im buying the pro version today, and i want to know the compatibility of roms with this device. (diferent snapdragon cpu version)
did any1 try to flash the new device with the custom roms from the original development section?
I just wish to have miui on it
cnv17 said:
im buying the pro version today, and i want to know the compatibility of roms with this device. (diferent snapdragon cpu version)
did any1 try to flash the new device with the custom roms from the original development section?
I just wish to have miui on it
Click to expand...
Click to collapse
+1 here
u8800pro also have BCM4329 wifi solution instead of qualcomm libra one
I have one. I tryed to flash it with official rom and I bricked it. It was my fault. Now I can't recover it. Any suggestions? In every mode it vibrates and nothing happens. Purple screen doesn't work, recovery mode doesn't work, flashing mode doesn't work.
dexxxterito said:
Purple screen doesn't work.
Click to expand...
Click to collapse
without pink mode u f***ed up
dexxxterito said:
I have one. I tryed to flash it with official rom and I bricked it. It was my fault. Now I can't recover it. Any suggestions? In every mode it vibrates and nothing happens. Purple screen doesn't work, recovery mode doesn't work, flashing mode doesn't work.
Click to expand...
Click to collapse
i had bricked mine also. i live in russia but im not russian hardly i could find a tech service coz i cant speak russian. they are going to run jtag on my phone they were asking for rom or something like that. finally i have found a u8800 pro rom on xda. tomorrow i'll se what will happen. and i can share all my experince with it
edit: the guy who was going to run jtag on my phone in moscow now and he'll be back only on 11th of december.. unfortunatelly i'll wait or i'll try to contact with an official service center in other cities. the problem is i can not find any official service center even in other cities
I can access to the pink screen, but i don't have the image folder... can somebody help me?? i have a big problem if i cant fix it.. it reboots every 80 seconds with the unfinished root image file.. if someone can give me the original one for 2.3.5 pleeeeaaaseee send i to [email protected] i really need it, im having a hard time trying to fix it.. help..!
You need different ROMs compared to u8800, as some people discovered (rather painfully). So far, there are 4 ROM options. Stock ROM options include the stock 2.2, the stock 2.3 (no problems as with the 2.3 for the u8800), however they both suck performance wise.
Then there's a MIUI port which I couldn't even get to install on my device and finally comes cyanogenmod which is the best option so far and the one I'd recommend (you will see a tremendous difference in the performance of the UI).
Related
Hi Guys,
Im new on the Android World. I have a new Motorola Milestone 2 from the Claro Company in Argentina with the Android 2.2 with motoblur. Somebody told me an Android update should increase the performance of my phone, but Claro wont offer me any update for the moment.
Doing some research I realized that I can perform my own "UNOFFICIAL" update porting these "customized" roms. Here is where Im a litle lost.
I have red a lot of info and a lot of different ways to flash the phone and port a new rom. So, I kindly ask you to give me some guidance on this. Here are my questions:
How can I upgrade mi Android?
Which is the correct procedure?
Which ROM to use for mi Milestone 2?
I have red some post of users that bricked their phones during the process. Is this real? Can I loose my phone doing this?
I would really appreciate your help with this.
Thanks a lot.
every rom have diferent procedure.
you can try this rom
http://forum.xda-developers.com/showthread.php?t=1216705
i tested 5 diferent rom and don't bricked my phone. If you have full batery always when phone don't boot you can flash stock android via rsd.
Every time when i change 2.2.2 to 2.3.4/5 i have gsm problem but this http://forum.xda-developers.com/showthread.php?t=1182050
everytime solved it
Thanks!
Thanks for the info, I am trying different roms now.
There are currently 3 roms in development session!
I recommend CM7. great
Does CM7 fix crap like the keyboard double-press and the multitouch bug?
crazyteknohed said:
Does CM7 fix crap like the keyboard double-press and the multitouch bug?
Click to expand...
