Related
Hello all!
So I have a qtek 9100 and tried to flash with "ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe", the installer started, the wizard was showing me the white screen and progress bar, sudently I get an eror message from pc, and guided to repair the erors. Meanwhile my phone gone off, and now it does not want to open, i tried hard reset, but seems nothing is bringing it back to life. I measured the battery and my voltmeter shows 3.8V, so i guess the battery is ok. I tried removing the battery and putting it back on but it doesn't turn on.If plug it in the wall charger, it doesn't lite up the charging led.
I'm kind of swetting...what can I do now?
try to take the battery off and wait in 10 minutes before you place it in.. try to on it after that.. that might help.. have heard it has helped many here in this forum.. either your bricked it or not.. 10 minutes will or might show..
Thanks for the quick answer, i'm waiting now to see if it works.
Any other tips are welcome.
no...no result...it still doesn't go on
Is there no way to Jtag one of these phones?
Sorry...what "Jtag" means?
Is there any chance that when i tried to flash my ROM to burn my battery?
I charged my phone before I went to bed last night and then left it unplugged (not charging) when I went up stairs to sleep. When I woke up this morning my phone was off, so I tried turning it on and I kept getting 3 blinking red lights on the power button. I tried it several times and it wouldn't turn on, just blinked at me. So I held the button down for about 10 seconds, after about 3 or 4 more of the 3X blinking red lights I get no response. Just that dead feeling you get when one of your electronics no longer works.
So I go down stairs and plug it in to charge and leave it for a bit, a while later I was able to turn it on. Found the battery at 2%, thought that was odd since I was at 100% when I went to bed and had the screen off all night (to my knowledge).
Is the blinking red light serious or does it just mean "your battery is so low your phone can't turn on"?
If the light blinks red it can mean several things. In your case it is not serious, i had this problem myself and i have searched for it, i found threads of people having the same issue and their phone came back to life after a few hours of charging.
So actually its just the battery being dead, it needs more charging even too show the charging progress screen lol.
In my experience the light also blinks red when you flash a firmware version of the xperia arc on your xperia play (lol XD).
The blinking red lights are an indication that your phone battery is drained and needs to be charged before the phone can switch on. There's nothing wrong with your phone.
thanks for the reassurance guys
rveens said:
If the light blinks red it can mean several things. In your case it is not serious, i had this problem myself and i have searched for it, i found threads of people having the same issue and their phone came back to life after a few hours of charging.
So actually its just the battery being dead, it needs more charging even too show the charging progress screen lol.
In my experience the light also blinks red when you flash a firmware version of the xperia arc on your xperia play (lol XD).
Click to expand...
Click to collapse
I was using flashtool to flash the official firmware and then BAM! my phone died, so I then tried to turn it back on and it wouldnt, I also tryed to put the phone into flashmode so I can re flash it but still nothing, my play comes up as an unrecognised device on the PC
anyone able to help
NevErSn0w said:
I was using flashtool to flash the official firmware and then BAM! my phone died, so I then tried to turn it back on and it wouldnt, I also tryed to put the phone into flashmode so I can re flash it but still nothing, my play comes up as an unrecognised device on the PC
anyone able to help
Click to expand...
Click to collapse
please check post dates before bumping
Sent from my R800i using Tapatalk 2
same happend to me after flash, any idea to fix my old ultra z? I need it for testing an old app
Hiho,
go to the problem:
I changed the original rom to CyanogenMod (NIGHTLY EUROSKANK [21/12/12]). used one month, until one day I was playing, and the battery was low, so I left him there, went to sleep. I woke up, and he was discharged and placed in wall charger, and went to watch. some hours later, I tried to turn on, and nothing happened, I thought I plugged the charger in the wrong way, I put to charge again, and noticed that out instead of white LED appears, was the red led. Loading left for some hours, I turn on and nothing happened .. (@! #! @ # $) And then plugged in the USB, and lit the white LED, and could not access it.
I did the MacGyver method, to bootloader battery, and did SBF flash:
" JDGC_U6_2.12.0_SIGNED_USAJRDNPRCB1B50AA039.0R_JORDANGCCORE_P013_A033_HWp3_Service1FF.sbf ", was all right for some time, when I put it to charge and lit the red light again, and then pulled the plug, and he hung up. and is now well. and no more MacGyver mode solves the bootloader
Please help
Sorry for the horrible english, I'm using google translate.:silly:
And also the huge text (I would explain how it happened)
can someone help?
cosaki said:
Hiho,
go to the problem:
I changed the original rom to CyanogenMod (NIGHTLY EUROSKANK [21/12/12]). used one month, until one day I was playing, and the battery was low, so I left him there, went to sleep. I woke up, and he was discharged and placed in wall charger, and went to watch. some hours later, I tried to turn on, and nothing happened, I thought I plugged the charger in the wrong way, I put to charge again, and noticed that out instead of white LED appears, was the red led. Loading left for some hours, I turn on and nothing happened .. (@! #! @ # $) And then plugged in the USB, and lit the white LED, and could not access it.
