Database Users

[HOWTO] Restore to stock for root users and non-root users UPDATED 5/17/2011

Stop, listen. Follow my directions, if you fail to follow directions I will no longer help you. Don't PM me and ask. If you screw up ask in the thread.
Rooted Users (Non - Root Users scroll down below):
MR1 RUU
http://www.multiupload.com/KU7GSF2EY0
PG05IMG_MR1_no_hboot.zip - c64b4367086fff4f51ec3d5d766a0456
Bootloader (FLASH THIS LAST) FLASHING THIS WITHOUT SUCESSFULLY FLASHING THE ABOVE FILE WILL CAUSE A SECURITY WARNING
http://www.multiupload.com/26WG1UZCXR
abda920f3e159fb05c00d8c54a5b8768 - PG05IMG_hboot_1.4.0000.zip
Flash the above PG05IMG_MR1_no_hboot.zip to restore everything to stock + OTA BUT still will have the s-off bootloader.
Rename PG05IMG_MR1_no_hboot.zip as PG05IMG.zip, and flash through hboot (like in the root guide).
To restore the bootloader, rename PG05IMG_hboot_1.4.0000.zip as PG05IMG.zip and flash through the bootloader. DO NOT FLASH THIS unless you are absolutely sure PG05IMG_MR1_no_hboot.zip flashed to your device, without issue.
Now you are done, enjoy. If you screwed up, and got a security warning contact me, don't stress. Then again, don't screw up.
Non root users wanting to return to 1.12.605.6 (Stock, pre OTA) can continue below:
NOT FOR ROOT USERS
Taken from AndroidPolice: [Tutorial] How To "Un-Root" The HTC ThunderBolt And Return It To Stock. Please check the site out.
One of the most popular questions about rooting the ThunderBolt is how to undo the process and return to stock, which renews your eligibility for customer support. Well, here you go:
Instructions:
Please read the whole tutorial first, and pay attention to every detail. Note that your battery needs to be charged to at least 40% at the beginning of the process, and remember to check the MD5 sums of all downloaded files before diving in. As always, neither Android Police nor Team AndIRC are responsible for any damage this may cause to your phone, and, needless to say, returning to stock means you will no longer be able to use root apps like ShootMe and Titanium Backup.
First, download the following files:
Stock firmware (MD5 sum: 7141f5620f6128af77d50587e341f4b0)
exploits.zip (MD5 sum: 3b359efd76aac456ba7fb0d6972de3af)
Next, push exploits.zip and misc.img.
Code:
adb push misc.img /data/local/
adb push busybox /data/local/
adb shell chmod 777 /data/local/busybox
To gain root and flash misc.img:
Code:
adb shell
su
/data/local/busybox md5sum /data/local/misc.img
If the output is anything other than "c88dd947eb3b36eec90503a3525ae0de," stop and start over again.
Now let’s write misc.img:
Code:
dd if=/data/local/misc.img of=/dev/block/mmcblk0p17
Rename "PG05IMG_Mecha_VERIZON_WWE_1.12.605.6_Radio_1.16.00.0223r_NV_8k_1.41_9k_1.64_
release_174685_signed.zip" to "PG05IMG.zip" before placing it on your SD card.
Finally, reboot into bootloader mode by entering the following command. Allow the stock firmware to flash.
Code:
adb reboot bootloader
You’re done – your phone should now be stock, S-ON.

Bookmarking this, just in case. Thanks, Jcase!

Looks like I'll be going back to Froyo for now. I believe the Sense in GB leak is older than the stock on the device.. plus.. camera doesn't work, weather in clock widget doesn't work.. quadrant score is pretty low.. As for now.. I don't see any solid reason to upgrade to GB.. (though I wish I did).. sigh!

http://forum.xda-developers.com/showthread.php?t=1082114
Follow that to return to stock from gingerbread

I am getting No Image or Wrong Image Error In Final Step. I downloaded Stock Firmware Twice but same issue!

Can anyone help me out? I am not able to return to stock. I have BAMF remix 1.6.3 installed and trying to get back to stock as i have to send this device back to Verizon for replacement. I tried everything..file name is correct....md5 sum is correct however in final step when i tried to load the stock FW the boot-loader says wrong image!!
i downloaded stock FW from every possible source but no different!
Please Help!

If I wanted to unroot and use pre ota software? Would I have to perform both procedures or is there a way to go straight to the pre ota with s-on?

spjoneser said:
If I wanted to unroot and use pre ota software? Would I have to perform both procedures or is there a way to go straight to the pre ota with s-on?
Click to expand...
Click to collapse
Take the pre ota RUU, and make a custom ruu out of it without the hboot, and then proceed with the instructions in the first half.

jcase said:
Take the pre ota RUU, and make a custom ruu out of it without the hboot, and then proceed with the instructions in the first half.
Click to expand...
Click to collapse
First of all Jcase, thanks for the time, I know it's valuable to the community.
So just so I'm clear.... All I need to do is remove "hboot_7630_1.04.0000_110223.nb0" from the pre ota ruu or is there more to be altered than just that?
And if that's all I have to do is flash those seperate, could you tell me briefly why you could not just flash all at once? Would it not flash the rest of it if the stock hboot was installed first?

spjoneser said:
First of all Jcase, thanks for the time, I know it's valuable to the community.
So just so I'm clear.... All I need to do is remove "hboot_7630_1.04.0000_110223.nb0" from the pre ota ruu or is there more to be altered than just that?
And if that's all I have to do is flash those seperate, could you tell me briefly why you could not just flash all at once? Would it not flash the rest of it if the stock hboot was installed first?
Click to expand...
Click to collapse
Yes, because some radios seem to cause the files to flash in different orders, doing it like this keeps me from having to make multiple versions.
Sent from my LG Revolution

Question I have used the oneclick program to get ride of the NV recovery but I think im still rooted because I still see my superuser program on my stock 2.2. Can I just download Rom Manager and use clockwork Recovery to flash the Zips? I have to stock recover now which just formats the phone pretty much.

