Related
Hi,
I accidentally restored NookRestore over my Nook Touch. I don't have a backup (I know, I know: I'm an idiot.).
I was trying to root my NST so I could install quickOffice or some other word processor. I'm writing a book and I just wanted to write it on this particular device since it's so convenient to write during my spare time, which is often outside in daylight.
I really don't care about reading B&N books on this device. I just need the ability to write in a word processor and transfer it to my computer.
My attempt at rooting it made it lose it's keyboard and lock up repeatedly. I was trying to write the nookRestore img onto my sd card and actidentally wrote the img onto my NST. Does anybody know how to fix this without a backup, or maybe just get a generic Android install with a word processor?
It looks like someone made the same mistake and got it fixed, but I can't post in that forum.
Here's the link to the restore img:
http://forum.xda-developers.com/showthread.php?t=1289233
Here's the link to the post where someone got it fixed:
http://forum.xda-developers.com/sho...d+nookrestore+over+my+nook+touch#post19376671
Thank you in advance!
Do not do anything more to your NST, it can still be saved if you did not try to write anything else but nookRestore onto it!
Check your PM in a few minutes.
Hi everyone. I'm a long time computer builder/hacker and am just getting into the Nook Simple Touch and rooting. I see that 1.1.2 just came out.
-Should I update to that firmware and them root?
-Will current rooting techniques work with the new firmware?
-Is it possible and easy to unroot?
Thanks in advance for your help. I have done some searching but am having trouble finding the answers and dont want to waste even more time. I hope you understand and I can't wait to get into this rooting thing!
Guyman2 said:
[...] -Should I update to that firmware and them root?
Click to expand...
Click to collapse
The update incorporates wifi fixes that can be useful if you use it on the road, or suffer a router that v1.1.0 had problems with. I'd recommend it, yes. I haven't seen any downside.
-Will current rooting techniques work with the new firmware?
Click to expand...
Click to collapse
Yes. I did a complete wipe on mine running v1.1.0, updated to v1.1.2 and used the normal TouchNooter 2.1.31 process. Everything worked exactly as it did on v1.1.0, including having to wait 24 hours for the Market to activate.
-Is it possible and easy to unroot?
Click to expand...
Click to collapse
Hmm. I had no problem wiping and reloading mine. Not sure if that constitutes a 100% unroot, but I think it does. I had no problems.
Thanks in advance for your help. I have done some searching but am having trouble finding the answers and dont want to waste even more time. I hope you understand and I can't wait to get into this rooting thing!
Click to expand...
Click to collapse
I just made a point of following Gabrial's instructions in the first post, and everything went smoothly. If you have reasonable expectations, the NST rooted is a great little device. I think you'll be pleased.
[EDIT: Since writing this, I began having problems searching in the Android Market. I rolled back to B&N v1.1.0 and re-rooted, and STILL am having that problem. I don't know why this only started recently, and I do not think it's related to v1.1.2, but I wanted to post it here as fair warning. Also, after rooting using TN, the device info screen showed 1.1.0 after having updated to 1.1.2. I'm changing my recommendation to "do it if you're having wifi issues" for now.]
Thank you for such a wonderful and detailed post. My micro SD card should be here tomorrow and I cant wait to root it. I have a gmail account but not a youtube. Is it imperative to link gmail and youtube to root this? I would post in that thread, but as a new user i have to wait for 10 posts to do that. Thanks!
Wonderful. Since I had a mishap when screwing with framework-res.apk, I am going to do a full wipe. This is cool!
Guyman2 said:
Thank you for such a wonderful and detailed post. My micro SD card should be here tomorrow and I cant wait to root it. I have a gmail account but not a youtube. Is it imperative to link gmail and youtube to root this? I would post in that thread, but as a new user i have to wait for 10 posts to do that. Thanks!
Click to expand...
Click to collapse
YouTube and Gmail are linked -- or at least can be. Go to YT in your desktop browser, and you should be able to sign in using your Gmail credentials. (Google is assimilating EVERYTHING!)
You do need to link to Google for Market functionality, so yes, you probably do need to do it in practical terms.
---------- Post added at 11:33 AM ---------- Previous post was at 11:32 AM ----------
brendan10211 said:
Wonderful. Since I had a mishap when screwing with framework-res.apk, I am going to do a full wipe. This is cool!
Click to expand...
Click to collapse
The "8 failed boot" process should let you reload the default firmware your unit shipped with if you need to get out of a bootloop situation.
