Related
Hi guys,
I've been experiencing this very consistently for the last couple of days now... every time I plug into USB - when I mount, the phone reboots... it's very quick, but has anyone else been experiencing this?
Thanks!
Hi keisuke_z,
which phone (X10i or X10a) and which Firmware do you make use of?
I had that Issue on my X10i UK Firmware R1FA016 too. Now, on Nordic R1FB001 everything is fine.
I'm not sure, if it was an Firmware or settings Issue.
On R1FA016 I couldn't determine any settings that could have caused that problem and resetting the device didn't help neither.
I am now getting this issue. Whenever I go to mount my phone, it crashes and then reboots. However it is always mounted when I plug it in. This leads me to believe it is somehow stuck in a mounted mode.
Anyone know a how I can see the logs for what the hell is going on?
EDIT: By the way my phone is X10a (R1FA014)
Same question here
Same here, I never bothered troubleshooting it as the reboot is fast and all is good again post reboot but ya, would be nice to find a fix. I have also noticed that the icons that show up in the notification bar are the explanation mark icons and not the standard usb icons.
element27 said:
Same here, I never bothered troubleshooting it as the reboot is fast and all is good again post reboot but ya, would be nice to find a fix. I have also noticed that the icons that show up in the notification bar are the explanation mark icons and not the standard usb icons.
Click to expand...
Click to collapse
Exact same problem bro...
j3yps said:
Exact same problem bro...
Click to expand...
Click to collapse
Happens for me too - found out that's it's an application(s), as I re-flashed the phone, and the problem didn't occur until I batch-installed some applications.
ToastyJustice said:
I am now getting this issue. Whenever I go to mount my phone, it crashes and then reboots. However it is always mounted when I plug it in. This leads me to believe it is somehow stuck in a mounted mode.
Anyone know a how I can see the logs for what the hell is going on?
EDIT: By the way my phone is X10a (R1FA014)
Click to expand...
Click to collapse
I can even copy files on my PC, and access files on the phone SD card at the same time - how is that possible?
HunteronX said:
I can even copy files on my PC, and access files on the phone SD card at the same time - how is that possible?
Click to expand...
Click to collapse
Me too!! Isn't this a SE bug?
Well, I reset my phone to factory state and it seems to have gone away. It bugged me just that much while developing. However, I seem to find that it will still disconnect if the cable is jiggled a bit in there. Perhaps something is loose on mine too. If it gets bad I may have to send er in or get it replaced.
Hi Guys,
This problem has just started happening with my x10a. I'm hoping that the only solution isn't to wipe the phone...
The only thing I can think of that might be causing it is a particular app that is using the SD card?
Maybe the R2BA020 firmware update will help things out. As soon as I get it I'll let y'all know!
Update: I've upgraded to R2BA020 and the problem has not happened again yet.
Hello Everyone,
I have noticed that the phone reboots everytime Spotify or any other media player is active and accessing files on the SD card.
Cheers
Marcus
Same here, and i have found that with one more reboot the triangle icon goes back to the normal usb one again. As Thurban says above, maybe something is running which is accessing the sd card at the point when we attempt to mount it?
One step that might help - perhaps if we were all to use ATK to kill everything immediately prior to whenever we plug into usb, and report back here if the issue still raises its head? That sound like a plan?
updating the phone would help resolve the issue..might be some application on the sd card thats causing this..so, you can also try formatting the sd card..
Everytime I connect my phone via USB cable to my PC it mounts the SD card in USB Storage mode.
Its not a deal breaker but definitely can be an inconvenience when trying to use the phone while charging on a PC (which is how I use my phone at work).
Anyone else run into and find a fix for this?
I kinda remember seeing someone mention a weird solution to a similar problem (maybe regarding PC charging?) that entailed changing the screen timeout.
Phone Info:
Droid 2
ROM: Fission 1.1 (installed last night over a freshly SBF-ed phone)
I see at least one other person is experiencing this:
http://forum.xda-developers.com/showpost.php?p=8747858&postcount=56
Tried swapping out SD card for a freshly formatted one and still seeing the same issue. So I'm going to rule out the SD card being at fault.
aplus01 said:
Everytime I connect my phone via USB cable to my PC it mounts the SD card in USB Storage mode.