Androidfreakz said:
Question I have used the oneclick program to get ride of the NV recovery but I think im still rooted because I still see my superuser program on my stock 2.2. Can I just download Rom Manager and use clockwork Recovery to flash the Zips? I have to stock recover now which just formats the phone pretty much.
Click to expand...
Click to collapse
You need to consult the author of the program, because I don't know what it did, I can't support their application.
Sent from my LG Revolution

This flashes EVERYTHING back to stock? I have my boss tripping that his phone is bad after rooting it. I want to know if this reverts the baseband back to stock too?

AnalyzeFaith said:
This flashes EVERYTHING back to stock? I have my boss tripping that his phone is bad after rooting it. I want to know if this reverts the baseband back to stock too?
Click to expand...
Click to collapse
Reverts everything back to stock + OTA

Can I still use these steps to revert to stock after flashing the leaked Gingerbread Radio?

i am rooted and so i followed directions for first file and lost root.. so for the second file(its been forever since rooting) do i run adb commands( like step 6 for rooting) for install or can i use fastboot and bootloader? Does the second file bring root back?

Droid_ALM2ND said:
Can I still use these steps to revert to stock after flashing the leaked Gingerbread Radio?
Click to expand...
Click to collapse
yes
1234567890

droidrev71 said:
i am rooted and so i followed directions for first file and lost root.. so for the second file(its been forever since rooting) do i run adb commands( like step 6 for rooting) for install or can i use fastboot and bootloader? Does the second file bring root back?
Click to expand...
Click to collapse
Of course you lost root, this is for restoring to stock. It removes root.

jcase said:
Of course you lost root, this is for restoring to stock. It removes root.
Click to expand...
Click to collapse
well the good news is it works..the bad news is i didn't realize it was back to factory stock (like out of the box) which is very useful.. my bad.. so how do i install the bootloader file?

droidrev71 said:
well the good news is it works..the bad news is i didn't realize it was back to factory stock (like out of the box) which is very useful.. my bad.. so how do i install the bootloader file?
Click to expand...
Click to collapse
if you are S-off, you can just flash the MR1 upgrade from the root guide, otherwise you have to do a complete re-root.

Gingerbreak on 2.3.4

All,
I have updated to 2.3.4, lost root as expected and tried to reroot 2.3.4.
I had no luck, once i ran ./Gingerbreak the script would sit and not do anything after displaying the initial text.
Has anyone successfully done this?
I thought about updating with the prerooted 2.3.4, but the devs started to add all sorts of stuff in there, and right now that is not what I am after.
Thanks!

Also anxiously waiting for a 2.3.4 root option.
- No custom boot loader means I can't use the current SU.zip process.
- I didn't unlock the boot loader on the phone and now really don't want to go through the hassle of having the phone reset when I do... too much on it.
- Can't do a nandroid backup (to unlock) because I don't have root.
Catch 22 circle. Am keeping my eyes open, hopefully someone comes up with an alternate method. Once I get root again I will unlock the boot loader after making a backup so this doesn't happen again.

51Cards said:
Also anxiously waiting for a 2.3.4 root option.
- No custom boot loader means I can't use the current SU.zip process.
Click to expand...
Click to collapse
Custom bootloader? Just unlock the one you have and flash a new recovery. It takes a whopping 3 minutes to flash recovery, then SU, and reboot. If you want to keep everything stock so you can OTA, the stock ROM will overwrite the recovery when you boot and you'll end up with rooted stock ROM with OEM recovery. If you want to then flash a custom rom, you can do so through ROM manager.
Want to unroot? Download the FRG33 passimg.zip and boot into bootloader.
This stuff is stupid easy on the N1.

ATnTdude said:
Custom bootloader? Just unlock the one you have and flash a new recovery.
Click to expand...
Click to collapse
Ok so feeling like a newb here.
First I meant 'custom recovery', not 'custom boot loader'... mixup in terms on my part.
But to put in a custom recovery I need to unlock the phone. Once I unlock the boot loader doesn't the phone reset to factory state? I had seen that mentioned several times and in the unlock video I was watching. After the phone was unlocked it went back to "Welcome to Android" etc on the next startup. Have far too much in the phone I don't wish to loose and I can't Nandroid it without root.
Thanks for the info.

I had used Gingerbreak on my 2.3.3 - after 20 seconds of searching on XDA I found that you can simply install ROM Manager, flash RA custom recovery, boot into recovery, remove signature verification, flash update.zip followed by su.zip and you keep root .... all this WITHOUT an unlocked bootloader...