Click to collapse
Double pressing can be fixed without flashing a ROM. Search the forum, there is a fix.
For multitouch there is a Defy multitouch app.
I'm new to this forum but have got solutions for many of my questions from here. I own a Motorola defy MB525 (SOC Camera), tried to fiddle around with it in order to install custom ROM's and eventually screwed up in the process .After my failed attempts, was able to somehow get a working Indian Motorola Froyo SBF and fix my phone, which was otherwise not booting, that was a small victory . In the meanwhile, had been to Motorola Service Center to replace my broken glass. Got that replaced, however I wondered if the service center could somehow update it with official Defy+ ROM and that's when I screwed up completely.
They updated it with official 2.3.6 Defy+ ROM and now my Camera module is dead , battery lasts hardly for 5-6 hrs on stand by :crying: , which would otherwise last for 2 days on foryo and my phone model shows MB526. I wouldn't worry about the camera right now, but I want my battery last for a day atleast
Is there a way I can go back to my original froyo ROM which I doubt would be possible
Can someone help me on this ? any patch that I could update for battery issues? anything at all !
Thanks in advance.
Have you tried flashing the original SBF with RSD Lite?
RSD Lite is an App used by Motorola to Flash Smartphones. It can revive mismatched Nandroid/Fixed SBFs, Black Screens, failed flashes etc.
Even though is really, really hard to completely brick a Defy, it is possible; a corrupted SBF, power failure on a critical part of the formatting, or some weird issues while creating partitions can lead to a Bricked Defy. If you can, always flash your Defy from a laptop so the power is not an issue, use good cables, and be sure the PC doesn’t go to sleep when is not being used.
Also, when flashing SBFs, is normally advised to put your SBF in your PC Root directory (C:/ ) or whatever it is in your PC and rename it to a short name like Defy.sbf, why? Because sometimes the Path name is just too long and RSD Lite throws errors not allowing the phone to be Flashed.
Click to expand...
Click to collapse
Refer to this thread for details.
snandakishore said:
Can someone help me on this ? any patch that I could update for battery issues? anything at all !
Thanks in advance.
Click to expand...
Click to collapse
Dont worry....you will get back everything...but first i guess you will have to downgrade your defy....
may be this link would help
http://forum.xda-developers.com/showthread.php?t=1825064
Hope it works for you....flash only the correct sbf (Froyo one) and everything will be fine....
itsnotmeatall said:
Have you tried flashing the original SBF with RSD Lite?
Refer to this thread for details.
Click to expand...
Click to collapse
Yes, I have tried the same Froyo SBF that I tried to flash before using RSD Lite, but it didn't succeed this time. Later I tried many Defy+ ROM's aswell, nothing worked ... put a lot of effort to do all that and got fed up. Went back to the service center and they re-flashed it with their Defy+ ROM using RSD Netconnect which is something they use to flash the ROM's. May be this works a bit differently. It worked this time... now I'm stuck with this ROM, which drains my battery like anything and rendered my camera dead.
Well...thanks anywazz will try the steps suggested by the other mate...
Ok Simple Steps to Recover & Get ur camera working
snandakishore said:
Yes, I have tried the same Froyo SBF that I tried to flash before using RSD Lite, but it didn't succeed this time. Later I tried many Defy+ ROM's aswell, nothing worked ... put a lot of effort to do all that and got fed up. Went back to the service center and they re-flashed it with their Defy+ ROM using RSD Netconnect which is something they use to flash the ROM's. May be this works a bit differently. It worked this time... now I'm stuck with this ROM, which drains my battery like anything and rendered my camera dead.
Well...thanks anywazz will try the steps suggested by the other mate...
Click to expand...
Click to collapse
Dude I went from the steps in which u are currently stuck.
My defy 525 was not booting hence i went to authorized service center, Vashi, Navi Mumbai & Engineer over there has flashed defy plus rom on my mb 525. My camera was dead for 2 months. Now you are on BL7. Talk enough here are the steps...
