Related
Hello,
I try to Unbrick my A500 with Acer_A500_0.000.00_1.122.01_EMEA_GEN5_update.zip.
At the first time it works, I can boot and I want to flash the system.ing and boot.img for Acer_A500_1.141.07_COM_GEN1 with the Acer ROM Flasher to get german language support.
The HowTo in den Android-hilfe tells my that I will get an error after reboot (right) and than I have to flash another update (can´t post link because I´m a noobie)
Now I´m stick in a bootloaderloop (android logo) and nothing will help.
I try flash the unbrick update again, but the only thing I get is the Bootloop at the android logo.
I need some serious help for this.
Thanks guys
triebstahl
Doesn't sound like your getting into recovery with the update.zip. make sure you keep holding down the vol- button until you see the little green man. Don't let go of it when you see the big "Acer".
After doing the update.zip to unbrick, run itsmagice BEFORE running Acer Rom Flasher. Then flash the boot and system images from that thread. Then reboot after the 6 minute window. It should boot normally.
Or just stick to the instructions in the other thread... I think your just not getting into recovery correctly.
PS.. Acer Rom Flasher is going to get an update when I get the chance.
triebstahl said:
Hello,
Now I´m stick in a bootloaderloop (android logo) and nothing will help.
Click to expand...
Click to collapse
Have you already tried to wipe your device?
sc2k said:
Have you already tried to wipe your device?
Click to expand...
Click to collapse
this seems to be the solution. Thanks for your [TIP]
Well now I´m chinese, but I try the Acer_A500_0.000.00_1.122.01_EMEA_GEN5_update now.
Edit: It does work. Now I try the boot.img and system.img.
i had same problem
I had the same problem with that zip. It was corrupted. Found an other source update.acer.zip and it worked, but some chinese apps came with it. List few other thing. The update.acer.zip would hot boot. The zip had folder with an other update.acer.zip in it. After extracting the zip from the zip it worked.
triebstahl said:
Hello,
I try to Unbrick my A500 with Acer_A500_0.000.00_1.122.01_EMEA_GEN5_update.zip.
At the first time it works, I can boot and I want to flash the system.ing and boot.img for Acer_A500_1.141.07_COM_GEN1 with the Acer ROM Flasher to get german language support.
The HowTo in den Android-hilfe tells my that I will get an error after reboot (right) and than I have to flash another update (can´t post link because I´m a noobie)
Now I´m stick in a bootloaderloop (android logo) and nothing will help.
I try flash the unbrick update again, but the only thing I get is the Bootloop at the android logo.
I need some serious help for this.
Thanks guys
triebstahl
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1132760 try this
Greetings,
Quick history of the problem:
*I have a Defy, with stock rom, rooted, and TWRP 2.1. I have a full android backup with TWRP.
*I flash CM9-NIGHTLY-120716-Defy.zip. I reboot, everything is fine.
*I reboot into new CWM recovery, make another android backup with CWM.
*I install TWRP 2.1 again.
*I flash CM10-20120924-NIGHTLY-mb525.zip.
*But then, I immediately flash again TWRP 2.1 (I think that was a mistake).
*I reboot, CM10 works fine.
*But when trying to boot into recovery from (new) bootmenu, TWRP immediately crashes and phone reboots I have no recovery mode available.
*At this time, phone still boots into CM10 just fine.
*I spend many hours trying to find how to flash a proper recovery, but to no avail. In desperation, I then follow the same recovery install procedure I followed many time ago after rooting the phone (see for example "wiki.cyanogenmod.org/w/Install_CM_for_jordan"). So bootmenu 0.61 is installed.
*And now the phone always reboots into bootmenu 0.61; recovery cannot be accessed ("recovery.sh not found"); CM10 does not boot.
So the phone is (probably soft) bricked.
At this point, after reading different posts, the only solution I have in mind is to flash a stock sbf file. However, since most of my previous actions have resulted in worse and worse situation, I am not sure this is the best solution.
What would you advise?
Thank you,
Colinou
EDIT: after reading different posts, finally flashed stock rom with sbf file following tutorial in forums. No problem encountered, apart from starting over everything.