I am attempting to keep my phone as stock as possible and only root to block ads and sometimes push some new app that google wont release to the n1.
I really don't want to mess with custom anything on my daily driver (used for business also). I have my g1 for that
SO....has anyone used gingerbreak successfully on 2.3.4?

Disregard. I misread the post.

MitchRapp said:
I had used Gingerbreak on my 2.3.3 - after 20 seconds of searching on XDA I found that you can simply install ROM Manager, flash RA custom recovery, boot into recovery, remove signature verification, flash update.zip followed by su.zip and you keep root .... all this WITHOUT an unlocked bootloader...
Click to expand...
Click to collapse
Yeah, the ROM manager option would have worked well before I did the OTA for 2.3.4 and lost root. I will keep it in mind for the future, thanks!

I'm sure there's a better, faster, more direct way, but here's how I went from 2.3.4 stock to 2.3.4 rooted without unlocking the bootloader.
1. Flash FRG33 as passimg.zip on SD card.
2. Flash FRG33 to GRI40 as update.zip on SD card using stock recovery.
3. Root GRI40 2.3.3 using Gingerbreak.
4. Install ROM Manager app and install Clockworkmod Recovery.
5. Open GRI40 to GRJ22 update zip file and REMOVE Recovery folder from it.
6. Boot into Clockworkmod Recovery and flash modified update.zip from step 5.
7. Install SU.zip from Clockworkmod right.
Voila! Rooted GRJ22 2.3.4 with locked bootloader. Lot of steps, but I don't think it took more than 10-15 minutes.

Exactly what I did. Works smoothly and you're all set in minutes. As long as you had root in the first place, on 2.3.3.
Sent from my Nexus One using XDA Premium App

DownloaderZ said:
All,
I have updated to 2.3.4, lost root as expected
Click to expand...
Click to collapse
This was the same lesson I learned when I rushed in with Froyo --> GRI40 update the moment it became available. I lost my root and had to wait for Gingerbreak release. Now when they release OTAs, I wait until I understand how to keep the root under the new update before accepting it. Seems like a better approach to me.
Sent from my Nexus One using XDA App

GnatGoSplat said:
I'm sure there's a better, faster, more direct way, but here's how I went from 2.3.4 stock to 2.3.4 rooted without unlocking the bootloader.
1. Flash FRG33 as passimg.zip on SD card.
2. Flash FRG33 to GRI40 as update.zip on SD card using stock recovery.
3. Root GRI40 2.3.3 using Gingerbreak.
4. Install ROM Manager app and install Clockworkmod Recovery.
5. Open GRI40 to GRJ22 update zip file and REMOVE Recovery folder from it.
6. Boot into Clockworkmod Recovery and flash modified update.zip from step 5.
7. Install SU.zip from Clockworkmod right.
Voila! Rooted GRJ22 2.3.4 with locked bootloader. Lot of steps, but I don't think it took more than 10-15 minutes.
Click to expand...
Click to collapse
I'm looking to download all the files for this so I'm set from the start. I found FRG33 here but I haven't found the GRI40 update yet (although I haven't really looked yet either, that's not my question). I'm wondering, the site I listed has FRG83 as well as 33, does it matter which to use? 33 mentions a possible error.
What's the deal?
Thanks,

I think you should be able to use FRG83 instead. All you really need is something that can be named passimg.zip installed by the bootloader itself.
I got the GRI40 update from here:
http://android.clients.google.com/p...b119f8.signed-passion-ota-102588.656099b1.zip
GRI22 update:
http://android.clients.google.com/p....signed-passion-GRJ22-from-GRI40.71d2f9ec.zip

That sucked!!! I lost all my settings and apps when I moved back to froyo?? I wasn't expecting that

Oh yeah, I forgot about that. Flashing PASSIMG.zip wipes out everything because it's a full flash.

brettbellaire said:
That sucked!!! I lost all my settings and apps when I moved back to froyo?? I wasn't expecting that
Click to expand...
Click to collapse
There is no way to downgrade Android without wiping everything, as a downgrade is only possible with leaked shipped ROMS (i.e., ROMs that re-write the entire NAND flash memory on the device...

droidexplorer said:
This was the same lesson I learned when I rushed in with Froyo --> GRI40 update the moment it became available. I lost my root and had to wait for Gingerbreak release. Now when they release OTAs, I wait until I understand how to keep the root under the new update before accepting it. Seems like a better approach to me.
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
I do that as well now. However I have some steps I figured out that work for me. It's more direct (only 2 flashes, plus su), but you have to pay attention. If you didn't already have a CWM backup though, it will wipe everything:
1) Flash to FRG33 using PASSIMG_Passion_Google_WWE_2.16.1700.1_FRG33_release_signed.zip (rename to PASSIMG.ZIP), takes you to 2.2
2) Root using Super-One-Click
3) Install ROM Manager and flash CWM
4) Flash b90257ed8cd3.signed-passion-GRJ22-from-FRG33-121341.b90257ed.zip, takes you directly to 2.3.4
5) DON'T LET PHONE REBOOT into Android, go to recovery then Flash su-2.3.6.1-ef-signed.zip
6) Remove/rename /system/etc/install-recovery.sh via ADB
7) If you have a recent backup, use CWM to 'advanced restore' the data portion.
8 ) Profit! (or root)
Step 5 may require explanation:
Android will reboot at least once during the flash, this is ok, as it loads right back into recovery. However after the second reboot, it will boot normally. You must INTERRUPT this boot process (hold power button, battery pull, etc). At this point CWM is still on there (don't know why, I thought flash was going to wipe it).
The reason you have to interrupt the boot process (for anyone who doesn't know) is because of the install-recovery.sh script. Stock android will automatically flash the stock recovery on bootup.
So boot into CWM, then flash su. After bootup up again, CWM will be gone, but we have root! So remove (I renamed) that file (/system/etc/install-recovery.sh), then reflash CWM using ROM Manager.
EDIT: After posting this, I had a thought: it should be possible to remove install-recovery.sh via CWM using ADB. That would remove the step of reflashing CWM a second time. I updated the step-by-step, but left the explanation as-is.
When I originally wrote these steps a few months ago, gingerbreak wasn't released. So I don't rely on it.