Its not a deal breaker but definitely can be an inconvenience when trying to use the phone while charging on a PC (which is how I use my phone at work).
Anyone else run into and find a fix for this?
I kinda remember seeing someone mention a weird solution to a similar problem (maybe regarding PC charging?) that entailed changing the screen timeout.
Phone Info:
Droid 2
ROM: Fission 1.1 (installed last night over a freshly SBF-ed phone)
I see at least one other person is experiencing this:
http://forum.xda-developers.com/showpost.php?p=8747858&postcount=56
Tried swapping out SD card for a freshly formatted one and still seeing the same issue. So I'm going to rule out the SD card being at fault.
Click to expand...
Click to collapse
AngDroid, part of the development team (Team DeFuse), has asked that bugs in regards to the fission rom be posted at Droid Life. It is hard for the team to manage multiple forums. Please make a post here :http://forum.droid-life.com/viewforum.php?f=61&sid=799e04fe62c2af5a7682b052087fe5aa and you will have a greater chance at getting a resolution.
I had this problem this weekend, but I'm running the stock ROM.
Some googling didn't turn up much, other than that certain programs would cause this, none of which I had. If i had the original link I'd post it. I think i read a lot about it on the Incredible forums here.. maybe?
Anyway, the only thing I had changed recently was installing Winamp.
It turned out that it was indeed Winamp. Uninstalled it and all works fine now.
Grrr! Wish I had checked this sooner. I rolled back to a nandroid backup. I was getting so fed up with it not working correctly. Glad to know it wasn't the Fission ROM. Though I kinda didn't think it was since I was having that issue even before going from the beta to 1.1.
Oh well, guess I'll try it again later. Tired of going through settings for apps. For now.
Thanks for the response, Lithoss.
Wonder if the winamp team knows their app prevents charging the Droid 2 via PC? It's a great app otherwise.
theecho said:
AngDroid, part of the development team (Team DeFuse), has asked that bugs in regards to the fission rom be posted at Droid Life. It is hard for the team to manage multiple forums. Please make a post here :http://forum.droid-life.com/viewforum.php?f=61&sid=799e04fe62c2af5a7682b052087fe5aa and you will have a greater chance at getting a resolution.
Click to expand...
Click to collapse
Thanks for the heads up. Didn't know the official Fission rom forum was on droid-life. Will have to bookmark that.
aplus01 said:
Grrr! Wish I had checked this sooner. I rolled back to a nandroid backup. I was getting so fed up with it not working correctly. Glad to know it wasn't the Fission ROM. Though I kinda didn't think it was since I was having that issue even before going from the beta to 1.1.
Oh well, guess I'll try it again later. Tired of going through settings for apps. For now.
Thanks for the response, Lithoss.
Wonder if the winamp team knows their app prevents charging the Droid 2 via PC? It's a great app otherwise.
Click to expand...
Click to collapse
No problem.
I dont think it prevents charging.... it just mounts it too when it shouldn't.
I emailed them about it through the link in the market.. so if they read their email they should know
You're right. It does charge properly. It doesn't allow access to SD card resources though. Which means no podcasts while hooked up via USB. Deal breaker!
Hope they get it figured out soon. That was a pretty sweet interface. I liked it better than cubed (^3).
Lithoss said:
No problem.
I dont think it prevents charging.... it just mounts it too when it shouldn't.
I emailed them about it through the link in the market.. so if they read their email they should know
Click to expand...
Click to collapse
This is toggleable behavior. Check the settings in winamp and you will see something to the effect of automatically mount SD card when connected. If you uncheck that, it shouldn't do it...
@natez0r - Thanks for the explanation. Guess this time it really is a feature and not a bug!
Guess I'll give winamp another shot since that "feature" can be turned off.
natez0r said:
This is toggleable behavior. Check the settings in winamp and you will see something to the effect of automatically mount SD card when connected. If you uncheck that, it shouldn't do it...
Click to expand...
Click to collapse
What is the point of this option? seems pretty useless to me...
Please put [SOLVED] in your thread title. Thanks
Roger that!