Just a reminder that a FULL IMAGE BACKUP is strongly recommended before you start monkeying with too much, ideally on Day One. Unlike other NOOK devices, you can badly, if not permanently, screw up a NST if you wipe out some system information. Be sure to read through the various threads before going too far!
So I should restore my nook to factory? Will that do anything to the partitions?
brendan10211 said:
So I should restore my nook to factory? Will that do anything to the partitions?
Click to expand...
Click to collapse
If you're stuck, it's an option. My understanding is that:
The "8 failed boots" procedure will restore the firmware your NST shipped with.
The "Unregister and Wipe" procedure from settings will wipe all user data off the internal system.
I was not able to manually update from v1.1.0 to v1.1.2 if previously rooted. Not sure if that's normal, but I had a lot of cruft on my unit, so just did both procedures. Files on my uSD were untouched.
I'm following your guide and see that making a backup is recommended. I would post in that forum, but as a new user here, i am not allowed to there. they say to follow these instructions:
BACKUP/RESTORE N2E Win7
Grab a copy of Roadkil's free DiskImager for backup and restore.
and a copy of free MiniTool Partition Wizard at:
Boot nook with noogie.img : nookdevs.com/NookTouch_Rootin (the "Rooted Forever" screen) and connect to your computer via USB.
Use DiskImager to copy your Nook partition to a file, being sure to select "Physical Disk" in the drop down list.
http://forum.xda-developers.com/showthread.php?t=1142983
However when i follow this step I get to a link that doesn't work. Thus I cannot backup my nook:
Boot nook with noogie.img
Any ideas? Thanks. Again, I'd post the link that wont work but the damn forum wont let me post outside links until i do 8 more posts. This is frustrating as HELL. But you should be able to find out what my problem is from the details i am so kindly allowed to post.
Or maybe I shouldnt bother backing up, since as another user pointed out, after a few failed boots it automatically will store its original firmware. What do you guys think?
You need to be sure that you use a program to write noogie.img to an SD card (I'll post a link to one when I have time), and be sure that you do not write the image to the SD card when it is in the Nook! You need to use an external card reader. After that, you just turn your Nook off, put the SD card into your Nook, and turn the Nook on.
Thanks guys for taking time to make these posts. This should help me in figuring all this stuff out.
so do i need to root the nook BEFORE backing it up? isnt that what noogie.img does?
A quick update: There do seem to be some annoyances if using existing TouchNooter versions to root B&N 1.1.2. If you haven't already done so, and aren't suffering from the wireless issue, you might hold off a bit until the exact implications are better known.
If you've already done it, it shouldn't be the end of the world either.
---------- Post added at 10:03 AM ---------- Previous post was at 10:02 AM ----------
Guyman2 said:
so do i need to root the nook BEFORE backing it up? isnt that what noogie.img does?
Click to expand...
Click to collapse
No. Noogie just exposes the normally inaccessible NOOK partitions so you can back them up. Noogies doesn't root anything. It's recommended to make a backup of your pristine device BEFORE rooting, in case anything goes wrong.
Thanks! How do i get noogie.img? the link on the backup page doesn't work and I dont want to get the wrong version. Any idea how long it takes for the next rooting version to come out?
Guyman2 said:
Thanks! How do i get noogie.img? the link on the backup page doesn't work and I dont want to get the wrong version. Any idea how long it takes for the next rooting version to come out?
Click to expand...
Click to collapse
It does look like the download link to noogie.img.gz is broken, even on the redirected Nook Devs page.
Yeah, that article is removed. Does anyone have a noogie.img they can slap in dropbox public?
Man, they dont make this easy. The direction suck, links aren't working, sheesh. Unlocking the original iPhone was easier! I sure hope this gets updated somewhat soon.
I have noogie.img somewhere on my PC, I'll get it uploaded in about an hour.
Thanks, i hope you can find that file. Since the directions are so vague, do i need a special program to put the file onto an SD card? Or just drag and drop? Thanks. I really hope to get this completed soon.
bobstro said:
It does look like the download link to noogie.img.gz is broken, even on the redirected Nook Devs page.
Click to expand...
Click to collapse
hi bobstro,
i tried restoring my backup to my nook to update it to 1.1.2. i followed everything as said in http://forum.xda-developers.com/showthread.php?t=1142983
but after the restore process, my nook still has the android but it is as it was in the beginning, i mean like a fresh rooted nook(all apps gone).
is this supposed to happen? is it ok, if i update my nook with android in it?
Guyman2 said:
Thanks, i hope you can find that file. Since the directions are so vague, do i need a special program to put the file onto an SD card? Or just drag and drop? Thanks. I really hope to get this completed soon.
