Database Users

[Q] Factory restore

I need a .img of the original rom, where can i find? Thanks

Aran83 said:
I need a .img of the original rom, where can i find? Thanks
Click to expand...
Click to collapse
You cant, every NST is unique and using an image from another NST will cause trouble for both you and the NST it came from.

Thanks, nook is bricked but I can read the main partition, which .img I install?
Sorry for my english.

Aran83 said:
Thanks, nook is bricked but I can read the main partition, which .img I install?
Sorry for my english.
Click to expand...
Click to collapse
There's no img you can install.
You can try booting n2T-Recovery (v0.2) from a SD card and see if that helps. (Do not write that image to your NST!)
If not, send me a PM and I'll try to help you out

Something else you can try:
1) Flash noogie.img to an sd card.
2) Hook up your nook to a pc via usb once it has booted, and you should see all the partitions exported there.
3) In one of those partitions (recovery maybe? I'm struggling to remember), there's a factory.zip, which you can then install using the "Install from zip" feature of clockwork mod.
If you go this route, you'll have to reflash your sd card with clockwork mod after you've extracted the factory.zip using noogie.
Seems like kind of a pain, but I just recovered my device using this.

Remains in the screen ROOTED FOREVER and i can't do anything

I think, for michaelwill's method, you need to have linux running. I suggest you to try ros87's suggestion.

if I use backup from nook of my friend?

Aran83 said:
if I use backup from nook of my friend?
Click to expand...
Click to collapse
That is not a good idea, since each NookTouch has a unique information to register. If you are thinking of full restore from your friend's image (1.8GB image), it will overwrite your unique information. In that case, you and your friend's devices cannot register to BnN (or just one device). People says the info is stored in /rom. If you want to know more, you need to dig more. Otherwise try factory reset suggested by ros.

herofmm said:
That is not a good idea, since each NookTouch has a unique information to register. If you are thinking of full restore from your friend's image (1.8GB image), it will overwrite your unique information. In that case, you and your friend's devices cannot register to BnN (or just one device). People says the info is stored in /rom. If you want to know more, you need to dig more. Otherwise try factory reset suggested by ros.
Click to expand...
Click to collapse
Correct!
Using a image from another NST is a very very bad idea!
There are a lot of stuff that's unique to your NST stored in /rom and in rombackup.zip on the Factory partition.
This includes:
Serial Number
Main Board Serial
Product ID
Manufacturing date
SHA hash of Private Key
Public Key in modulus form
WiFi Calibration file
Some unique binary file for your eInk screen
MAC Address
Battery Type
Duplicating the serial will make you or your friend unable to register with B&N
Duplicating / Faking the private/public key pair, will most likely make you unable to register with B&N (I'm currently testing this)
Duplicating a WiFi calibration can cause degraded WiFi performance
Duplicating that EPD vcom file (eInk screen).. well who knows
Duplicating the MAC will cause network troubles if used on the same network.
The wrong Battery Type (I've seen three different so far) can cause charging troubles, and will cause incorrect charge indication.
Don't go there!

NookRestore.img
Try writing NookRestore.img to an mSD card. (You can get a copy at my website: NootRoot)

Hard reset
I had issues rooting my NST and got stuck in a boot loop. After digging and digging through forums I finally discovered the secret to a hard reset. The instructions said to hold the power and the two bottom side buttons down together for over 20 seconds. That worked! My NST was back to when I pulled it out of the box. I then proceeded to re rooting. (my mistake was I did not upgrade the OS before rooting). My bad. Hope this helps someone recover from a stuck boot loop.
Good luck.

chucktate said:
My NST was back to when I pulled it out of the box.
Click to expand...
Click to collapse
No it wasn't, Factory Reset doesn't remove root files or system apps installed by root tools, it only clears custom apps and settings.
While you might think it's back to stock, there are still leftover files and changes in /boot and /system

ros87 said:
Correct!
Using a image from another NST is a very very bad idea!
There are a lot of stuff that's unique to your NST stored in /rom and in rombackup.zip on the Factory partition.
Click to expand...
Click to collapse
Hi, I've just found a way around this - it is possible to restore somebody else's .img file, provided you've backup up your rombackup.zip. Then after, using Noogie, you can overwrite rombackup.zip and the contents of it which are on a different partition. The only danger is that you would potentially overwrite battery type config file, as Nook has couple of them. I gave it a try on mine and it seems fine.

sokoow said:
Hi, I've just found a way around this - it is possible to restore somebody else's .img file, provided you've backup up your rombackup.zip. Then after, using Noogie, you can overwrite rombackup.zip and the contents of it which are on a different partition. The only danger is that you would potentially overwrite battery type config file, as Nook has couple of them. I gave it a try on mine and it seems fine.
Click to expand...
Click to collapse
That is correct.
Problem is that most people who end up in a state where Factory Restore doesn't work has usually managed to overwrite their partition tables and part of the /rom partition.
And at this point it is too late to backup rombackup.zip as it's usually fragmented and cannot be recovered by ext2 file recovery tools.
So.. do a full backup before you do anything to your NST

I found if you restore with holding the two lower buttons it will remove all rooted files.

Googie2149 said:
I found if you restore with holding the two lower buttons it will remove all rooted files.
Click to expand...
Click to collapse
Read post 13 by ros87!
ros87 said:
No it wasn't, Factory Reset doesn't remove root files or system apps installed by root tools, it only clears custom apps and settings.
While you might think it's back to stock, there are still leftover files and changes in /boot and /system
Click to expand...
Click to collapse
Go to my website, download nookRestore.img and write it to an mSD card, Erase and De register, Power Off, then insert mSD then power up, then follow on screen instructions!