EDIT2: I now realise that the reason for always booting to bootmenu, was that bootmenu 0.61 was set to always boot to bootmenu! There is an option in the bootmenu to start phone to "default" instead of "bootmenu". Anyway, the recovery was still broken, so I needed to flash a SBF file anyway.
Help with SBF
ColinouRussie said:
Greetings,
Quick history of the problem:
*I have a Defy, with stock rom, rooted, and TWRP 2.1. I have a full android backup with TWRP.
*I flash CM9-NIGHTLY-120716-Defy.zip. I reboot, everything is fine.
*I reboot into new CWM recovery, make another android backup with CWM.
*I install TWRP 2.1 again.
*I flash CM10-20120924-NIGHTLY-mb525.zip.
*But then, I immediately flash again TWRP 2.1 (I think that was a mistake).
*I reboot, CM10 works fine.
*But when trying to boot into recovery from (new) bootmenu, TWRP immediately crashes and phone reboots I have no recovery mode available.
*At this time, phone still boots into CM10 just fine.
*I spend many hours trying to find how to flash a proper recovery, but to no avail. In desperation, I then follow the same recovery install procedure I followed many time ago after rooting the phone (see for example "wiki.cyanogenmod.org/w/Install_CM_for_jordan"). So bootmenu 0.61 is installed.
*And now the phone always reboots into bootmenu 0.61; recovery cannot be accessed ("recovery.sh not found"); CM10 does not boot.
So the phone is (probably soft) bricked.
At this point, after reading different posts, the only solution I have in mind is to flash a stock sbf file. However, since most of my previous actions have resulted in worse and worse situation, I am not sure this is the best solution.
What would you advise?
Thank you,
Colinou
EDIT: after reading different posts, finally flashed stock rom with sbf file following tutorial in forums. No problem encountered, apart from starting over everything.
EDIT2: I now realise that the reason for always booting to bootmenu, was that bootmenu 0.61 was set to always boot to bootmenu! There is an option in the bootmenu to start phone to "default" instead of "bootmenu". Anyway, the recovery was still broken, so I needed to flash a SBF file anyway.
Click to expand...
Click to collapse
Hi, can you please send a link for SBF, because I am having hard time searching.It seams that default link for SBF-s doesent work.
Thanks
Matija28 said:
Hi, can you please send a link for SBF, because I am having hard time searching.It seams that default link for SBF-s doesent work.
Thanks
Click to expand...
Click to collapse
Hi, Can you send me how to add twrp to stock sbf like which file will work from Motorola recovery menu or any apk ?
Hello,
Could you help me? The site sbf.droid-developers.org is offline. I need any retail sbf file to unbrick my defy mb526. Does anyone have a mirror for a stock rom of this device?
gabrielms26 said:
Hello,
Could you help me? The site sbf.droid-developers.org is offline. I need any retail sbf file to unbrick my defy mb526. Does anyone have a mirror for a stock rom of this device?
Click to expand...
Click to collapse
There is a link on quarx page,i used this to unbrick & root mine,if it helps ,i cannot post links so find it own.
Hai,
I don't remember where I downloaded the stock sbf file from, most likely from sbf.droid-developers.org, which is down now
However I kept a copy of the sbf file on my computer , it is a french retail version (but langage can be changed later), in case of desperate need, I can post it somewhere.
Nr
ColinouRussie said:
Hai,
I don't remember where I downloaded the stock sbf file from, most likely from sbf.droid-developers.org, which is down now
However I kept a copy of the sbf file on my computer , it is a french retail version (but langage can be changed later), in case of desperate need, I can post it somewhere.
Nr
Click to expand...
Click to collapse
I'm in need of an sbf file. I have a tmobile us defy will this work with it? my phone is in a bootloop. I searched high and low in this forum and on the internet all the links point to sbf.droid-developers.org or multiupload both are down. If anyone has any sbf files please upload them. thanks in advance.
axel2230 said:
I'm in need of an sbf file. I have a tmobile us defy will this work with it? my phone is in a bootloop. I searched high and low in this forum and on the internet all the links point to sbf.droid-developers.org or multiupload both are down. If anyone has any sbf files please upload them. thanks in advance.
