone, if that is an older version of what you have there?

Treq01 said:
Hi kilroystyx: I can not figure out where to find a similar-looking page as the one you have in your picture.
I have the settings/about phone, if that is an older version of what you have there?
Click to expand...
Click to collapse
You have to dial *#*#2846579#*#*

Off.. I completely forgot about that place!
Here are the right screenshots.
What can you see from this?

Treq01 said:
Off.. I completely forgot about that place!
Here are the right screenshots.
What can you see from this?
Click to expand...
Click to collapse
Based on the screenshots your installation is fine.
Just one last shoot based on what AceDroidX says, with phone off press Vol+ and hold then connect USB cable to PC or charger and stay holding Vol+ then wait...wait and what you see?

hi all,
i'm using some ics roms and it seems ics supports natively vol++power button to take screenshots but it doesnt work for me... do you know if there are some custom ics rom where it will work?
thank you

Wow.. It is hard to believe.. but I have actually ... eventually found a way to get into that CWM-Recovery every time.
It is a combination of your suggestions.
I have been doing variations, trying to figure something out and eventually there is a method.
What I must do, on this phone, in order to get into CWM-R is this:
1. If the charging cable is in, then unplug first.
2. Turn the phone off.
3. Take out the battery and put it back in.
- This makes a difference on my phone, at least. I am not able to get into CWM-R wihtout taking the battery out first.
4. Press and hold Vol+
5. With Vol+ being pressed continously, insert the charging-cable.
6. Wait for the Fan-animation to finish and the "battery-charging" animation to start.
7. When the battery-charging animation is running and the screen eventually goes black, keep holding the Vol+ button for some time.
- Sometimes it works to keep holding the Vol+ button for only a second or two. Sometimes I must hold it up to 30 seconds.
7. Press and hold the power-button in addition to the Vol+
8. Wait for CWM-Recovery to start.
Thank you very much for your help.
Now I think I can try for ICS!

imsonica said:
hi all,
i'm using some ics roms and it seems ics supports natively vol++power button to take screenshots but it doesnt work for me... do you know if there are some custom ics rom where it will work?
thank you
Click to expand...
Click to collapse
Try Vol- and Power ON

(root) GT-i8190T

For all you GT-i8190T owners I have made a public folder in my drop box with all required files to root your phone reliably
http://db.tt/O7Gn5gHb
1 Unzip odin
2 Use three button combo to put your phone into download mode, (turn off completely , hold home, volume down, and power - for those that don't know) press up I think it is to confirm download mode.
3 with device connected to Odin flash the. MD5 file in the PDA section (do not tick repartition)
4 after reboot connect phone to pc and move the update superuser to your external SD can be done before to save time.
5 turn phone off again. And then go into recovery, home+volume up+ power hold until the first screen comes up.
6 flash the update super user from your external SD.... Important it's external SD..
7 reboot phone enjoy you rooted stock GT-i8190T
None of the files are hacked or cracked there as the developer CWM and chainfire made them if you want a full version of superuser pay for it and support the developer this version does everything you need anyway
Sent from my GT-I8190T using xda app-developers app