Not applicable
Delete this thread
Hello, thanks for the post.
I got a brand new Nexus S, I got a update direct from Google so I just flash it to GRJ22 :-(. I follow your guide (I have to do the step 1/2 in the other post you refer). Now I got clockwork done. But everytime I restart my phone, I always boot into clockwork. I try to 'mount sdcard' and reboot, but still boot into clockwork. How can I boot into the stock ROM?
many thanks!!
Too complicated.
Just:
1. turn on phone by holding volume up + power to go to bootloader
2. fastboot oem unlock (confirm it on the phone)
3. fastboot flash recovery recoveryfilename.img
4. Select recovery on the phone.
5. You're in ClockworkMod. Go flash a new ROM.
Let me answer myself.
I don't think the latest rom 2.3.4 is compatible with the clockwork you supplied. So I have to flash my phone back to GRH78. I downloaded the stock ROM from the internet. and then push all the images file into /sdcard/clockworkmod/backup/2010.xxx.
Next, I restore the image in clockwork menu.
after restore, reboot the phone, now I am back in business.
When the phone is boot, i lost the root again, so i went to modaco.com and get Paul's package. run it, restart, I got the root.
Finally, go to market place and get ROM Manager, install the clockwordmod. and I have a 'proper' phone.
although I don't have the least rom, at least i got a working phone that is rooted.
bante said:
Hello, thanks for the post.
I got a brand new Nexus S, I got a update direct from Google so I just flash it to GRJ22 :-(. I follow your guide (I have to do the step 1/2 in the other post you refer). Now I got clockwork done. But everytime I restart my phone, I always boot into clockwork. I try to 'mount sdcard' and reboot, but still boot into clockwork. How can I boot into the stock ROM?
many thanks!!
Click to expand...
Click to collapse
I have the same problem. How did you handle it?
Wow, why risk messing up your phone with flashing a boot.img when you can just rename /etc/install-recovery.sh to something like /etc/install-recovery.bak?
Here's one way to rename (courtesy of Matridom). Another is to use Root Explorer.
Matridom said:
The new update applies the install-recovery.sh script into our phones (not there previously.
Boot into the bootloader
flash CWM
select recovery from the bootloader (DO NOT reboot the phone)
apply the su binary
boot into the OS and test root
make sure busybox is properly installed
run ADB shell
then:
Code:
su
mount -o remount,rw /dev/block/mtdblock3 /system
mv /system/etc/install-recovery.sh /system/etc/install-recovery.bak
Boot back into the bootloader and re-flash CWM, should stay permanent now.l had applied the SU binary at the same time as the OTA update, then renamed the installer script and flashed back CWM.
Click to expand...
Click to collapse
andnaz said:
I have the same problem. How did you handle it?
Click to expand...
Click to collapse
same here someone please help ?
This is a totally unorthodox way to make the custom recovery permanent. If your phone is messed up, good luck fixing it.
There is a much easier and safer way like I mentioned.
PS: flashing recovery for 2.3.4 is the exact same as for 2.3.3!
fastboot flash recovery <recovery .img>
Sent from my Nexus S using XDA App
bante said:
Hello, thanks for the post.
I got a brand new Nexus S, I got a update direct from Google so I just flash it to GRJ22 :-(. I follow your guide (I have to do the step 1/2 in the other post you refer). Now I got clockwork done. But everytime I restart my phone, I always boot into clockwork. I try to 'mount sdcard' and reboot, but still boot into clockwork. How can I boot into the stock ROM?
many thanks!!
Click to expand...
Click to collapse
Hi Bante, I am sorry for the inconvenience. I have revert back the CWM Recovery to 3.0.2.4. You can download it at the link above, and try it again
I hope that the problem you mention wont persist anymore
zero383 said:
This is a totally unorthodox way to make the custom recovery permanent. If your phone is messed up, good luck fixing it.
There is a much easier and safer way like I mentioned.
PS: flashing recovery for 2.3.4 is the exact same as for 2.3.3!
fastboot flash recovery <recovery .img>
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
I am sorry but not all people can successfully use Command Prompt to do so.
I cant use command prompt, as it says "Image cant be loaded".
So I had to use this method.
I search around the forum and seen this as a quite common problem,
so I decided to share it
Hope you understand.
Anyway, thanks for your method too Cheers
andnaz said:
I have the same problem. How did you handle it?
Click to expand...
Click to collapse
The CWM Recovery I supplied is version 3.0.2.5,
which is not compatible.
So I replaced with version 3.0.2.4.
You just download it at the link above and follow all the step again.
You should able to solve this problem
Do notify me if any problem persist
16vMK1 said:
same here someone please help ?
Click to expand...
Click to collapse
The CWM Recovery I supplied is version 3.0.2.5,
which is not compatible.
So I replaced with version 3.0.2.4.
You just download it at the link above and follow all the step again.
You should able to solve this problem
Do notify me if any problem persist
Wow people like to make things complicated. Why install an entire rom to get ride of a script?
if you can flash cwm, you should have some basic understanding of fastboot, adb and the search options in the forums. the answers are all there already.
Sent from my Nexus S
No disrespect, I agree flashing recoverys should only be done after you understand how to use the tools to do it. there is no reason someone who is going to mod systems on their nexus shouldn't be able to use fastboot and adb properly. all the right drivers are in the sdk.
Sent from my Nexus S 4G using Tapatalk
nxt said:
Too complicated.
Just:
1. turn on phone by holding volume up + power to go to bootloader
2. fastboot oem unlock (confirm it on the phone)
3. fastboot flash recovery recoveryfilename.img
4. Select recovery on the phone.
5. You're in ClockworkMod. Go flash a new ROM.
Click to expand...
Click to collapse
This is what I did.
