I have a problem with my IMate JASJAM. The camera app sometime behave weird and shows scrambled. After several reboots, it goes to normal. This has happened several times. I have tried hard reseting but so far no luck. The issues remains.
I am using the latest ROM version for IMATE JASJAM.
Any suggestions?
I have the T-Mobile varioII for only a few days.
The camera screen is displaying a line in the same position of the line just above the battery icon in the today screen. This seems to affect the use of the ok icon and button, in that it won't consistently save the settings. The line does disappear, but as soon as I use any buttons, it comes back.
Soft reset sometimes removes it until it reappears.
Do you have anything similar to this, or anyone comment please?
sorry, can't help there but here's my own camera problem:
After having to send back 3 tytns with screen alignment issues my 4th handset's screen works perfectly however on all 4 units the camera is crashing frequently, or sometimes just taking a blank, grey picture. I obviously want my camera set to best quality: 2m, superfine. When i take a pic where the light is good (mainly outside on a nice day) the tytn just switches to the today screen. If i try to access the camera app I get a "camera in use" error message, if i go to the running apps screen the camera app is not there to close, only solution is a soft reset, take a pic and it happens again.
The only workaround I have found is to set the camera to L, fine quality but i'm not happy with this - why have a 2mp camera that only works when it is dumbed down?
Surely i'm not the only one with this problem as all 4 sets had the same issue.
I'm loathe to send this one back in case the 5th set has the screen issue.
I faced the issue that my camera screen show scramble. And when I take the picture, the phone returns to the today screen, and when I tried to start the camera again, it gives me an error that the camera is already in use.
My problem of the camera having a line on the screen may not be the screen.
The line is appearing in the captured image. I didn't realise this until I rotated the image. So, it may be the camera/lens at fault.
I had the identical camera fault as described in the original post. Soft resets cleared the screen but the fault re-appeared after activating the camera. I had to pester the network into replacing my 1 mth old voda version. I have to admint the fault only started after I dropped the handset though.
lol well might as well add mine, my zoom doesnt work! Just will not shift from 1x
Schooleydoo, you know there is no zoom at 2 mp. It only works at lower resolutions and in increasing amounts the lower you set it..
Any solutions??
Hi,
Has any of you found the solution to the original problem? My phone's camera shows scrambled screen continuously and doesn't get back to normal.
Any ideas??
Regards,
Saurabh
I have a scrambled screen too. It started when i was too low with memory, after 3rd warning phone turned off itself 3 times - it never happened before, some of the programms crashed for good, and camera shows camera menu but picture that camera sees is scrambled, so are the pictures taken. When I tried to take a video it showed that I am missing some codecs. After Flashing I can record videos and make pictures, but I get only this results...
:/ .... anybody have an idea?
I don't know what exactly happened... I flashed phone with the same WM6 and installed Webcamera plus v1.051, and TCPMP v 0.72 RC and camera still wasn't working, then suddenly it started to work a day after .. i don't know if it will help anybody, but.... i think that some codecs from those programs in some way overwrited phone codecs...but I am a new, so I may be wrong
Hi all,
I've dropped my Nexus 4 into water for a second, and few months later it still works fine - except the rear camera. It flickers, randomly chrashes and gets crazy. Some times I manage to take several photos before it goes nuts. Front camera works fine!
I tried flashing clean rom etc. - problem persists, obviously it's not sw issue.
So I ordered replacement module. I installed it immediately and now my camera just force closes. There is no way to open camera app. I tried reinstaling camera app, clean flash etc., everything I could do from software side.
My old camera module works like before so I reverted the change.
Does anyone have experience with changing camera module? Any advice? Broken camera maybe?
I don't know if I dropped my ze551kl too many times or something happened while flashing, but the back camera does not work at all now. When I launch the pixel camera or any camera app, it launches the front camera. The led flashlight no longer works either. Can anyone offer any suggestions to troubleshoot or is this a hardware problem that is probably unfixable?
I've recently found out that my primary camera has a focus problem and it's unusable at the moment. It doesn't focus even if I'm trying to do it in manual mode. The focus is stuck at a small distance. I'm not using the camera that much, so I don't really know when this happened. Last week I've gone to a party and I've dropped the phone by accident on tiles, but it has a silicone case and it looks as flawless as ever, not even a scratch. Could this be the problem and is there any way of solving this without sending it to a service?
Note: I still have warranty so if the phone looks flawless do you think it will cover it?
Note 2: Camera lenses are not scratched or broken.
hey
i got the OnePlus 8 pro IN2020 model
and suddenly my rear camera stopped working and when i opened it, it shows just white screen.
my front camera works fine and my zoom camera sometimes working and sometimes showing the same white screen.
my main camera and ultra zoom dont work for a week.
what can cause this? the phone never fell or got damaged.
I had this on a custom ROM but not stock.
Clear data from the camera, switch between all lenses, if that fails then back up and wipe your phone and start over.
Personally I'd MSM (again you will need to back up)