I did the MacGyver method, to bootloader battery, and did SBF flash:
" JDGC_U6_2.12.0_SIGNED_USAJRDNPRCB1B50AA039.0R_JORDANGCCORE_P013_A033_HWp3_Service1FF.sbf ", was all right for some time, when I put it to charge and lit the red light again, and then pulled the plug, and he hung up. and is now well. and no more MacGyver mode solves the bootloader
Please help
Sorry for the horrible english, I'm using google translate.:silly:
And also the huge text (I would explain how it happened)
Click to expand...
Click to collapse
Hi,
Sorry but in case you don't know, when the phone is discharged (under 7 or 10%) and when we plug it, it's normal to have red led. But you must have the "battery charging animation" with percentage when it charges... When it's charged enough (above 7 or 10 %) you can turn on the phone (power button long press).
Your battery could be dead, yes... But :
How old is your battery ?
Have you checked your wall charger ?
Is your USB cable charges your battery ?
Is your battery charges well with your original SBF (without CM) ?
If you know someone else who owns a Defy, you could test with his battery and his wall charger....
Your USB connector could be damaged....
Need some more informations to help you....
@fpriot said:
Hi,
Sorry but in case you don't know, when the phone is discharged (under 7 or 10%) and when we plug it, it's normal to have red led. But you must have the "battery charging animation" with percentage when it charges... When it's charged enough (above 7 or 10 %) you can turn on the phone (power button long press).
Your battery could be dead, yes... But :
How old is your battery ?
Have you checked your wall charger ?
Is your USB cable charges your battery ?
Is your battery charges well with your original SBF (without CM) ?
If you know someone else who owns a Defy, you could test with his battery and his wall charger....
Your USB connector could be damaged....
Need some more informations to help you....
Click to expand...
Click to collapse
the cell completed one year this month (January / 13). I know that when the led is red because it is very low on battery. But let Loading 4 hours +. and when I connect to the computer it does not charge. it only illuminates the white LED, and can not connect or power on. anyway, the exchange led to suppose that shows the usb part is okay. I've used various chargers.
I can not run the SBF, why he does not recognize.
The phone is not turning on. apparently only led.
Re: Defy Battery dead?!
cosaki said:
the cell completed one year this month (January / 13). I know that when the led is red because it is very low on battery. But let Loading 4 hours +. and when I connect to the computer it does not charge. it only illuminates the white LED, and can not connect or power on. anyway, the exchange led to suppose that shows the usb part is okay. I've used various chargers.
I can not run the SBF, why he does not recognize.
The phone is not turning on. apparently only led.
Click to expand...
Click to collapse
Try another battery... Your system could be corrupted, I mean, it seems your phone can't charge in 0-7 % step, so it will never boot... Dunno why, it could be an issue even if I don't really think so... But, to save your phone it's the better thing you can do. Couldn't you borrow someone's Defy battery ? A friend ? A shop ? Then you could test !
Sent from my Defy MB525 green lens
@fpriot said:
Try another battery... Your system could be corrupted, I mean, it seems your phone can't charge in 0-7 % step, so it will never boot... Dunno why, it could be an issue even if I don't really think so... But, to save your phone it's the better thing you can do. Couldn't you borrow someone's Defy battery ? A friend ? A shop ? Then you could test !
Sent from my Defy MB525 green lens
Click to expand...
Click to collapse
I got a battery from a friend, who possesses defy red lens, same as mine.
nothing. still does not power on.
cosaki said:
I got a battery from a friend, who possesses defy red lens, same as mine.
nothing. still does not power on.
Click to expand...
Click to collapse
OK
Did you try to unbrick your phone with this thread ?
@fpriot said:
OK
Did you try to unbrick your phone with this thread ?
Click to expand...
Click to collapse
I can not because the phone only comes in the boot when it is plugged into the wall charger. when I connect usb, it only illuminates the white LED. and I can not get into the boot or do anything.
cosaki said:
I can not because the phone only comes in the boot when it is plugged into the wall charger. when I connect usb, it only illuminates the white LED. and I can not get into the boot or do anything.
Click to expand...
Click to collapse
Are you sure you can't do any of these two steps (3 or 4) of the "bricked defy Step by Step Walkthrough" thread ??
