Database Users

Uninstall Gingerbread MIUI 2.3.4 on Galaxy S

Hello, i need to uninstall Miui Gingerbread to install the official Gingerbread, i'm much more used to it, how can i do it?? Already tried to clean up the data and system and tried the Sam's firmaware last gingerbread but it would not worked.. Is it possible to downgrade to 2.2 and then install 2.3.3??
Greetings

Yes it is possible to downgrade for 2.3.3 to 2.2(.1 in my case)
I can't remember exactly how I did it, but I basically followed the instructions to install MIUI, but for a 2.2 ROM, so wiping data, system and cache, then flashing a darky ROM (but should work with any tbh)

Dead easy. Just install the Samsung Android 2.3.3 XWJVB ROM (link - http://www.theandroidsoul.com/how-to-install-xwjvb-gingerbread-rom-gaalxy-s/)
But before you install XWJVB, install the EZRom to remove/uninstall the MIUI. It's available in two versions, select the one you want:
Android 2.2 based EZRom - http://www.theandroidsoul.com/ezbase-ezrom-for-android-2-2-install-revert-back/
Android 2.3 based EZRom - http://www.theandroidsoul.com/ezbase-rom-v3-0-full-installation-guide-w-video/
Credits and Thanks to Nitr8 for great EZRoms

All you need to do it , Flash the Official GB FW , using Odin (Repartition just to be sure)

shivajibanerjee said:
All you need to do it , Flash the Official GB FW , using Odin (Repartition just to be sure)
Click to expand...
Click to collapse
+ check bootloader. And use 512 pit.

take a look at the darkys thread There's a complete solution for your problem. Just work the manual down and you'll gain the ultimate gingerbread experience in green Fully with root and deodexed and so on

Thanks a lot guys.. U guys rock...

[Q] MultiBoot & ICS

Unfortunatelly I don't have permissions to reply in this topic, so I created this one.
I have Installed CM7.2 (from Quarx) on stable recovery and ICS to latest recovery. I use multiboot for this.
Everything worked good, but one of the newest version of ICS has newer kernel, so after I choose it phone just stucks at Moto logo...
So I have 2 questions:
1) Is it possible to get working new ICS on multiboot?
2) If no, how can I delete ICS from latest recovery and install there other firmware?
Thanks

AstorDev said:
Unfortunatelly I don't have permissions to reply in this topic, so I created this one.
I have Installed CM7.2 (from Quarx) on stable recovery and ICS to latest recovery. I use multiboot for this.
Everything worked good, but one of the newest version of ICS has newer kernel, so after I choose it phone just stucks at Moto logo...
So I have 2 questions:
1) Is it possible to get working new ICS on multiboot?
2) If no, how can I delete ICS from latest recovery and install there other firmware?
Thanks
Click to expand...
Click to collapse
Nope its not possible to have the newer versions including 111207 on multiboot!
to get rid of ICS in the latest boot you can just flash an other .zip over it, like miui or stuff...
hope it helped, greetz Esok

It is possible
Yes, it is possible. The only vital pre-requisite is to upgrade the main CM7 system to 2.3.4 kernel version.
But before, take care of:
1. The 2.3.4 kernel has some issue regarding camera, specially green lens (I think it doesn't work yet). Red lens work great, after a few work around with some overlay libs. (all this stuff very well described on CM7 thread).
2. Once you upgrade the kernel, you could install CM9 latest test builds.
pros:
- both systems running latest GB kernel (remember be sure to use 2.3.4)
- great to have CM7 and CM9.
cons:
- be sure to fix your camera in CM7. (of course, hope you have red lens )
- in my case: CM9 boot, but it doesn't detect the baseband (if I check "About phone" Baseband details show "Unknown"). WiFi work Ok.
I really appreciate any advice in this last comment.
Happy holidays

DroniX

Hi
im new to android ..
i own a ideos u8150.........and i have rooted it with z4 root
I also have managed to install clock world mod 3.0.2.4 i flashed it through pc (works perfectly)
now i want to change my stock rom ..i' heard ideos HD and droniX are good roms
i'd like to install droniX 0.6 raw ginger ..
but can anyone help me in flashing the rom i need a guide..
also how can i make full backups so i can revert to my stock rom anytime i want..
Does switching to custom roms affect baseband of my mobile ..
because of a picture i saw in a blog that says "baseband version :unknown" in mobile settings .
i have been a apple user and to jailbreak you need to preserve your basebands so is there anything like that in android
i have also read that after flashing dorinX .6 many see a black screen ..how can i prevent that..
i've also installed rom mangaer free version from market but its useless because everytime press any option it tells me to install colckworld mod and when i press install a list of phones comes up but u8150 is not in the list only 7 options.......
Thankyou

