Related
Is anyone experiencing this problem. I have now lost my fourth stylus. The slightest knock will dislodge the stylus whilst on the belt clip. Because the xda 11 will now swivel around due to the location of the clip, stylus will fall from unit. Anybody got sources for replacements?
I haven`t lost one yet but
I must amid, these things are lovely to eat , as they are so much smaller and tinner than the IPAQ ones. And they also make a lovely toothpic.
And of course of the perfect shape at the top, they are the ultimate tool to clean out your.... :wink:
Same here im on my 3rd. I have purchased more from www.pdaaddons.com
I have had mine for a little over a week and have already lost one stylus.
Looks like I will be reverting to my Rotring 600 Trio as I find the stylus way to tiny in any case.
http://www.styluscentral.com/rotring600trio.html
I tried www.pdaaddons.com but they don't mentiona stylus for the xda2.
Stylus XDA II PLUS pen!
I know ink is soooo passé...
but I got a stylus that has a dead handy ink-pen inside from brando.com!
Refills very cheap too! Very quick delivery from Hong Kong.
Tightening up the Sytlus Holder
Is ther any way to do this?
Kind regards
Alan
I have noticed that the ones o2 uk shops sell are slightly thinner than the original one that came with my XDA2, and keeps slipping out, could try some blue tack to hold it in place!!!
try ebay.
A lot of compnies are offering styli in 3-pack, which gives you 2 spares!
ccc
The trick is not to loose it!
Needs to fit better
After losing two styluses, I bought a stylus with a built-in pen at the other end. To keep from losing this stylus, I modified the XDA II case. I cut the transparent hard plastic packaging material of the stylus and attached it using electrical tape to the top of the XDA II leather case. The plastic is now blocking the path of the stylus. There is no way now for the stylus to fall unless I open the case.
I don't like cases so I don't have that option. I was wondering if there was a way to modify the silo or perhaps put some sort of compression spring/washer in the grove at the bottom end of the stylus
Jargon said:
After losing two styluses, I bought a stylus with a built-in pen at the other end. To keep from losing this stylus, I modified the XDA II case. I cut the transparent hard plastic packaging material of the stylus and attached it using electrical tape to the top of the XDA II leather case. The plastic is now blocking the path of the stylus. There is no way now for the stylus to fall unless I open the case.
Click to expand...
Click to collapse
Real Filipino inguinity.. hehehehehe... :lol:
Almost lost my sytlus two days ago, its a good thing that I remembered that I tried to get the stylus out while in the car but had to stop because my XDA2 fell in the floor. After 2 hours my friend noticed that the stylus is missing, took me a few minutes before I remembered the attempt that I made while inside the car... hehehe.. almost made me angry at the thought of losing the stylus...
Which case for the Prophet would you recommend?
My main criteria are:
- Screen protection
- As slim as possible
- Leather (desired)
- Cheap :wink:
Any advice is greatly appreciated.[/list]
the slimest there is... you can't use the touchscreen unfortunatly (or am I wrong maybe?)
anyway I havn't seen a leather case that wouldn't make a brick out of a prophet. I find it strange - you can quite comfortably put a prophet in your pocket, wich makes it very portable, but you can't have a case that doesn't spoil it.
You might find the following case suitable. I believe it adds the least volume to the unit given that it is conformal and very thin. (There might be something better, but I'm not aware of it.)
http://www.ebcases.com/Detail.bok?no=3331
There is also the possibility to customize the case as well for a fee. Thus one can ask the supplier to minimize thickness rather than providing the maximal protection to the unit.
After much pondering I came to the conclusion that having no case was best. It keeps the prophets small foot print and is still very useable. Invest in a good screen protector though.
drwhitesnake said:
After much pondering I came to the conclusion that having no case was best. It keeps the prophets small foot print and is still very useable. Invest in a good screen protector though.
Click to expand...
Click to collapse
I felt exactly the same until I accidentally dropped mine about 2 1/2 feet onto a tile floor and it dented/scratched the top corner of the device. Not extreme, but it was only a light tap on the ground.
I immediately went out and bought a gel skin made for the Prophet. Adds nothing to the weight/size/form-factor of the device.
I saw one that had a flip down plastic screen protector as well, but figured that was a little overkill.
Of course, these are in cell phone shops all over Asia, don't know about other countries.
I've found many people on the street using these skins instead of cases just because of the form-factor element. It's a shame to ruin such portability and, dare I say, elegance, to protect it.