Even the 4th ?
[...
3.First shutdown your phone, hold the Vol down and boot the phone up keeping the volume down pressed. you should come up to a triangle android logo, press the vol up and down key and then tap the screen ( this is a touch screen gui), choose the wipe data/cache and press ok, this should take up to 5 minutes.
4. Now, shut down the phone (pull the battery out and return it back in), Hold the Vol Up button and power up your phone.
you will enter the Bootloader (or BL as its called in the forums) and you should see the phone stating that (usually 9.10 version)
...]
If not, even with a charged battery, I 'm afraid your defy has a hardware issue...
Is your power button still alive ?
@fpriot said:
Are you sure you can't do any of these two steps (3 or 4) of the "bricked defy Step by Step Walkthrough" thread ??
Even the 4th ?
[...
3.First shutdown your phone, hold the Vol down and boot the phone up keeping the volume down pressed. you should come up to a triangle android logo, press the vol up and down key and then tap the screen ( this is a touch screen gui), choose the wipe data/cache and press ok, this should take up to 5 minutes.
4. Now, shut down the phone (pull the battery out and return it back in), Hold the Vol Up button and power up your phone.
you will enter the Bootloader (or BL as its called in the forums) and you should see the phone stating that (usually 9.10 version)
...]
If not, even with a charged battery, I 'm afraid your defy has a hardware issue...
Is your power button still alive ?
Click to expand...
Click to collapse
Power it on, when connected to wall charger. sometimes starts, sometimes they're showing is charging (the battery symbol with percentage in the middle). but I just pull it off. ie power on it, just in wall charger.
if a hardware problem it would not mind at all. (I think)
cosaki said:
Power it on, when connected to wall charger. sometimes starts, sometimes they're showing is charging (the battery symbol with percentage in the middle). but I just pull it off. ie power on it, just in wall charger.
if a hardware problem it would not mind at all. (I think)
Click to expand...
Click to collapse
Sorry but I can't help you anymore. Don't have more ideas...
Hope you will find the culprit...
See you
@fpriot said:
Sorry but I can't help you anymore. Don't have more ideas...
Hope you will find the culprit...
See you
Click to expand...
Click to collapse
Thank you for your attention. I hope someone can help me!
thks a lot
anyone who can help me?
Hi all,
My Nexus 4 just shut down after going really hot. I cannot turn it on anymore, when I press the On/Off button with our without the volume buttons nothing happens, except if it is plugged in.
In that case, after about 15 sec I have a blinking red led.
I think the problem is material, but I don't know if the problem comes from the battery or something else. I don't want to buy a new battery if my Nexus 4 is dead... So I am trying to figure out if the problem is about the battery or not. I think not because even when plugged in, nothing shows on the screen when I try to turn it on.
What do you think ?
Thanks very much for your help,
Guillaume.
blinking red led
GrIc said:
Hi all,
My Nexus 4 just shut down after going really hot. I cannot turn it on anymore, when I press the On/Off button with our without the volume buttons nothing happens, except if it is plugged in.
In that case, after about 15 sec I have a blinking red led.
I think the problem is material, but I don't know if the problem comes from the battery or something else. I don't want to buy a new battery if my Nexus 4 is dead... So I am trying to figure out if the problem is about the battery or not. I think not because even when plugged in, nothing shows on the screen when I try to turn it on.
What do you think ?
Thanks very much for your help,
Guillaume.
Click to expand...
Click to collapse
When you get the blinking red led while on the charger, how many time does it flashes ?
Is it the same as this:
"
By red flashing light, I mean: Hold power for 12 secs with good charger connected gives flashing red light: one short, pause circa 2 sec, 11 flashes at one per sec, pause under 1/4 sec, one short dim flash, pause c. 2 sec, repeat. This is the notification LED directly above the USB socket.
"
cxda48 said:
When you get the blinking red led while on the charger, how many time does it flashes ?
Is it the same as this:
"
By red flashing light, I mean: Hold power for 12 secs with good charger connected gives flashing red light: one short, pause circa 2 sec, 11 flashes at one per sec, pause under 1/4 sec, one short dim flash, pause c. 2 sec, repeat. This is the notification LED directly above the USB socket.
"
Click to expand...
Click to collapse
Hi cxda48,
I have the exact same behaviour : 11 flashes, a short pause followed with one short flash, then repeat.
You have an idea of what it means ?
Thanks !
I had a similar problem. The phone will not start and when you put the red light blinking loaded several times. My Solving: I opened the phone and pulled the battery pins. I connected the battery and the phone started normally.
anetgrup said:
I had a similar problem. The phone will not start and when you put the red light blinking loaded several times. My Solving: I opened the phone and pulled the battery pins. I connected the battery and the phone started normally.
