Pen Issue... - Galaxy Note GT-N7000 General

Hi,
I noticed yesterday by painting this:
http://www.youtube.com/watch?v=mn1spljliH8
http://www.youtube.com/watch?v=CqnbvnBuLSk
I checked it on mine and its the same, you can test it on your device with an cd/dvd try to draw the innercircle on the screen on my screen there is a offset of 2mm...
Or you can check it enabling the earser set him on lagerst stetting an hold the pen on the screen...

either your pen is set to left hand mode or needs to be calibrated, not an issue on mine.

no issues here...working like charm..am lefty tho and it's set to lefty mode..love it...wrote the entire todays lecture

I get the same. I didn't found anything on the settings to fix it. I hope it'll be fix.
EDIT: I think I know where the problem comes. You put the S-Pen 80-90° on the screen, but if you put it on 10-20° this problem disappears. If you hold any pen 80-90º normally you have to adapt your manners.... Anyway, this is pretty annoying.

Related

upside down screen

Ok everybody, grab your phone and TURN IT UPSIDE DOWN. notice how easy it is to use the joystick/thumb navigation button. in fact, this works nicely for any bar-style phone or device. the screen remains visible next to your palm and thumb. this is such an obvious idea once you think of it. I once wanted to patent this. but somebody already had a similar idea. please, if you use this idea, try to give me credit. call it the Bessler upside down phone or something. anyway, can someone make a program that will flip my screen upside down? wm5 only has two landscapes and a portrait. Thanks
wow...
here there's a program that flips the screen upside down when you click on it multiple times. only problem is the buttons don't switch direction.
http://www.geocities.co.jp/SiliconValley-Cupertino/2039/
And here's one that rotates 180 degrees in one go:
http://www.pocketgear.com/software_detail.asp?id=15332
There's three readily identifyable problems with holding the device up side down, though.
1. I'm not sure how ergonomic it really is. I've attached pictures of me holding the device up side down, and upright. You'll notice that in the first up side down picture, my thumb is relaxed, but as a result obscures the screen. To make it not obscure the screen, I actually have to bend my thumb which, other than eventually inducing pain, leaves you with less control as you're navigating with the top of the side of your thumb. Maybe I'm holding it entirely wrong though
2. The buttons issue. 'nuff said. This probably a programmatical error, though - must me some manner of telling the operating system that you rotated the screen, and that the buttons should follow suit.
3. ClearType. ClearType assumes the ordering of your LCD is RGB. If you rotate the screen, the ordering is BGR - but ClearType still assumes RGB. The result is that your screen becomes very difficult to read when using ClearType. The solution here is to disable ClearType, but who would want to do that? %) Images of what this looks like are attached as well. Note that I actually had to cheat the images, because if you rotate the 'up side down' wrong order screenshot back to normal, the ordering becomes RGB again and it looks fine. You can try it for yourself to make sure my screenshot isn't bogus, though