Click to expand...
Click to collapse
I will send you a link by private message. I don't know if it will work with Tmobile, but at least you can boot your phone and flash another rom afterwards. At start it will ask you to login to motoblur, just cancel the requests, change language to english, and you're set.
Nr
defy stuck on CMR
hi guys i defy was stuck on boot it keeps on showing motorola logo then i think there is a problem i think i did a mistake that i nstalled Cynogen 7 and after using it for some time i again installed a back up from miui rom there i did a mistake and when iam on the recovery menu i cant select any option touchscreen is not working..pls help me guys
I installed the twrp 2.8.4.0 on my rooted G503H, but when i tried to install a custom rom, it shows: "error executing updater binary in zip" and says that the package is for g530h, and that my device is detected as HM2014811 (XIAOMI REDMI 2). I rooted the phone using the Mohan metod described here: http://forum.xda-developers.com/grand-prime/general/successfully-rooted-galaxy-grand-prime-t2935607
Thanks in advance for the help
edit: I reflashed stock and the twrp again but not rooted, yet i still have the same problem, unfortunately the TWRP.V2.8.4.0.tar.md5 is the only i found flashable in my galaxy prime, even the zip one didn't work
Same problem with me, anyone can help ?
zchronos said:
I installed the twrp 2.8.4.0 on my rooted G503H, but when i tried to install a custom rom, it shows: "error executing updater binary in zip" and says that the package is for g530h, and that my device is detected as HM2014811 (XIAOMI REDMI 2). I rooted the phone using the Mohan metod described here: http://forum.xda-developers.com/grand-prime/general/successfully-rooted-galaxy-grand-prime-t2935607
Thanks in advance for the help
edit: I reflashed stock and the twrp again but not rooted, yet i still have the same problem, unfortunately the TWRP.V2.8.4.0.tar.md5 is the only i found flashable in my galaxy prime, even the zip one didn't work
Click to expand...
Click to collapse
Instead using mohan root, you could actually use latest supersu flashable zip to get root, and there's twrp v2.8.7.0 on this grand prime subforum , you can get a guaranteed rooted device with no errors
---------- Post added at 11:24 AM ---------- Previous post was at 11:21 AM ----------
D.R-Ult.Googler said:
Instead using mohan root, you could actually use latest supersu flashable zip to get root, and there's twrp v2.8.7.0 on this grand prime subforum , you can get a guaranteed rooted device with no errors
Click to expand...
Click to collapse
Before doing my suggestion, flash stock firmware first then factory reset and wipe cache partition using stock recovery to avoid errors
zchronos said:
I installed the twrp 2.8.4.0 on my rooted G503H, but when i tried to install a custom rom, it shows: "error executing updater binary in zip" and says that the package is for g530h, and that my device is detected as HM2014811 (XIAOMI REDMI 2). I rooted the phone using the Mohan metod described here: http://forum.xda-developers.com/grand-prime/general/successfully-rooted-galaxy-grand-prime-t2935607
Thanks in advance for the help
edit: I reflashed stock and the twrp again but not rooted, yet i still have the same problem, unfortunately the TWRP.V2.8.4.0.tar.md5 is the only i found flashable in my galaxy prime, even the zip one didn't work
Click to expand...
Click to collapse
Step No 1:- First, download the TWRP Package (TWRP-SMG530H.tar), Odin tool (Odin v3.10.7) and SuperSU (SM-G530H-SuperSU-v2.46.zip) files on the desktop of your PC for Grand Prime.
Step No 2:- Copy/paste the SuperSU file to the internal storage of your device.
Step No 3:- Extract the TWRP file to get the file with .tar extension and Odin flashing tool also to get the Odin3_v3.10.7.exe file.
Step No 4:- Switch off the Galaxy Grand Prime in order to boot into the Download Mode.
Step No 5:- Switch on the device while pressing and holding Volume UP + Home + Power buttons at the same time. Once a warning screen with a yellow triangle sign appears, press the Volume Up button to enter into Download Mode.
Step No 6:- Run Odin as administrator on the PC.
Step No 7:- Connect the phone using its USB data cable with the PC.