But even now I feel like one of those guys that leaves his television remote control in the cellophane wrap so that it won't get any wear and tear... it was made to be used!
vsc said:
You might find the following case suitable. I believe it adds the least volume to the unit given that it is conformal and very thin. (There might be something better, but I'm not aware of it.)
http://www.ebcases.com/Detail.bok?no=3331
There is also the possibility to customize the case as well for a fee. Thus one can ask the supplier to minimize thickness rather than providing the maximal protection to the unit.
Click to expand...
Click to collapse
Hi vsc, that is a great case - the best I have seen so far! Thanks for the link.
I see that this case is for the Jam though - are the Jam and Jamin 100% identical (the form is identical (I believe) but not the button arrangement, right?).
I will contact ebcases directly also.
Thanks!
I asked the guys in the UAE and was told that the JAM / JAMin are identical. From the spec sheet they are within 0.2mm in size.
To be honest I had one of these in hand a few weeks ago and there was no issues with button placement and fitement in the case.
thulsey said:
I felt exactly the same until I accidentally dropped mine about 2 1/2 feet onto a tile floor and it dented/scratched the top corner of the device. Not extreme, but it was only a light tap on the ground.
I immediately went out and bought a gel skin made for the Prophet. Adds nothing to the weight/size/form-factor of the device.
I saw one that had a flip down plastic screen protector as well, but figured that was a little overkill.
Of course, these are in cell phone shops all over Asia, don't know about other countries.
I've found many people on the street using these skins instead of cases just because of the form-factor element. It's a shame to ruin such portability and, dare I say, elegance, to protect it.
But even now I feel like one of those guys that leaves his television remote control in the cellophane wrap so that it won't get any wear and tear... it was made to be used!
Click to expand...
Click to collapse
That is the reason why I really think that a protecting case is necessary (in case the device falls that is) - specially for a $600 device.
On the flip side, adding unnecessary bulk to a device which was purchased due to its slim form factor is kind of contradicting. Thus, I am searching for a very slim case, which still provides protection.
thulsey, which silicon case are you using? Have you heard of Skintight cases from Pamwarelabs http://www.palmwarelabs.com/Products/ProdList.aspx?CateID=36 ?
vsc said:
I asked the guys in the UAE and was told that the JAM / JAMin are identical. From the spec sheet they are within 0.2mm in size.
To be honest I had one of these in hand a few weeks ago and there was no issues with button placement and fitement in the case.
Click to expand...
Click to collapse
Thanks vsc!
As long as the cut outs are not covering buttons, I guess thats fine then.
So, from the pictures of their website, the case really looks very tight and it appears that it doesnt add any (at least not too much) bulkiness to the s200. How does the case appear if you saw this it in person and on a Prophet? Do the pictures reflect the impression given on their site?
What about these?
Has anyone tried out the aluminium cases like the ones sold on expansys? Or this one for example
http://www.seidioonline.com/index.asp?PageAction=VIEWPROD&ProdID=71
I know the last one is kind of not a case, but a carying holster, but nevertheless...
Yes the pictures are a good representation of the actual case.
Note that the cover flap has padding on the outside surface, but the supplier can manufacture the case without the padding to reduce volume. There is a hard card within the flap, so I don't consider the padding to serve any purpose.
On the other hand the case I'm using while I wait for the leather case is from Brando,
http://shop.brando.com.hk/bwsiliconecase_details.php?id=49
Simply put the unit in your pocket with the screen facing inward.
vsc said:
Yes the pictures are a good representation of the actual case.
Note that the cover flap has padding on the outside surface, but the supplier can manufacture the case without the padding to reduce volume. There is a hard card within the flap, so I don't consider the padding to serve any purpose.
On the other hand the case I'm using while I wait for the leather case is from Brando,
http://shop.brando.com.hk/bwsiliconecase_details.php?id=49
Simply put the unit in your pocket with the screen facing inward.
Click to expand...
Click to collapse
I will contact the supplier to see how much the case would be without the padding. Anything, which makes the case a little slimmer helps - specially for that price.
Btw, is it cumbersome to put the silicon case on and off? I was thinking about the silicone case but I would have to put the device out of the case every day (for charging in desktop cradle and car mount, etc) and dont want o fiddle with this each day. Way easier to simply slight it into a case.
Changes to the case were US$10.