Click to expand...
Click to collapse
*similar* but not the same I guess.
It seems like the IC that turns on and off the LED is the PMIC ("Power Management Integrated Circuit"). When something goes wrong, this IC has got some intelligence to give out some information about what is wrong (a bit like the bios on a PC). So 11 red LED flashes is an error code I guess. When the battery is disconnected it's 1 red LED flash (that error code probably means battery not present/worng) in my experience.
I know at least that with the 11 flashes issue, changing / reconnecting a charged battery does not solve this issue
Would anyone have information about what these codes mean ?
this just happened to me. Any solutions?
jimmy2823 said:
this just happened to me. Any solutions?
Click to expand...
Click to collapse
I thought I should give some feedback on how I sorted out this problem:
After discussion with google after-sales, I sent it for repair to the official LG repair contractor in the UK (SBE Ltd, based in Ashford, UK).
I precisely chose to go through LG repair rather than google because google warned me they would replace the nexus4 so I would
1) loose my data
2) get a potentially worse phone(refurbished) than mine (which is really mint with outstanding battery life)
I sent the phone with instructions on what I think needed done : replacement of the PMIC and *not* a swap of motherboard. When the nexus4 was back, I noticed they ignored my message & swapped the motherboard .
They kept my housing but they also swapped the battery(was not required) and now the battery life is very poor ! I am still in communication with LG regarding the battery issue
Hello.
When I try to turn on my N4, I hold power button, and after about 10 seconds Red light blinks (just once, if it's connected to USB that 1 blink last for 3 seconds, if connected to wall, it's just quick 1 blink. If it not connected anywhere there is no action at all, it just stays dead, no blinks, nothing). Same if I try to go in bootloader by holding volume down+power.
This happened after I successfully installed CM12, with no errors. Then I rebooted my phone, and it just stayed black as it is now. Battery was around 25~30% that time, and phone was connected to USB.
Did I bricked my phone totally? I am now trying to charge it up already for 1 hour... but it nothing changes.
I have searched here for similar problems, but couldn't find solution...
Edit: Charging already for 10h+ , still same..
Edit2: I removed battery, reconnected after a while, still same problem.
So I tested it with multimeter, it says 2.6V, but fully charged must be 3.8V. Could this be a problem? I was charging it for whole night.
Edit3: I just got new battery . But it looks the same.. phone doesn't boot up.. same red light blinks once.. so.. its my phone is dead? I can't believe that...
When I connect to PC usb, there are unrecognized deviced called "QHSUSB_DLOAD".
easy fix
Hold down the power button and the volume down button at the same time until phone reboots. If you see the little android no need to worry just let go and wait for your device to reboot on its own. This is not a factory reset it's just like restarting your device. :good:
zelexon said:
Hold down the power button and the volume down button at the same time until phone reboots. If you see the little android no need to worry just let go and wait for your device to reboot on its own. This is not a factory reset it's just like restarting your device. :good:
Click to expand...
Click to collapse
I have tried that many times. Nothing. It's bootloader screen, but I can't get there. Nothing happens. If I keep holding volume down+power it just keep blinking once every ~10 seconds, same if I hold just power button. If phone is not connected to charger, there are no blinks at all.
I removed battery, reconnected after a while, still same problem.
So I tested it with multimeter, it says 2.6V, but fully charged must be 3.8V. Could this be a problem? I was charging it for whole night.
Cracken6 said:
I removed battery, reconnected after a while, still same problem.
So I tested it with multimeter, it says 2.6V, but fully charged must be 3.8V. Could this be a problem? I was charging it for whole night.
Click to expand...
Click to collapse
I had the same problem a year ago, I tried to remove the battery, charging all night, and other solutions that I found online and no one worked.
Finally I found here in XDA a user with the same problem and his solution was charger the phone with a wireless charger, a friend of mine has one and I put the phone to charge and after a few minutes the screen goes on and the phone was charged, then I press power button and the nexus run again.
Hope this works.
Sorry for my bad English, I'm from Spain.
Good luck.
(I bought a wireless charger in case it happen again)
I don't know anyone with wireless charger. I already ordered a new battery, and then I probably will get wireless charger also. Ty.
But this problem is very weird if you think so.. I think it happened because of many aspects together:
1) Battery was already below 30%
2) I pretty regularly charge phone with USB (won't do it again)
3) It was connected to PC USB in same time.