Just wondering, but would you always be safe and able to root by flashing SU.zip if you just never let it overwrite the custom recovery?
I thought you can always pull out the Recovery folder from the update zip file and it won't overwrite your custom recovery. Granted, that will require you to download updates manually rather than OTA, but that's easy enough.

GnatGoSplat said:
Just wondering, but would you always be safe and able to root by flashing SU.zip if you just never let it overwrite the custom recovery?
I thought you can always pull out the Recovery folder from the update zip file and it won't overwrite your custom recovery. Granted, that will require you to download updates manually rather than OTA, but that's easy enough.
Click to expand...
Click to collapse
In theory. It does seem to work for other devices (gTablet). I haven't had much luck with modifying the updater-script inside the zip file however. Whenever I change one, I get errors when I flash the zip. That's why I haven't tried that method.
I wanted to make my own flashable zips to tweak ROMs on my own, but never could get it to work, so I abandoned my work.
In addition though, you could just try to replace the recovery.img in the zip file with CWM. That might work too, as long as signature verification is off. I don't remember if I tried that.
EDIT: Forgot one key thing: Doing this won't prevent the OS from reflashing the stock back anyway on bootup (using install-recovery.sh). You MUST remove that file regardless, if you're on a stock ROM. If you want to remove that from the zip you can, but again requires updater-script changes. However if you want to OTA, then I'd recommend just renaming it, since some OTA's update that file. That way you can rename it back for the update.

On the GRI40 to GRJ22 update, I didn't have to do anything too complicated like modifying scripts. I simply yanked the Recovery folder out of the update and that seemed to do the trick with no error messages and CWM still intact.

[GUIDE] Install ClockworkMod Recovery image after updated to 2.3.4 (GRJ22).

Not applicable
Delete this thread

Hello, thanks for the post.
I got a brand new Nexus S, I got a update direct from Google so I just flash it to GRJ22 :-(. I follow your guide (I have to do the step 1/2 in the other post you refer). Now I got clockwork done. But everytime I restart my phone, I always boot into clockwork. I try to 'mount sdcard' and reboot, but still boot into clockwork. How can I boot into the stock ROM?
many thanks!!

Too complicated.
Just:
1. turn on phone by holding volume up + power to go to bootloader
2. fastboot oem unlock (confirm it on the phone)
3. fastboot flash recovery recoveryfilename.img
4. Select recovery on the phone.
5. You're in ClockworkMod. Go flash a new ROM.

Let me answer myself.
I don't think the latest rom 2.3.4 is compatible with the clockwork you supplied. So I have to flash my phone back to GRH78. I downloaded the stock ROM from the internet. and then push all the images file into /sdcard/clockworkmod/backup/2010.xxx.
Next, I restore the image in clockwork menu.
after restore, reboot the phone, now I am back in business.
When the phone is boot, i lost the root again, so i went to modaco.com and get Paul's package. run it, restart, I got the root.
Finally, go to market place and get ROM Manager, install the clockwordmod. and I have a 'proper' phone.
although I don't have the least rom, at least i got a working phone that is rooted.

bante said:
Hello, thanks for the post.
I got a brand new Nexus S, I got a update direct from Google so I just flash it to GRJ22 :-(. I follow your guide (I have to do the step 1/2 in the other post you refer). Now I got clockwork done. But everytime I restart my phone, I always boot into clockwork. I try to 'mount sdcard' and reboot, but still boot into clockwork. How can I boot into the stock ROM?
many thanks!!
Click to expand...
Click to collapse
I have the same problem. How did you handle it?

Wow, why risk messing up your phone with flashing a boot.img when you can just rename /etc/install-recovery.sh to something like /etc/install-recovery.bak?
Here's one way to rename (courtesy of Matridom). Another is to use Root Explorer.
Matridom said:
The new update applies the install-recovery.sh script into our phones (not there previously.
Boot into the bootloader
flash CWM
select recovery from the bootloader (DO NOT reboot the phone)
apply the su binary
boot into the OS and test root
make sure busybox is properly installed
run ADB shell
then:
Code:
su
mount -o remount,rw /dev/block/mtdblock3 /system
mv /system/etc/install-recovery.sh /system/etc/install-recovery.bak
Boot back into the bootloader and re-flash CWM, should stay permanent now.l had applied the SU binary at the same time as the OTA update, then renamed the installer script and flashed back CWM.
Click to expand...
Click to collapse

andnaz said:
I have the same problem. How did you handle it?
Click to expand...
Click to collapse
same here someone please help ?