With respect to the Brando case...seconds. The problem is really related to the material's affinity for dust. Drop it in your pockets and you would be amazed as to the mount of crud it picks up. It wipes off with a microfiber cloth or cleans up with water.
Craic Dub said:
I will contact the supplier to see how much the case would be without the padding. Anything, which makes the case a little slimmer helps - specially for that price.
Btw, is it cumbersome to put the silicon case on and off? I was thinking about the silicone case but I would have to put the device out of the case every day (for charging in desktop cradle and car mount, etc) and dont want o fiddle with this each day. Way easier to simply slight it into a case.
Click to expand...
Click to collapse
got a brando silicone skin and it tore in the corner of the screen where it is thin. It also had a spot on the keypad that was thicker making it look like a black dot and not transparent. I found it to fit very well, but was a little thick, felt like a Wizard when holding it. Dust isn't too bad if you're not a dirtbag.
got a brando silicone skin and it tore in the corner of the screen where it is thin. It also had a spot on the keypad that was thicker making it look like a black dot and not transparent. I found it to fit very well, but was a little thick, felt like a Wizard when holding it. Dust isn't too bad if you're not a dirtbag.
Craic Dub said:
thulsey said:
I immediately went out and bought a gel skin made for the Prophet. Adds nothing to the weight/size/form-factor of the device.
Of course, these are in cell phone shops all over Asia, don't know about other countries.
I've found many people on the street using these skins instead of cases just because of the form-factor element. It's a shame to ruin such portability and, dare I say, elegance, to protect it.
Click to expand...
Click to collapse
That is the reason why I really think that a protecting case is necessary (in case the device falls that is) - specially for a $600 device.
On the flip side, adding unnecessary bulk to a device which was purchased due to its slim form factor is kind of contradicting. Thus, I am searching for a very slim case, which still provides protection.
thulsey, which silicon case are you using? Have you heard of Skintight cases from Pamwarelabs http://www.palmwarelabs.com/Products/ProdList.aspx?CateID=36 ?
Click to expand...
Click to collapse
The one I'm using is very similar to the one from Palmwarelabs. It even has raised icons on each of the buttons so you can (sort of) feel what you're pressing. I think it's a local brand here in Taiwan, but I'll look into it and see if I can find it on the web.
When I was searching, I noticed that there are several different thicknesses of silicone, and various levels of craftsmanship that go into cutting things out (like the screen area, infrared port, etc.)
Get the flexskin from www.boxwave.com!!
You won't be dissapointed!
Hey...
Aluminium cases anyone???
vsc said:
You might find the following case suitable. I believe it adds the least volume to the unit given that it is conformal and very thin. (There might be something better, but I'm not aware of it.)
http://www.ebcases.com/Detail.bok?no=3331
There is also the possibility to customize the case as well for a fee. Thus one can ask the supplier to minimize thickness rather than providing the maximal protection to the unit.
Click to expand...
Click to collapse
hey vsc, I talked to EBCases today and they said that the case for the Jam wont fit the Jamin due to different button arrangements.
According to EBCases' customer service agent (very friendly and helpful!), they are working on a new case right now, which will then fit the Jamin. The new case would probably take another 4 weeks in order to be released.
I might just wait for this new case, since their case really is the best I have seen so far (and I have looked at a lot of them).
hi ,
actually i want to repair my right cover hinge of XDA o2 Exec.
its screws were pulled out forcefully internaly , last year, i donot know how.
so i packed universal back , after year i thought to use it ..
i tried to insert screws in universal by opening it taking help from HTC universal manual but the holes in hinge is free that screws donot fix in it.
what i should do . plz help me to repair , i even spread thread around so that it may fix in hing's hole but problem not solved...
these are the pictures.. in these picture one screw is inserted how much free hole can support it. otherwise hinge would have been easily seems lifted or attached by wire only , no other support
shanalikhan said:
hi ,
actually i want to repair my right cover hinge of XDA o2 Exec.
its screws were pulled out forcefully internaly , last year, i donot know how.
so i packed universal back , after year i thought to use it ..
i tried to insert screws in universal by opening it taking help from HTC universal manual but the holes in hinge is free that screws donot fix in it.
what i should do . plz help me to repair , i even spread thread around so that it may fix in hing's hole but problem not solved...
these are the pictures.. in these picture one screw is inserted how much free hole can support it. otherwise hinge would have been easily seems lifted or attached by wire only , no other support
Click to expand...
