hey guys, I have the Froyo update on this phone and i one day i accendntally put a password on it when i didnt and now i cant get back into my phone!!!! I also cant connect it to the pc/laptop bacause it has USB debbuging thnks to everyone who comments
if im not mistaken i had the same problem after 10 wrong attempts the phone asked me for my gmail id to reset the password.
if this does not work im afraid you will have to boot in recovery manager and restore the rom or you can wipe the rom and reinstall it if possible and no important data was on the phone
shekster12 said:
I also cant connect it to the pc/laptop bacause it has USB debbuging
Click to expand...
Click to collapse
what connecting to pc has to do with usb debugging? I think it should work properly
Related
I tried to reinstall an android rom on it and for some reason it keeps looping and the computer will not recognize it. I am able to get on MGLDR but the computer will not find my phone. Please I need hel I've been trying to fix it for the last 5 hrs.
If you still can have acces to th MAGLDR, just do the process again and re-flash your ROM... Do a full wipe before and all is gonna be fine
The problem is that the computer don't find my phone. I've tried everything I've found on the forum and still can get it to find it.
mtorr69 said:
The problem is that the computer don't find my phone. I've tried everything I've found on the forum and still can get it to find it.
Click to expand...
Click to collapse
Maybe you need the ADB drivers. Does it detect the phone in USB storage mode? Flash mode? Have you installed clockwork recovery? Can it detect the phone in that USB storage mode? Did it work before you made changes to the phone or is this your first Android flash?
Why don't you task29 your phone, install MAGLDR, throw a 150MB recovery image on, stick a recovery ROM on your SD card and flash again?
the computer does not detect the phone at all. It did work before I made the changes. It is my 2nd flash. and the problem is that the phone keeps looping after I boot from nand, iget the 123 and the gogogo and then reboots again
mtorr69 said:
the computer does not detect the phone at all. It did work before I made the changes. It is my 2nd flash. and the problem is that the phone keeps looping after I boot from nand, iget the 123 and the gogogo and then reboots again
Click to expand...
Click to collapse
Try to boot by pressing volume down and power. Then you will get to the tri-color screen. Plug in the USB cable and wait for a connection. If your computer doesn't even recognize it there, then you're really f***'d up, I would mean..
Edit: Or you didn't install the active sync drivers that SPL and your computer need to communicate.
JanssoN said:
Edit: Or you didn't install the active sync drivers that SPL and your computer need to communicate.
Click to expand...
Click to collapse
His suggestion of this being his second flash lead me to believe he's done that bit already.
I would have to say at this point it's either your desktop PC/Laptop or the cable.
I have a dodgy cable, sometimes when I "think" my phone is charging it actually isn't, even though the LED and OS tell me it should be.
Also my Laptop point blank refused to detect my HD2 a while ago.
Recommendations:
Try same cable in a different PC.
Try new cable in same & different PC.
If your work computers are on lockdown, you can at least take the cable there with you and see if the Administrator policy window pops up to tell you you're not allowed to install new hardware. That way you know the phone and cable are fine.
dkl_uk said:
His suggestion of this being his second flash lead me to believe he's done that bit already.
Click to expand...
Click to collapse
Yeah, you're right
Maybe it is also the port on his device, my port seems to have a loose connection too as it is not the most stable anyway..
Thanks everyone. I downloaded a recovery program on my SD card , rebooted and flashed again. Thank You very much for all your help.
Hey guys,
I currently recently installed a custom ROM from this website and for some reason now when I plug in my USB into my PC it comes up not being detected so when I put my phone as hard drive so I want to transfer music, it doesn't detect it. Can anybody help me if this is ROM problem or just my USB?
Hey,
Okay I disabled USB debugging didn't know it was on, still doesn't work says windows cannot find USB device not reconginzed when I connect the USB. For the Reinstalling usb driver I do not know how to this ~?
i have the same problem.. turn "fast boot" off and restart the phone.. this always works for me.. hope this helps
Hey, I turned fastboot off. Doesn't work. I ordered new usb cable.. hopefully this works and it was just a fault with the cable!
Sent from my Desire HD using XDA App
Usually this is a problem with the cable. Simple, cheap to fix. Keep your old cable around for charging though (nice to have a spare)
Is this problem with the USB still active?
If so try a different PC just in order to eliminate WinOS issues.
If not close.
Hi,
I have the same problem at some months ago. I tried the cable and pfone on another PC, and it works fine. So, I recommend to try it on another PC and reinstall your Windows.
brgs,
Herold
Had the same propblem! Turns out it was the usb cable, it charged fine with the cable but data transfer didnt work.
i also had the same problem since last week and still cant resolve till now...i try all the option that u gave(change cable/pc,turn off fastboot)....i even sent my phone to shop and they still cant detect.they said maybe the usb port is damage or some software that may block my usb port?is it true? anyone can help?????
necrs said:
i also had the same problem since last week and still cant resolve till now...i try all the option that u gave(change cable/pc,turn off fastboot)....i even sent my phone to shop and they still cant detect.they said maybe the usb port is damage or some software that may block my usb port?is it true? anyone can help?????