Click to expand...
Click to collapse
You don't need to follow those instructions, it's all automated now. You only need noogie.img to create a backup now. Now to find that image...
Edit: Here you go!
Guys, I had quite bad experience rooting my glowlight nook with touchnooter . Basically messed smth up so it couldn't start (just kept flashing). didn't save my back up. had to do unrooting with the software 1.1 that I guess was from nook without glowlight. Unrooting went fine, but the glowlight function is not working anymore. does anyone know how to solve this or could give me a link to download the proper software? thanks!
dukenookem said:
Guys, I had quite bad experience rooting my glowlight nook with touchnooter . Basically messed smth up so it couldn't start (just kept flashing). didn't save my back up. had to do unrooting with the software 1.1 that I guess was from nook without glowlight. Unrooting went fine, but the glowlight function is not working anymore. does anyone know how to solve this or could give me a link to download the proper software? thanks!
Click to expand...
Click to collapse
you should read the instructions better next time...
but making errors is human and you have a cool nick
I'll hopefully receive my glow in two weeks and I'll upload my backup then
You should make an effort to salvage your personalized data in /rom.
There is all the info in the p2 partition (/rom).
There is also a backup copy in the p3 partition (/factory) as rombackup.zip
You might do this with noogie or CWR and ADB.
Zorkman said:
you should read the instructions better next time...
but making errors is human and you have a cool nick
I'll hopefully receive my glow in two weeks and I'll upload my backup then
Click to expand...
Click to collapse
I could use that backup too, to revive my nook =)
I have an open thread here with all the efforts done so far http://forum.xda-developers.com/showthread.php?t=1805936
Nook Glow Backup Image
I have a backup image of a NSTG that I am uploading right now ... and looks like it just finished. Here it is:
dl[dot]dropbox[dot]com/u/98836278/nook-glow-backup.img
When you have the image downloaded follow these instructions:
blog[dot]the-ebook-reader[dot]com/2012/05/02/how-to-backup-and-restore-nook-glow-and-nook-simple-touch/
As a new user I am not allowed to post outside links.
Downloading, thank you so much!!!
I'll post again with the results...
YES, YES, YES, YES !!!!!!
leadbella thank you a million times!!
I downloaded the image, and wrote it ot my nook.
By the end of the operation, which took some 9 minutes or so, the process ended abruptly:
error 27 writing to disk at sector 3825664
I opted to ignore it and reboot the nook, just to see what happened. The nook booted alright.
I then booted in CWR and replaced /rom with the contents of my own nook /rom which I had salvaged.
I then booted again, and performed all the process flawlessly.
So far I have registered the device again (no error here since /rom contains my sensitive data. Don't know if it would work if the data was from the original image, since MAC address, device SN and some other parameters would not match), loaded a couple of books and started reading again.
Just in time for another one week shift (leaving tomorrow)
Leadbella you saved my..... nook =)
Thank you, I owe you one.
No problem at all. Looks like it worked for srgarfi ... dukenookem please let me know when you have finished downloading the image. I need to use my dropbox for other things at some point, but I can keep it in there until you finish downloading the image. If the image link above no longer works and anyone needs a copy of this image feel free to send me a message and I will try to post it back up.
The image is from a just out of the box NSTG with no information and nothing added to it.
leadbella said:
No problem at all. Looks like it worked for srgarfi ... dukenookem please let me know when you have finished downloading the image. I need to use my dropbox for other things at some point, but I can keep it in there until you finish downloading the image. If the image link above no longer works and anyone needs a copy of this image feel free to send me a message and I will try to post it back up.
The image is from a just out of the box NSTG with no information and nothing added to it.
Click to expand...
Click to collapse
Thanks Leadbella. Downloaded the backup. Tried to follow the instructions, but the size of you file is almost 2 gb, too large for my microSD. Didn't expect the backup file to be that large. gonna go look for a larger sd card.
Renate NST said:
You should make an effort to salvage your personalized data in /rom.
There is all the info in the p2 partition (/rom).
There is also a backup copy in the p3 partition (/factory) as rombackup.zip
You might do this with noogie or CWR and ADB.
Click to expand...
Click to collapse
That totally didn't make any sence to me. Sorry for my ignorance. Are there any instructions to follow? thanks.
Could not register
Hey leadbella, thanks for uploading the backup image. I downloaded and worte it to my nook STG. However, I couldnt get pass the setup process. Everytime I reach the log in menu, it will have the error logging in msg. Do you know what might be wrong?