Click to collapse
hey ?? help me , my xda is opened since 2 days.... in my table , waiting for XDA developers to help me
Can you put some glue into the thread so there is something 'solid' to screw into?
Otherwise it may be buying another housing. One of the cheapest ways could be by buying a broken Uni (eg broken screen) off ebay with that has a case which is in good condition.
-Jonny- said:
Can you put some glue into the thread so there is something 'solid' to screw into?
Otherwise it may be buying another housing. One of the cheapest ways could be by buying a broken Uni (eg broken screen) off ebay with that has a case which is in good condition.
Click to expand...
Click to collapse
i inserted glue b4 opening, but it did only work for a fortnight , yeah i am thinkin to insert deposi which is used to join metals , screws and body..
Hi Guys,
I ordered one of these and it arrived this morning, A500 fits in snug as a bug in a rug!
Quality is really impressive, and all the cut out slots for ports are in the right place.
http://www.amazon.co.uk/Navitech-Ex...K9WE/ref=sr_1_3?ie=UTF8&qid=1306931117&sr=8-3
£14.99 So I think is the cheapest fitted case around? Thought I would share for all!
Dan
Could you post a couple of pics? I was thinking of getting this, but the two photos they have of it on amazon don't seem to be of the same case. Also it looks like they flipped the second one cause the back camemra is on the wrong side.
Edit:
Actualy after comparing the front shot is of the PDair BX2 and the back shot is of the PDair BX1 that has been flipped and had the PDair logo Photoshopped out.
Sent from my A500 using XDA Premium App
are the 16mb and 32mb tabs the same
external dimensions?
secularhuman said:
external dimensions?
Click to expand...
Click to collapse
16gb and 32gb are identical in size -
height - 260mm (10.24 inches)
width - 177mm (6.97 inches)
thickness - 13.3 mm (.53 inches)
Hope it helps!
Does this case provide access to the SD card slot without removing the Tab from the case. I have the Acer case, which is a very snug fit making swapping sdhc cards a lot more of a pain than I like to suffer (which is none at all really
Dave
davmyc said:
Does this case provide access to the SD card slot without removing the Tab from the case. I have the Acer case, which is a very snug fit making swapping sdhc cards a lot more of a pain than I like to suffer (which is none at all really
Dave
Click to expand...
Click to collapse
Hi there...
I have this case as well.
No. You'd have to remove the unit from the case to access the micro sd card.
the other thing that is not great about the case (which I'm going to modify) is that the leather around the bezel actually covers the edge of the screen, not just the border...it's a little smaller than I'd like. Why?
If you use the stock Android Browser, there is a great feature - Quick Controls - that allow you to slide your finger from off the screen onto the screen and bring up browser coltrols exactly where you need them. SUPER trick and very easy...
..and this case does not allow you to use this feature...
So, yeah. Modifications coming. When done I will post pics...Hopefully by the time I buy the perfect follow up case, they have thought of these things...
got mine today, shipping only took 1 week
Nicely built. Split keyboard still easy to use. Looks very smart.
It does allow the tablet to
slide down a little so the rfcamera gets covered up, bot a little surgery will fix that. If you use it upsidedown,
it doesnt slide down enuf to over the camera or the keys at thr screen bottom.
Secular
so...which one of the two different photo is????
Navitech case review
After having this case for over a week, I'm noticing a few things that are beginning to make me shop for another case...
1) The flap that tucks under the A500 to hold it in place has no real fastener so the more I use it, the more it is loosening up and the more it wants to slide down making the camera useless in the case.
2) The more I use it, the more the cheap leather (or..whatever it is...) is loosening up and is getting a bit..baggy around the screen.
3) I truly wish it had 1/8 of an inch more around the screen area to be able to use the gestures with the stock browser because I LOVE the way they work.
At this point, I'm probably going to start modifying it so it serves it's protection purpose until I get the next case. I am already starting to shop...
If you can live with these issues, by all means go ahead and get one - overall it's not that bad if you are willing to do a few mods to it...But be forewarned. You are getting what you pay for at this price...
try upside down for item one
1) The flap that tucks under the A500 to hold it in place has no real fastener so the more I use it, the more it is loosening up and the more it wants to slide down making the camera useless in the case.
most progrms and b
rowsers allow upside down operation.
secularhuman said:
1) The flap that tucks under the A500 to hold it in place has no real fastener so the more I use it, the more it is loosening up and the more it wants to slide down making the camera useless in the case.
most progrms and b
rowsers allow upside down operation.