[Q] Touch Screen Problems

Is anyone else having problems with their touch screen?
It will occasionally become unresponsive, and other times will just start 'clicking' repeatedly in random spots.
I find myself having to turn the power off and on (via the button, not a hard power cycle) to fix the issue. Its starting to get annoying.
Anyone else?
Yes, I am getting the same thing but I've found that if I just turn the screen off and then back on it fixes the problem. I don't need to reboot.
You think this would warrant an exchange? or is it just how its going to be?
I've put several hours on mine, but haven't experienced this issue. I don't know, if this happened to me more than once, I probably would exchange it.
It was happening to me all the time. I had to get a screen protector and haven't happened since.
ryoojin83 said:
Is anyone else having problems with their touch screen?
It will occasionally become unresponsive, and other times will just start 'clicking' repeatedly in random spots.
I find myself having to turn the power off and on (via the button, not a hard power cycle) to fix the issue. Its starting to get annoying.
Anyone else?
Click to expand...
Click to collapse
gigadigit said:
It was happening to me all the time. I had to get a screen protector and haven't happened since.
Click to expand...
Click to collapse
Very good "solution" to what should be an obvious problem. The Nook Color has a *capacitive* touch-screen. If you get "junk/gunk" on the screen, it's gonna cause you issues. I find this to be the case while holding my NC and playing Flight Director for a while. The issue: My hands become sweaty and as a result of the slight film of sweat/oil on the screen, the NC's ability to measure the capacitive changes on the screen (and react appropriately to them) is compromised.
Keep your screen clean and you won't have this issue.
Note: after you wipe the screen down (damp cloth, etc), you will need to click the power button and go the lock screen and then back into the NC before it works right directly after cleaning the screen. The dampness of the cleaning cloth throws up the calibration enough to cause very strange things. My experience with "correcting" this issue tells me that in some way, the NC is recalibrating itself when you go to the lock screen.
johnopsec, this has been my experience as well. After cleaning the screen from finger-jam i don't get the phantom clicks. I also noticed that because I live in a very humid climate (Florida panhandle) there will be a thin moisture layer buildup sometimes and it really helps to wipe this off. I also have an incredible that does not have this problem but it has a screen protector which, I am guessing (and as gigadigit expressed), fixes the problem. Just make sure the screen is clean and dry before applying!
screen response
Also,
If you are holding the side of the case by the screen this throws off the touchscreen, I was having the issue where it would be clicking and multiple letter inputs when typing.
Also when it is laying flat and you have the power cord plugged in you may get multi letter inputs.
The trick, hold it by the back not the sides.
and if you have it plugged in and need to type don't leave it laying flat.
I have experienced this problem and loosely seen it correlated with moist fingers.
no moist fingers here and on my 2nd nc. this ones starting to have the ghost touches too.
My Nook Color started acting up after paying levels 3-4 to 3-6 of Angry Birds. I'm not sure if Angry Birds caused the issue or not as I haven't gotten it to do it in another app. I'm running 1.4.2. Doing a lock and unlock fixes the problem until it returns.
I managed to get Phone Tester to run after it got into this state. I made a video of it using a crappy webcam. There's a stuck finger in the corner.
youtube.com/watch?v=OdcVG-Q8LS4
Touch Screen issues while unit is plugged in..
It seems I have read on some forums that some people have screen issues.
Personally I didn't experience this until I tried to use my NC while plugged into it's wall charger.. It seems to act as if it has a grounding issue, which is not the case when the unit is unplugged.
So when you are running your multitouch or touch tests, do it without the unit plugged in..
-CC
I have had the same problem with my touch screen. I have the nexus live wallpaper and whenever you touch the screen it sends off the animation. Well sometimes it just goes non stop and sometimes opens up the window where you can apply a widget. I guess the most practical solution would be a screen protector but if not ill restore it and send it off to B&N
There's a small little app in the market named "Nook Screen Recalibrate" this app is super simple and easy to use. I hope this helps
https://market.android.com/details?id=com.assid.android.nookrecalibrate&feature=search_result
Here is the issue I have...
Right is the N button side. Just a reference point for this.
Reboot the Nook (I use CM7).
Bring up the keyboard
Touch Q in the center - you get W.
Touch Q on the right - you get W
Touch Q on the left - might get Q but you usually get W.
Recalibrate using the Nook Screen Calibration (above).
Q now gives Q unless you press on the right side of the key. I also notice I still have to hit the back arrow more to the left or I bring up the keyboard.
I've learned to live with it, but the left side of the touchscreen is slightly off and you have to touch to the left side of any object on the last 1".
Awats said:
Here is the issue I have...
Reboot the Nook (I use CM7).
Bring up the keyboard
Touch Q in the center - you get W.
Touch Q on the right - you get W
Touch Q on the left - might get Q but you usually get W.
Recalibrate using the Nook Screen Calibration (above).
Q now gives Q unless you press on the right side of the key. I also notice I still have to hit the back arrow more to the left or I bring up the keyboard.
I've learned to live with it, but the left side of the touchscreen is slightly off and you have to touch to the left side of any object on the last 1".
Click to expand...
Click to collapse
yeah, for me it's the edge of the screen along the right side. it's less sensitive then the rest of the screen. I found that calibrating 2-3 times really works best.
There's also a fix in the nookwiki, but i can't get my adb to work on my laptop, I think its the drivers.
http://nookdevs.com/Recalibrate_the_NookColor_touch_screen
What is the left and right side?
I should have said that left is the side opposite the N button.
I downloaded Multi-Touch Screen from the market and I can see part of the problem is the angle of my finger. Straight on it's better.
Nook Color Touch Screen Problem
Having similar problem as described, after two years. Extended warranty expired ... two weeks ago (of course).
Tried cleaning screen, no help. Have not tried screen saver yet, but will.
In the meantime, I notice the comments about touching the sides, and I noted that as well.
Is it possible that this could be helped by opening it up and re-seating the case? Has anybody tried this?