I rooted my NS, which had 2.3.3
Used phone with stock 2.3.3 until I figured out which ROM I want to flash.
Before I flashed any ROM, did a Nandroid Backup through CWM.
Used the ROM for a few days, but when I saw that official update is ready for download for i9020A, did do a restore from the Nandroid backup I created.
Updated from 2.3.3 to 2.3.4, phone works fantastic, video chat also works great.
After update when I tried using any of the apps required SU permission, they didn't work. I tried installing a couple of .apk files, couldn't either install it or after installation it didn't work.
Thought let me try wiping my phone clean and start all over again, may be I will use a custom ROM again, downloaded ROM, went to ROM Manager to reboot into recovery, nothing happens.
Tried booting into Recovery option manually by pressing Volume Up and Power button, nothing happens but the Bot with an Arrow appears on screen.
So, I thought I will follow this procedure to reflash CWM to my phone and get it going. I was able to use the command FastBoot once, and suceeded pushing .img file to my phone but now whenever I try using the commands from my computer, this error message appears : "This application has failed to start becasue AdbWinApi.dll was not found. Re-installing the application may fix this problem."
Why this error message if I have the sdk on my computer already through which I was once able to push .img file without any troubles?
Can anyone tell me what would be a possible solution?
Also, how can I fix this problem and get ClockWorkMod Recovery installed on my NS again?
How can I get stock recovery image on my phone if I want start all over again from scratch?
Thx a million.
Edit ::: I found the answer as to how to how to install CWM again. Thx anyways.
Other question still remains a puzzle... why am I not able to install certain programs or if did manage to install, can't run them?
I ran your method and I think I'm stuck at some step...
My phone now default boots into CWM 3.0.2.4
Recovery boots to a newer recovery I flashed.
How do I get my phone to default boot into the OS again?
Edit: nevermind, just downloaded the full 2.3.4 rom, extracted and flashed the original boot.img.
dreamsforgotten said:
All the right drivers are in the sdk.
Click to expand...
Click to collapse
After installing the sdk and a platform, I have adb, but where is fastboot?
I was getting the same error as "Image cant be loaded". after hours of struggling I found that It's only because I was not in the same directory as the img file. silly eh?
hi,did you repaiar your phone,i have try everything but it just keep going in clockwork mode,if i than pres reboot now in clockworkmode it stays on google padlock
i realy need phone if you can help or someone else,than ....
just tried this method of window7 (thanks for the work) with cwm 3.0.2.4, but got the same result like the others in this thread: cant boot the android 2.3.4, the system is always booting into the cwm, no way out.
I don't think this tool works as it should.
:-(
EDIT:
I didn't realize that window7's tool would install the cwm into the boot-partition instead of the recovery-partition.
To get my boot partition back I downloaded the 2.3.4 firmware image from http://forum.xda-developers.com/showthread.php?t=1056062 and extracted the boot.img from the zip.
with "fastboot flash boot boot.img" I restored my orginal boot partition an can boot into android again.
(fastboot is part of the android sdk)
Related
Can someone please direct me to the a step by step guide on how to Root and put CM7 on the Nexus S i9020a variant? Most of the stickies are for the T-mobile version and Its getting to be a bit confusing on which guide to follow. Please help this noobie!!!
use gingerbreak then rom manager it's that simple
http://forum.xda-developers.com/showthread.php?t=1044765
Quick note once you install CM7 do not use the 2g/3g feature it will break your 3g
Break 3g? as in damage it permanently? Thanks for the link for gingerbreak so basically that will root my nexus s then I can install CM 7 with out any special instructions since it has different radio compared to the tmobile version?
i used gingerbreak then rom manager to install clockwork recovery and CM7. Do some reading the 3g bug for I9020A has been discussed a few times. Just stay away from the 2g/3g toggle and everything will be fine. I don't think it permanently breaks it just is a pain in the A to fix. I have a I9020A and this was the simplest way I've found.
don't we have to flash a clockwork compatible kernel first, before flashing cm7?
Also, doesn't clockwork rom manager fail on sns? I have cwr from the main stickies, but rom manager doesn't see it (it works), and can't download roms, unless cwr from rom manager, which I heard fails.
Sent from my Nexus S using XDA App
So I downloaded CM7 7.0.2 - and gapps - flashed in order (nandroid first) and voila! no hastle! This ROM is great!
No, those are the only steps i took
CM7 comes with its own AOSP kernel. Just flash the rom, you'll get the kernel bundled. (Of course you can always use a great kernel from the developers thread) don't forget to flash gapps.
Sent from my Nexus S using XDA Premium App
jruweaver said:
Quick note once you install CM7 do not use the 2g/3g feature it will break your 3g
Click to expand...
Click to collapse
He means don't use the 2g/3g toggle widget as that will cause some problems, it hasn't been fixed yet. If you do want to change it though, do it manually through the settings.
Sent from my Nexus S using XDA App
I tried using gingerbreak on my i9020a but it runs for longer than 15 mins so I guess it doesn't work. What are my other options for rooting?
edit: I guess it's because I installed 2.3.6.. is it possible to downgrade easily?
drleospaceman said:
I tried using gingerbreak on my i9020a but it runs for longer than 15 mins so I guess it doesn't work. What are my other options for rooting?
edit: I guess it's because I installed 2.3.6.. is it possible to downgrade?
Click to expand...
Click to collapse
Follow one of the root guides, all you really need to do is unlock the bootloader and install Clockwork Recovery.
Once that is done, download the zip for cm7 and use CWM to flash it.
Matridom said:
Follow one of the root guides, all you really need to do is unlock the bootloader and install Clockwork Recovery.
Once that is done, download the zip for cm7 and use CWM to flash it.