Click to expand...
Click to collapse
...and? there's ONE hole in the border / frame of the case that is JUST big enough to see the front camera when it's in the perfect position. If the camera is not lined up with that hole - no workie...
Also, if you put the unit in upside down, not only does the FRONT camera not work, but the camera on the back, the speakers, and the jack for the dock are covered as well. Also no workie...
Also does not address the loosening up of the flap issue..I've only had it a week and ALREADY it's pretty loose and allows the unit to slide Very Easily inside the case...
Ummm...Do you work for Navitech by any chance?
no I dont work for them
Ummm...Do you work for Navitech by any chance? [/QUOTE]
no but I have one. when upsidedn the rfc works as do the speakers, the ffc no.
maybe some velcro would be an easy fix.
secular
the acer branded case also slides a great bit after a short time, but it is a very thin material that provides almost no drop protection.
At least this is leather ....
The case from navitech is half the price of the Acer case and is way better. The Acer case isn't only rubber, but seriously rubbish. I used doublesided tape for the flap of the navitech, the tab doesn't slide anymore
Thanks for the idea
gerke said:
The case from navitech is half the price of the Acer case and is way better. The Acer case isn't only rubber, but seriously rubbish. I used doublesided tape for the flap of the navitech, the tab doesn't slide anymore
Click to expand...
Click to collapse
The double sided tape works great!
Secular
I have had this case for 2 weeks and loving it so far. Great fit.
The flap that holds thetablet snug did get loose as people mentioned. Iused a 2x1 inch piece of industrial velcro to creat a latch. Works like a champ and i can remove the tab when needed.
I've had this case on order from amazon.com (U.S.) and so far although they claim they shipped it June 6 I've seen no sign of it. No tracking info was provided. After contacting them through Amazon, I got a response stating that they had had trouble with shipments to the U.S., and in exchange for refunding my shipping fee they asked I wait another week.
Waiting, but not impressed (with Navitech) so far.
I had a problem with my shipment as well. They've asked me to wait a week longer and they (because the shipment never came) asked if I want a new product or a refund.
I asked for a new product and they sent it today via first class airmail.
It's not their fault that post offices keep losing shipments. Actually we're both unhappy. They had to ship two products instead of one and I had to wait a month for it.
C'est la vie
Well mine finally showed up today. Battered and dirty in a big mailing folder not a box. The case doesn't seem any worse for the trip it had taken, and my A500 is having a nap in it right now.
The flap that tucks under it to hold it in the case is very soft leather and doesn't keep the tablet from slipping a little up or down. Still, this case should be find to carry my A500 out and about in and keep me from worrying about scratching the thing.
Hey so somehow I've completely lost the little pin that comes with the device :crying:
There's none for sale yet (not surprising as it's so new, only seem to be iphone ones but i'm not sure if they're the right fit).
I've used a pin but it feels very bad using it as it's so sharp I think it may damage the mechanism if I use it too many times.
What are viable alternatives to the SIM pin tool?
I doubt a pin would cause any real damage as long add you're careful.
Sent from my Nexus 4 using Tapatalk 2
just shoot the device with a .45 itll open up....
Small pin probably best bet
Paperclip?
Sent from my Nexus 4
Clip the end of a pin off with wire cutters?
Paperclip.
Yeah I guess I have no other choice than paperclip/blunted pin. Just difficult trying to find one the exact size/fit. Oh well, it may turn up in 6 months down the line like most 'lost' things do!
Cheers
staple worked for me
A paperclip was too thick to fit into the hole when I tried it. (Wasn't one of the oversize ones, either, just a standard clip.) A dental pick worked, though.
toothpick should probably work
A small and pointy penis.
666fff said:
A small and pointy penis.
Click to expand...
Click to collapse
I'd ask to borrow yours because it will fit nicely, but I don't want to give my phone AIDS.
Sent from my Nexus 4 using Tapatalk 2
I can't believe there's a two page thread dedicated to helping you find something to stick in your hole.
Your phone has an immune system?
:0
Heat a pin and bend it so it is easy to hold and use a file to make the tip of the pin dull. Now you have a SIM removal tool.
Safety pin, or really thin needle. I think this is as big as the slot on iPhone's and that's how I always did it.
I used a staple just now... works great once you get a good grip and press straight down firmly.
i used a toothpick and it worked fine