[OT - Removed]

[OT - Removed]

Torimu.Joji said:
I'll update the website and post links to XDA.
Click to expand...
Click to collapse
Thank you sir!
By posting proper links you help ensure that people get the most recent software and information

[Q] Rooting newer Nook version: how to know which software?

I have a Nook Simple Touch Glowlight with software verion 1.1.5. All the information that I've been able to Google is for 1.1.2, in fact that is the version that I still see on the B&N website.
I _think_ that I have found a suitable way to root the device with Nooter but I would like to know how to confirm that in fact this is the right project for my software version. I'm sorry that I cannot post a link to the Nooter project, but I have less than 10 posts.
Thanks.

There are at least two methods that work with the Glowworm.
You should not use any method until after you have
- made a noogie disk
- booted from it
- backed up your device
- restored that backup to a test disk (a 2 gig or larger microSD card, for instance) and confirmed that the test results in a disk that has 8 partitions.
Many people have made the backup but not tested it; when they tried to restore, they did bad to fatal things to their devices. A very common failure on restore seems to be only getting one partition restored and blowing out the other partitions.
I don't know if the stuff that eded is working on has come to fruition yet - he was looking at building a tool that could detect whether it was run on an NST or NSTG and root appropriately to the device.
The two routes I know work are:
- glownooter, the nooter project tool, includes Google apps and market support
- tinynoot, pasted together from various tools, gives you minimal root without google apps and with amazon appstore. Will work with either NST or NSTG because it's approach is so minimalist.

Thanks, roustabout! I will be sure to test the backups before I install anything else, then. Good to know!
In any case, what I am most concerned about is getting the right version of the rooting software for my device. I see that Nook devices have different firmware and that certain tools only work with certain firmware versions. I see no mention of my firmware version in any tools' websites, hence my apprehension.

hence the value of a backup
I saw your request on that and I think one of the issues here is that so many folks use Windows exclusively, and the backup process is so easy on linux that trying to tell people how to do it in Windows is like jabbing yourself in the eye with a stick, given that linux is free, vmware player is free, and linux can be installed and used for this job entirely in vmware player. On the other side of the coin, if you know nothing of linux, even using dd correctly will be a challenge since there's a pretty steep learning curve behind setting up a new OS successfully just to be able to get backups off an 80-130 dollar device.
In your case: as of now, there is only one firmware release for the glowlight. This is why the folks with the tools aren't mentioning it, aside from 'this is for a glowlight.'

I didn't mention it, but I also use Linux at home (Kubuntu, like Ubuntu but with a better UI). So many people are now using Ubuntu that I find it surprising that the instructions even bother mentioning the OSes for which the operation is as difficult as you say. I remember when doing things in Linux was hard and Windows was easy, and at that time Linux was hardly ever mentioned!
In your case: as of now, there is only one firmware release for the glowlight. This is why the folks with the tools aren't mentioning it, aside from 'this is for a glowlight.'
Click to expand...
Click to collapse
I did not realize that the 1.1.5 release is glowlight-only. Great, thanks, I'm on to hacking this thing!

ok, so for you the backup process is:
- make the noogie disk
- put it into your device
- power cycle your device
- when it boots to "rooted forever," connect the USB cable to your linux box
- once the linux box mounts the NSTG as storage, pay attention to which device it is mounting it at. Assuming it's sdX:
- backup with dd if=/dev/sdX of=backup.img bs=1M
When that's done, disconnect your NSTG, throw media of some sort, larger than 2G, onto your box and test your restore with
dd if=backup.img of=/dev/sdY bs=1M
Once that's done, do an
fdisk /dev/sdY
and a
p to print the partition table.
You should have 8 partitions (and your backup.img file should be just under 2 gig.)
Hack away; if you ever need to restore, you can just drop the virgin image back on.
I take a snapshot like this of my device every so often since remembering how I got to whatever config I liked is harder than just backing it up.

Thanks for the backup instructions, the idea of testing it on a DVD-ROM looks to save quite a bit of trouble with the actual device..
I rooted with this terrific guide:
http://forum.xda-developers.com/showthread.php?t=1675706
The process was simple. I do have an issue where I need to install a Hebrew font but ES File Manager doesn't seem to see the root folders. I'm having a hard time googling my way out of this one, bu all the other little issues were fairly simple.
One issue that I will mention that was hard to solve was the inability to perform searches in the Market. This page helped me resolve that issue:
blog.the-ebook-reader . com/2011/07/15/rooted-nook-touch-fixing-market-search-and-other-tips-and-tricks-video/

I just figured out that the file manager has to have Root permissions enabled. I've enabled it and added some fonts to /system/fonts but I still cannot get Hebrew text to display on this device. All I get are the typical rectangles instead of characters. Any ideas about how to proceed?
Thanks.

Restore Nook 1.1.2
roustabout said:
Many people have made the backup but not tested it; when they tried to restore, they did bad to fatal things to their devices. A very common failure on restore .
Click to expand...
Click to collapse
1. I made this exact same mistake yesterday and I ended up with a bad backup.
2. My Nook Simple Touch (1.1.2) is now not working because I wiped ALL the partitions before attempted to restore the backup (which I didnt know was bad at the time)
3. Please help me restore the Nook back to factory or any working state. Are there any restorable backup images that can be downloaded online?
p.s. I have tried touchnooter and installed touchformatv2 but all I get now is a Read Forever load screen.
Please Please Help Me Im so sad (I know this is down to carelessness on my part but I really need help)

bubblewrapper said:
1. I made this exact same mistake yesterday and I ended up with a bad backup.
2. My Nook Simple Touch (1.1.2) is now not working because I wiped ALL the partitions before attempted to restore the backup (which I didnt know was bad at the time)
3. Please help me restore the Nook back to factory or any working state. Are there any restorable backup images that can be downloaded online?
p.s. I have tried touchnooter and installed touchformatv2 but all I get now is a Read Forever load screen.
Please Please Help Me Im so sad (I know this is down to carelessness on my part but I really need help)
Click to expand...
Click to collapse
Few people who will be knowledgeable will find your post buried here under this thread. i suggest that you simply start a new thread with a good descriptive title so that the gurus will find it.