Zaotr0pe said:
Hey leadbella, thanks for uploading the backup image. I downloaded and worte it to my nook STG. However, I couldnt get pass the setup process. Everytime I reach the log in menu, it will have the error logging in msg. Do you know what might be wrong?
Click to expand...
Click to collapse
You should have saved your /rom files before ovewritting your nook with leadbella's image.
And I'm afraid there not anything you can do to recover your unique /rom files for your nook now.
Oh, I was concerned that Leadbella had posted an unedited backup...
so, what is going on?
first: if a post about partitions isn't comprehensible to you yet -- you probably shouldn't root your device until you do enough reading that you understand it a bit.
Putting leadbella's file onto an SD card probably won't work as a way to restore; when I recover from an image, I use a usb cable and write from my computer to my device.
Leadbella seems to have taken a complete backup image from the device - this will include the important /boot and /system partitions (which is good) but will also include the /rom partition, which unfortunately is unique to every device.
So, if you restore from that image and don't have access to your own /rom partition or recovery image, you're going to wind up attempting to register a second copy of Leadbella's Nook to your account. Fortunately for Leadbella, that won't work.
Now, what can you do to repair and get a corrected nook which can be registered?
I'm going to try an experiment - I'm going to start by backing my device up in its current state.
(I do this by making a Noogie disk
Booting from Noogie
Connecting to my computer
using the command dd if=/dev/sdX of=/dev/currentnookglow.img bs=1M
where X is the number of the device that pops up when I connect my NSTG to the USB port.)
That requires linux; if you don't have linux, you can install VMWare Player (Free) and then install linux in that.)
What I'm going to try doing:
- back my system up
- image with Bella's file
- delete the file /rom/devconf/MACAddress from the imaged device
- reboot the device
- see if I can now see the real, physical MAC address, either on the device (unlikely) or on my router (likelier)
If I can see the MAC address, recreate the file with the correct values for Mac and also create a correct file for serial number /rom/devconf/SerialNumber
Boot, and see if the device is registerable to my account.
BUT: right now, BN has blown out the Nook Touch register/deregister/register process. So I can't do the test until they fix that.
And if it does work, anyone trying it will need
- the noogie disk
- linux
For windows users, maybe, but I have not tried:
- a clockwork boot disk
- functioning ADB able to connect to your clockwork-booted device
(Some clockwork boots support ADB; some do not.)
as roustabout explains, you can write Leadbella's image to your nook (if in windows use win32diskimager or diskimage) and then take a look at the contents of /rom.
The fix the contents of macaddress and serialnumber, but only if you plan to use the nook with B&N services fix the rest of the necessary files.
If you just plan to use your nook as a standalone reader (yes, why not?) once registered you can just ignore the contents of /rom (at least until the next software update).
leadbella said:
I have a backup image of a NSTG that I am uploading right now ... and looks like it just finished. Here it is:
dl[dot]dropbox[dot]com/u/98836278/nook-glow-backup.img
When you have the image downloaded follow these instructions:
blog[dot]the-ebook-reader[dot]com/2012/05/02/how-to-backup-and-restore-nook-glow-and-nook-simple-touch/
As a new user I am not allowed to post outside links.
Click to expand...
Click to collapse
These links are both no longer available. Can someone post them to a mirror?
I'd really appreciate reup as well, since my backup is not working and I need to restore my NSTG.
before restoring from someone else's img, remember to salvage your own /rom partition since these files are unique to each device and you'll need them to register your nook prior to starting reading.
That said I can upload that IMG, but what's the best choice to do so? Any of the many filesharing services? Dropbox ? Google Drive?
require those images
Hi srgarfi, is it possible for you to please upload those images... i need them...
Please reupload the backup. I could really use it too.
the image I used, originally shared by LeadBella (thanks again!) is here:
https://www.dropbox.com/s/xikkjs627s9mw2r/nook-glow-backup.img
Remember to save your /rom files before applying the backup or you won't be able to register your nook on B&N to start reading.
I have a Nook Simple Touch Glowlight with software verion 1.1.5. All the information that I've been able to Google is for 1.1.2, in fact that is the version that I still see on the B&N website.
I _think_ that I have found a suitable way to root the device with Nooter but I would like to know how to confirm that in fact this is the right project for my software version. I'm sorry that I cannot post a link to the Nooter project, but I have less than 10 posts.
Thanks.
There are at least two methods that work with the Glowworm.