Step 1:- Root your Defy, link is as below for BL7 ROOTING..
http://forum.xda-developers.com/showthread.php?t=1595013
Step 2 :- Flash any 2nd Boot Defy Custom Rom ( Quarks (cm10) / Epsys (cm 9 & cm7 ) / Kayants( cm10)
By the way I use Epsy 2nd boot for CM7**( ONLY WIFI IS NOT WORKING OTHERWISE ITS STABLE ROM )
WWW.DEFY-CM.NET
Use 26112012 rom
Thats the only way to your defy to use with camera. ** Camera will work only on 2nd boot rom
In case additional help is required then let me know..
Happy to Help...
Avi Tandel, Navi Mumbai, India.
Didn't work for me
avi_tandel said:
Dude I went from the steps in which u are currently stuck.
My defy 525 was not booting hence i went to authorized service center, Vashi, Navi Mumbai & Engineer over there has flashed defy plus rom on my mb 525. My camera was dead for 2 months. Now you are on BL7. Talk enough here are the steps...
Step 1:- Root your Defy, link is as below for BL7 ROOTING..
http://forum.xda-developers.com/showthread.php?t=1595013
Step 2 :- Flash any 2nd Boot Defy Custom Rom ( Quarks (cm10) / Epsys (cm 9 & cm7 ) / Kayants( cm10)
By the way I use Epsy 2nd boot for CM7**( ONLY WIFI IS NOT WORKING OTHERWISE ITS STABLE ROM )
WWW.DEFY-CM.NET
Use 26112012 rom
Thats the only way to your defy to use with camera. ** Camera will work only on 2nd boot rom
In case additional help is required then let me know..
Happy to Help...
Avi Tandel, Navi Mumbai, India.
Click to expand...
Click to collapse
Bro, Thanks a lot I see a ray of hope again
...I was able to root my device, somehow I was unable to flash the first file mentioned on link you gave but was able to flash the second one,still I could see that the device was rooted inspite of that.
Now, please help me with detailed instructions on how to go about flashing the new ROM with some youtube Video references will also help. Also what about the battery life ? have you been able to get a decent battery life after flashing the new ROM ? and will I be able to flash ROM's meant for MB525 or should I choose only ones meant for MB526 ? If so, then will it still drain my battery bcoz it will contain a GB kernel ? Will my device ever be same again?
Also, you have mentioned that ur wifi isn't working on the ROM that you are running, is it specific to that ROM ?
Plz dnt mind, I have asked too many questions.. I'm not well versed with all this....still learning from my mistakes.
Solved !
snandakishore said:
Bro, Thanks a lot I see a ray of hope again
...I was able to root my device, somehow I was unable to flash the first file mentioned on link you gave but was able to flash the second one,still I could see that the device was rooted inspite of that.
Now, please help me with detailed instructions on how to go about flashing the new ROM with some youtube Video references will also help. Also what about the battery life ? have you been able to get a decent battery life after flashing the new ROM ? and will I be able to flash ROM's meant for MB525 or should I choose only ones meant for MB526 ? If so, then will it still drain my battery bcoz it will contain a GB kernel ? Will my device ever be same again?
Also, you have mentioned that ur wifi isn't working on the ROM that you are running, is it specific to that ROM ?
Plz dnt mind, I have asked too many questions.. I'm not well versed with all this....still learning from my mistakes.
Click to expand...
Click to collapse
This thread can be closed.. I was able to successfully port to CM10 2nd boot Quarx ROM.
Thanks a lot for all the support !! long live XDA
Hi my phone (LG Optimus L3) has Android 2.3.6 I want to upgrade it to a newer version (3.5 or higher). Is this phone able to use higher versions of Android ? is it safe just to update the OS in the phone, if something will went wrong how can I reinstall the old version, that manufacture has installed ?