Not sure how to get hebrew working. One assumes that in addition to the characters, you need it to right to left? If it's the latter, I know there was a thread discussing doing this with Arabic, and I'm not sure how that turned out. You can also google around for folks looking at this on, I think, mobilereads.

roustabout said:
Not sure how to get hebrew working. One assumes that in addition to the characters, you need it to right to left? If it's the latter, I know there was a thread discussing doing this with Arabic, and I'm not sure how that turned out. You can also google around for folks looking at this on, I think, mobilereads.
Click to expand...
Click to collapse
Actually, I think that I just need the fonts (or at least that would be a great first step). I put fonts with Hebrew glyphs in /system/fonts (using ES File Explorer in Root mode) but even after a restart it does not find the fonts (i.e. Hebrew text still shows as rectangles). I will fight with it some more in the coming days, if I don't succeed I will start a new, concise thread on the topic. There are plenty of Google posts on the subject, but all of the ones that I have seen (not Nook-specific) suggest that dropping the fonts is /system/fonts should be enough. Perhaps it is a permissions issue, I'll see if I can SSH into the device to see permissions.

dotancohen said:
I have a Nook Simple Touch Glowlight with software verion 1.1.5. All the information that I've been able to Google is for 1.1.2, in fact that is the version that I still see on the B&N website.
I _think_ that I have found a suitable way to root the device with Nooter but I would like to know how to confirm that in fact this is the right project for my software version. I'm sorry that I cannot post a link to the Nooter project, but I have less than 10 posts.
Thanks.
Click to expand...
Click to collapse
Sorry that I am so slow to respond, but I think this is the information you need to root a Nook with Glow on version 1.1.5
It uses Glownooter
http://blog.the-ebook-reader.com/20...using-glownooter-includes-googles-app-market/
and this is the backup routine
http://blog.the-ebook-reader.com/20...-and-restore-nook-glow-and-nook-simple-touch/

ladykayaker said:
Sorry that I am so slow to respond,
Click to expand...
Click to collapse
Thank you! You don't need to apologize for taking time to respond, you are under no obligation! But I very much do appreciate your assistance and am happy to wait patiently! You will notice that I usually google issues first to try to save us both the time!
I think this is the information you need to root a Nook with Glow on version 1.1.5
It uses Glownooter
http://blog.the-ebook-reader.com/20...using-glownooter-includes-googles-app-market/
and this is the backup routine
http://blog.the-ebook-reader.com/20...-and-restore-nook-glow-and-nook-simple-touch/
Click to expand...
Click to collapse
Thank you. It seems that those posts are Windows-centric summerizations of information found here at XDA-developers. The root is pretty much the process that I used, but from the guide right here which has Linux directions as well.
By the way, the-ebook-reader site is often not responding for me. Is it just for me, or does everyone have trouble with that site?
Thanks!

version 1.2.0
UK glowlight ships with 1.2.0. Use tinynooter to root this. You may have issues installing apps atm though but you will get the browser at least.
http://forum.xda-developers.com/showthread.php?t=1961835

Thanks, Loney. In fact, I got this Glowlight in the US, and it reports that it has software verion 1.1.5. But the information will be good for others who might google this thread!

[TUTORIAL] Recovering your Nook Simple Touch Glow

Disclaimer
Before even consider reading this, know that I cannot be held responsible if following these steps will: brick your device, make your girl friend break up with you, start third world war or do any other kind of damage.
Motivation
This tutorial is intended to help people who did not make a full backup of their device and applied the Alpha-FormatTouch-2.zip to their device and as a result lost the GlowLight feature. It took me a couple of days to figure out how to revert to factory settings, and thus, I hope that I can save others time.
Preliminary
You need
Nook Simple Touch Glowlight, semibricked
SD Card
SD card reader
Downloads
Download the following files:
factory.zip - downloads[dot]nanophysics[dot]dk/nstg/factory[dot]zip (if you have a copy of your own factory.zip -- found on the partition /factory/ -- use that instead)
[ClockworkMod - downloads[dot]nanophysics[dot]dk/nstg/sd_128mb_clockwork-rc2[dot]zip
Install Clockworkmod on SD card
On Mac OS X, plug in the SD card and find the device using
Code:
$ diskutil list
I will assume that your device is /dev/disk1. Unmount the disk
Code:
sudo diskutil unmountDisk /dev/disk1
and write the ClockworkMod to it
Code:
sudo dd if=128mb_clockwork-rc2.img of=/dev/disk1
Copy the factory.zip to the disk and eject it.
On Windows you can use Win32Imager.
Install factory image
Power off your Nook and insert the SD card. Then power it up. After a while the CWM menu will appear (if you get a white screen press right-down). Select "install zip from sdcard" using the right side navigation to go up and down and u to enter. If you enter the wrong menu you can go back on right up. Now select "choose zip from sdcard" and choose factory.zip. Finally, click the option saying "yes - install factory.zip"
After a few minutes the installation is complete and if everything went ok, you should now be back to the original factory software.
Reset user settings (optional)
If you want your Nook to be completely reset, you can optionally do a reset of your settings. Power off you Nook. Power it up again and hold left and right down simultaneously for around 30 s. Answer yes twice. After a while your Nook has been reset.
Backup
Finally, it is time to do what you should have done in the first place (and probably also the reason why you are following this tutorial): Make a full backup of your Nooks internal SD card. See blog[dot]the-ebook-reader[dot]com/2012/05/02/how-to-backup-and-restore-nook-glow-and-nook-simple-touch for more information.