You should not use any method until after you have
- made a noogie disk
- booted from it
- backed up your device
- restored that backup to a test disk (a 2 gig or larger microSD card, for instance) and confirmed that the test results in a disk that has 8 partitions.
Many people have made the backup but not tested it; when they tried to restore, they did bad to fatal things to their devices. A very common failure on restore seems to be only getting one partition restored and blowing out the other partitions.
I don't know if the stuff that eded is working on has come to fruition yet - he was looking at building a tool that could detect whether it was run on an NST or NSTG and root appropriately to the device.
The two routes I know work are:
- glownooter, the nooter project tool, includes Google apps and market support
- tinynoot, pasted together from various tools, gives you minimal root without google apps and with amazon appstore. Will work with either NST or NSTG because it's approach is so minimalist.
Thanks, roustabout! I will be sure to test the backups before I install anything else, then. Good to know!
In any case, what I am most concerned about is getting the right version of the rooting software for my device. I see that Nook devices have different firmware and that certain tools only work with certain firmware versions. I see no mention of my firmware version in any tools' websites, hence my apprehension.
hence the value of a backup
I saw your request on that and I think one of the issues here is that so many folks use Windows exclusively, and the backup process is so easy on linux that trying to tell people how to do it in Windows is like jabbing yourself in the eye with a stick, given that linux is free, vmware player is free, and linux can be installed and used for this job entirely in vmware player. On the other side of the coin, if you know nothing of linux, even using dd correctly will be a challenge since there's a pretty steep learning curve behind setting up a new OS successfully just to be able to get backups off an 80-130 dollar device.
In your case: as of now, there is only one firmware release for the glowlight. This is why the folks with the tools aren't mentioning it, aside from 'this is for a glowlight.'
I didn't mention it, but I also use Linux at home (Kubuntu, like Ubuntu but with a better UI). So many people are now using Ubuntu that I find it surprising that the instructions even bother mentioning the OSes for which the operation is as difficult as you say. I remember when doing things in Linux was hard and Windows was easy, and at that time Linux was hardly ever mentioned!
In your case: as of now, there is only one firmware release for the glowlight. This is why the folks with the tools aren't mentioning it, aside from 'this is for a glowlight.'
Click to expand...
Click to collapse
I did not realize that the 1.1.5 release is glowlight-only. Great, thanks, I'm on to hacking this thing!
ok, so for you the backup process is:
- make the noogie disk
- put it into your device
- power cycle your device
- when it boots to "rooted forever," connect the USB cable to your linux box
- once the linux box mounts the NSTG as storage, pay attention to which device it is mounting it at. Assuming it's sdX:
- backup with dd if=/dev/sdX of=backup.img bs=1M
When that's done, disconnect your NSTG, throw media of some sort, larger than 2G, onto your box and test your restore with
dd if=backup.img of=/dev/sdY bs=1M
Once that's done, do an
fdisk /dev/sdY
and a
p to print the partition table.
You should have 8 partitions (and your backup.img file should be just under 2 gig.)
Hack away; if you ever need to restore, you can just drop the virgin image back on.
I take a snapshot like this of my device every so often since remembering how I got to whatever config I liked is harder than just backing it up.
Thanks for the backup instructions, the idea of testing it on a DVD-ROM looks to save quite a bit of trouble with the actual device..
I rooted with this terrific guide:
http://forum.xda-developers.com/showthread.php?t=1675706
The process was simple. I do have an issue where I need to install a Hebrew font but ES File Manager doesn't seem to see the root folders. I'm having a hard time googling my way out of this one, bu all the other little issues were fairly simple.
One issue that I will mention that was hard to solve was the inability to perform searches in the Market. This page helped me resolve that issue:
blog.the-ebook-reader . com/2011/07/15/rooted-nook-touch-fixing-market-search-and-other-tips-and-tricks-video/
I just figured out that the file manager has to have Root permissions enabled. I've enabled it and added some fonts to /system/fonts but I still cannot get Hebrew text to display on this device. All I get are the typical rectangles instead of characters. Any ideas about how to proceed?
Thanks.
Restore Nook 1.1.2
roustabout said:
Many people have made the backup but not tested it; when they tried to restore, they did bad to fatal things to their devices. A very common failure on restore .
Click to expand...
Click to collapse
1. I made this exact same mistake yesterday and I ended up with a bad backup.
2. My Nook Simple Touch (1.1.2) is now not working because I wiped ALL the partitions before attempted to restore the backup (which I didnt know was bad at the time)
3. Please help me restore the Nook back to factory or any working state. Are there any restorable backup images that can be downloaded online?
p.s. I have tried touchnooter and installed touchformatv2 but all I get now is a Read Forever load screen.