Step No 8:- Once the Grand Prime is connected successfully with the PC, the ID:COM port will turn Blue on Odin and you’ll see “Added!!” message.
Step No 9:- Click on the AP button on Odin and locate the firmware file (TWRP-SMG530H.tar) that you have already extracted. Select it.
Step No 10:- Ensure that the Auto Reboot and F. Reset Time options are checked and the Re-Partition option should be unchecked.
Step No 11:- Begin the TWRP installation by clicking on the Start button in Odin. This process may take a few minutes.
Step No 12:- A PASS! message will be displayed on Odin after the TWRP installed successfully and the device will restart.
Step No 13:- Disconnect the device and turn it OFF to boot into TWRP recovery mode.
Step No 14:- Turn ON the phone by pressing and holding the Volume Up + Home + Power buttons altogether to boot into the TWRP recovery.
Step No 15:- Tap the Install button in TWRP and select the SM-G530H-SuperSU-v2.46.zip.
Step No 16:- After the installation is completed, reboot the system.
Links -
TWRP - http://www.4shared.com/file/XQAlhoclce/TWRP-SMG530H.html?
Super Su - http://www.4shared.com/zip/0vuOXMLvba/SM-G530H-SuperSU-v246.html?
Odin - http://www.androidblog.gs/download-odin-rom-flashing-tool-for-all-samsung-smartphones/
And install SAMSUNG USB DRIVERS on your PC before doing anything - http://www.mediafire.com/?8tigkfg2oczvguv
Good Luck.
Note : I'm not responsible for any kind of negative Issues. Do it on your own risk.
zchronos said:
I installed the twrp 2.8.4.0 on my rooted G503H, but when i tried to install a custom rom, it shows: "error executing updater binary in zip" and says that the package is for g530h, and that my device is detected as HM2014811 (XIAOMI REDMI 2). I rooted the phone using the Mohan metod described here: http://forum.xda-developers.com/grand-prime/general/successfully-rooted-galaxy-grand-prime-t2935607
Thanks in advance for the help
edit: I reflashed stock and the twrp again but not rooted, yet i still have the same problem, unfortunately the TWRP.V2.8.4.0.tar.md5 is the only i found flashable in my galaxy prime, even the zip one didn't work
Click to expand...
Click to collapse
same problem what should i do next , i dont have any stock rom for doing the same... pls help me the phone is rooted and the recovery is set ok
---------- Post added at 04:12 AM ---------- Previous post was at 03:57 AM ----------
ashrose said:
same problem what should i do next , i dont have any stock rom for doing the same... pls help me the phone is rooted and the recovery is set ok
Click to expand...
Click to collapse
i will tell u the actual incident happened:
My friend gave his galaxy grand prime with kitkat 4.4 and the built no SM-G530H to root it and install an custom os such as resurrection remix. I rooted the smartphone and installed recovery twrp recovery successfully and wiped out dalvik cache, data and internal storage which led to deletion of the OS from the system so whenever i reboot the phone stays in the initial boot where it shows the samsung logo so i downloaded custom roms from xda dev site XDA Member kn06497
Tweet Like +1
[ROM] [G530H] ResurrectionRemix 5.1.1 [STOPPED][STABLE][UPDATE][2016/09/29] , but none of the ROMS seems to work as the flashing was not possible as it gives the error message "error executing updater binary in zip" now what should i do now..
pls help me i m in great distress.
At least give me any rom which can be flashed successfully.:crying::crying:
flash stock with odin, and flash latest twrp ( 3.1.0.0 )
https://drive.google.com/open?id=1tGuu5Y6Qfo5baHjEO_-tJ3irXAXIWa53
Please make detaliled guide how to flash
rameezyp007 said:
Please make detaliled guide how to flash
Click to expand...
Click to collapse
you probably have a newer version of software than the one i posted, thats just to help to fix bricked phones .. dont flash if your phone is fine
Hi my friend i have chinese bac-00al phone i couldt install google play apps,, bootloader is unlocked and installed twrp,, what you offer to me?? Thanks
turkishboy07 said:
Hi my friend i have chinese bac-00al phone i couldt install google play apps,, bootloader is unlocked and installed twrp,, what you offer to me?? Thanks
Click to expand...