Thanks for the tutorial. However i just had a few queries.
1. My NSTG is rooted and functioning normally. Only glowlight does not work. Does your tutorial apply to such a device too.
2. How can i take backups of my current /rom and /factory partitions so that i can restore them in case of any eventuality.
Thanks a bunch in advance.

i just erase every thing . now my nook is completely messed up.
I can't find your factory.zip would you mind resend it please ?

shank21101985 said:
Thanks for the tutorial. However i just had a few queries.
1. My NSTG is rooted and functioning normally. Only glowlight does not work. Does your tutorial apply to such a device too.
2. How can i take backups of my current /rom and /factory partitions so that i can restore them in case of any eventuality.
Thanks a bunch in advance.
Click to expand...
Click to collapse
If your NSTG is rooted, this may remove rooting - at least I think, I did not try. However, you can always reroot.
Regarding backup, I would make a full image backup before starting. If you have a Windows box, follow the instruction on blog[dot]the-ebook-reader[dot]com/2012/05/02/how-to-backup-and-restore-nook-glow-and-nook-simple-touch and make a full backup of your system.
I have only done backup of individual partitions on Linux: Boot the device with noogie.img and plug it in. On Ubuntu,t 6-8 partitions should immediately appear.

jjinkou2 said:
i just erase every thing . now my nook is completely messed up.
I can't find your factory.zip would you mind resend it please ?
Click to expand...
Click to collapse
There was missing a slash in the URL. It has been fixed.

Are you able to register a device reimaged using this factory.zip to your BN account?
If not, it's a bit of a pain for folks.
I have a disk image made via
dd if=/dev/block/mmcblk0p1 of=/part1.img bs=1M
This contains teh whole of a US NSTG's first partition; restoring it using
dd if=part1.img of=/dev/block/mmcblk0p1 bs=1M
allows me to boot my device, and the glow still works.
This seems to be more likely to restore the glow function yet preserve the ability to register with BN - the factory.zip method is not generic, as far as I know, it will restore some other person's NST serial number, mac address and other identifiers to your device, won't it?
If someone will PM me, I'll send a zipped copy of my .img file to them and let them try using it to recover glow function and their own registration in a nook glow. If that works, it can be posted more widely.

roustabout said:
This seems to be more likely to restore the glow function yet preserve the ability to register with BN - the factory.zip method is not generic, as far as I know, it will restore some other person's NST serial number, mac address and other identifiers to your device, won't it?
If someone will PM me, I'll send a zipped copy of my .img file to them and let them try using it to recover glow function and their own registration in a nook glow. If that works, it can be posted more widely.
Click to expand...
Click to collapse
Remark that I recommend that people use their own factory.zip image. Nevertheless, all these data you mention are stored on the rom partition. To my awareness this partition is only overwritten if one applies rombackup.zip, but not by factory.zip. Thus, your B&N shop should be fully functional afterwards. I did apply someone elses factory.zip first, and I had no problems registering my device. However, if anyone would experience such an issue, please drop a line in this thread.
In any case, you should always do a full system image before following tutorials like this one, or for that matter, before apply someone elses partition images to your own device.

roustabout said:
Are you able to register a device reimaged using this factory.zip to your BN account?
If not, it's a bit of a pain for folks.
I have a disk image made via
dd if=/dev/block/mmcblk0p1 of=/part1.img bs=1M
This contains teh whole of a US NSTG's first partition; restoring it using
dd if=part1.img of=/dev/block/mmcblk0p1 bs=1M
allows me to boot my device, and the glow still works.
Click to expand...
Click to collapse
Judging from your other post (http://forum.xda-developers.com/showthread.php?t=1836188&page=4), the partition you have made a copy of, is the boot partition? If glow was already working, it will still work after overwriting the boot image.
However, if it was not working already, it is very unlikely that installing a new boot image will resolve the issue described here, since it is a consequence having downgraded the OS.

I had not understood that the device you're targeting with this thread is an NSTG running 100% noo simple touch software - the thread refers to a problem with the alpha touch formatter, but I had not realized that was the outcome of the tool.
I've seen a few people describe their NSTGs as "fine, but not glowing any more" and had not seen those folks explain that they were running NST software on the NSTG.
For those folks, I had thought copying in the boot environment and kernel would be helpful. My understanding was that the kernel in the NSTG at software 1.1.5 was different than the NST kernel; I was thinking that getting the kernel and other boot hooks ready was what was really missing.
Fortunately, there's now a 1.2.0 updater out, and I suspect that soon there will be a CWM installable 1.2.0 update which will be super helpful. (Though folks will still need a partition table - I think that would be another use of writing in a viable first partition followed by a restart, to get the partition table straightened out before proceeding.)