Please Please Help Me Im so sad (I know this is down to carelessness on my part but I really need help)
bubblewrapper said:
1. I made this exact same mistake yesterday and I ended up with a bad backup.
2. My Nook Simple Touch (1.1.2) is now not working because I wiped ALL the partitions before attempted to restore the backup (which I didnt know was bad at the time)
3. Please help me restore the Nook back to factory or any working state. Are there any restorable backup images that can be downloaded online?
p.s. I have tried touchnooter and installed touchformatv2 but all I get now is a Read Forever load screen.
Please Please Help Me Im so sad (I know this is down to carelessness on my part but I really need help)
Click to expand...
Click to collapse
Few people who will be knowledgeable will find your post buried here under this thread. i suggest that you simply start a new thread with a good descriptive title so that the gurus will find it.
Not sure how to get hebrew working. One assumes that in addition to the characters, you need it to right to left? If it's the latter, I know there was a thread discussing doing this with Arabic, and I'm not sure how that turned out. You can also google around for folks looking at this on, I think, mobilereads.
roustabout said:
Not sure how to get hebrew working. One assumes that in addition to the characters, you need it to right to left? If it's the latter, I know there was a thread discussing doing this with Arabic, and I'm not sure how that turned out. You can also google around for folks looking at this on, I think, mobilereads.
Click to expand...
Click to collapse
Actually, I think that I just need the fonts (or at least that would be a great first step). I put fonts with Hebrew glyphs in /system/fonts (using ES File Explorer in Root mode) but even after a restart it does not find the fonts (i.e. Hebrew text still shows as rectangles). I will fight with it some more in the coming days, if I don't succeed I will start a new, concise thread on the topic. There are plenty of Google posts on the subject, but all of the ones that I have seen (not Nook-specific) suggest that dropping the fonts is /system/fonts should be enough. Perhaps it is a permissions issue, I'll see if I can SSH into the device to see permissions.
dotancohen said:
I have a Nook Simple Touch Glowlight with software verion 1.1.5. All the information that I've been able to Google is for 1.1.2, in fact that is the version that I still see on the B&N website.
I _think_ that I have found a suitable way to root the device with Nooter but I would like to know how to confirm that in fact this is the right project for my software version. I'm sorry that I cannot post a link to the Nooter project, but I have less than 10 posts.
Thanks.
Click to expand...
Click to collapse
Sorry that I am so slow to respond, but I think this is the information you need to root a Nook with Glow on version 1.1.5
It uses Glownooter
http://blog.the-ebook-reader.com/20...using-glownooter-includes-googles-app-market/
and this is the backup routine
http://blog.the-ebook-reader.com/20...-and-restore-nook-glow-and-nook-simple-touch/
ladykayaker said:
Sorry that I am so slow to respond,
Click to expand...
Click to collapse
Thank you! You don't need to apologize for taking time to respond, you are under no obligation! But I very much do appreciate your assistance and am happy to wait patiently! You will notice that I usually google issues first to try to save us both the time!
I think this is the information you need to root a Nook with Glow on version 1.1.5
It uses Glownooter
http://blog.the-ebook-reader.com/20...using-glownooter-includes-googles-app-market/
and this is the backup routine
http://blog.the-ebook-reader.com/20...-and-restore-nook-glow-and-nook-simple-touch/
Click to expand...
Click to collapse
Thank you. It seems that those posts are Windows-centric summerizations of information found here at XDA-developers. The root is pretty much the process that I used, but from the guide right here which has Linux directions as well.
By the way, the-ebook-reader site is often not responding for me. Is it just for me, or does everyone have trouble with that site?
Thanks!
version 1.2.0
UK glowlight ships with 1.2.0. Use tinynooter to root this. You may have issues installing apps atm though but you will get the browser at least.
http://forum.xda-developers.com/showthread.php?t=1961835
Thanks, Loney. In fact, I got this Glowlight in the US, and it reports that it has software verion 1.1.5. But the information will be good for others who might google this thread!
Hello all ...
Please .. I need some advice..
This is my first post. My sister has given me her Nook Simple Touch Glowlight. I would like to root it, as I've been looking for a device to keep notes and stuff on. I went as far as booting up with noogie.img and backing up the firmware. I don't know what to do, because I read that having a certain firmware changes everything? I don't think my sister updated the nook. Here is the information from the Settings / Device Info / About Your Nook.