Click to expand...
Click to collapse
What happened last week? Is that when you got the phone? Or installed a different rom? etc.
Grant Barker said:
What happened last week? Is that when you got the phone? Or installed a different rom? etc.
Click to expand...
Click to collapse
before this is ok.just last week i remember that i pull the usb cable from the phone quite hard.but i don think that the usb too sensitive that will break by that.still can charging... but not detected in pc
I had similar problem and it was hardware, I sent it back to Vodafone and they sent me a replacement!
I am running CM7 now its awesome.
Andy
USB BRICK in my INSPIRE 4G ( DESIRE HD)
Hi, all
I got a new inspire 4g last week.( equivalent to desire hd ). It was working fine. But now it does not detect the USB connection. It only charges when I connect to pc. No other issues. I have also noticed that during fast boot mode also pc does not recognize the phone as device. I have tried all the suggestion on xda but no luck.
As fastboot is also not detected by PC I could not format mtd0 and reconfigure it.
Can anybody have any other idea? If I change the main board how much cost will incur ??
Thanks all.
Grant Barker said:
What happened last week? Is that when you got the phone? Or installed a different rom? etc.
Click to expand...
Click to collapse
musarraf172 said:
Hi, all
I got a new inspire 4g last week.( equivalent to desire hd ). It was working fine. But now it does not detect the USB connection. It only charges when I connect to pc. No other issues. I have also noticed that during fast boot mode also pc does not recognize the phone as device. I have tried all the suggestion on xda but no luck.
As fastboot is also not detected by PC I could not format mtd0 and reconfigure it.
Can anybody have any other idea? If I change the main board how much cost will incur ??
Thanks all.
Click to expand...
Click to collapse
First of all.. you have HTC Sync installed right?
Happened to me initially as well.. although for me changing the cable and/or changing the USB port on the PC solved the issue. Have you tried these?
Also sometimes killing all apps on the device before connecting helped.
You can try accessing your device through ADB to see if its being detected.
And I really dont think you'll need to change the main board..
USB brick on my Inspire 4G
Thanks for your reply. When I go the phone ADB and Fastboot were working
well. There was no driver issue. Now even PC also does not detect the phone or any new hardware when I connect it to pc. I had working fastboot on both win7 and Linux (ubuntu) pc. Now in both OS the phone is not detectable. Windows device manager does not see any new hardware when I connect my inspire . dmesg also does not show my hardware when I connect my inspire to linux pc.
Please help or suggest me to investigate further. I know how to install and work with adb and fastboot as well as Clockwork recovery ( also ext recovery). Some people suggested to flash a new radio. I can flash the new radio via sdcard. But how safe is it ? My phone is S-off and made unbranded. Will flashing a new radio make my phone locked AT&T again? ????
Thanks a lot
if4ct0r said:
First of all.. you have HTC Sync installed right?
Happened to me initially as well.. although for me changing the cable and/or changing the USB port on the PC solved the issue. Have you tried these?
Also sometimes killing all apps on the device before connecting helped.
You can try accessing your device through ADB to see if its being detected.
And I really dont think you'll need to change the main board..
Click to expand...
Click to collapse
As far as I know.. USB problem has no relation whatsoever to Radio. Radio is only concerned with the signal stuff. Flashing it isn't that risky if you follow the instructions... There's a thread in the development section about Radio's which explains it pretty nicely.
As for the USB problem, are you using a Custom ROM? Some ROMs like LeeDroid have USB detection problem which can be solved simply by flashing a different kernel like LordMod's.
What I meant by "Accessing through ADB" was if commands like "adb remount" or any adb command as such are working when your phone is connected to the PC? Or is it showing "error: device not found"?
I am having problems with my N7 not connecting to my desktop. I can get into bootloader and recovery but I can not mount USB to add a rom. I'm SOL as of right now and have no clue what to do...
uitfenc families
makross said:
I am having problems with my N7 not connecting to my desktop. I can get into bootloader and recovery but I can not mount USB to add a rom. I'm SOL as of right now and have no clue what to do...
Click to expand...
Click to collapse
Could it be related to this issue:
http://forum.xda-developers.com/showthread.php?t=1821536
If you have plugged your Nexus 7 on a car charger, the usb might be dead and only be used for charging (and so unable to transfer new ROM data).
charging is fine...is it possible that I did not enable usb debugging before i wiped to factory reset that it would prevent me from connecting???
alright heres alil update i tried using WUGS toolkit and trying to unroot everything was going fine until it cannot find the flashstock.bat...now im back to square one. i cant find the flashstock.bat anywhere
I was having the same problem. It would see the camera mode, but not the mtp. I read in another thread to turn off debugging in settings. What do you know. It worked! Computer sees the tablet now just fine.:victory:
Hi all,
i have a problem with my Nexus 4 , my PC doesn't recognize my phone not in mass storage not in the device manger, but it will charge the phone also i cant get in my recovery it says NO COMMAND , i got Un rooted phone with unlocked bootloader and i have stock rom 4.4.0 krt16s.
any ides?
tnx for the help...
and i try to change cable, pc, other os, nothing helped.