roustabout said:
I had not understood that the device you're targeting with this thread is an NSTG running 100% noo simple touch software - the thread refers to a problem with the alpha touch formatter, but I had not realized that was the outcome of the tool.
I've seen a few people describe their NSTGs as "fine, but not glowing any more" and had not seen those folks explain that they were running NST software on the NSTG.
For those folks, I had thought copying in the boot environment and kernel would be helpful. My understanding was that the kernel in the NSTG at software 1.1.5 was different than the NST kernel; I was thinking that getting the kernel and other boot hooks ready was what was really missing.
Fortunately, there's now a 1.2.0 updater out, and I suspect that soon there will be a CWM installable 1.2.0 update which will be super helpful. (Though folks will still need a partition table - I think that would be another use of writing in a viable first partition followed by a restart, to get the partition table straightened out before proceeding.)
Click to expand...
Click to collapse
Ok. No this thread is not intended for people who have destroyed partition tables etc., but only for people who have downgraded their software by using NST recovering guides on their NSTG device. I found it relevant to explain how this is done, since many people complain that their NSTG works, except that glow light no longer works. If they look into the software version they find something below 1.1.5, like 1.1 which was my case. I could not find a guide which explained me what to do after screwing up the software, hence this guide.
Partition tables and "accidently formatting" is a completely other issue. In the end, here the main problem is that people do not make a backup as they assume that everything is going to be fine. I assumed that myself. However, at some point I will have a look at the rom partition, because I think it is quite limited amount of information you find their. It should be possible to restore your Nooks serial number -- it is written on the package of the Nook -- after applying another Nooks image. I just received my second Nook so I am going to try this at some point.

Thank you so much for sharing the solution.. finally my glowlight works now !!

shank21101985 said:
Thank you so much for sharing the solution.. finally my glowlight works now !!
Click to expand...
Click to collapse
Hic, I cannot download the image file, my backup file was deleted, anyone can upload that image for me?
Thanks so much:crying:

factory.zip
I know it's a long shot, but if anyone has a copy of the factory.zip from a glowlight I'd really appreciate it. I've installed a non-glowlight one for now, but would really love my backlight back!
Cheers!

john2k10 said:
I know it's a long shot, but if anyone has a copy of the factory.zip from a glowlight I'd really appreciate it. I've installed a non-glowlight one for now, but would really love my backlight back!
Cheers!
Click to expand...
Click to collapse
So did you actually replace the factory.zip with one for the NST or did you just run a restore from, say, NookManager? I'm not too sure about this, but I think it's kind of difficult to wipe the factory.zip. Anyway, since I'm not familiar with the NTG, and you seem to have done something that others have also done before, have a look at this old thread and see if it gets you anywhere:
http://forum.xda-developers.com/showthread.php?t=1936458

john2k10 said:
I know it's a long shot, but if anyone has a copy of the factory.zip from a glowlight I'd really appreciate it. I've installed a non-glowlight one for now, but would really love my backlight back!
Cheers!
Click to expand...
Click to collapse
Mmm......have a look at this:
http://waveswirl.blogspot.com/2013/01/xda-developers-tutorial-how-to.html

nmyshkin said:
Mmm......have a look at this:
http://waveswirl.blogspot.com/2013/01/xda-developers-tutorial-how-to.html
Click to expand...
Click to collapse
Its dead I need a glowlight factory image

can someone please re-upload the glowlight factory image please.... Thank you in advance

[Q] Seriously messed up glowlight

Hi lovely people,
Ive managed to mess up my glowlight - Ive managed to have a look at the partition table using noogie and the rom partition is showing as unallocated. I've tried data recovery to no avail. I dont suppose anyone has a complete image of a uk nook simple touch glowlight by any chance, or even just a copy of the rom partition that I can copy back into place using minitool partition wizard?
Thanks for reading folks

cortexbomber said:
Hi lovely people,
Ive managed to mess up my glowlight - Ive managed to have a look at the partition table using noogie and the rom partition is showing as unallocated. I've tried data recovery to no avail. I dont suppose anyone has a complete image of a uk nook simple touch glowlight by any chance, or even just a copy of the rom partition that I can copy back into place using minitool partition wizard?
Thanks for reading folks
Click to expand...
Click to collapse
I don't have a full image, but I do have a copy of the /rom partition for you!
Here you go! :good:

thenookieforlife3 said:
I don't have a full image, but I do have a copy of the /rom partition for you!
Here you go! :good:
Click to expand...
Click to collapse
Thanks :0)
Umm how do I use the qr code on my pc? I dont have a webcam or decent mobile phone

cortexbomber said:
Thanks :0)
Umm how do I use the qr code on my pc? I dont have a webcam or decent mobile phone
Click to expand...
Click to collapse
You don't need the QR code to download the .zip. Just click the name of the file up there ^, it's to the left of the "Click for QR Code" text.

thenookieforlife3 said:
You don't need the QR code to download the .zip. Just click the name of the file up there ^, it's to the left of the "Click for QR Code" text.
Click to expand...
Click to collapse
Doh! i thought it was just the one link.
Ive been using computers since the early 80's - embarrasing!

cortexbomber said:
Doh! i thought it was just the one link.
Ive been using computers since the early 80's - embarrasing!
Click to expand...
Click to collapse
The eighties? Wow, you're an old pro, then! :good:
I, on the other hand, wasn't even alive in the eighties!
Let me know how that /rom partition treats you.

thenookieforlife3 said:
The eighties? Wow, you're an old pro, then! :good:
I, on the other hand, wasn't even alive in the eighties!
Let me know how that /rom partition treats you.
Click to expand...
Click to collapse
Ha! Old Pro indeed Old yes. Pro? Definitely questionable. :good:
Will do. Just having trouble now creating a fat32 partition. The various programs ive tried only let me make a 16mb fat16 partition and after putting the rom data on it, the nook still doesnt want to boot. There may be other problems with the rest of the software. Ah well. I'll either get there or buy another e-reader )) But the challenge is more entertaining.

cortexbomber said:
Ha! Old Pro indeed Old yes. Pro? Definitely questionable. :good:
Will do. Just having trouble now creating a fat32 partition. The various programs ive tried only let me make a 16mb fat16 partition and after putting the rom data on it, the nook still doesnt want to boot. There may be other problems with the rest of the software. Ah well. I'll either get there or buy another e-reader )) But the challenge is more entertaining.
Click to expand...
Click to collapse
lol :laugh:
Have you tried booting NookManager from your sdcard and using the "Restore factory.zip" function? That seems to work very consistently.