Can I close this?
Lithoss said:
What is the point of this option? seems pretty useless to me...
Click to expand...
Click to collapse
If I were to guess, it would be for making it easier to sync with winamp when you plug the phone into your computer. DoubleTwist also has this option, but i feel like it is more of a nuisance than anything.
@theimpaler747 - Yes, my question is answered.
aplus01 said:
@theimpaler747 - Yes, my question is answered.
Click to expand...
Click to collapse
Cool, I'll close it
Hi Guys,
I used the new Nexus 4 Toolkit to unlock the bootloader.
As I unfortunately dont have 10 Posts, I cant ask in this thread, so I hope it's ok to ask here.
I installed the drivers with USB-Debugging (as before for my galaxy nexus) and unlocked the bootloader.
So far everything went normal and good!
Then I wanted to root the system. It was said that I've to enable USB-Debugging again and the system will reboot.
But then :
I tap on "Enable USB-Debugging" and I'm asked If im sure. After this, nothing happens. Usually I see a information-icon, that usb-debugging is enabled in the taskbar.
This icon is now missing. And im completly not able to connect to phone via PC and use ADB.
Im slightly desperated, as anything I could do requires ADB/USB-Debugging.
Can you guys help me?
Thanks in advance.
Does your phone show up as MTP storage OK?
I remember my One X decided to cease all USB activity except charging once, a reboot sorted it.
The USB debugging icon is a little jelly bean as per the attached screenshot.
thanks for your reply.
I dont remember If it was shown as MPT-Storage - will check this immediately after work
THe Jelly-Bean-Icon showed up before, when used the toolkit to unlock the bootloader.
I also rebooted the phone several times
Ok, now everything seems to be identified correctly, again. Very strange.
Maybe the PC needed to be restarted.
Sorry for this post. It can be closed.
Thank you!
Were you able to resolve the problem?
I actually have the same problem also my Nexus 4 is getting very hot and the battery is drain within 4 hours from 100% to ~10% (about 400-800mA consumption).
All stock - I've already contacted the google support but now are holidays.
ev!denz said:
Were you able to resolve the problem?
I actually have the same problem also my Nexus 4 is getting very hot and the battery is drain within 4 hours from 100% to ~10% (about 400-800mA consumption).
All stock - I've already contacted the google support but now are holidays.
Click to expand...
Click to collapse
I've got the same problem, except my device is not loading until 100%. It gets really hot while not doing anything and it's empty in about 3 hours.
I figured out that the Nexus is only charged via "USB" although it's plugged in the charger.
Now my device is charging up until 100% but it still gets hot, is empty in about 5 hours and if I connect it in fastboot mode my laptop says that the drivers are not installed properly even though I installed the naked drivers. Re-installing the drivers does not work either, it says that my laptop already had the right drivers installed. And when I connect my device when it's booted it is not recognized at all and does not show up in the device manager. I tried three other cables... Sounds like an USB brick, right?
Ultraschorsch said:
Sounds like an USB brick, right?
Click to expand...
Click to collapse
That's what I think, too.
ev!denz said:
That's what I think, too.
Click to expand...
Click to collapse
Having the same trouble guys. Anyone found any insight into this or possibly a fix?
loopyoyo said:
Having the same trouble guys. Anyone found any insight into this or possibly a fix?
Click to expand...
Click to collapse
My battery life got a lot better with the new Franco kernel but the USB-debugging is just gone. I was wondering if maybe one of the recovery developers could help here. The USB brick solution for the HTC Desire was via Cyanogenmod. But I don't think that they know the solution since it isn't a very common problem as it seems...
Ultraschorsch said:
My battery life got a lot better with the new Franco kernel but the USB-debugging is just gone. I was wondering if maybe one of the recovery developers could help here. The USB brick solution for the HTC Desire was via Cyanogenmod. But I don't think that they know the solution since it isn't a very common problem as it seems...
Click to expand...
Click to collapse
Tap Build Number in about phone 10 times.
zephiK said:
Tap Build Number in about phone 10 times.
Click to expand...
Click to collapse
Thanks, but I already did that when I rooted my N4. Turning USB debugging on and off and on again didn't help.