Click to expand...
Click to collapse
Thanks
Matridom said:
Follow one of the root guides, all you really need to do is unlock the bootloader and install Clockwork Recovery.
Once that is done, download the zip for cm7 and use CWM to flash it.
Click to expand...
Click to collapse
Exactly the steps I took. Took all of 10 minutes
Code:
fastboot oem unlock
fastboot flash recovery recovery.img
fastboot reboot recovery
Install .zip from SD
Select CM7
reboot system
Mr Kyle said:
Exactly the steps I took. Took all of 10 minutes
Code:
fastboot oem unlock
fastboot flash recovery recovery.img
fastboot reboot recovery
Install .zip from SD
Select CM7
reboot system
Click to expand...
Click to collapse
Agreed, but it's a matter of getting the correct CWM image for our phones. Also, for people who are setting up their phones for the first time, the drivers needed for fastboot need to be installed, fastboot/SDK needs to be downloaded etc...
Hence why i referenced the rooting guides.
Mr Kyle said:
Exactly the steps I took. Took all of 10 minutes
Code:
fastboot oem unlock
fastboot flash recovery recovery.img
fastboot reboot recovery
Install .zip from SD
Select CM7
reboot system
Click to expand...
Click to collapse
Which recovery img file should I use from here?
http://forum.xda-developers.com/showthread.php?t=988686&highlight=i9020a
Thanks
edit: nevermind, I guess the color names are just cosmetic?
drleospaceman said:
Which recovery img file should I use from here?
http://forum.xda-developers.com/showthread.php?t=988686&highlight=i9020a
Thanks
edit: nevermind, I guess the color names are just cosmetic?
Click to expand...
Click to collapse
Yep, it's just the color you want your recovery to be. I flashed the cyan a couple of days ago for somebody else and no issues.. typical clockwork recovery
So I flashed the recovery file, but when I boot into recovery now, there's just the triangle with the ! in it and nothing happens.. did I do something wrong?
edit: reflashed it and it works
drleospaceman said:
So I flashed the recovery file, but when I boot into recovery now, there's just the triangle with the ! in it and nothing happens.. did I do something wrong?
Click to expand...
Click to collapse
How did you flash it? That's the stock recovery.. should be 'fastboot flash recovery nameof.img' without quotes obviously.
drleospaceman said:
So I flashed the recovery file, but when I boot into recovery now, there's just the triangle with the ! in it and nothing happens.. did I do something wrong?
edit: reflashed it and it works
Click to expand...
Click to collapse
somebody after reboot no CWR on recovery use this solved your problem
clockworkmodrecovery rom manager find and install
open it and touch flash clockworkmod recovery(first item)
select reboot into recovery manual
mount and storage select
mount USB storage
unmount
++++ go back +++++
install from zip sdcard
find
'' super user.zip'' flash
reboot
find and isntall ''es file explorer'' select setting mark root explorer and mount file system after
select phone in file explorer find ''etc'' folder select and find ''install-recovery.sh'' file and rename file for example ''install-recovery.sheski'' and
open rom manager again touch flash clockworkmod recovery(first item)
check it...
please click thanks button
For those of you wondering why the S-OFF feature was worth your extra time to update, this is a prime example of why S-OFF kicks royal behind.
So here is the situation I was having. Friday morning, T-Mo showed me some love and sent me the Gingerbread update. I didn't have my morning coffee so I wasn't thinking strait and authorized the update. I forgot that it would probably interfere with good ol' ClockworkMod Recovery. Sure enough, it did. So, after the OTA failed due to the recovery, I haven't been able to get T-Mo to show me some OTA love again.
However, I had previously invoked the S-OFF feature when it was discovered how to.
After following the guide at http://forum.xda-developers.com/showthread.php?t=1202060 I found myself with a G2 using stock recovery and bone stock Gingerbread (S-OFF still invoked).
After some thought, I decided to do the following:
Flash ClockworkMod via the bootloader screen, and flash SU via the ClockworkMod screen.
Note: You can only do this if you have S-OFF! And since my guide writing skills are not so pristine, I'm assuming you have some sort of working adb/bootloader/recovery knowledge.
Save the attached files (PC10IMG.zip & su.zip) to your sdcard. Reboot into the bootloader either by using the adb command adb reboot bootloader or by powering off, and then holding Vol-Down+Power.
The bootloader will scan for PC10IMG.zip and then ask you if you want to flash the recovery. Yes! You do!
After this, reboot the phone. Reboot into recovery by using the adb command adb reboot recovery, or booting back into the bootloader and navigating to the Recovery console (if you didn't delete the PC10IMG.zip, bootloader will scan it, but don't let it update again, this is redundant).
Once you are in ClockworkMod, navigate to "install zip from sdcard", then to "choose zip from zip card". Select the su.zip file from the list, and authorize the recovery console to flash the zip. Reboot the phone.
Now, you will see the coveted SuperUser app in your drawer. I figured this was wayyyy to easy to have worked, so I tested some root dependent apps, they work flawlessly. I also used the adb command adb shell followed by su once in the shell. SuperUser requested my permission and after granting it, I am able to remove the bloatware that was replaced during the downgrade, also, rebooting the phone as normal and from a removed battery does not remove this root. So I'll say it's a permaroot.
I compiled the attached files specifically for this. The ClockworkMod Recovery version is 3.0.2.4, SuperUser version is 2.3.6.1.
Thanks!
It sounds like you started where I am: Clockwork Mod, S-OFF and stock Froyo 2.2.
Q. How did you follow the steps in the thread to get onto Gingerbread? Did you remove ClockworkMod? If yes, how did you revert to stock recovery? This is the step that I'm caught on, and can't find a thread regarding. Thanks!