This is a totally unorthodox way to make the custom recovery permanent. If your phone is messed up, good luck fixing it.
There is a much easier and safer way like I mentioned.
PS: flashing recovery for 2.3.4 is the exact same as for 2.3.3!
fastboot flash recovery <recovery .img>
Sent from my Nexus S using XDA App

bante said:
Hello, thanks for the post.
I got a brand new Nexus S, I got a update direct from Google so I just flash it to GRJ22 :-(. I follow your guide (I have to do the step 1/2 in the other post you refer). Now I got clockwork done. But everytime I restart my phone, I always boot into clockwork. I try to 'mount sdcard' and reboot, but still boot into clockwork. How can I boot into the stock ROM?
many thanks!!
Click to expand...
Click to collapse
Hi Bante, I am sorry for the inconvenience. I have revert back the CWM Recovery to 3.0.2.4. You can download it at the link above, and try it again
I hope that the problem you mention wont persist anymore

zero383 said:
This is a totally unorthodox way to make the custom recovery permanent. If your phone is messed up, good luck fixing it.
There is a much easier and safer way like I mentioned.
PS: flashing recovery for 2.3.4 is the exact same as for 2.3.3!
fastboot flash recovery <recovery .img>
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
I am sorry but not all people can successfully use Command Prompt to do so.
I cant use command prompt, as it says "Image cant be loaded".
So I had to use this method.
I search around the forum and seen this as a quite common problem,
so I decided to share it
Hope you understand.
Anyway, thanks for your method too Cheers

andnaz said:
I have the same problem. How did you handle it?
Click to expand...
Click to collapse
The CWM Recovery I supplied is version 3.0.2.5,
which is not compatible.
So I replaced with version 3.0.2.4.
You just download it at the link above and follow all the step again.
You should able to solve this problem
Do notify me if any problem persist

16vMK1 said:
same here someone please help ?
Click to expand...
Click to collapse
The CWM Recovery I supplied is version 3.0.2.5,
which is not compatible.
So I replaced with version 3.0.2.4.
You just download it at the link above and follow all the step again.
You should able to solve this problem
Do notify me if any problem persist

Wow people like to make things complicated. Why install an entire rom to get ride of a script?
if you can flash cwm, you should have some basic understanding of fastboot, adb and the search options in the forums. the answers are all there already.
Sent from my Nexus S

No disrespect, I agree flashing recoverys should only be done after you understand how to use the tools to do it. there is no reason someone who is going to mod systems on their nexus shouldn't be able to use fastboot and adb properly. all the right drivers are in the sdk.
Sent from my Nexus S 4G using Tapatalk

nxt said:
Too complicated.
Just:
1. turn on phone by holding volume up + power to go to bootloader
2. fastboot oem unlock (confirm it on the phone)
3. fastboot flash recovery recoveryfilename.img
4. Select recovery on the phone.
5. You're in ClockworkMod. Go flash a new ROM.
Click to expand...
Click to collapse
This is what I did.
I rooted my NS, which had 2.3.3
Used phone with stock 2.3.3 until I figured out which ROM I want to flash.
Before I flashed any ROM, did a Nandroid Backup through CWM.
Used the ROM for a few days, but when I saw that official update is ready for download for i9020A, did do a restore from the Nandroid backup I created.
Updated from 2.3.3 to 2.3.4, phone works fantastic, video chat also works great.
After update when I tried using any of the apps required SU permission, they didn't work. I tried installing a couple of .apk files, couldn't either install it or after installation it didn't work.
Thought let me try wiping my phone clean and start all over again, may be I will use a custom ROM again, downloaded ROM, went to ROM Manager to reboot into recovery, nothing happens.
Tried booting into Recovery option manually by pressing Volume Up and Power button, nothing happens but the Bot with an Arrow appears on screen.
So, I thought I will follow this procedure to reflash CWM to my phone and get it going. I was able to use the command FastBoot once, and suceeded pushing .img file to my phone but now whenever I try using the commands from my computer, this error message appears : "This application has failed to start becasue AdbWinApi.dll was not found. Re-installing the application may fix this problem."
Why this error message if I have the sdk on my computer already through which I was once able to push .img file without any troubles?
Can anyone tell me what would be a possible solution?
Also, how can I fix this problem and get ClockWorkMod Recovery installed on my NS again?
How can I get stock recovery image on my phone if I want start all over again from scratch?
Thx a million.
Edit ::: I found the answer as to how to how to install CWM again. Thx anyways.
Other question still remains a puzzle... why am I not able to install certain programs or if did manage to install, can't run them?

I ran your method and I think I'm stuck at some step...
My phone now default boots into CWM 3.0.2.4
Recovery boots to a newer recovery I flashed.
How do I get my phone to default boot into the OS again?
Edit: nevermind, just downloaded the full 2.3.4 rom, extracted and flashed the original boot.img.

dreamsforgotten said:
All the right drivers are in the sdk.
Click to expand...
Click to collapse
After installing the sdk and a platform, I have adb, but where is fastboot?

