Hello, i need to uninstall Miui Gingerbread to install the official Gingerbread, i'm much more used to it, how can i do it?? Already tried to clean up the data and system and tried the Sam's firmaware last gingerbread but it would not worked.. Is it possible to downgrade to 2.2 and then install 2.3.3??
Greetings
Yes it is possible to downgrade for 2.3.3 to 2.2(.1 in my case)
I can't remember exactly how I did it, but I basically followed the instructions to install MIUI, but for a 2.2 ROM, so wiping data, system and cache, then flashing a darky ROM (but should work with any tbh)
Dead easy. Just install the Samsung Android 2.3.3 XWJVB ROM (link - http://www.theandroidsoul.com/how-to-install-xwjvb-gingerbread-rom-gaalxy-s/)
But before you install XWJVB, install the EZRom to remove/uninstall the MIUI. It's available in two versions, select the one you want:
Android 2.2 based EZRom - http://www.theandroidsoul.com/ezbase-ezrom-for-android-2-2-install-revert-back/
Android 2.3 based EZRom - http://www.theandroidsoul.com/ezbase-rom-v3-0-full-installation-guide-w-video/
Credits and Thanks to Nitr8 for great EZRoms
All you need to do it , Flash the Official GB FW , using Odin (Repartition just to be sure)
shivajibanerjee said:
All you need to do it , Flash the Official GB FW , using Odin (Repartition just to be sure)
Click to expand...
Click to collapse
+ check bootloader. And use 512 pit.
take a look at the darkys thread There's a complete solution for your problem. Just work the manual down and you'll gain the ultimate gingerbread experience in green Fully with root and deodexed and so on
Thanks a lot guys.. U guys rock...
Related
I am having some problems with the i9000 and it seems that i cannot find a solution for it , so i need help please.
1- I keep getting this error when i am installing any ROM
Cannot Access system/XEU
Cannot apply multi csc
2- I have a lot of applications that keeps force closing also on any ROMs
1- Aptoide ( version 2.4.3 and 2.5 )
2- Launcher Pro
3- Viber
4- Maps
5- Market
3- I cannot find alot of programs on the official google market
i - Whatsapp
ii- Network switcher
iii- google maps
iv - youtube
v- angry birds
vi - launcher pro
and alot more
4- Some applications are not even working on any ROM as well , regardless of the software version.
ex : Whatsapp
Fullscreen caller ID
copilot
Ndrive
The ROMS that i have tested and i found all the above problem ,
1- Juwe's Rom 4.3.1
2- Stock Gingerbread 2.3.4 I9000XXJVP
3- Stock Gingerbread 2.3.3 I9000XXJVO
4- Stock Gingerbread 2.3.3 I9000JPJV6
sorry I can not answer your question, but I have a question too, how do you flash the ROM ? since I use ODIN to change the ROM and never see any error messages . Am I wrong ?
Try doing a full wipe when you flash rom, are you installing over the correct base? Did you fully read up and gain t the knowledge before you started flashing?
GTi9000 insanitycm010/insaneglitch
slaphead20 said:
Try doing a full wipe when you flash rom, are you installing over the correct base? Did you fully read up and gain t the knowledge before you started flashing?
GTi9000 insanitycm010/insaneglitch
Click to expand...
Click to collapse
I always do a full wipe , and yes i usually read the entire posts before i start flashing any new ROMs
Hello everybody,
I'm trying to install a custom rom on a phone of a friend, an xperia x10i
I tried several rom, but the only one the seems to work is the MIUI rom, that unfortunately does not have any support for the camera...
I tried all the roms I found here, but except for the MIUI rom, all the other get stuck at the beginning, when the logo "sony ericcson appears.
Does anyone have any idea or suggestion?