Tatevik said:
Hi my phone (LG Optimus L3) has Android 2.3.6 I want to upgrade it to a newer version (3.5 or higher). Is this phone able to use higher versions of Android ? is it safe just to update the OS in the phone, if something will went wrong how can I reinstall the old version, that manufacture has installed ?
Click to expand...
Click to collapse
Ill be straight to the point.. most of us have been using cm9 which is ics 4.0.0 since august 2012,each week, well sometimes every two weeks, since they are missing weeks. Cm9 is a nightly, which means there are bugs and issues, since teh rom is not stable. However, most of the problems have been fix and I have had not had any real issues with it, I do use it day to day, till a new custom rom (based off a previous cm9 nightly release) comes out that I want to try. but the roms has come a long way since build 1.
If something went wrong? like you bricked your phone. There is two ways.. create a back up in cwm before you flash cm9... or you can used kdz, which is used to recovery your phone if your brick it or you want to upgrade or download your firmware.
Also please give me more info about your phone. Like what baseband you are using, what country etc.
Also there are some stock custom roms, which are modified version of stock (2.3.6). With features like 1000 GHz overclock,new launcher,file manager and other useful tweaks/mods
FlowUK said:
Ill be straight to the point.. most of us have been using cm9 which is ics 4.0.0 since august 2012,each week, well sometimes every two weeks, since they are missing weeks. Cm9 is a nightly, which means there are bugs and issues, since teh rom is not stable. However, most of the problems have been fix and I have had not had any real issues with it, I do use it day to day, till a new custom rom (based off a previous cm9 nightly release) comes out that I want to try. but the roms has come a long way since build 1.
If something went wrong? like you bricked your phone. There is two ways.. create a back up in cwm before you flash cm9... or you can used kdz, which is used to recovery your phone if your brick it or you want to upgrade or download your firmware.
Also please give me more info about your phone. Like what baseband you are using, what country etc.
Also there are some stock custom roms, which are modified version of stock (2.3.6). With features like 1000 GHz overclock,new launcher,file manager and other useful tweaks/mods
Click to expand...
Click to collapse
__________________________________________________________________
I bought the phone from Dubai but I leave in Armenia, what is baseband ? and I read that if I insert and iternal SD card to increase the phones memory, it will not help me, as I will be able only to transfer photos and music, so I have to root my phone, do you think It is ok to do for this phone ?
Thanks
Baseband
FlowUK said:
Ill be straight to the point.. most of us have been using cm9 which is ics 4.0.0 since august 2012,each week, well sometimes every two weeks, since they are missing weeks. Cm9 is a nightly, which means there are bugs and issues, since teh rom is not stable. However, most of the problems have been fix and I have had not had any real issues with it, I do use it day to day, till a new custom rom (based off a previous cm9 nightly release) comes out that I want to try. but the roms has come a long way since build 1.
If something went wrong? like you bricked your phone. There is two ways.. create a back up in cwm before you flash cm9... or you can used kdz, which is used to recovery your phone if your brick it or you want to upgrade or download your firmware.
Also please give me more info about your phone. Like what baseband you are using, what country etc.
Also there are some stock custom roms, which are modified version of stock (2.3.6). With features like 1000 GHz overclock,new launcher,file manager and other useful tweaks/mods[/QUOT
------------------------------------------------------------------------------------------
The baseband is MSM7225A-1-AA
Click to expand...
Click to collapse
Tatevik said:
FlowUK said:
Ill be straight to the point.. most of us have been using cm9 which is ics 4.0.0 since august 2012,each week, well sometimes every two weeks, since they are missing weeks. Cm9 is a nightly, which means there are bugs and issues, since teh rom is not stable. However, most of the problems have been fix and I have had not had any real issues with it, I do use it day to day, till a new custom rom (based off a previous cm9 nightly release) comes out that I want to try. but the roms has come a long way since build 1.