I was getting the same error as "Image cant be loaded". after hours of struggling I found that It's only because I was not in the same directory as the img file. silly eh?

hi,did you repaiar your phone,i have try everything but it just keep going in clockwork mode,if i than pres reboot now in clockworkmode it stays on google padlock
i realy need phone if you can help or someone else,than ....

just tried this method of window7 (thanks for the work) with cwm 3.0.2.4, but got the same result like the others in this thread: cant boot the android 2.3.4, the system is always booting into the cwm, no way out.
I don't think this tool works as it should.
:-(
EDIT:
I didn't realize that window7's tool would install the cwm into the boot-partition instead of the recovery-partition.
To get my boot partition back I downloaded the 2.3.4 firmware image from http://forum.xda-developers.com/showthread.php?t=1056062 and extracted the boot.img from the zip.
with "fastboot flash boot boot.img" I restored my orginal boot partition an can boot into android again.
(fastboot is part of the android sdk)

[Q] S=off but can't root

Please help, I'm trying to root so I can run netflix on mt4g, almost there (i think)
Tysvm2: the folks that wrote: the true root article @
http://forum.xda-developers.com/showthread.php?t=858996
I am trying to flash a custom recovery and rom (hoping to do: panache or CM7 and twrp recovery
(PG86IMG.zip) My end goal is to run netflix app on htc glacier)
I have succeeded in setting up ADB/SDK drivers, etc.
On hboot i see: S=off
I am having a PROBLEM with TRUE ROOT gfree method
At step 12. It says:
"If this is the first time you have rooted your device you will need to run visionary again (temproot w/set system r/w after root checked and then attempt permroot) to make root privileges permanent and then reboot again. Now "su" should work properly for you."
I've run into a problem :
I restarted in hboot and I see s=off but when I try to open terminal:
It reads:
$ export PATH=/data/local/bin:$PATH
$su
PERMISSION DENIED
I tried to run temproot and permroot on visionary + R14 to "seal the deal" & move onto install of the engineering bootloader
It appears I am stuck in between temproot and perm root won't stick for some reason ...
FYI: all sorts of apps force closed immediately after reboot after I ran the reboot it says s=off and has bootloader version 0.86.0000
I just did:
1. a factory reset from hboot
2. Reinstalled visionary + R14
3. And ... astro file manager, terminal emulator app and easy installer, etc
4. i have all the files that the TRUE ROOT thread reccomended but terminal emulator says permission denied when I type: su
PERMISSION DENIED
It looks to me like visionary Is not properly establishing temp root or perm root after s=off.
Suggestions please.
thank you,
CP
HTC GLACIER
s=off
bootloader version 0.86.0000
also: HTC DREAM aka Tmobile g1 rooted with cyanogen old school
Ps: I'm new to the forum culture and I want to be sure to be respectful and post properly; if this is not a proper place for this kind of question please redirect me patiently

Try the older verson of Visionary. R11 I believe. This has come up before and it has worked for other people.

If you have already received the OTA, use Gingerbreak or fre3vo method for temp root instead of Visionary.
I suggest to flash engineering bootloader ASAP, it'll save you the question next time, by allowing to flash custom recovery (thus enabling root by flashing any su.zip package) at any time, independent of the ROM.

I got a replacement phone, and this is what I had to do...
1. Install Visionary r14 and Terminal Emulator
2. Download gfree file and move to phone
3. Temproot (with r/w switched on), then su on TE, then run gfree*
4. Reboot and validate S=OFF
5. Temproot again (with r/w switched on), then click on Permroot

Hi Thank you for your reply, I tried visionary r11 but when I installed it would not run (perhaps i installed the wrong one) my easy install app read it as visionary 1.0 is that the same as R11?

Thank you for your reply but i tried this:
http://forum.xda-developers.com/showthread.php?t=1030119
from Shaddy-Z.(10th April 2011, 01:35 PM) <- thank you Shaddy
"
http://forum.xda-developers.com/show...&postcount=899
It's the last download link."
But my easy install app calls it visionary 1.0 (is that the same as R11?) And it did not work ... it won't even open up, can you tell me do you have any experience with:
Jack R_1's suggestion: "If you have already received the OTA, use Gingerbreak or fre3vo method for temp root instead of Visionary."
What are benefits of gingerbreak vs. fre3vo? I just want to be sure to be careful so as to not brick my baby.

If you already have Radio S-OFF, have you tried flashing custom recovery via fastboot flash recovery? Or does your bootloader version not allow that?
Also try this post:
http://forum.xda-developers.com/showpost.php?p=15943010&postcount=6

I only know about gingerbreak not the other one, it will use a new exploit to gain perm root under gingerbread. But if you have the new OTA that's gingerbread 2.3.4 I think it won't work. Others have upgraded to the new OTA and can't root again, why? Since a new Radio and I think SPL are in this new OTA. And HTC has used a new security method to prevent such things as rooting.
Check this thread
http://forum.xda-developers.com/showthread.php?t=1174344

Flash the .85 engineering bootloader with adb and then clockworkmod from fastboot. You then can use the rooted nandroid backup in rom Bible (if you want to stay stock). Once you do that happy flashing. If you need any help pm me
Sent from my Google Nexus 12! yup I'm from the future

mark manning said:
Flash the .85 engineering bootloader with adb and then clockworkmod from fastboot. You then can use the rooted nandroid backup in rom Bible (if you want to stay stock). Once you do that happy flashing. If you need any help pm me
Sent from my Google Nexus 12! yup I'm from the future
Click to expand...
Click to collapse
Are you sure this holds true for users with newest OTA?