Click to collapse
Install GMS Core first:
http://www.qt6.com/app/com.huawei.gmsinstaller
then install google play
turkishboy07 said:
Hi my friend i have chinese bac-00al phone i couldt install google play apps,, bootloader is unlocked and installed twrp,, what you offer to me?? Thanks
Click to expand...
Click to collapse
install gms core
bejan89 said:
install gms core
Click to expand...
Click to collapse
i install all every thing not result,, what is wrong with this phone?? how can l downgrade system? i think on this system impossible install GAPPS
---------- Post added at 08:03 PM ---------- Previous post was at 08:00 PM ----------
jangale_asrar said:
Install GMS Core first:
http://www.qt6.com/app/com.huawei.gmsinstaller
then install google play
Click to expand...
Click to collapse
this is too not resut
Hello and thank you very much for this useful download link
During the rooting method, my phone (nova 2 plus) became soft brick!
I tried to solve it!
I've done following steps but they didn't work (with your full rom - was linked):
1.
1.1. extract .zip file with winrar
1.2. extract update.app file using HuaweiUpdateExtractor
1.3. Put all extracted file to sd-card
1.4. power+volume up + volume down to update it but after 5 percent, appears "update fail"
2.
2.1. extract .zip file with winrar
2.2. extract update.app file using HuaweiUpdateExtractor
2.3. Flash the rom via fastboot (it completed successfully without any errors but phone reboot loop till huawei logo)
Now my questions:
1. The extracted file doesn't have "cust.img" is it OK or it should have it?
2. What can I do to solve my problem? (I've access fastboot and custom recovery)
Thanks for your patience and your answering.
Hi i have nova 2 plus bac-l21c185 and after wipe system my mobile never boots and always show error when trying to setup update.zip by twrp so please tell me if this rom will help me and able to setup correctly , if not ! So any idea will be useful .
engineer.sy said:
Hi i have nova 2 plus bac-l21c185 and after wipe system my mobile never boots and always show error when trying to setup update.zip by twrp so please tell me if this rom will help me and able to setup correctly , if not ! So any idea will be useful .
Click to expand...
Click to collapse
Well.. If u wipedbsystem thats mean there is no system files in your mobile...
There is 2bways tonsolve this
1.send it to repair it will cost you money.
2. The way i used.
A. Download a full firmware its in here someone shared it.
B.u need at least 8 giga sdcard and formated.
D. Move firmware to sdcard and reboot to huawei recovery.
E. Everything in your mobile will be wiped and restored to stuck
Hope your problem will be solved
hosbh said:
hello and thank you very much for this useful download link
during the rooting method, my phone (nova 2 plus) became soft brick!
I tried to solve it!
I've done following steps but they didn't work (with your full rom - was linked):
1.
1.1. Extract .zip file with winrar
1.2. Extract update.app file using huaweiupdateextractor
1.3. Put all extracted file to sd-card
1.4. Power+volume up + volume down to update it but after 5 percent, appears "update fail"
2.
2.1. Extract .zip file with winrar
2.2. Extract update.app file using huaweiupdateextractor
2.3. Flash the rom via fastboot (it completed successfully without any errors but phone reboot loop till huawei logo)
now my questions:
1. The extracted file doesn't have "cust.img" is it ok or it should have it?
2. What can i do to solve my problem? (i've access fastboot and custom recovery)
thanks for your patience and your answering.
Click to expand...
Click to collapse
dont extract update.app , just make dload folder in your sd card and put update.app in it .
Hi guys, am new here and to the whole custom rom thing too. I found this page by anand more on installing a custom rom
https://forum.xda-developers.com/redmi-2/how-to/ultimate-guide-redmi-2-users-rooting-to-t3294212
The problem is after making stock recovery when i follow this step..tap on recovery image and by "Choose the file" menu locate the .img file you want to flash.. i cannot locate any .img files anywhere. Tried to install a recovery.img file online and flashify could not detect that either. Please help me on how to proceed and if there is a post with newer/simpler way to do this please provide the link.