Edit to add:
Did you unroot the phone using these steps?
If so, were you at all scared about the warning regarding PC10IMG.zip?
I ended up using the entire stock 2.2 PC10IMG which wiped clockwork off the phone to stock recovery. I didn't do anything to unroot, since the stock rom replaced recovery, system etc but left s-offf in tact.
ETA: I also didn't read either of those articles and wasn't aware of the bricking issue, I've done the phone flashing, modding and unbricking for about 2 years now and just used experience as a guide..
Sent from my T-Mobile G2 using Tapatalk
rdmerck said:
I ended up using the entire stock 2.2 PC10IMG which wiped clockwork off the phone to stock recovery. I didn't do anything to unroot, since the stock rom replaced recovery, system etc but left s-offf in tact.
ETA: I also didn't read either of those articles and wasn't aware of the bricking issue, I've done the phone flashing, modding and unbricking for about 2 years now and just used experience as a guide..
Sent from my T-Mobile G2 using Tapatalk
Click to expand...
Click to collapse
Okay, so just to verify, you flashed CWM recovery while running the GB update? When you adb shell you open a # prompt? I've been gfree s-off'd since I got my phone so even with the leak or otherwise I've been able to just reflash the stock 1.19/1.22OTA and reroot it but I didn't think to try flashing cwm while it's stock gb'd....so tempted.
I compiled the attached files specifically for this. The ClockworkMod Recovery version is 3.0.2.4, SuperUser version is 2.3.6.1.
Click to expand...
Click to collapse
So I sit down to write up a quick guide this morning and what do I find? Nicely done. Couple of points I wanted to add to why this works -
This method fixes the things that the OTA breaks for root: New stock hboot and stock recovery are flashed and on the rom side it wipes /system/xbin which breaks the su symlink.
Flashing the PC10IMG above fixes the recovery.
Flashing the superuser package reinstalls Superuser.apk, the su binary and fixes the symlink to xbin.
But, still not hboot-eng so your fastboot options are limited.
When I did this I had replaced the DZ engineering hboot.img in rmk's package with the G2 engineering hboot.img and edited android.txt for the new G2 build. This allows you to take care of both in once flash.
Hope this is useful to someone and thank you for saving me from writing a guide!
8/27/2011 Edit:
Realized ro.secure=0 so I repacked the stock boot.img from the 2.3.4 PC10IMG.zip with the below changes to default.prop. This allows use of the "adb remount" so files can be pushed to system folders without needing to go into terminal and mounting rw.
Code:
#
# ADDITIONAL_DEFAULT_PROPERTIES
#
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
persist.service.adb.enable=1
Modified installation instructions for full root:
Flash the PC10IMG.zip with the G2 engineering bootloader in this post
Flash the superuser update.zip in the OP
Extract the attached boot.img to the platform-tools directory
Remove the PC10IMG from your sdcard and reboot into bootloader
Select fastboot
Enter the following command in terminal or cmd:
Code:
fastboot flash boot boot.img
fastboot reboot
Kind Regards,
Kevin
zkid2010 said:
Okay, so just to verify, you flashed CWM recovery while running the GB update?
Click to expand...
Click to collapse
Yes. Just flash the PC10IMG and you have clockwork recovery again. However, you absolutely need SuperCID set while in froyo or this does not work.
Kind Regards,
Kevin
Confirm Here that it works...
Root and S-OFF
Gingerbread OTA 2.3.4
Thanks Guys for your help!
Flawless!
This worked flawlessly!!
I admire you so much for figuring this out!!
Thank you so much!
HELP!
sort of noobie here..
so i just updated my g2 to 2.3.4 following http://forum.xda-developers.com/showthread.php?t=1202060
and now i want to perm root my phone and overclock it but im having troubles.
1. how do i get clockworkmod installed? i know you can install this from rom manager but it requires root. right?
cause you said.. "Just flash the PC10IMG and you have clockwork recovery again"..
i tried flashing the PC10IMG.zip but got an error and says aborted.
any help please?
thanks in advance
If you are already on 2.3.4 and had not previously rooted then this thread will be of no use to you since your G2 does not have SuperCID (again, read the wiki.)
You will need to downgrade back to froyo (other threads on this and links in the wiki.) Once rooted, then install one of the rooted stock roms in this forum or follow this guide to reinstall the recovery and superuser (hboot optional.)
Hope that gets you going in the right direction.
Kind Regards,
Kevin
Sent from my T-Mobile G2 using Tapatalk
G2 Problems??
Hi, how can i get S-OFF on my g2 since it seems i can not generate a beta key from the revolutionary website cause g2 it's not in the drop down list, don't know what to pick and i want to be able to have my g2 rooted with android 2.3.. can somebody help me please?
Thanks.
Revolutionary is not available for the Desire Z/G2. Have you flashed the leaked 2.3.3 and trying to root? PM please.
Hey I notice most of the people in this thread are Americans - would this method work for the DZ or is it just for the G2?
Sorry if this is a noobish question.
Not a noob question, this one is new for me too. Fundementals are the same, process would be the same. I don't know if there is any issue using a PC10IMG with the info for a G2 (contained in the file called android-info) so may need rebuild one modified with DZ information.
Proceed with caution and do not do anything you are not 100% sure about.
Sent from my T-Mobile G2 using Tapatalk
I'll hold off on confirming the update in that case! I'm still on stock firmware, didn't apply the update from March either. When I've read enough to be confident on how to perma-root the current firmware I might risk following the method in this thread. Then I'll post back to let you know if it works on the DZ.
My DZ came with 1.34 firmware, I rooted it on this firmware. I accidentally upgraded it and am now on the OTA gingerbread ROM. Is this method suitable in this situation or do I require to flash a rooted stock ROM for this method to work.