4) I installed CM12 ROM in same time
So main reason I think is USB, that I restarted phone while it was on pretty low battery and with USB connected.. phone restarted and got invalid voltages and couldn't even boot up or charge phone. I also found an article which says, minimum voltage, when phone battery has 0%, it's 3.0V, so I was below that.. it just screwed everything and battery died. Well, I am not sure for 100% that it's battery fault, but I hope so, I really love my N4 and still wanna use it for long time, I hope it's not dead phone, just a dead battery. Lets see! I will update this thread , when I get my new battery (less than month probably).
Sorry, my english is also not perfect. I am from Latvia.
I was playing when it happened to me. The phone was very very hot and the battery was around 70%. When I put in the wireless charged and I can reboot the phone the battery was at 65%, so it had charge but the phone won't boot.
I charge my phone almost every day, sometimes with AC, others with USB (plugging to PC) or wireless that depends of my needs
I hope you can fix it. Good luck.
Btw. Do you know if battery charges with wireless charger, if it's removed from the phone?
Don't think it does, since the receiving coils for wireless charging are located just behind the glass back.
Flipz77 said:
Don't think it does, since the receiving coils for wireless charging are located just behind the glass back.
Click to expand...
Click to collapse
The battery will charge with a NCF Charger
Major Issue Google
This "Nexus SOD" issue is showing up on many sites across the Internet. I have multiple "Nexus" devices including 2 Nexus 4, 1 Nexus 5, 2 "Nexus 7 2013". It suddenly started out of the blue with one of my Nexus 4 phones. Symptoms included rapid battery discharge. I am using Lollipop 5.1 on all devices. There are many claims as to the cause, Hardware Motherboard, Power Button etc. Others claim it is "Software Related" or App Related. The problem effects Nexus 4 and Nexus 5 phones. I have ordered a new motherboard for my nexus 4 device and see if that makes a difference.
This problem should warrant a "Major Android Lollipop Crisis Team" by Google to investigate the cause and let us know what it is and what Google is doing to solve the problem before moving to announce "Android M". This issue needs to brought up and actively pursued at the upcoming "Google I/O Conference" by the strong Android Developers Groups to press for "Formal Action"
charging method
Cracken6 said:
I have tried that many times. Nothing. It's bootloader screen, but I can't get there. Nothing happens. If I keep holding volume down+power it just keep blinking once every ~10 seconds, same if I hold just power button. If phone is not connected to charger, there are no blinks at all.
Click to expand...
Click to collapse
I had this problem a long time ago and my fix worked for me after doing a little research it seems like this is a case called battery total discharge. The fix was simply to charge your phone using the wall adapter that came with your phone (I still use my old apple cube wall thing) and to wait for the red light to appear then wait about ten minutes before trying to reboot.
I just got new battery . But it looks the same.. phone doesn't boot up.. same red light blinks once.. so.. its my phone is dead? I can't believe that...
When I connect to PC usb, there are unrecognized deviced called "QHSUSB_DLOAD".
Maybe this video will help you: Oh I´m not allowed to post links until now.
Just search for: - Nexus 4 "red light of death" fix - at youtube.
Hope it will help
AndRe5575 said:
Maybe this video will help you: Oh I´m not allowed to post links until now.
Just search for: - Nexus 4 "red light of death" fix - at youtube.
Hope it will help
Click to expand...
Click to collapse
I have checked all kind of videos there. Also that one. Most of these cases are related to battery, but it seems in my case it isn't. I just searched for QHSUSB_DLOAD unrecognized device, all posts says it means phone is bricked... But cmon, how? I installed CM12, successfully, without any errors, then just restarted phone, and its dead...
Cracken6 said:
I have checked all kind of videos there. Also that one. Most of these cases are related to battery, but it seems in my case it isn't. I just searched for QHSUSB_DLOAD unrecognized device, all posts says it means phone is bricked... But cmon, how? I installed CM12, successfully, without any errors, then just restarted phone, and its dead...
Click to expand...
Click to collapse
Did u try booting the phone without battery by connecting to wall charger and what about flashing stock ROM via PC
Also check that the power button works
This case should be solved
as9333 said:
Did u try booting the phone without battery by connecting to wall charger and what about flashing stock ROM via PC
Also check that the power button works
This case should be solved
Click to expand...
Click to collapse
Just tried booting without battery, and connecting to wall. Same - red light blinks once, after I hold Power button or Power+Volume down for about 15 seconds. If I keep buttons pressed, it just repeats every ~15 seconds.
Power buttons works fine.
After I checked that Device manager thing in google.. it looks very bad.. phone is dead.. probably need to change motherboard. I am just shocked, how this could happen... I didn't receive any errors during CM12 installation. Phone just instantly died after restart.