Thank you very much
depends what your baseband is
do you follow the instructions?some need wiping before boot
try new miui.it has full working cam and extra swap ram.i just dont want my Android to look like
icrap.try this link
http://www.xperiax10.net/2011/08/12/tripnmiui-now-officially-on-the-miuiandroid-forums/
I want to port it on Lg optimus one, but i am not expert
josephnero said:
do you follow the instructions?some need wiping before boot
try new miui.it has full working cam and extra swap ram.i just dont want my Android to look like
icrap.try this link
http://www.xperiax10.net/2011/08/12/tripnmiui-now-officially-on-the-miuiandroid-forums/
Click to expand...
Click to collapse
that isn't what he's asking...
he's asking why only the miui rom will work.
I assume it is because he is trying gb roms with the wrong baseband and kernel
flash 2.3.3 stock rom via flashtool
then root it
then install xrecovery..
then any rom u like download and flash via
xrecovery.....
flash tool :- http://forum.xda-developers.com/showthread.php?t=920746
(PLZ DOWNLOAD THE LATEST FlashTool version 0.3.0.0)
Rooting and Installing Xrecovery :-
http://forum.xda-developers.com/showthread.php?t=1196808
(thanx to DooMLoRD)
some roms 2.3.3
http://forum.xda-developers.com/showthread.php?t=1192988
(WB-XPERIA TW Gingerbread)
http://forum.xda-developers.com/showthread.php?t=1222919
( FreeXperia Achotjan ARC_2.3.5)
http://forum.xda-developers.com/showthread.php?t=1213843
( CM7-ZMOD| 003 | Cyanogenmod 7 | 2.3.3)
Thank you very much for the help...
I'm running the last MIUI rom, but the camera is still not working :/
When I try to take a picture just crash it....
How do I know which baseband I'm using and which kernel I need?
Thank you in advance
The last Trip's Rom with .71 baseband is fully working (camera too)
http://android.modaco.com/topic/344807-rom-18-08-tripnmiui-iris-103235ub71/
hi all,
if i flash the 2.3.4. can i flash after any firmware coocked? I have already flashed it to 2.3.4 and when i try to fash any room coocked i have the phone in black screen and doesn't start. there is some problems about the update related to bootloder update ?
Long story short: if you flash the official 2.3.4 rom (kernel), you lose the option (at least at the moment) to downgrade it.
Since most of the current roms for the Milestone 2 (MIUI and CM7 - both "vanilla" by tezet and ICS themed by endless7) use the older kernel, you can't use them anymore.
You could try MS2Ginger by walter79, which is based on the 2.3.4 kernel (the Chinese one).
djlooka said:
Long story short: if you flash the official 2.3.4 rom (kernel), you lose the option (at least at the moment) to downgrade it.
Since most of the current roms for the Milestone 2 (MIUI and CM7 - both "vanilla" by tezet and ICS themed by endless7) use the older kernel, you can't use them anymore.
You could try MS2Ginger by walter79, which is based on the 2.3.4 kernel (the Chinese one).
Click to expand...
Click to collapse
I have just tried to flash MS2Ginger but at startup the phone stays with saver screen. Now, the
rsd motorola doesn't recognize the phone.
DO you have any solution?
thanks
I'm sorry, I have no clue...
djlooka said:
I'm sorry, I have no clue...
Click to expand...
Click to collapse
i'm not able to flash correctly the MD2 version.
I ve succesfull installed MS2 Ginger 2.0.
You have to restore nandroid backup but dont flash the fixed .fsb and do a complete wipe with the stock recovery !
That 's work !!!
Hi
im new to android ..
i own a ideos u8150.........and i have rooted it with z4 root
I also have managed to install clock world mod 3.0.2.4 i flashed it through pc (works perfectly)
now i want to change my stock rom ..i' heard ideos HD and droniX are good roms
i'd like to install droniX 0.6 raw ginger ..
but can anyone help me in flashing the rom i need a guide..
also how can i make full backups so i can revert to my stock rom anytime i want..