Accidentally manually applied the OTA? Should work, you have a G2 now!
Sent from my HTC ThunderBolt using Tapatalk
Is there any newbie guide for how to do this? From getting Clockwork on there to getting this rooted 2.3.4 on. I have a rooted 2.2 with S-OFF right now, stock. Just don't really know what to do from this point on.
How to is in the OTA thread (which needs a helping of Iron Fist.) Come back here when ready to re-root.
Sent from my T-Mobile G2 using Tapatalk
rdmerck said:
Save the attached files (PC10IMG.zip & su.zip) to your sdcard. Reboot into the bootloader either by using the adb command adb reboot bootloader or by powering off, and then holding Vol-Down+Power.
The bootloader will scan for PC10IMG.zip and then ask you if you want to flash the recovery. Yes! You do!
After this, reboot the phone. Reboot into recovery by using the adb command adb reboot recovery, or booting back into the bootloader and navigating to the Recovery console (if you didn't delete the PC10IMG.zip, bootloader will scan it, but don't let it update again, this is redundant).
Once you are in ClockworkMod, navigate to "install zip from sdcard", then to "choose zip from zip card". Select the su.zip file from the list, and authorize the recovery console to flash the zip. Reboot the phone.
Now, you will see the coveted SuperUser app in your drawer. I figured this was wayyyy to easy to have worked, so I tested some root dependent apps, they work flawlessly. I also used the adb command adb shell followed by su once in the shell. SuperUser requested my permission and after granting it, I am able to remove the bloatware that was replaced during the downgrade, also, rebooting the phone as normal and from a removed battery does not remove this root. So I'll say it's a permaroot.
I compiled the attached files specifically for this. The ClockworkMod Recovery version is 3.0.2.4, SuperUser version is 2.3.6.1.
Click to expand...
Click to collapse
**** Im at the step above finally lol this is my first root and I had to downgrade, man Ive been doing this for hours and hours. My brain is fried LMAO **** I currently have my G2 with S-OFF and a stock Gingerbread 2.3.4. I have the PC10IMG.zip and su.zip in the root or directly in my sdcard. In no folders im trying to say... I reboot into the bootloader. The bootloader will scan for PC10IMG.zip and then ask you if you want to flash the recovery. Yes! You do!
Well when I do it it doesnt ask me to "flash the recovery" it says "Parsing....(SD ZIP)
(1) RECOVERY
Do you want to start the update?
<VOL UP> YES
<VOL DOWN> NO
I accept the update by pressing vol. up. It comes back and says Update comeplete... - OK
Press Power to Reboot
I reboot and get into clockworkmod it says click "install zip from sdcard" I click it and a little hat appears but it doesnt do anything from there. I let it set a couple of min but still nothing... I have to pull battery out to get it to reboot. help pls....
Sean...
Didn't see this in General so thought it would be worth adding, especially since there have been many threads lately with new users wanting to root their phone and then getting scared of the guides.
Now there is also the option to go the official way to unlock the bootloader.
http://htcdev.com/bootloader/
noob here with a question... rooting is the same as unlocked bootloader??
coldsun15 said:
noob here with a question... rooting is the same as unlocked bootloader??
Click to expand...
Click to collapse
Not quite. It can probably explained more accurately but the gist of it is this:
An unlocked bootloader is what allows you to flash custom roms to your phone.
Root access simply grants you the rights to mess with your phones rom whichever way you want.
thomas_wlc said:
Not quite. It can probably explained more accurately but the gist of it is this:
An unlocked bootloader is what allows you to flash custom roms to your phone.
Root access simply grants you the rights to mess with your phones rom whichever way you want.
Click to expand...
Click to collapse
so, basically whats this means is, now i dont need to root and s-off and stuff to be able to put CM7 (for example)?
coldsun15 said:
so, basically whats this means is, now i dont need to root and s-off and stuff to be able to put CM7 (for example)?
Click to expand...
Click to collapse
I thinks that's pretty much it, once you have unlocked your bootloader you'll be able to flash any custom rom you like. Though it'll probably a bit tricky on the first go since you don't have a custom recovery yet, so I believe you'd have to flash some pc10img.
Still it's commonly to believed to be the better choice to stick with the more exhausting solutions posted around here, since HTC will register your phone if you use their tool. At least for the time being they claim that by using their way, your warranty will be void.
I've unlocked my desire z through the htcdev.com website.
Bootloader is unlocked, S-on..
But I can't get a rom installed, it gave me an error while trying to update from the recovery mode (apply update zip) using a stock rom with root.
Akward..
So now I've unlocked my bootloader, but still can't change my rom..
Anyone know how to do it after you've unlocked the bootloader?
flash custom recovery first, from there flash the rom
if you're s-on, bootloader is still locked....
artov said:
flash custom recovery first, from there flash the rom
Click to expand...
Click to collapse
I'm working on it
Gaining temp root using this guide worked.
http://forum.xda-developers.com/showthread.php?t=1178912
But when I press start clockwordmod, it says that my phone is not rooted..
While I press "flashcockwork" clockword mod recovery, I get an error.
än error occurred while attempting to run privileged commands!
I'm doing something wrong..
pretty annoying
I get unlock my bootloader today, and YES there is S-ON, but on the top is written in hboot menu big letters UNLOCKED (How you thinks, htcdev joke?).
I've installed clockworkmod using fastboot:
Code:
fastboot flash recovery clockwork_mod_for_vision.img
Then put off battery and turn on phone with volume down + power, I pressed 'recovery' menu option. Clockworkmod runs correctly. Then tried last stable CyanogenMod 7.1.0, flash was done without errors, I wiped out what's need (cache, data). Next I tried run phone, but freezes at splash (green htc letters on white background).