Software Version: 1. 1. 5
Model Number: BNRV350
I read someplace that the sizes of the firmwares are different. The simple touch is 1. 82 and the simple touch glow is 1. 86.
Mine is 1 .82, but yet it has the glowlight? It says to hold the button down for two seconds to turn it on.
I see that B&N have new firmware for the nst & nstg. 1. 3 I believe. It said on the site that this firmware would be installed when the nook is idle. (via wifi) Anyway, I'm wondering if it would be ok to go ahead and root the thing, or upgrade the firmware first to maybe - 1. 2 (if I can find it?) before I do anything else? Oh and should I stay away from B&N's new 1. 3 firmware?
Thank You Very Much !!
WillyS.......
If you indeed have the Nook Simple Touch with Glowlight (black bezel), then the most recent stock firmware is 1.2.1 which can be downloaded here. I would recommend that you update to this as the first thing you do. Next you need to decide which of the multitude of rooting methods is best for you. You need to take into account what you wish to achieve by rooting the Nook and your skill/comfort level with the processes. I have followed many of the different processes, doing a factory reset between root versions. By far the easiest is Nook Manager. I, personally, prefer the Minimal rooting - back to basics method because it allows you to install just what YOU want. However, this method requires a fair amount of command line work.
EDIT: I made the assumption that you are in the US and have a US model. I believe there is a different firmware number for the international model. In any case, you should update the Nook to the most recent firmware before rooting.
Rooting nook .. Glowlight ..
Hello David and Thank You kindly for the reply!
Yes, mine is a Canadian version and it has the black bezel.
Thank you .. for correcting me on the firmware. I was looking at the wrong Nook version. (nook.barnesandnoble.com/u/software-updates-nook-glowlight/379004086)
I downloaded the correct 1. 2. firmware for the nook and I (like you) would rather install what I want to and have more control over what gets put on it. After I update the firmware, I'll come back and follow the links you provided. If you know what threads have the latest / newest info on rooting the nstg, can you please point me to it? (If you haven't already) Thank You Very Much for your help .. David.
Cheers
WS
You're welcome. If you are comfortable with a lot of manual, command line manipulation, start with the Minimal rooting - back to basics thread. There are many more and newer rooting methods, but each of them installs a bunch of apps that the creators use, which may or may not be of importance to you. If you start with the Minimal rooting - back to basics, you can then pick and choose the apps and modifications you want to apply to give you the best experience for YOUR needs. I am attaching the document I use to keep track of what I have done for your reference. Feel free to post any questions here.
Rooting Nook STG .. Firmware 1. 2 ...
Hi David and Thank You for the reference document.
Last night I downloaded 1.2.1 firmware and dumped it on the Nook. When I got up this morning I checked and 1.2 is installed. I looked around and found a 16gb Kingston (from GPS) SD-Card. It is only class 4, but it should be usable for the time being. I'll take a look online for a class 10. I don't know if there is any size, or class limitations, or not?
I'm at the rooting - back to basics thread. I'm going to read all this stuff over and see if I can figure it all out. Thanks again for your help and the document.
WS...
WillySizard said:
...
Last night I downloaded 1.2.1 firmware and dumped it on the Nook. When I got up this morning I checked and 1.2 is installed. I looked around and found a 16gb Kingston (from GPS) SD-Card. It is only class 4, but it should be usable for the time being. I'll take a look online for a class 10. I don't know if there is any size, or class limitations, or not?
...
Click to expand...
Click to collapse
Class 4 should work just fine. Since noogie only takes ~2GB (if I remember correctly) you don't really need a card any larger than 4GB to use this method of rooting. Having 8GB or 16GB card would be useful if down the road you will make use of the card to backup your Nook ROM & user-content for ease in recovery.
Don't really know where to go from here, or what to do ..
@ digixmax .. Thank You for the info on the SD-card. Good to know info!
@ david0226 .. I went to the page about rooting via the link and I have basic
understanding how / what needs to be done, but I'm not having much
luck finding and using the tools. I went and looked for the file used to
extract the 2 files from uRamdisk, but I couldn't find it. I did some reading
and looking around and found a program called Preboot (I think) by
Intel and it contained bootutil 32/64 and so on. I had to install preboot & then
uninstall it, to get bootutil and then install it. I tried using it to extract
the files, but I kept getting failed messages. Like invalid switch /x.
Invalid switch /v. Invalid file uRamdisk. I know I need to extract out 2
files: init.rc and default.prop. I tried to do so in the "Administrative Command
Window" on Win7_64bit, but it just wouldn't work with bootutil. Not the
one I had anyway. Any ideas? Thanks!