C'mon Samsung - need S-Pen calibration!

As a left-hander, the S-Pen SUCKS.
I've set the phone to left-handed, but that isn't the issue.
The phone expects the user to hold the pen at an angle away from the user, and that's where the screen registers.
However, many left handers hold their pens at an angle TOWARDS themselves, and the S-Pen is off by nearly HALF A CM!!
Unsinkable II said:
As a left-hander, the S-Pen SUCKS.
I've set the phone to left-handed, but that isn't the issue.
The phone expects the user to hod the pen at an angle away from the user, and that's where the screen registers.
However, many left handers hold their pens at an angle TOWARDS themselves, and the S-Pen is off by nearly HALF A CM!!
Click to expand...
Click to collapse
Tell me about it...
It's so irritating
are you sure you got it in left hand mode? i have mine set to my left hand and tried writing with my right. was off like you said (to the right). tried again with my left hand and it seemed fine.
crazy talk said:
are you sure you got it in left hand mode? i have mine set to my left hand and tried writing with my right. was off like you said (to the right). tried again with my left hand and it seemed fine.
Click to expand...
Click to collapse
I have it set to left handed.
When changing the settings to right-handed and using my right hand (I'm a little ambidextrous) it works fine. Nice and accurate. Mostly because with my right hand I hold the pen at a conventional angle.
However, many lefties don't hold their pens conventionally (habits picked up by the necessity of avoiding ring bindings, minimising smudging, etc). Look at how President Obama holds his pen:
http://www.post-gazette.com/pg/images/200901/20090126ho_lefthandedobama_330.jpg
See how the nib of the pen is angled TOWARDS him? The Note thinks it's angled away and puts down a line in totally the wrong place.
Even with my slightly less unconventional left-handed pen hold, it's WAY out (no matter whether the unit is set to left or right hand use, though left is slightly less awful).
How hard can it be for Samsung to provide a calibration app?
Right now, the Note is a phone unsuitable for a President!
Do you find any difference when you change the screen orientation then back again?
Beards said:
Do you find any difference when you change the screen orientation then back again?
Click to expand...
Click to collapse
None at all, unfortunately.
I find that no matter what I do with the pen it always seems to write half a cm above where I have contact on the screen
Sent from my awesomely awesome Galaxy Note with XDA Premium
SPen uses autocalibration feature, which unfortunately goes off after some time. Which is a bug by itself but not the point..
Everyone complaining about pen being way off try this:
set it to whatever your hand preference. Please phone on flat surface like a table and reboot phone. Do not shake or touch it too much. Open SNote and try to draw around grid lines, you will see that pen works perfectly with tip being exactly as expected.
However more you use pen more it will deviate off until reboot is needed. It happens especially fast if you are using it walking, upside down etc.
vvs said:
SPen uses autocalibration feature, which unfortunately goes off after some time. Which is a bug by itself but not the point..
Everyone complaining about pen being way off try this:
set it to whatever your hand preference. Please phone on flat surface like a table and reboot phone. Do not shake or touch it too much. Open SNote and try to draw around grid lines, you will see that pen works perfectly with tip being exactly as expected.
However more you use pen more it will deviate off until reboot is needed. It happens especially fast if you are using it walking, upside down etc.
Click to expand...
Click to collapse
Interesting (though it didn't help in my case)
But it the calibration goes off after time, then there is even more reason to add a calibration facility.
I reckon that only happens when you're using landscape orientation and then you turn off autorotation without first returning to portrait orientation. Try turning autorotation on, setting it to portrait and then turn it off. That should fix it.
Sent from my GT-N7000 using xda premium
Thanks, but it really is nothing to do with orientation in my case.
It's ALL about the angle at which you hold the S-pen.
It expects the nib to be angled away from you, whereas I hold a pen with the nib angled towards me.