I tried also miui mod, but Ive got only MIUI splash screen nothing else.
Then I restored my htc from backup (done before flashing using clockworkmod) and Im still on the stock htc android 2.3.3.
Regards,
Mariusz
p.s Sorry for my poor english.
how can I install CM7 or other roms after unlocking the bootloader
Hi,
I also unlocked using the official method of unlocking the bootloader. How can I get root and install CM7 now? Even to install clockwordmod its asking me root the phone.
Can someone help me out here?
Thanks...
RSK
rskainth82 said:
Hi,
I also unlocked using the official method of unlocking the bootloader. How can I get root and install CM7 now? Even to install clockwordmod its asking me root the phone.
Can someone help me out here?
Thanks...
RSK
Click to expand...
Click to collapse
1. boot to fastboot mode, flash a custom recovery (recommand ClockWorkMod), power down the phone.
2. put your downloaded update_cm7.xxx.zip into sdcard, boot phone into recovery
3. choose in the recovery, first "wipe data", then "install update from sdcard", choose the zip file you just put in.
4. choose "reboot system"
that's all to go.
pentie said:
1. boot to fastboot mode, flash a custom recovery (recommand ClockWorkMod), power down the phone.
2. put your downloaded update_cm7.xxx.zip into sdcard, boot phone into recovery
3. choose in the recovery, first "wipe data", then "install update from sdcard", choose the zip file you just put in.
4. choose "reboot system"
that's all to go.
Click to expand...
Click to collapse
I did it, but CM7 doesnt boot.
rskainth82 said:
Hi,
I also unlocked using the official method of unlocking the bootloader. How can I get root and install CM7 now? Even to install clockwordmod its asking me root the phone.
Can someone help me out here?
Thanks...
RSK
Click to expand...
Click to collapse
flak999 said:
I did it, but CM7 doesnt boot.
Click to expand...
Click to collapse
Booting problem is mostly kernel related, do you have logcat output? (run "adb logcat" and boot the phone)
I encountered with the situation (w. another phone) that the recovery can't flush the boot partition during the recovery installation, I have to extract the boot.img file from the zip and flash it manually in the fastboot mode (fastboot flash boot boot.img)
EDIT:
That was a EVO3D with UNLOCKED HBOOT, I believe you're having the same situation, try my method or may others make out a better perfect solution ? (not my own phone, I just helped with its owner, no time to dig the details)
pentie said:
I encountered with the situation (w. another phone) that the recovery can't flush the boot partition during the recovery installation, I have to extract the boot.img file from the zip and flash it manually in the fastboot mode (fastboot flash boot boot.img)
EDIT:
That was a EVO3D with UNLOCKED HBOOT, I believe you're having the same situation, try my method or may others make out a better perfect solution ? (not my own phone, I just helped with its owner, no time to dig the details)
Click to expand...
Click to collapse
Thanks men thats worked for me. First flash the boot.img from CM7.0.1 then run recovery and run update_cm7.0.1.zip. After reboot everything run corectly.
Once more thanks!
flak999 said:
Thanks men thats worked for me. First flash the boot.img from CM7.0.1 then run recovery and run update_cm7.0.1.zip. After reboot everything run corectly.
Once more thanks!
Click to expand...
Click to collapse
now I confirmed the UNBLOCKED HBOOT somehow blocks the CWM to flash boot.img
My Phone have a S-OFF HBOOT and i was considering flash it to the UNLOCK the last night, now it seems not worth the try ~
pentie said:
I encountered with the situation (w. another phone) that the recovery can't flush the boot partition during the recovery installation, I have to extract the boot.img file from the zip and flash it manually in the fastboot mode (fastboot flash boot boot.img)
Click to expand...
Click to collapse
My friend has an officially unlocked Desire Z as well and I gave him these instructions to try it out, he has the same boot problem (stuck at splash screen). Maybe this information should either be stickied or added to a faq until there is a real solution to the problem (unlike this workaround), updated cwm or something like that.
Anyway thanks for sharing this information.
HTC bootloader unlock tool is quite restrictive. It still leaves you S-ON, so you won't be able to flash a new hboot or radios.
I recommend avoiding it and using the current well-proven methods from the XDA Wiki.
Sent from my Desire Z running CM7.
Its working now...
Steps I followed:
1. flash recovery using fastboot
2. Do a nandroid backup using recovery
3. flash boot.img using fastboot
4. reboot into recovery
5. wipe data/cache
5. install update for CM7, and gapps
Also make sure before doing any of these steps you have copied CM7 and gapps update onto sdcard.
Thanks everyone for helping out.
I am experimenting with this myself and I don't seem to be having the same issues flashing a boot.img from an update.zip in ClockworkMod recovery with the official HTC unlocked bootloader that others are having. Maybe it is the version of the recovery that is the issue? Which version is everyone trying to use? I am using the 3.xxxx version that is linked from the wiki. I have had other problems with the 5.xxx version and tend to stick with the older version for that reason anyways.
Hi, a bit of noob but i did googled alot
My plan was:
Unlock and root with nexus 4 toolkit.
Do nandroid backup
Flash PA rom.
step 1 went okay,
afterwards i tried to go to recovery mode inorder to backup but i got the lying android with the red warning sign.
I did backup using Rom Manager and nexus 4 toolkit but I'm worried I can't get to recovery mode if something goes wrong.
How shall I proceed before flashing the rom?
The robot lying on it's back is the stock recovery. You need to flash CWM/TWRP before you can do a Nandroid
itayze said:
Hi, a bit of noob but i did googled alot
My plan was:
Unlock and root with nexus 4 toolkit.
Do nandroid backup
Flash PA rom.
step 1 went okay,
afterwards i tried to go to recovery mode inorder to backup but i got the lying android with the red warning sign.