Does your phone boot normally? Can you turn on USB debugging?
audit13 said:
Does your phone boot normally? Can you turn on USB debugging?
Click to expand...
Click to collapse
yes it boot normally and i can turn USB Debugging and it still doesn't recognize with and without USB debugging mode.
When you select recovery from fastboot, that's when you get the "no command" error?
audit13 said:
When you select recovery from fastboot, that's when you get the "no command" error?
Click to expand...
Click to collapse
yes
delete
Its drivers problem.
Delete all driver you have then install again
Oz4225 said:
Its drivers problem.
Delete all driver you have then install again
Click to expand...
Click to collapse
i got fresh windows without any drivers.
Install this driver:
https://www.copy.com/s/C9uWyr4n4WEE/UniversalAdbDriver.msi
Oz4225 said:
Install this driver:
https://www.copy.com/s/C9uWyr4n4WEE/UniversalAdbDriver.msi
Click to expand...
Click to collapse
no help
rep
theshield88 said:
Hi all,
i have a problem with my Nexus 4 , my PC doesn't recognize my phone not in mass storage not in the device manger, but it will charge the phone also i cant get in my recovery it says NO COMMAND , i got Un rooted phone with unlocked bootloader and i have stock rom 4.4.0 krt16s.
any ides?
tnx for the help...
Click to expand...
Click to collapse
I do same kind of prob with my PC. The root of problem is mostly the USB cable itself. I've got the stock nXs⁴ cable yet after a year its out I think. When that happens try some many cable.
The prob might even occur due to MTP. If debugging is enable then ADB would recognize nXs⁴ as offline and no Portable media device would be visible in My PC. In that case try restarting PC!
nXs⁴ aRvInD G R
Hello Everyone, I have flashed my Lenovo K4 Note with RR 5.8.3 recently, everything went fine thanks to the developers. But my sd card and phone memory won't show in PC after connection through data cable. I tried all the methods in Google of USB driver updating and all, but nothing is working. Please help am not able to transfer files or access my phone in P.C.
Hello my friend
This happened to me too .. try enable usb debugging and oem unlock If it did not work .. try another pc or install new win then install driver and i'm sure it will be work
mahmoudehab said:
Hello my friend
This happened to me too .. try enable usb debugging and oem unlock If it did not work .. try another pc or install new win then install driver and i'm sure it will be work
Click to expand...
Click to collapse
Thanks for the prompt reply. Dude, a not able to find OEM unlock in the Developer Options, earlier it used to be there. And i tried USB debug still not working.
mahmoudehab said:
Hello my friend
This happened to me too .. try enable USB debugging and OEM unlock If it did not work .. try another PC or install new win then install driver and I'm sure it will be work
Click to expand...
Click to collapse
Hey, Bro, I found the solution
1. Goto C:/Windows/INF and search for wpdmtp.inf & right click and install it.
2. Turn on safe mode on your phone and then connect it to PC then remove safe mode.
moi_sudeep said:
Hello Everyone, I have flashed my Lenovo K4 Note with RR 5.8.3 recently, everything went fine thanks to the developers. But my sd card and phone memory won't show in PC after connection through data cable. I tried all the methods in Google of USB driver updating and all, but nothing is working. Please help am not able to transfer files or access my phone in P.C.
Click to expand...
Click to collapse
Brother i think you have missed something. Open developer option and ON USB Debugging. If you connect your phone with PC then by default it will be connected as a charger you have to change it to Transfer Files.
Swipe down your notification pannel and there is a notification of USB touch that and new popup will open to phone and then change it to Transfer Files and you are done. Now you can transfer files.
I uploaded some screenshots to help you better.
Hit like if you think i helped you.
moi_sudeep said:
Hello Everyone, I have flashed my Lenovo K4 Note with RR 5.8.3 recently, everything went fine thanks to the developers. But my sd card and phone memory won't show in PC after connection through data cable. I tried all the methods in Google of USB driver updating and all, but nothing is working. Please help am not able to transfer files or access my phone in P.C.
Click to expand...
Click to collapse
Goto device manager in pc, under portable devices you will find MTP device. Right click and uninstall the driver. A new icon with exclamation mark should appear. Double click on it, installation wizard pops up then click on ' browse my computer for drivers' then you find mtp drivers now install MTP USB Device... Not MTP Device. Just reconnect the phone. And the job is done.
moi_sudeep said:
Hey, Bro, I found the solution
1. Goto C:/Windows/INF and search for wpdmtp.inf & right click and install it.
2. Turn on safe mode on your phone and then connect it to PC then remove safe mode.
Click to expand...
Click to collapse
thanks! its worked for me
Hello please that can help me I am totally lost ... my phone lenovo vibe k4 note after 4 months of normal use ... suddenly I notice that the charge percentage thinks and descends quickly like a crazy Then it loads itself ... and again the pc can not detect it in normal mode or the mode of download (by the method of flash tool) ...