thenookieforlife3 said:
lol :laugh:
Have you tried booting NookManager from your sdcard and using the "Restore factory.zip" function? That seems to work very consistently.
Click to expand...
Click to collapse
Just trying that now

cortexbomber said:
Just trying that now
Click to expand...
Click to collapse
No joy sadly. More scouring the internet later i think - House chores to do now. SIgh.
Mayn thanks for the rom and the rest of your advice tho

cortexbomber said:
No joy sadly. More scouring the internet later i think - House chores to do now. *sigh*
Many thanks for the rom and the rest of your advice tho
Click to expand...
Click to collapse
If it was logical, I'd totally give you a full image, but the problem is that each device has its own serial number - if I give you an image of my device, then your device will have mine's serial number, which won't work out so well!
I'd love to keep trying to help you, though - Nook Touch related things are really my forte.
Let's start at the beginning - in your first post, you said that "you managed to mess up your GlowLight". What did you do to mess it up?
Is/was your Nook rooted?
Will your device boot and be used properly, but the GlowLight itself just doesn't work?

thenookieforlife3 said:
If it was logical, I'd totally give you a full image, but the problem is that each device has its own serial number - if I give you an image of my device, then your device will have mine's serial number, which won't work out so well!
I'd love to keep trying to help you, though - Nook Touch related things are really my forte.
Let's start at the beginning - in your first post, you said that "you managed to mess up your GlowLight". What did you do to mess it up?
Is/was your Nook rooted?
Will your device boot and be used properly, but the GlowLight itself just doesn't work?
Click to expand...
Click to collapse
Hi again, sorry for not getting back sooner - that damned thing called life always gets in the way
Yeah, it was rooted. I had used cwm and had adw running as a front end and had installed the screen lock bypass, but the bypass didnt work out so well - quite a bit of battery drain - even when left on a table(so no accidental waking up) - i tried to return it to stock - cant remember what i did tho - and now it just starts with the read forever screen and gets no further - it also seems that it doesnt power off and stays on till the battery is flattened. Trying to boot from the sd card using either nook manager or noogie works just fine tho.
I can see the partitions though minitool partition wizard and the Rom partition is "unallocated" there is also an unallocated space of 56mb at the end of the partitions.
I have tried recreating a fat32 rom partition and then copying the rom backup info from the factory partition, but no joy. For some reason, no partition software I have could create a fat32 partition directly on the nook, so I had to create one on the pc and then copy it over :-/
Thanks for the continued help btw

cortexbomber said:
Hi again, sorry for not getting back sooner - that damned thing called life always gets in the way
Yeah, it was rooted. I had used cwm and had adw running as a front end and had installed the screen lock bypass, but the bypass didnt work out so well - quite a bit of battery drain - even when left on a table(so no accidental waking up) - i tried to return it to stock - cant remember what i did tho - and now it just starts with the read forever screen and gets no further - it also seems that it doesnt power off and stays on till the battery is flattened. Trying to boot from the sd card using either nook manager or noogie works just fine tho.
I can see the partitions though minitool partition wizard and the Rom partition is "unallocated" there is also an unallocated space of 56mb at the end of the partitions.
I have tried recreating a fat32 rom partition and then copying the rom backup info from the factory partition, but no joy. For some reason, no partition software I have could create a fat32 partition directly on the nook, so I had to create one on the pc and then copy it over :-/
Thanks for the continued help btw
Click to expand...
Click to collapse
Are you interested in getting back the B&N functions? Because if not, then what I can do is back up my rooted GlowLight, factory wipe it back to 1.1.5, bypass Oobe (B&N registration), update to 1.2.1, and then make an image of that for you.
Beware, though, you won't be able to use any of the B&N functions if you want me to do that, because your device will have mine's serial number. But don't worry, it won't share anything except for that, so your device will be plenty usable.

thenookieforlife3 said:
Have you already tried booting into NookManager and restoring factory.zip?
Are you interested in getting back the B&N functions? Because if not, then what I can do is back up my rooted GlowLight, factory wipe it back to 1.1.5, bypass Oobe (B&N registration), update to 1.2.1, and then make an image of that for you.
Beware, though, you won't be able to use any of the B&N functions if you want me to do that, because your device will have mine's serial number. But don't worry, it won't share anything except for that, so your device will be plenty usable.
Click to expand...
Click to collapse
Yeah, i tried factory reset with nookmanager, but when I pressed the button to choose factory reset, it came up with the screen that showed the start of progress, but nothing else happened - even after several hours.
by b&n function i assume you mean the shop etc - cant say I'm worried about that bit, but if It will be back to stock, with just the stock software on, that would be cool. )
How would I transfer the complete image? I presume fire up noogie and partition wizard, wipe(err backup) all the partitions on my nook and then copy your partitions over?

cortexbomber said:
Yeah, i tried factory reset with nookmanager, but when I pressed the button to choose factory reset, it came up with the screen that showed the start of progress, but nothing else happened - even after several hours.
by b&n function i assume you mean the shop etc - cant say I'm worried about that bit, but if It will be back to stock, with just the stock software on, that would be cool. )
How would I transfer the complete image? I presume fire up noogie and partition wizard, wipe(err backup) all the partitions on my nook and then copy your partitions over?
Click to expand...
Click to collapse
It will be back to stock, but you won't be able to register with B&N and/or buy any books from them. The Social features also will not work.
If you're interested, I'll make that image for you. See the "back up you Nook" link in my signature for a guide on making and restoring Noogie images.

thenookieforlife3 said:
It will be back to stock, but you won't be able to register with B&N and/or buy any books from them. The Social features also will not work.
If you're interested, I'll make that image for you. See the "back up you Nook" link in my signature for a guide on making and restoring Noogie images.
Click to expand...
Click to collapse
Yep! Interested doesnt quite describe it tho More like biting your hand off

cortexbomber said:
Yep! Interested doesnt quite describe it tho More like biting your hand off
Click to expand...
Click to collapse
EDIT - See OverByter's post below, it has shown me that this wouldn't work out.
Try his method. I'll only give you an image of my device as a last resort.