If something went wrong? like you bricked your phone. There is two ways.. create a back up in cwm before you flash cm9... or you can used kdz, which is used to recovery your phone if your brick it or you want to upgrade or download your firmware.
Also please give me more info about your phone. Like what baseband you are using, what country etc.
Also there are some stock custom roms, which are modified version of stock (2.3.6). With features like 1000 GHz overclock,new launcher,file manager and other useful tweaks/mods[/QUOT
------------------------------------------------------------------------------------------
The baseband is MSM7225A-1-AA
Click to expand...
Click to collapse
Kernel 2.6.38.6-perf
Software V10g-Sep-14-2012
Click to expand...
Click to collapse
Tatevik said:
__________________________________________________________________
I bought the phone from Dubai but I leave in Armenia, what is baseband ? and I read that if I insert and iternal SD card to increase the phones memory, it will not help me, as I will be able only to transfer photos and music, so I have to root my phone, do you think It is ok to do for this phone ?
Thanks
Click to expand...
Click to collapse
. Are you taking about using the SDMerg Mod to increased your memory? I dont have a problem with it, I can transfer video,music and images to my phone... as well as apk files.
Tatevik said:
Tatevik said:
Kernel 2.6.38.6-perf
Software V10g-Sep-14-2012
Click to expand...
Click to collapse
Upgrade to the latest firmware using the Lg firmware site. Also make sure you do a back up when you install cmw, before you flash cm9. Also you might want to download the 1GHz Kernel, even if you dont plan to overclock, it will get rid of the battery bug on start up.
Click to expand...
Click to collapse
I'm buying this tablet later today off of Lenovo's website, but I've looked at the custom ROM it comes with and I don't think I like it very much. I've noticed that there are no other ROM's available for this tablet so I want to try and port CyanogenMod .
I've never flashed a custom ROM before but I have rooted many devices many times. I was wondering if anyone has either ported an CM build for this device or if anyone knows if its very risky to port and flash my own build. Thanks in advanced!
We have the bios / bootloader locked. Today I ruined my 830F trying to replace the bios (capsule.bin)
Are out of the game..
if you want to help, maybe I can help you .I am a official forum moderator of lenovo in China.
Sent from my YOGA Tablet 2-830F using XDA Free mobile app
bodivas said:
We have the bios / bootloader locked. Today I ruined my 830F trying to replace the bios (capsule.bin)
Are out of the game..
Click to expand...
Click to collapse
Man that really sucks, I guess I wont buy it than. Also I'm waiting for my Lenovo Z510 to get repaired first now, it just stopped turning on so Ill see how that goes.
So there will never be a custom rom for this devices?
Hello Everyone
Since the G901F Model has only few Roms , thanks to @fawadshah33 we finally are able to port roms from Note 4 device ( 910F ) anyway i was trying to port this Rom : http://forum.xda-developers.com/note-4/snapdragon-dev/norma-n7-port-910g-f-t3458481 i replaced the boot.img with the stock MM of the G901F device , then flashed the rom and after used the MM auto-porter that @fawadshah33 provided and restarted the device
For a second i felt happy when i saw the boot animation then after like 5 seconds the animation stopped , the device vibrated then the screen become black and it was stuck there
I really need the help of expert devs to at least tell me this problem is from what exactly , usually if there is a problem the rom don't boot at all but this one boots for around 5 seconds then the screen turn to black and the device vibrate
i really appreciate your help guys and thank you in advance
Hedi.Karray said:
Hello Everyone
Since the G901F Model has only few Roms , thanks to @fawadshah33 we finally are able to port roms from Note 4 device ( 910F ) anyway i was trying to port this Rom : http://forum.xda-developers.com/note-4/snapdragon-dev/norma-n7-port-910g-f-t3458481 i replaced the boot.img with the stock MM of the G901F device , then flashed the rom and after used the MM auto-porter that @fawadshah33 provided and restarted the device
For a second i felt happy when i saw the boot animation then after like 5 seconds the animation stopped , the device vibrated then the screen become black and it was stuck there
I really need the help of expert devs to at least tell me this problem is from what exactly , usually if there is a problem the rom don't boot at all but this one boots for around 5 seconds then the screen turn to black and the device vibrate
i really appreciate your help guys and thank you in advance
Click to expand...