Ace42 said:
Are you sure this holds true for users with newest OTA?
Click to expand...
Click to collapse
As long as he has s-off it will.
Sent from my Google Nexus 12! yup I'm from the future

Ace42 said:
Are you sure this holds true for users with newest OTA?
Click to expand...
Click to collapse
Wait, he can't gain even temp root huh. NM your sol until a dev figures out how to root the gingerbread rom.
Its kind of a long shot. Since you have s-off you can try using the PD15IMG.ZIP from hboot and root the froyo rom. Not sure if that will work or not
Sent from my Google Nexus 12! yup I'm from the future

mark manning said:
Wait, he can't gain even temp root huh. NM your sol until a dev figures out how to root the gingerbread rom.
Its kind of a long shot. Since you have s-off you can try using the PD15IMG.ZIP from hboot and root the froyo rom. Not sure if that will work or not
Sent from my Google Nexus 12! yup I'm from the future
Click to expand...
Click to collapse
I'm using MIUI, I was asking cause I have a friend who's stuck on the new OTA since they accidentally flashed the non-rooted version of the OTA, probably since all of them had the same title and he didn't read...

Okay let me ask this: What about packing an unsigned PD15IMG.zip with ENG HBOOT and/or ClockworkMod Recovery and nothing else inside it? If you have Radio S-OFF, this image should be accepted by the bootloader and give you a route back to root.
I don't know if such a .zip has been made yet for the MT4G but it's not impossible. It's been done for the S-OFF Sensation:
http://forum.xda-developers.com/showthread.php?t=1122053
See "ENG Hboot" - there is a PG58IMG.zip file there, and there is another under "Here is the download link to recovery".
Again this thread has nothing to do with the MT4G but it's the same principle.
So... if there is anyone out there who knows how to pack a PD15IMG.zip for a Radio S-OFF device, please speak up and help out the OP!

Interesting, I think all you need to do is replace the file inside of zip but not totally sure.
Sent from my Google Nexus 12! yup I'm from the future

What I don't know is if the zip has to be constructed in some particular way to be accepted as valid, even with S-OFF. But yeah, there should be a way to flash CWM to the S-OFF bootloader.
Sent from my Nexus One using Tapatalk

Thank you but I don't know what that is exactly.
Ru suggesting I restart holding down on volume and select recovery from hboot?
Sent from my HTC Glacier using XDA App

crouchingpossum said:
Thank you but I don't know what that is exactly.
Ru suggesting I restart holding down on volume and select recovery from hboot?
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
No not yet, gonna try to figure something out for you tomorrow. Be patient please
Sent from my Google Nexus 12! yup I'm from the future

Are you on 2.2.1 or are you on 2.3.?

Okay I'm just poking around blindly in the dark here... I'm not a developer, just a script tinkerer... but if you're brave enough...
I grabbed one of the PD15IMG.zip radio files from the Dev section just to obtain the proper android-info.txt file. Then I created a new zip containing only:
- android-info.txt
- CWM version 3.0.2.4 for Glacier, in .img format, renamed to recovery.img
I've attached it here. Rename it to PD15IMG.zip, put it on the root of your SD, and try booting into HBOOT and see if it prompts you to install the zip. If so, does it succeed?
If yes, then try booting into recovery. Do you get Clockwork?
If it does not succeed, please report any error messages.
I highly doubt this can damage your phone because your ROM is still bootable and your bootloader still works, so the worst you could get is a bad recovery that you have to fix up. But I hold no liability for anything that gets borked

[Q] Rooting GingerBread 2.3.4 on HTC G2

Hey everybody, I need some help perm rooting my HTC G2. Im using these instructions to permroot my G2. http://forum.xda-developers.com/showthread.php?t=1206930
Im stuck on this section....
Save the attached files (PC10IMG.zip & su.zip) to your sdcard. Reboot into the bootloader either by using the adb command adb reboot bootloader or by powering off, and then holding Vol-Down+Power.
The bootloader will scan for PC10IMG.zip and then ask you if you want to flash the recovery. Yes! You do!
After this, reboot the phone. Reboot into recovery by using the adb command adb reboot recovery, or booting back into the bootloader and navigating to the Recovery console (if you didn't delete the PC10IMG.zip, bootloader will scan it, but don't let it update again, this is redundant).
Once you are in ClockworkMod, navigate to "install zip from sdcard", then to "choose zip from zip card". Select the su.zip file from the list, and authorize the recovery console to flash the zip. Reboot the phone.
Now, you will see the coveted SuperUser app in your drawer. I figured this was wayyyy to easy to have worked, so I tested some root dependent apps, they work flawlessly. I also used the adb command adb shell followed by su once in the shell. SuperUser requested my permission and after granting it, I am able to remove the bloatware that was replaced during the downgrade, also, rebooting the phone as normal and from a removed battery does not remove this root. So I'll say it's a permaroot.
I compiled the attached files specifically for this. The ClockworkMod Recovery version is 3.0.2.4, SuperUser version is 2.3.6.1.
I currently have my G2 with S-OFF and a stock Gingerbread 2.3.4. I have the PC10IMG.zip and su.zip in the root or directly in my sdcard. In no folders im trying to say... I reboot into the bootloader. The bootloader will scan for PC10IMG.zip and then ask you if you want to flash the recovery. Yes! You do!
Well when I do it it doesnt ask me to "flash the recovery" it says "Parsing....(SD ZIP)
(1) RECOVERY
Do you want to start the update?
<VOL UP> YES
<VOL DOWN> NO
I accept the update by pressing vol. up. It comes back and says Update comeplete... - OK
Press Power to Reboot
I reboot and get into clockworkmod it says click "install zip from sdcard" I click it and a little hat appears but it doesnt do anything from there. I let it set a couple of min but still nothing... I have to pull battery out to get it to reboot. help pls....
Sean...