Your image will also have your mac address besides the serial number, don't think that this is the way to go, basically he'll have an unworkable clone of your device. Why doesn't he use cwm to wipe the partition and then either adb push the rom or use a flashable image?
OB
Sent from my SPH-D710VMUB using Tapatalk 2

thenookieforlife3 said:
Ah. :laugh:
I'm kind of busy with school work right now, but I'll try to get it to you today.
Check for PMs from me in a few hours or so. :good:
Click to expand...
Click to collapse
Hehe. Absolutely no rush. I just appreciate the help.

cortexbomber said:
Hehe. Absolutely no rush. I just appreciate the help.
Click to expand...
Click to collapse
Okay, I may actually have solved your problem! Try the following steps - it's called the "eight interrupted boot" method.
1. I am expecting your Nook is still stuck at the "Read Forever" screen. If it's not, go ahead and turn your Nook all the way off.
2. Now, press the power button to take it to the "Read Forever" screen.
3. After it's there, press and hold the power button again to make the screen flash black and go back to the "Read Forever" screen.
4. Perform step 3 seven more times.
5. After the 8th interrupted boot, your Nook will restore itself to the factory image that it came with right out of the box.
6. Done!
Hope this works! :good:

nst glowlight starting up stops every time

I bought a used nst glowlight (bnrv350), I made a backup, and then I tried to root using glownooter, but had a limited success : I could not install google market or opera mobile.
So I tried to restore the backup, but after "read forever, your nook is starting up", nothing happens, the message just stays there. I can boot with the back button, but it does the same.
I then tried to restore the factory image several times, using all the methods I could find in the internet, but it does the same as above. It has been going on for 24 hours.
The problem might have originated when I could not use winimage in my windows 10 computer to make the backup, and I used windows xp in a virtualbox in my linux computer instead. I used also dd, but I am afraid I don't remember the exact order. The backup size is 426.8 MB.
I reverted back to windows 10 with win32diskimager, with the same result.
Can anything be done ?

sinlog said:
I bought a used nst glowlight (bnrv350), I made a backup, and then I tried to root using glownooter, but had a limited success : I could not install google market or opera mobile.
So I tried to restore the backup, but after "read forever, your nook is starting up", nothing happens, the message just stays there. I can boot with the back button, but it does the same.
I then tried to restore the factory image several times, using all the methods I could find in the internet, but it does the same as above. It has been going on for 24 hours.
The problem might have originated when I could not use winimage in my windows 10 computer to make the backup, and I used windows xp in a virtualbox in my linux computer instead. I used also dd, but I am afraid I don't remember the exact order. The backup size is 426.8 MB.
I reverted back to windows 10 with win32diskimager, with the same result.
Can anything be done ?
Click to expand...
Click to collapse
That backup is too large, I think. Should be more in the neighborhood of 250 MB? Have you tried the factory re-image where you just see the booting up screen and then hold down the two bottom hardware buttons until you get a prompt?
It's difficult--but not impossible--to damage the factory image unless you've been messing with the partitions. If that method does not get you there, consider making a NookManager card and trying to access the re-image routine from its menu.

Thank you for your reply. I just used nookManager. After 5 seconds, it said the backup was successful, but there was no backup in the card. Similarly, it said that rooting was successful, but when I removed the card, it did the same as before : "starting up..." and it stays there.
Do you have another idea ? I downloaded the 1.2.2 update from the b&n site. Can nookManager install it ?
PS: The nook was already 1.2.2
Yes, I used the two lower buttons trick.

sinlog said:
Thank you for your reply. I just used nookManager. After 5 seconds, it said the backup was successful, but there was no backup in the card. Similarly, it said that rooting was successful, but when I removed the card, it did the same as before : "starting up..." and it stays there.
Do you have another idea ? I downloaded the 1.2.2 update from the b&n site. Can nookManager install it ?
PS: The nook was already 1.2.2
Yes, I used the two lower buttons trick.
Click to expand...
Click to collapse
5 seconds is not enough time for NookManager to correctly make a backup. And, backups can only be seen on the card if you connect your NSTG to your PC while NookManager is running. Otherwise the partition is invisible.
It's hard to know since I have no experience with the NSTG. If it were an NST I would suggest that you perform the region change flash, but it's not clear if that will remove your light function or, indeed, if the flash is deep enough to rewrite the areas of your device that appear to be preventing boot. AFAIK there are no ROM images for the NSTG available. But there might be. Somewhere.
I guess if you have exhausted all the possibilities, rather than trashing the device I would try the region change (just flash the US firmware again--I assume that's what's on there already). It may or may not preserve the glowlight capability, but it might at least produce a functioning e-reader. But only as a last resort.
Edit: Hmm.... seems like I've been down this winding road before: https://forum.xda-developers.com/showpost.php?p=72551413&postcount=57
But I emphasize that this process worked for a plain NST, not the NSTG, so it is an absolute last resort (and might not work anyway because you could have a completely different situation). Next thing is to look at the innards of the 1.1 updater and see if Glowlight updates could be substituted...