[Q] soft key problem (screen shot and palm rejection keys)

when i first hold the tablet (and even before) i tought that screen shot key is priceless. its very useful. when i read a book or surf on the web it lets me cut and share/send anything on my screen after cropped as i like. but them losing that key when i put stylus in its silo was a bit uncomfortable. most of the time i need that key i wasnt using. so i was sondering if its possible to keep those keys "all the time"
than something happened and its really bad. i totally lost those keys. when i pull of the stylus it doesnt feel it. it doesnt show those keys and it doesnt pop direct stylus launcher (even the setting is right) i tried to tweak it with simple methods like pulling it out ressetted pulled in resetted again etc but doesnt work.
so for get the direct stylus launcher, the question is, is there a way to make those screen shot and palm rejection keys "always on" no matter what?
i couldnt find any other people having this problem but even for the people doesnt have this problem, have an option to have those keys all the time should be nice.
I had this same problem with my girlfriends tetra note 7. Basically the tablet recognises the sylus by a little magnet snuck away in the stylus and in the tablet. When the two attract the tablet recognises the stylus in it and visa-versa. All I did to sort the issue was undo the tip of the stylus and re scree it back on again and that seemed to sort the issue. Sorry if you have sorted the issue
Sent from my SM-T320 using XDA Free mobile app
I did had to try it 3 times but at least can confirm: un-, and rescrewing the metal end does seem to sort the issue out. Just when you do so, unscrew the inside part of the metal end/cap aswell!
Hi, i am facing the same issue with my newly bought tab
But I am not able to solve it by unscrewing and rescrewing the stylus even 10 times...
If any other solution , plz help

E-ink Lock Screen

Hello everyone,
So, I'm having a bit of a strange problem with my Yotaphone 2...
I did a factory reset on it a while back, and everything went fine, except now, when the screen is locked, I can no longer unlock the e-ink screen by dragging up the lock icon on the bottom of the e-ink screen. I have to use the hardware power button, which is a little bit inconvenient at times. I've spent quite a while trying to locate what setting got effected to make it not function, but with no luck. Anybody have any idea where I can turn this function back on?
It happened to me too, I think it was something related with the Lollypop update, but could be some setting that has changed and that I cannot find. However, I found that if I double tap before tracing the finger motion, it usually works. That's why I didn't look further into the issue.
alienBaboso said:
It happened to me too, I think it was something related with the Lollypop update, but could be some setting that has changed and that I cannot find. However, I found that if I double tap before tracing the finger motion, it usually works. That's why I didn't look further into the issue.
Click to expand...
Click to collapse
No luck for me. I'm still on Kitkat anyway...
Looks like I might be stuck...
alienBaboso said:
It happened to me too, I think it was something related with the Lollypop update, but could be some setting that has changed and that I cannot find. However, I found that if I double tap before tracing the finger motion, it usually works. That's why I didn't look further into the issue.
Click to expand...
Click to collapse
Actually, scratch that... after your double tap suggestion, I started randomly tapping around managed just once to get it to unlock from a screen touch, but have not been able to replicate the movement so it happens again. What movement exactly do you use to get it to unlock?
Update:
Seems to be some kind of sensitivity issue. I can get it to unlock about once out of every 50 swipes. Less than ideal.
I leave the phone with the E-ink screen facing up (to prevent the gyroscope from switching sensitivity to the amoled display instead), then press twice the lock icon, and on the second time my finger touches the E-ink, I drag it up to the center of the phone. It took a bit of practice but now I can get it to work consistently. The double tap is because if the phone has been inactive for a while, it enters sleep mode, and it looks like that turns off the finger gesture recognition. Other possible explanations are that maybe you don't press the screen firmly enough, or maybe you placed some plastic sheet over the back display and that reduces sensitivity.
I noticed that the unlock gestures on the EPD work only when the phone recognizes that you've it in the hand or you're using it. So I take it and I unlock it effectively. Trying to unlock when it lays down and you haven't moved it for a while brings to your experience.
Thanks to both of you for the advice... unfortunately, neither seems to be doing the trick. Just a caution for any other people who are thinking of doing a factory reset - it seems to seriously impact sensitivity for the e-ink unlock, so be aware.
I never succeed to do slide up unlock even within 1st tutorial. Double tap unlock was the only workaround for me. Also activated glove sensitivity mode.

Categories

Resources