I did backup using Rom Manager and nexus 4 toolkit but I'm worried I can't get to recovery mode if something goes wrong.
How shall I proceed before flashing the rom?
Click to expand...
Click to collapse
Do yourself a favour and learn how to use ADB instead of toolkits that do more harm than good if used by inexperienced users and you`ll learn to do it the right way.
Look here http://forum.xda-developers.com/showthread.php?t=1474956 for how to.
Youtube tutorial link http://www.youtube.com/watch?v=ZY4KSrgi-rE.
itayze said:
Hi, a bit of noob but i did googled alot
My plan was:
Unlock and root with nexus 4 toolkit.
Do nandroid backup
Flash PA rom.
step 1 went okay,
afterwards i tried to go to recovery mode inorder to backup but i got the lying android with the red warning sign.
I did backup using Rom Manager and nexus 4 toolkit but I'm worried I can't get to recovery mode if something goes wrong.
How shall I proceed before flashing the rom?
Click to expand...
Click to collapse
If you have Rom Manager Installed and are rooted you should be able to install CWM thru it.
don't have flash recovery on rom manager
I don't have the the "Flash CWM" recovery option on rom manager,
I've attached a screen of what I do have,
I did explore the Recovery Setup but wasn't able to do anything usefull.
Any advice?
itayze said:
I don't have the the "Flash CWM" recovery option on rom manager,
I've attached a screen of what I do have,
I did explore the Recovery Setup but wasn't able to do anything usefull.
Any advice?
Click to expand...
Click to collapse
according to ROM Manager you already have CWM installed and its up to date. Have you tried booting into recovery using ROM Manager?
When I press reboot to recovery directly from rom manager it works...
I'm just affraid that in case that I brick or mess up something I won't be able to get to stock recovery mode.
volume down + power button = bootloader (android on his back) also called fastboot mode
use volume buttons to scroll to recovery then press power button to select it
you should then be in CWM recovery if its installed correctly.
If you are using a custom recovery your stock recovery is gone. You would have to use fastboot to flash the stock recovery image back onto the phone. Its rather simple to do as is flashing the stock image file back onto the phone.
that is why I started this thread.
After I Unlocked and rooted I wasn't able to fastboot and go to recovery mode, it showed my the android on his back.
I've tried it again now and it still doesn't work.
but when I boot directly from rom manager it works...
Edit: I posted before you edited your comment.
even though I don't know adb, should I learn and follow this guide?
http://www.androidauthority.com/nexus-4-clockworkmod-recovery-134114
itayze said:
that is why I started this thread.
After I Unlocked and rooted I wasn't able to fastboot and go to recovery mode, it showed my the android on his back.
I've tried it again now and it still doesn't work.
but when I boot directly from rom manager it works...
Click to expand...
Click to collapse
There is a bug that restores the stock recovery after a reboot and there should be an option in the root toolkit to fix it. Not saying this is what happened but it may have. The stock recovery is stored in system memory somewhere and the bug fix just removes it so it won't restore itself after reboot.
Follow efrants guide for ADB and fastboot
http://forum.xda-developers.com/showthread.php?t=2010312
kzoodroid said:
There is a bug that restores the stock recovery after a reboot and there should be an option in the root toolkit to fix it. Not saying this is what happened but it may have. The stock recovery is stored in system memory somewhere and the bug fix just removes it so it won't restore itself after reboot.
Follow efrants guide for ADB and fastboot
http://forum.xda-developers.com/showthread.php?t=2010312
Click to expand...
Click to collapse
Its not a bug. Its a script. Intended feature.
Sent from my Nexus 4 using xda premium
El Daddy said:
Its not a bug. Its a script. Intended feature.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
I call it a bug because its an annoying feature. There are a number of threads no how to remove it but using a toolkit to do it is just as easy.
thank you,
but after I've read what you wrote about the bug I open the nexus root tool kit and then I realized what I should have done.
I pressed Custom recovery checkbox and rooted again.
now it works !
itayze said:
thank you,
but after I've read what you wrote about the bug I open the nexus root tool kit and then I realized what I should have done.
I pressed Custom recovery checkbox and rooted again.
now it works !
Click to expand...
Click to collapse
Glad you got it working. I would still learn adb and fastboot. Though I too use the tool kit every now and then out of convenience.
Hi,
Last night i was playing with my N4 (with some root applications) and an app asked for a reboot. I just pressed yes so that the phone will reboot (I have done this earlier without any issues). Suddenly the device doesn't boot up. My N4 is stuck at a black screen. While trying to boot up, the Google logo appears and then a black screen. It doesn't advance to the 'X' logo. I'm running on stock, rooted phone (used N4 toolkit by Wugfresh to root).
I'm able to boot into recovery although. I tried all the possible means, wiped cache, dalvik cache, did a factory reset, backed up the system and tried to restore the same. Nothing happened.
Then i tried the "Back to Stock" option in the N4 toolkit and chose the option "Soft-brick/Bootloop" to recover my N4. These are what happened:
Downloaded the 4.2.2 image from Google servers and tried to flash in the device with prior instruction from the toolkit. Everything went fine until the flashing process. In the last step the CMD window opens up saying it is unrooting and flashing stock and immediately it'll bring up a complete message saying the flashing is complete and to wait until the device boots up. But nothing happens again.
I tried the automatic flashing and on the downloading window it saying download failed and hash checks failed meaning its not downloading.
I searched all the possible threads in a day to find a similar problem but in vain. I'm not a noob but i'm too lazy . But i would do anything to bring my N4 back to life. Anyone please show me a direction.
