I have a problem with my IMate JASJAM. The camera app sometime behave weird and shows scrambled. After several reboots, it goes to normal. This has happened several times. I have tried hard reseting but so far no luck. The issues remains.
I am using the latest ROM version for IMATE JASJAM.
Any suggestions?
I have the T-Mobile varioII for only a few days.
The camera screen is displaying a line in the same position of the line just above the battery icon in the today screen. This seems to affect the use of the ok icon and button, in that it won't consistently save the settings. The line does disappear, but as soon as I use any buttons, it comes back.
Soft reset sometimes removes it until it reappears.
Do you have anything similar to this, or anyone comment please?
sorry, can't help there but here's my own camera problem:
After having to send back 3 tytns with screen alignment issues my 4th handset's screen works perfectly however on all 4 units the camera is crashing frequently, or sometimes just taking a blank, grey picture. I obviously want my camera set to best quality: 2m, superfine. When i take a pic where the light is good (mainly outside on a nice day) the tytn just switches to the today screen. If i try to access the camera app I get a "camera in use" error message, if i go to the running apps screen the camera app is not there to close, only solution is a soft reset, take a pic and it happens again.
The only workaround I have found is to set the camera to L, fine quality but i'm not happy with this - why have a 2mp camera that only works when it is dumbed down?
Surely i'm not the only one with this problem as all 4 sets had the same issue.
I'm loathe to send this one back in case the 5th set has the screen issue.
I faced the issue that my camera screen show scramble. And when I take the picture, the phone returns to the today screen, and when I tried to start the camera again, it gives me an error that the camera is already in use.
My problem of the camera having a line on the screen may not be the screen.
The line is appearing in the captured image. I didn't realise this until I rotated the image. So, it may be the camera/lens at fault.
I had the identical camera fault as described in the original post. Soft resets cleared the screen but the fault re-appeared after activating the camera. I had to pester the network into replacing my 1 mth old voda version. I have to admint the fault only started after I dropped the handset though.
lol well might as well add mine, my zoom doesnt work! Just will not shift from 1x
Schooleydoo, you know there is no zoom at 2 mp. It only works at lower resolutions and in increasing amounts the lower you set it..
Any solutions??
Hi,
Has any of you found the solution to the original problem? My phone's camera shows scrambled screen continuously and doesn't get back to normal.
Any ideas??
Regards,
Saurabh
I have a scrambled screen too. It started when i was too low with memory, after 3rd warning phone turned off itself 3 times - it never happened before, some of the programms crashed for good, and camera shows camera menu but picture that camera sees is scrambled, so are the pictures taken. When I tried to take a video it showed that I am missing some codecs. After Flashing I can record videos and make pictures, but I get only this results...
:/ .... anybody have an idea?
I don't know what exactly happened... I flashed phone with the same WM6 and installed Webcamera plus v1.051, and TCPMP v 0.72 RC and camera still wasn't working, then suddenly it started to work a day after .. i don't know if it will help anybody, but.... i think that some codecs from those programs in some way overwrited phone codecs...but I am a new, so I may be wrong
I'm on Roachs Prime 2.2 Rom, oc`d to 1.4 and everything has been moving just fine. Today for the heck of it I opened my camera app and it just showed just black on the screen. All controls were visible but not what I was aiming app. However I snapped a picture anyways and it came out just fine, but in the viewing mode and switching to the front and the video camera mode the viewing screen was black. Anyone run into this?????
Thank you.
So when I first installed it both cameras worked, and I could switch between. I perhaps recall an update, and now switching to the rear camera just results in a black screen.
Anybody else?
I found the back camera only works after I have gone full screen,
Hello!
I just bought G900F and i noticed that Autobrightness isnt working correctly, even after factory reset, it does go up when in sunlight but doesnt go back down when i go inside the house, the screen remains at full brightness... until i click autobrightness off and on again or turn screen off for a short while.
Is this normal or what? sensor is working correctly in service menu -> sensors - it goes up and down as it should be. So is this samsung touchwiz problem or "new" feature? :/
Also ive noticed that camera lens sometimes get stuck and i cant get a fix on far objects (like permanent macro mode) :/ when i hit camera lens with my finger it goes normal at instance and i can take picture... i dont know if i should go already for the warranty or wait few days and it will go away on its own :/ also when i shake my phone forward and backwards i hear clicking from camera - loose lens? :/
Damn it i already sold my S4 so i have no phone for temporary use while i send S5 to repair...
Hi, I have the exact same camera focus problem. I can focus on close objects fine but a lot of the time it just doesn't focus at a distance. Is this a software bug or does it need to go back for repair?
Sent from my SM-G900F using XDA Free mobile app
My moto g4 plus dropped in water. I dried it completly and it works flawlessly next day rear camera stopped working . I have have tried everything. Hard reset ..New applications.. custom Roms... Open board clean it all and reinstall camera hardware component but all failed. NOW I want to know is there any way to set front camera as my default back camera. It works some time by luck but don't focus. Because flash and camera works simultaneously I can't turn my flash on. When I use a third party application to turn my flash on. It just turns on for a second then again turned off. I know everything else is just working fine. So my Question is there any method to disable my back camera and set my front camera as default so that I can use flash, WhatsApp Web.. etc. I have my phone rooted on Naugat 7.1. Please also suggest hardware solution to fix my damaged camera. Thanks.