Does switching to custom roms affect baseband of my mobile ..
because of a picture i saw in a blog that says "baseband version :unknown" in mobile settings .
i have been a apple user and to jailbreak you need to preserve your basebands so is there anything like that in android
i have also read that after flashing dorinX .6 many see a black screen ..how can i prevent that..
i've also installed rom mangaer free version from market but its useless because everytime press any option it tells me to install colckworld mod and when i press install a list of phones comes up but u8150 is not in the list only 7 options.......
Thankyou
You won't get much love here as this is in the wrong forum, but here is a link to my rom:
http://forum.xda-developers.com/showthread.php?t=1375289
You dont need to use my rom, it just has flashing instructions in the first post.
*Good luck with ginger, it is still not stable, so maybe stick with 0.5.4.
*Baseband is not changed by flashing roms in CWM, only by official huawei update software, find a copy of yours before flashing if you can.
*CWM has the option to make a NAND backup under backup and restore.
*Dronix is good, Leandroidmod is ok, Ideos HD seems to be deprecated as I had bugs which I reported and have not been fixed so I switched roms. Has not had an update in months.
Here is the wiki page for u8150, have fun:
http://forum.xda-developers.com/wik...ei_U8150_IDEOS#Actively_Developed_Custom_ROMs
Hi,
I recently bought Defy MB525 mobile and it is under warranty till feb'13.
Below are current specs of my mobile-----
System version: Moto_version.34.3601.7.MB525.Retail.en.SEA15
Firmware version:2.2.2
Kernel Version: 2.6.32.9-g0671d13
Build number: JEM3.4.3-36-1.7
Camera Hardware: SOC
--------------------------------------------------
Please share the steps i should follow for 1) backup existing stock version 2.2.2, 2) overclock CPU, 3) upgrade to latest stable ICS version, 4)restore stock version 2.2.2.
Let me know if you need any other details.
Thanks
hi there
well to backup your stock rom first of all you need to root your phone with superoneclick google it.Then install latest 2nd init form here http://forum.xda-developers.com/showthread.php?t=1032212.after that reboot and when your phone blinks blue push vol down button to get into bootmenu.select custom recovery/backup all(to backup you rom)
3)either you download epsy/quarks ics build http://forum.xda-developers.com/showthread.php?t=1432100 or aopk http://forum.xda-developers.com/showthread.php?t=1585425 and the ics gapps.then move those to sd card and enter bootmenu again select wipe data/cache and install zip from sd card:chose one of the 2 above and the gapps after finish reboot and VOILA ics
How is camera in ICSROM?
camera works fine but panorama fc
Thank you, have some questions again
Thank you very much for replying, i am half journey way to start updating to ICS
i have downloaded epsy CM9-NIGHTLY-120406-Defy.zip, is it right one? is there a stable version?
when to overlock the cpu after installing ICS or can be done before?
I'm not sure if there's a stable CM9 release for Defy.
when to overlock the cpu after installing ICS or can be done before?
Click to expand...
Click to collapse
After the update..
I'm using 06.04 by Epsylon3 with Froyo kernel and green lens: I find it stable enough, good for day to day usage. There's no CM9 stable version, not even a RC one.
You can overclock the CPU from the bootmenu, although CM9 comes with 1GHz standard. Maybe undervolt it a bit.
Trimis de pe Defy CM9
Confused on updating android
I am bit confused updating android.. We are wiping the data and reloading a ICS right?? why do we need froyo kernel to update to ICS
Can you please share a link explaining it? reasons, procedures.
Rodefy said:
I am bit confused updating android.. We are wiping the data and reloading a ICS right?? why do we need froyo kernel to update to ICS
Can you please share a link explaining it? reasons, procedures.
Click to expand...
Click to collapse
We need froyo kernel because we have SOC (green) camera ;-(
So we need to flash CM7 kernel too. If you use CM9 kernel, then your SOC camera will not work
Procedures in this thread in the first post
I also had to flash ICS Gapps zip (somehow ommited in the procedure)
You can use mentioned nightly - works fine
I would propose to use titanium backup from the market to backup all your apps with data - then you can simply restore them back with all data inside (but your apps - do not restore system apps)