Ultraschorsch said:
Thanks, but I already did that when I rooted my N4. Turning USB debugging on and off and on again didn't help.
Click to expand...
Click to collapse
Yea...computer doesn't even recognize nexus under recovery or fastboot menus..I think it's really fooked up. Just submitted a rma request to lg so will see how this plays out.
I have the same problem. Did the rma work out? I am wondering about doing that too and how to go back to stock without usb working...
studjuice said:
I have the same problem. Did the rma work out? I am wondering about doing that too and how to go back to stock without usb working...
Click to expand...
Click to collapse
I have teh same problem.
1) the battery drains like crazy, even with franco kernel lastest nightly
2) USB debugging does not work now... when plugging into the pc the phone is just not found...
3) I can reboot to recovery but that doesnt do me any good since I cant do jack from it.
anyone has any insight ? what can be going on that the phone is not showing up in windows
studjuice said:
I have the same problem. Did the rma work out? I am wondering about doing that too and how to go back to stock without usb working...
Click to expand...
Click to collapse
return to stock with a bad USB n4
http://forum.xda-developers.com/showthread.php?p=36046198
Sent from my Nexus 4
spaceman860 said:
return to stock with a bad USB n4
http://forum.xda-developers.com/showthread.php?p=36046198
Sent from my Nexus 4
Click to expand...
Click to collapse
even if you return it to Stock, you still cannot connect to USB...
what to do ? call google and ask for an RMA?
al3b3d3v said:
even if you return it to Stock, you still cannot connect to USB...
what to do ? call google and ask for an RMA?
Click to expand...
Click to collapse
Yes. If your on stock with a locked bootloader your warranty is still good
Sent from my Nexus 4
al3b3d3v said:
even if you return it to Stock, you still cannot connect to USB...
what to do ? call google and ask for an RMA?
Click to expand...
Click to collapse
Yes, I called Google but they don't have any N4's in stock. so I keep rooted until I get a new device from them.
Got this strange problem. Every time when I connect G4 with my Win7 PC via USB, the "Moto G(4)" icon shows up but it is empty under it. I will have to go to the Developer options to click on MTP again (even it is already set to MTP) to show the internal storage. This is really annoying extra step. Anyone knows what is the problem and how to fix it? Thanks.
[Update] Finally got it worked by following this thread:
http://forum.xda-developers.com/xposed/modules/mod-usb-marshmallow-1-0-t3272072
myasus said:
Got this strange problem. Every time when I connect G4 with my Win7 PC via USB, the "Moto G(4)" icon shows up but it is empty under it. I will have to go to the Developer options to click on MTP again (even it is already set to MTP) to show the internal storage. This is really annoying extra step. Anyone knows what is the problem and how to fix it? Thanks.
Click to expand...
Click to collapse
That setting in the developer options doesn't do anything. Every time you plug it in, it will default to charging and you have to click MTP in the notification. It was that way in the G3 also.
Tel864 said:
That setting in the developer options doesn't do anything. Every time you plug it in, it will default to charging and you have to click MTP in the notification. It was that way in the G3 also.
Click to expand...
Click to collapse
This is really annoying. Is there anyway to change it defaulted to MTP?
myasus said:
This is really annoying. Is there anyway to change it defaulted to MTP?
Click to expand...
Click to collapse
Not that I know of. I've done it so often on the G3 and now the G4 that it's habit.
Tel864 said:
Not that I know of. I've done it so often on the G3 and now the G4 that it's habit.
Click to expand...
Click to collapse
Finally got it worked by following this thread:
http://forum.xda-developers.com/xposed/modules/mod-usb-marshmallow-1-0-t3272072
myasus said:
Finally got it worked by following this thread:
http://forum.xda-developers.com/xposed/modules/mod-usb-marshmallow-1-0-t3272072
Click to expand...
Click to collapse
OK, I didn't know you were rooted.
It is a new security feature of Android since lolipop. It is to prevent malware on your pc targeting android connected phones. So that if you were charging it couldn't switch to connect storage without explicit approval on the phone itself.
