help me please my iconia just have cant start up nothing works seems like the Bootloade is dead, the Recovery mode, CWM Mode, Computer Connection as well. when i try to connect to pc with cable data just detect acer picasso usb boot recovery driver cant get the cpu id from the dview help me pls
Take a look at this.....
http://forum.xda-developers.com/showthread.php?t=1255519&page=2
There's a link in the posts that may help you.
I hope it helps you.
try getting a ROM, rename to update.zip, put on root directory on your External SD, put back in, boot to recovery, and try....
Edit: Wrong thread
Related
Hello everybody,
As i was flashing the new Acer Liquid E 1.100.05 rom, the process stopped from responding, i tried to unplug and plug the usb nothin happened, then i restarted the phone, it boot to the old rom but without usb connectivity, i can access to the recovery mode but either the phone or the pc can detect each other it still can charge, i reinstalled drivers, changed pc, same problem, no usb detection even in recovery mode, i can see the sd from recovery though, is there a way to flash the original rom 1.6 from the sd.
thanks in advance.
Try booting in Bootloader (Camera + <), and install malez recovery from here :
http://code.google.com/p/acer-liquid-malez-recovery/
If you already have it, do it once again.
Reboot in recovery, and acer tool should recognize the phone.
Otherwise, check @modaco here : http://android.modaco.com/content/acer-liquid-liquid-modaco-com/308361/bricked-liquid-heeelp/
This should help
thx man, you are da man, it works
thx again.
Hello,
Any and all help would be appreciated.
I am able to boot off the SD just fine. I can't boot without the SD. Nothing happens. If I have it connected to the PC I hear the PC recognizing a USB device but nothing on the screen of the nook.
I can't get into RECOVERY at all.
Here is what caused this. Really dumb... I tried to restore a RECOVERY backup from another Android device. At that point I was booting off the internal flash.
What can I do? Thanks in advance.
UPDATE:
I was able to get into CWR from SD using info finally found in this thread...
http://forum.xda-developers.com/showpost.php?p=11452450&postcount=19
Hi All,
I try to install different ROMs and Ubuntu phone on my Nexus 4 to check it out..
Long story short,
I have a device and only boots into recovery mode... Everything else has been wiped !
USB doesn't work..
Recovery mode does not help because all files are wiped...
I'm hoping there is a way to get usb to work, so I can push recovery files/new img.. whatever is necessary..
any ideas ?
Thanks in advance !
Hi there,
So I did something really stupid and I wiped my phone while in recover mode trying to install a new ROM. And now I'm stuck with a useless phone that can only go into TWRP and Firmware Update Mode.
I've tried every method to unbrick my phone, and have a previous thread on this forum trying to get help (http://forum.xda-developers.com/showthread.php?p=48914581#post48914581), but nothing is working.
My question now is I'm running TWRP 6.3.2.2, If I buy a USB OTG cable and put my rom files on a USB thumbdrive, can I then install the rom from the usb? If so, where in the filesystem does this usb storage show up?
BraydenJW said:
Hi there,
So I did something really stupid and I wiped my phone while in recover mode trying to install a new ROM. And now I'm stuck with a useless phone that can only go into TWRP and Firmware Update Mode.
I've tried every method to unbrick my phone, and have a previous thread on this forum trying to get help (http://forum.xda-developers.com/showthread.php?p=48914581#post48914581), but nothing is working.
My question now is I'm running TWRP 6.3.2.2, If I buy a USB OTG cable and put my rom files on a USB thumbdrive, can I then install the rom from the usb? If so, where in the filesystem does this usb storage show up?
Click to expand...
Click to collapse
I believe only TWRP 2.6.3.4 can support OTG (I've been happy with it).
I think you may have to ADB push the files from PC over while in recovery (may need to look around).
Ok so I figured this is my MAIN problem not being able to flash my Acer A500 and not being able to put a custom bootloader and recovery on it. My computer all together cant recognize my Acer ONLY when its in APX mode! My Acer IS ROOTED as well. My computer will recognize it normaly when its on and plugged i and i can transfer files and what not bewteen my computer and the Acer. But once I put it in APX mode thats when things go down hill! My computer installed a driver called "Acer Bootloader-Recovery" driver the first time i put it in APX mode. But still wont seem to recognize it! BUT!! I can go into my "Devices and Printers" and their it shows i have an "APX" device connected and its under "Unspificed" devices. So no matter WHAT program I use to flash it or install a custom recovery/bootloader, it can NEVER find my Acer! Even when i try to do an EUU to fully wipe the thing back to HC it STILL wont recognize my Tablet!!!! Its SO FRUSTRATING.... since to do anything with my tablet it needs to be in APX mode....I have ALL drivers installed. I got em off the website and downloaded the "HC 3.0.2" drivers (since they dont have any drivers for my ICS 4.0.3v).... So can anyone help me on this? Ive tried almost EVERYTHING i can in the book to get this thing to flash and recognize my Acer, but just wont.....heres ALL my tablet info if this helps at all:
Tablet Serial : 12713752215
Tablet Cpuid : 037C61C9408103D7
Tablet Sbk : 0xE4531F00 0x18070000 0xF74EE402 0x11DE2003
Android Build : Acer_AV041_A500_1.033.00_PA_CUS1
Bootloader : 0.03.12-ICS
Not even the Babsector.rar file will recognize it! If anyone could help in anyway possible please do so! Im at my last resort and i really cant think of anything else to do to it....