WillyS......
David0226 said:
...
I am attaching the document I use to keep track of what I have done for your reference. Feel free to post any questions here.
Click to expand...
Click to collapse
What extensions does "Extended Power Menu" provide?
Also, which uImage and uRamdisk do you use as uRecImg and uRecRAM?
TIA.
Here are the links to the relevant threads.
Extended Power Menu
Clockworkmod based Recovery post #75, see the entire thread here.
If you are going to do the Extended Power Menu, be sure to do the Clockworkmod based Recovery also or you risk wiping out everything you have done by accidentally hitting recovery in the Extended Power Menu. I you have installed Clockworkmod Recovery and accidentally hit "Recovery", it will just boot to Clockworkmod and give you a chance to back out.
@willys. I will have to look up the software I use and post tomorrow. Sorry I missed your question earlier.
@willys, I believe the program you want is "bootutil" which was written and shared by Renate NST. If you find a post by her and click on the yellow box in her signature, you will find links to the many custom programs she has written for rooting and managing rooted Nook Simple Touch devices.
David0226 said:
@willys, I believe the program you want is "bootutil" which was written and shared by Renate NST. If you find a post by her and click on the yellow box in her signature, you will find links to the many custom programs she has written for rooting and managing rooted Nook Simple Touch devices.
Click to expand...
Click to collapse
Yes, I had to go to her profile and I found it there. I'll do this part first and see how it goes. After that (I think?) I need to get an android program (some kind of Installer maybe?) to do some other work with. Anyway, one step at a time. All for now. Thanks! ... WS.
digixmax said:
Class 4 should work just fine. Since noogie only takes ~2GB (if I remember correctly) you don't really need a card any larger than 4GB to use this method of rooting. Having 8GB or 16GB card would be useful if down the road you will make use of the card to backup your Nook ROM & user-content for ease in recovery.
Click to expand...
Click to collapse
Class 2 and 4 will do just fine, in my case I used 520 Mb microSD card for installing various ROMs, tried quite a lot of them, always worked fine.
Almost done, but need a little more help . . .
Mnurlan said:
Class 2 and 4 will do just fine, in my case I used 520 Mb microSD card for installing various ROMs, tried quite a lot of them, always worked fine.
Click to expand...
Click to collapse
OK .. Thank You Mnurlan!
@David0226 ...
Just getting to the point where I'm ready to add programs. have edited uRamdisk and re-installed the two files. I've download android-sdk package and have installed it. I have been in the nook via wifi using ndb shell as root. I am now following your notes file. I've created the archive folder on the nook - /system/archive and I've been moving files over from /system/apps folder. I got Nook Manager written to the sd-card and I have PackageInstaller.adk from it, but I I'm not sure how I get that onto the nook. When I boot with NookManager, it ask if I want to root. I have already done that and it is working. Should I let it do it anyway?
Thank You!
WillySizard . . . .
@WillySizard ...
Connect to the Nook with adb then exit the adb shell back to your Windows command prompt. Once back at the command prompt, you should be able to install any package using this command ...
adb install {package_name.apk}
Nook Simple Touch Glowlight .. Need advice before rooting ..
David0226 said:
@WillySizard ...
Connect to the Nook with adb then exit the adb shell back to your Windows command prompt. Once back at the command prompt, you should be able to install any package using this command ...
adb install {package_name.apk}
Click to expand...
Click to collapse
Ahhh .. ok. Good enough then. That should get me off and running.
Thank You .. David. Sorry I'm being such a pest.
Me, also
Just paid $5 for a BNRV350 at a rummage sale.
I understand BN disabled the web browser with the current operating system.
I can get a Google search window (by repeated tapping on the "Google" or maybe the "404" or the "that's all" links that appear when I try the "connect to social" settings menu choice for Google. And "find my account" worked when given the Gmail userid (because the keypad on the Nook lacks a period for typing a proper email address, in this view).
And I can get a Twitter login page. Neither works well -- typing even a single letter into the password field resets the page, so it's letter, then tap in the field window, then another letter, then tap in the field window. Sometimes it shows a row of dots for characters already entered, other times those are invisible but the entries are still there.
Just curious to add to the above fellow's thread for anyone searching for this Nook model number, if anyone has advice or suggestions about making it useful.
Reverting to the original OS to have use of the web browser would be a welcome option, if that's possible. Pointers welcome. Right now this Nook has version 1.1.5 installed -- I gather that's one of the improved versions that killed the stock web browser.