In short:
Status: Soft-Bricked (guess so), black screen after Google logo
Version: Stock 4.2.2 (rooted+busybox+supersu+twrp)
Able to boot to recovering: Yes, bootable to recovery and bootloader.
Tried Nexus toolkit recovery: Yes but in vain.
Gave up: No and never, I'm searching and searching for answers and I'm worried if I'll end up in a hard brick. :crying:
Guys, please help.
Thank You!
Aghil
I'm just taking a wild guess here - I'm not responsible if anything bad happens, and you might want to wait to someone else seconds my suggestion in any case (although I can't imagine things getting worse as long as you flash N4 stuff). But have you tried flashing a new boot.img/reset kernel from recovery or via fastboot/toolkit?
ameinild said:
I'm just taking a wild guess here - I'm not responsible if anything bad happens, and you might want to wait to someone else seconds my suggestion in any case (although I can't imagine things getting worse as long as you flash N4 stuff). But have you tried flashing a new boot.img/reset kernel from recovery or via fastboot/toolkit?
Click to expand...
Click to collapse
Err...nope I haven't tried any and will wait until someone seconds you. Meanwhile I have wiped off the ROM through the option in recovery. Still will I be able to do what you said? Also if could direct me to a "how-to" thread would be great. Just that I don't wanna mess up again.
Also, is there a way to transfer a ROM to N4 through fastboot? So that I can install the ROM through TWRP.
aghilvr said:
Err...nope I haven't tried any and will wait until someone seconds you. Meanwhile I have wiped off the ROM through the option in recovery. Still will I be able to do what you said? Also if could direct me to a "how-to" thread would be great. Just that I don't wanna mess up again.
Click to expand...
Click to collapse
No, my suggestion would require that the ROM is still on the phone, so you should restore your ROM prior to my suggestion. And I'm by no means an expert (therefore the disclaimer), but I *think* that since it's a bootup problem, it could be solved by flashing a new boot.img (which is essentially flashing a new kernel to the system).
But yeah, let's see if others think this might help, haven't researched it, is at work right now. Just throwing in a suggestion, that's all...
Also, is there a way to transfer a ROM to N4 through fastboot? So that I can install the ROM through TWRP.
Click to expand...
Click to collapse
I *think* (again, I'm totally not sure about this, as I haven't tried it) that you can sideload a ROM via zip file from recovery, but since I haven't tried it I'm not sure - can anybody confirm???
EDIT: Chromium's suggestion is better, by pushing the ROM.zip to the device and flashing from recovery (check md5 first, just in case).
aghilvr said:
Also, is there a way to transfer a ROM to N4 through fastboot? So that I can install the ROM through TWRP.
Click to expand...
Click to collapse
Yes there is. Your nexus is not bricked and this is why you shouldnt use toolkits to do things. This is honestly an extremely easy and simple fix. Use adb to push a rom onto the n4.
Code:
adb push \path\to\rom.zip /sdcard
Boot into recovery, do a full wipe, and flash the rom.
You said you downloaded the Google images.
Just boot your phone into the bootloader and run the flashall.bat that is in the Google image folder.
Note this will probably fully wipe you're phone in the process
Sent from my Nexus 4 using xda app-developers app
try this it may help u this toolkit is damn easy to use :
http://forum.xda-developers.com/showthread.php?t=1995688
Okay, thanks guys. I'm on it. Will let you know when I'm done.
That same thing happened to me once. I had to extract the google file and look for the 4 img files(bootloader, system, userdata, recovery) and flash them with toolkit manually and it fixed it, but it erased everything on my sd
I tried to load the file "occam-jdq39-factory-345dc199.tar" into my phone using the ADB sideload feature in the toolkit. I don't have the SDK installed hence I depended the tool again. But now the tool only loads .zip file and not .tar as the one that i downloaded. Am I doing it right?
aghilvr said:
I tried to load the file "occam-jdq39-factory-345dc199.tar" into my phone using the ADB sideload feature in the toolkit. I don't have the SDK installed hence I depended the tool again. But now the tool only loads .zip file and not .tar as the one that i downloaded. Am I doing it right?
Click to expand...
Click to collapse
K if you have a custom recovery installed, there isnt much you need to do to fix the issue.
First setup adb/fastboot by reading this
Then boot the phone into recovery, and plug it into the computer. Open a new command prompt window and use adb like this:
Code:
adb push \path\to\rom.zip /sdcard
Then you can unplug the phone. From recovery go to the install menu, find the rom that you just pushed, and flash it.
chromium96 said:
K if you have a custom recovery installed, there isnt much you need to do to fix the issue.
First setup adb/fastboot by reading this
Then boot the phone into recovery, and plug it into the computer. Open a new command prompt window and use adb like this:
Code:
adb push \path\to\rom.zip /sdcard
Then you can unplug the phone. From recovery go to the install menu, find the rom that you just pushed, and flash it.
Click to expand...
Click to collapse
Okay, installing the SDK. And the command saying "rom.zip", the file that I have is like "rom.tar". Does it matter? I downloaded the rom from here https://developers.google.com/android/nexus/images
aghilvr said:
Okay, installing the SDK. And the command saying "rom.zip", the file that I have is like "rom.tar". Does it matter? I downloaded the rom from here https://developers.google.com/android/nexus/images
Click to expand...
Click to collapse
No the tar wont work through recovery. You should download a rom from here or here.
If you want to flash the stock rom through recovery you can download it here.
chromium96 said:
No the tar wont work through recovery. You should download a rom from here or here.
If you want to flash the stock rom through recovery you can download it here.
Click to expand...
Click to collapse
Oh that's why it didn't work all the time
Thanks chromium :fingers-crossed:
Hey thanks guys, my device is back to normal. Chromium a special thanks for you for helping me out. See you guys with my next problem/queris!