O.K. So here is a thread that contains a link to an NSTG image and the instructions to write to your device (read down in the thread).
https://forum.xda-developers.com/showthread.php?t=2608815
What "may" happen: your device could end up with a mismatched serial number and or MAC address depending on how this image was made. There is information on this forum for correcting the MAC address. Just a disclaimer. I don't know. IF this is successful, you can then do a manual update to 1.2.2 and then root with the updated NookManager. I've checked the link to the image and it is still good. I got a file that is about 245 MB--seems about right. Presumably you use the image in place of your backup in the restoring process described in the thread.

I am very grateful for your help, but I am afraid I need more. The nook is now functioning and I might not have done it without your hints. As you suspected, the serial number and mac address have changed (I wrote them down before all this). I suppose that's why it did not automatically upgrade to 1.2.2 . Also the device says it's connected to the internet, but it doesn't seem to be.
I searched xda (nstg mac address, nstg serial number), but I didn't find anything meaningful to me (there are posts by Renate and by ros87 but too complex). Can you help, please ?

sinlog said:
I am very grateful for your help, but I am afraid I need more. The nook is now functioning and I might not have done it without your hints. As you suspected, the serial number and mac address have changed (I wrote them down before all this). I suppose that's why it did not automatically upgrade to 1.2.2 . Also the device says it's connected to the internet, but it doesn't seem to be.
I searched xda (nstg mac address, nstg serial number), but I didn't find anything meaningful to me (there are posts by Renate and by ros87 but too complex). Can you help, please ?
Click to expand...
Click to collapse
Oy.
I didn't think you would act so rashly with all my disclaimers. Well, it's done. I actually don't think the MAC address is a big deal unless you begin to have issues.
Did you actually manage to register? If so then the serial number must not currently be in use and the change you effected was deep enough to pass muster. If not....well battery life is said to be shorter for devices that have skipped registration.
Correcting the MAC address is described (sort of) here: https://forum.xda-developers.com/showthread.php?t=1483600
As far as I can guess it involves editing a hex file. Doable, but maybe not needed. There is no way to correct the serial number. It is heavily encrypted with private keys. Again, if you managed to register then this is all moot.
How are you judging lack of internet connectivity?

I was not given the opportunity to register and I don't care about registration, but I'd like to have connectivity. The link you just gave me is for the ros87's thread that I mentioned, and I don't know how to use it. So I suppose I cannot upgrade to 1.2.2 . Should I root the device ?
PS : ros87's last activity was 2 years ago
EDIT : I copied nook_1_2_update.zip in the device and it was installed. I have now 1.2.2

sinlog said:
I was not given the opportunity to register and I don't care about registration, but I'd like to have connectivity. The link you just gave me is for the ros87's thread that I mentioned, and I don't know how to use it. So I suppose I cannot upgrade to 1.2.2 . Should I root the device ?
PS : ros87's last activity was 2 years ago
EDIT : I copied nook_1_2_update.zip in the device and it was installed. I have now 1.2.2
Click to expand...
Click to collapse
You didn't answer my question about connectivity. Are you not able to make a connection? With only the stock device there is nothing to connect to other than B&N. What does it say about "Owner" in the Settings?
Yes, you should root. Be sure to use the NookManager update or it won't work.
Before we even think about the MAC address issue you need root access and some way to tell if you actually have an internet connection. That means some kind of functioning browser, etc.
Do you still have that weird backup? If so, keep it safe somewhere. You may want that someday.

I tried to download a book and I got this : Unable to download, Internal error...
I can ping the nook from the computer.
I will look into rooting the device in 2 or 3 hours and then post again. I suppose this is what you're referring to :
https://forum.xda-developers.com/nook-touch/development/nst-g-updating-nookmanager-t3873048
Thank you for your patience with me.

sinlog said:
I tried to download a book and I got this : Unable to download, Internal error...
Click to expand...
Click to collapse
There is an entire galaxy of mystery contained in that statement. Download from where? Download with what? Do you have an sdcard inserted for storage?

nmyshkin said:
There is an entire galaxy of mystery contained in that statement. Download from where? Download with what? Do you have an sdcard inserted for storage?
Click to expand...
Click to collapse
I meant to download a book from the home page of the nook, where it says New reads. I am still unrooted and I don't leave an sdcard inserted.

sinlog said:
I meant to download a book from the home page of the nook, where it says New reads. I am still unrooted and I don't leave an sdcard inserted.
Click to expand...
Click to collapse
Hmm... I'm surprised there are any books populating that section at all since the device is not registered. In any case, that is no test of connectivity since without registration the NSTG will spit out all kinds of generic messages about connections and failures if you attempt anything that requires access of B&N servers--like buying/downloading a book (which you can't do unless you are registered).

Rooted with nookManager updated. Opera mobile needs to be reinstalled. I can connect to the computer using es file explorer, so wifi is ok. BUT I can't use nookManager because I can't read the icon labels. I'll restore the backup tomorrow and I will try another rooting method. There are 2 more, I think : tiny and glownooter. Are there others ?

sinlog said:
BUT I can't use nookManager because I can't read the icon labels.
Click to expand...
Click to collapse
? Do you mean ADW Launcher? You can fix the icon label issue in the Settings. As I recall the default font color is white. That needs to be changed to black. The size can also be changed. Depending on what icon style you pick the label will either be on one line or, if longer, on two. LOTS of Settings in ADW. Don't write it off without spending some time working with it.

Sorry, I used glownooter. It's a lot like touchnooter, with which I am familiar. I still have to sign in to my google account and to install opera mobile. I'll be back when finished.

Opera mobile is installed and working. I still can't sign in to google but I can use yalp store and that's good. Thanks again, nmyshkin, you saved my nook glowlight.