Click to collapse
So does your device still boot to download mode or odin mode?
Jaistah said:
So does your device still boot to download mode or odin mode?
Click to expand...
Click to collapse
YES the device boot normally to everything , Download Mode and even Recovery
you can't port "n7 for n4" rom for s5 using auto port, if you can then so many n7 port rom are available now, you just can auto port any "s7,n5 for n4" for s5 for now
tavatien86 said:
you can't port "n7 for n4" rom for s5 using auto port, if you can then so many n7 port rom are available now, you just can auto port any "s7,n5 for n4" for s5 for now
Click to expand...
Click to collapse
understood , so its impossible for now i should stop trying ?
and i can for sure port "s7,n5 for n4" for s5 ??
Hedi.Karray said:
understood , so its impossible for now i should stop trying ?
and i can for sure port "s7,n5 for n4" for s5 ??
Click to expand...
Click to collapse
not sure 100% for all but some rom like "dr.ketan", "noble", "s7e for n9100(china forum)" that you can using auto port now, those 3 rom i think would be the best port for now, other than that if you want note7 port rom you need a custom kernel to boot up
tavatien86 said:
not sure 100% for all but some rom like "dr.ketan", "noble", "s7e for n9100(china forum)" that you can using auto port now, those 3 rom i think would be the best port for now, other than that if you want note7 port rom you need a custom kernel to boot up
Click to expand...
Click to collapse
actually i'm now downloading the ''DR.Ketan'' rom hoping that porting will work , so thank you for confirming it , and i will look for that S7e one , and since you clearly knows a lot that i dont , can you try to explain briefly why we need another kernel for the Note 7 roms ?
Hedi.Karray said:
actually i'm now downloading the ''DR.Ketan'' rom hoping that porting will work , so thank you for confirming it , and i will look for that S7e one , and since you clearly knows a lot that i dont , can you try to explain briefly why we need another kernel for the Note 7 roms ?
Click to expand...
Click to collapse
i just like you i'm just a user not a developer so not sure about anything, since there are no developer for g901 and g906 now we can't kown exactly what wrong with port rom, i try 2 rom from 1 developer in china forum, he use 1 kernel(i see in image that is stock kernel) for both of them, the "s7e for n4" rom can auto port for our s5 but the n7 rom can't, so i'm not sure that about kernel, all i know that all the n7 rom port for "normal s5(g900)" using custom kernel
tavatien86 said:
i just like you i'm just a user not a developer so not sure about anything, since there are no developer for g901 and g906 now we can't kown exactly what wrong with port rom, i try 2 rom from 1 developer in china forum, he use 1 kernel(i see in image that is stock kernel) for both of them, the "s7e for n4" rom can auto port for our s5 but the n7 rom can't, so i'm not sure that about kernel, all i know that all the n7 rom port for "normal s5(g900)" using custom kernel
Click to expand...
Click to collapse
understood , so can you give me the links to those 2 roms that works on the G091F ? cuz i searched all the net looking for roms for that device but i didnt succeed
Hedi.Karray said:
understood , so can you give me the links to those 2 roms that works on the G091F ? cuz i searched all the net looking for roms for that device but i didnt succeed
Click to expand...