You won't get much love here as this is in the wrong forum, but here is a link to my rom:
http://forum.xda-developers.com/showthread.php?t=1375289
You dont need to use my rom, it just has flashing instructions in the first post.
*Good luck with ginger, it is still not stable, so maybe stick with 0.5.4.
*Baseband is not changed by flashing roms in CWM, only by official huawei update software, find a copy of yours before flashing if you can.
*CWM has the option to make a NAND backup under backup and restore.
*Dronix is good, Leandroidmod is ok, Ideos HD seems to be deprecated as I had bugs which I reported and have not been fixed so I switched roms. Has not had an update in months.
Here is the wiki page for u8150, have fun:
http://forum.xda-developers.com/wik...ei_U8150_IDEOS#Actively_Developed_Custom_ROMs

[Q] Can't flash a different kernel

Hi everyone,
First I should say that I searched and read tons of posts before posting this question so please keep the flaming at a minimum.. thank you...
I have an Xperia Arc currently running the following:
Stock ICS Beta Kernel With CWM 5.5.0
Acronium ICS Beta ROM 2.2
Baseband that ends with .56
After trying ICS for a while I've decided that it is way too buggy for daily use. I want to go back to GB. I want to use Arconium 8.2 with DoomKernel V22...
The problem is.. I am trying to flash baseband 34(or 36 i can't remember).. I try flashing with FlashTool.. no go.. it seems to flash alright but when I boot the os.. the baseband still shows .56...
I try flashing DoomKernel V22.. and after a reboot I still see my old ICS Beta Kernel...
Am I doing something wrong here? All I want is a kernel that permits overclocking and Arconium 8.2...
Please help if you can... Thank you..

First install a clean .62 FW on your arc, then flash doomkernel v22. Go in recovery mode and install the wifi modules for v22. Now you go in fastboot mode and flash de baseband, after that go in recovery mode and install the baseband patch. Now you start your phone and look if everything is okay. After that you can install Arconium.

Thanks for the response Spit.. can you please clarify what you mean by fw .62?

PrimaryMaster said:
Thanks for the response Spit.. can you please clarify what you mean by fw .62?
Click to expand...
Click to collapse
The Firmware version i mean (The last two numbers of the build version). The kernel only works on FW:.42/.58/.62 from Gingerbread. U can use Flashtool to flash it. After that you flash the doomlord kernel.

A big problem

hello guys i'm from slovenia so and i don't know very well english to apologise
i have a big problem with my huawei i installed the cwm and wiped then i try installed cyanogenmod 9 but there was a problem installation was not successfully i was very confused so i downloaded the original 2.3 firmware from huawei.com and i paste orginal boot.img and recovery.img in pink screen then i try to instaled it but i've have pitcs but why i followed the instructions ( i formated the sc card and paste the rom in it) and then is a warnig whin an triangle update failed
so can anybody help me and tell me what can i do to fix this
Thank you !!!

wowww,wait a little.where did you find a cyanogenmod 9 rom? was it from another phone? if yes,maybe that's why the installation failed.
also,everything else you did was kinda wrong
i bet you can only try installing the official 2.3.5 firmware following the instructions included in huawei package and after that if the phone boots up correctly there are a lot of users here(including me) willing to help you

it was for this phone for the pro version and everything so what are is you'r proposal to do here ? can you give me please an custom (clockword and root images that you use and a rom that actually works i've have the pro version
Thanks !!!

I have the pro version too. I think I can help you.
Well the cwm I use is this one: http://sourceforge.net/projects/genoandroid/files/recovery5.0.2.7_en_u8800pro.img/download
Geno made it so big thanks to him
As for working Custom Roms check the U8800 Pro Android Development Section,try any ROM you want and just stick with the one that suits you better Be sure to try out aurora(from sakura), kalo rom, gkalenis rom(it has tv-out) and if you can my roms
Anyway.Try using the custom recovery.img I gave you with the boot.img from the rom you flashed(if the phone boots you are good to go). If the phone doesn't boot reinstall official firmware

so if i understand you for example i just downloaded you first rom and recovery that you gave me now i replace the recovery and that boot.img that is in MoihackB572GBFinal.zip ?

almost.replace with the boot.img from the cm9 rom you flashed previously(it's inside the zip file)
sorry i didn't make this clear
make sure the phone boots after replacing those files in pink screen. if it boots correctly everything else is pretty easy. the important thing here is to get your phone work again

Moihack you'r a genius it actually works and i lied it wasn't cm9 it was cm7 from geno ''cm-7.2.0-u8800pro-Geno-120604-final'' it's chinese-english but it works. so i have a question now which rom do you advise me and thanks a lot !!!

well glad i was able to help! you are welcome
my 2nd rom is based on the cm7 you tried but is free from all apps(only basic ones left) and is actually a pretty small one(about 60mb).you can try it if u want to
now the roms i like is the aurora ics from sakura(it is pretty stable and fast for ics) and horse absolute (made by gkalenis). horse rom also has tv-out option but you have to downgrade to 2.2,re-root,install cwm and flash it in order to work properly(otherwise camera use will cause reboot of the phone).
anyway.if you like ics,feel free to try aurora (don't try the official ics from huawei yet)
if you want froyo and tv-out go with horse rom
if you like gingerbread,well try my roms
btw i am cooking another 2 roms these days(a mokeeOS and a miui 2.3.30 ) so keep an eye on u8800 pro development section if you want