slufoot69 said:
Hey everybody, I need some help perm rooting my HTC G2. Im using these instructions to permroot my G2. http://forum.xda-developers.com/showthread.php?t=1206930
Im stuck on this section....
Save the attached files (PC10IMG.zip & su.zip) to your sdcard. Reboot into the bootloader either by using the adb command adb reboot bootloader or by powering off, and then holding Vol-Down+Power.
The bootloader will scan for PC10IMG.zip and then ask you if you want to flash the recovery. Yes! You do!
After this, reboot the phone. Reboot into recovery by using the adb command adb reboot recovery, or booting back into the bootloader and navigating to the Recovery console (if you didn't delete the PC10IMG.zip, bootloader will scan it, but don't let it update again, this is redundant).
Once you are in ClockworkMod, navigate to "install zip from sdcard", then to "choose zip from zip card". Select the su.zip file from the list, and authorize the recovery console to flash the zip. Reboot the phone.
Now, you will see the coveted SuperUser app in your drawer. I figured this was wayyyy to easy to have worked, so I tested some root dependent apps, they work flawlessly. I also used the adb command adb shell followed by su once in the shell. SuperUser requested my permission and after granting it, I am able to remove the bloatware that was replaced during the downgrade, also, rebooting the phone as normal and from a removed battery does not remove this root. So I'll say it's a permaroot.
I compiled the attached files specifically for this. The ClockworkMod Recovery version is 3.0.2.4, SuperUser version is 2.3.6.1.
I currently have my G2 with S-OFF and a stock Gingerbread 2.3.4. I have the PC10IMG.zip and su.zip in the root or directly in my sdcard. In no folders im trying to say... I reboot into the bootloader. The bootloader will scan for PC10IMG.zip and then ask you if you want to flash the recovery. Yes! You do!
Well when I do it it doesnt ask me to "flash the recovery" it says "Parsing....(SD ZIP)
(1) RECOVERY
Do you want to start the update?
<VOL UP> YES
<VOL DOWN> NO
I accept the update by pressing vol. up. It comes back and says Update comeplete... - OK
Press Power to Reboot
I reboot and get into clockworkmod it says click "install zip from sdcard" I click it and a little hat appears but it doesnt do anything from there. I let it set a couple of min but still nothing... I have to pull battery out to get it to reboot. help pls....
Sean...
Click to expand...
Click to collapse
may sound stupid to say lol but are you hitting the power button or the optical pad button..if you hit power i noticed sometimes it would show the gear with the hat on..try selecting with the optical button instead

Tbbo514 said:
may sound stupid to say lol but are you hitting the power button or the optical pad button..if you hit power i noticed sometimes it would show the gear with the hat on..try selecting with the optical button instead
Click to expand...
Click to collapse
DUDE YOUR THE MAN!!!!!!! This was my first root, bad thing was I upgraded to Gingerbread 2.3.4 before getting S-OFF so I had to downgrade too Froyo 2.2 and go thru all the mumbo jumbo of getting S-OFF and Perma Root. Then reflash Froyo 2.2 with S-OFF so I could upgrade to Gingerbread 2.3.4.
You know how many hours Ive spent on this the last 2 days LMAO to get stuck on the last step in CWM because I was hitting the power button instead of the OPTICAL button lol. My brain was so fried last night. Almost bounced my phone off the wall... Thanks again... +1 for you...
Sean...

How do I give you a +1? Ive seen people do it on here several times. Sorry im new to this forum...
Sean..

slufoot69 said:
How do I give you a +1? Ive seen people do it on here several times. Sorry im new to this forum...
Sean..
Click to expand...
Click to collapse
lol you got it dude. and no problem at all i hate how when someone has a question and no one answers it can be frustrating sometimes. but glad it all worked out for you. hope you didnt have to do some over complicated method lol seems like there are 50 million different ways to root it huh?

anyone curious about the downgrading procedure can check this article out. i know everyone gets tired of reading thirty different methods but this one works no complicated directions and explanations of everything
http://techticians.com/index.php/mobile-tech/14-mobile-phones/27-rooting-the-t-mobile-g2

Tbbo514 said:
lol you got it dude. and no problem at all i hate how when someone has a question and no one answers it can be frustrating sometimes. but glad it all worked out for you. hope you didnt have to do some over complicated method lol seems like there are 50 million different ways to root it huh?
Click to expand...
Click to collapse
Ohhh yea tell me about it. like i said my brain was fried lol

Tbbo514 said:
anyone curious about the downgrading procedure can check this article out. i know everyone gets tired of reading thirty different methods but this one works no complicated directions and explanations of everything
http://techticians.com/index.php/mobile-tech/14-mobile-phones/27-rooting-the-t-mobile-g2
Click to expand...
Click to collapse
Yep same downgrade method I used, just go step by step and it will work for ya...