Click to collapse
i think that you should use dr.ketan for now because that rom fully english, the rom in china forum has some modify that you can't change it to english easy, but if you want to test then here you are, try some rom if you want and remember n7 port never work for now, other that aurora like v9 not work too, you can test some rom and post here what rom work so everybody can use
http://bbs.gfan.com/forum.php?mod=forumdisplay&fid=1545&page=1&filter=typeid&typeid=11661
you can try "s7e v2" by S5feng that rom can boot up, remember to using auto port too
oh and onething the developer make that auto port from the first 6.0 base so if you in higher base you need to use odin to get back the first 6.0 base of your divice
tavatien86 said:
i think that you should use dr.ketan for now because that rom fully english, the rom in china forum has some modify that you can't change it to english easy, but if you want to test then here you are, try some rom if you want and remember n7 port never work for now, other that aurora like v9 not work too, you can test some rom and post here what rom work so everybody can use
http://bbs.gfan.com/forum.php?mod=forumdisplay&fid=1545&page=1&filter=typeid&typeid=11661
you can try "s7e v2" by S5feng that rom can boot up, remember to using auto port too
oh and onething the developer make that auto port from the first 6.0 base so if you in higher base you need to use odin to get back the first 6.0 base of your divice
Click to expand...
Click to collapse
i didnt understand your last line , i'am now on Stock last rom realesed ''G901FXXU1CPF6_G901FPHN1CPF2_G901FXXU1CPH3_HOME.tar'' do i need to flash other modem and bootloader than that ?
Hedi.Karray said:
i didnt understand your last line , i'am now on Stock last rom realesed ''G901FXXU1CPF6_G901FPHN1CPF2_G901FXXU1CPH3_HOME.tar'' do i need to flash other modem and bootloader than that ?
Click to expand...
Click to collapse
it mean if you in higher base you can't use that auto port perfectly, if you read all 5 page of auto port thread you can see the guy make auto port for higher base rom said it may have some bug so if you want using auto port without any issue you need to get back the lowest 6.0 base
tavatien86 said:
it mean if you in higher base you can't use that auto port perfectly, if you read all 5 page of auto port thread you can see the guy make auto port for higher base rom said it may have some bug so if you want using auto port without any issue you need to get back the lowest 6.0 base
Click to expand...
Click to collapse
if iam on higher base the rom wont boot at all ? or it will boot with problems ?
Hedi.Karray said:
if iam on higher base the rom wont boot at all ? or it will boot with problems ?
Click to expand...
Click to collapse
i don't know, as he said the rom still can boot but he have issue with calling that he can't hear any voice, i never try in higher base before, and if you in higher base and still want to port you need to make a new auto port because the auto port in #1 using every file from lowest 6.0 base
tavatien86 said:
i don't know, as he said the rom still can boot but he have issue with calling that he can't hear any voice, i never try in higher base before, and if you in higher base and still want to port you need to make a new auto port because the auto port in #1 using every file from lowest 6.0 base
Click to expand...
Click to collapse
i just flashed DR.Ketan rom and after it flashed the MM-N4-AutoPorter-for-G906x_G901F.zip and rebooted but the device didnt want to boot , i start to see the boot animation then it restart .. so i flashed another file : Port_G901F_from_G906_K-L-S__FawadShah.zip , and with that file the device didnt reboot it continued booting to rom i waited around 10 minutes then the phone start to vibrate softly after every single 30 seconds
Conlusion : the rom didnt boot i dont know why
Hedi.Karray said:
i just flashed DR.Ketan rom and after it flashed the MM-N4-AutoPorter-for-G906x_G901F.zip and rebooted but the device didnt want to boot , i start to see the boot animation then it restart .. so i flashed another file : Port_G901F_from_G906_K-L-S__FawadShah.zip , and with that file the device didnt reboot it continued booting to rom i waited around 10 minutes then the phone start to vibrate softly after every single 30 seconds
Conlusion : the rom didnt boot i dont know why
Click to expand...
Click to collapse
well as i said if you on lastest base you must build 2 new patch if you want to port, if you use 2 patch in #1 you must on the lowest base 6.0, flash rom->port_901f...->auto porter, reboot recovery after every zip, that should work