My Android Auto is stopped working when i manually update to 1.1.3
Anyone seeing the same issue? Is there a way to downgrade to 1.1.2?
Also, i had performed factory reset on 1.1.3 and it didn't helped, AA is still not working.
you shouldn't have done that
UserNamist said:
you shouldn't have done that
Click to expand...
Click to collapse
yes lesson learned in a hard way. so i need to downgrade to previous version or use my other phone since i rely heavily on AA...
ok problem solved. i need to manually go to phone usb setting and select file transfer. what a rookie mistake.
I still not updatedbecause it didn't appeared and I'm in 1.1.2 and Android auto doesn't work it shows black screen in my car and the phone says it's connected.
Gerard03 said:
I still not updatedbecause it didn't appeared and I'm in 1.1.2 and Android auto doesn't work it shows black screen in my car and the phone says it's connected.
Click to expand...
Click to collapse
It doesn't work on 1.1.2 for you?
panni said:
It doesn't work on 1.1.2 for you?
Click to expand...
Click to collapse
No it doesn't just black screen in the car and the phone says it's connected, also the first time I done it it showed the Android auto introduction screen on the phone, but the screen remains in black.
Gerard03 said:
No it doesn't just black screen in the car and the phone says it's connected, also the first time I done it it showed the Android auto introduction screen on the phone, but the screen remains in black.
Click to expand...
Click to collapse
have you checked your usb connection option when connected to AA? there should be an option for selecting either file transfer/AA, USB tethering, MIDI, PTP, and no data transfer (default selection).
advanxer said:
have you checked your usb connection option when connected to AA? there should be an option for selecting either file transfer/AA, USB tethering, MIDI, PTP, and no data transfer (default selection).
Click to expand...
Click to collapse
No but I will check. I didn't know you need to do that to use AA.
So this is not related to 1.1.3. Please stop picking this thread up in other threads and stop posts like "there are issues with 1.1.3 and Android auto". Thanks!
advanxer said:
My Android Auto is stopped working when i manually update to 1.1.3
Anyone seeing the same issue? Is there a way to downgrade to 1.1.2?
Also, i had performed factory reset on 1.1.3 and it didn't helped, AA is still not working.
Click to expand...
Click to collapse
Gerard03 said:
I still not updatedbecause it didn't appeared and I'm in 1.1.2 and Android auto doesn't work it shows black screen in my car and the phone says it's connected.
Click to expand...
Click to collapse
panni said:
It doesn't work on 1.1.2 for you?
Click to expand...
Click to collapse
This is not from the Nothing OS 1.1.3 update, but from the Android Auro update
The most common message users report seeing is "phone not compatible" when pairing their device via the Android Auto app. What happens on the car screen depends on the specific make and model, but it's usually an error message of some sort, with some user submissions shown below.
The issue appears to be Android version independent and related solely to the Android Auto 7.8.6 update.
Google representatives responded to the thread, asking for more details about the user reports, including Android Auto version number, smartphone model, car make/model and other relevant data. But for the past three days, Google has remained silent on the issue besides mentioning that the information has been passed on to the Android Auto team.
If you're having problems, downloading an earlier version of Android Auto may solve the problem, and you can also try signing up for the beta programme while you wait for a fix for the app.
Ok thanks I will try.
Gerard03 said:
Ok thanks I will try.
Click to expand...
Click to collapse
If you want, go to see this news from AndroidSage : https://www.androidsage.com/2022/08...8-0-6-beta-apk-with-new-features-coolwalk-ui/
I am not sure whether my previous issue was related to specific Nothing OS or AA version. But here's what i had observed:
In 1.1.2, i can simply plug in the AA usb cable to the Nothing phone (with locked screen) and AA will load automatically on the car HU.
In 1.1.3, that did not happened. After connecting the USB cable, AA will not load automatically. Instead, i will need to unlock my phone, go to USB Accessory setting and change either from "File transfer" to "No data transfer" or from "No data transfer" to "File transfer", then only AA will load on my HU. Since this setting is not permanent, i need to repeat this steps every single time i want to use AA.
Works perfectly fine here
Funny, i changed from S22 Ultra and now all troubles with Android Auto is gone, louder navigation and the 1-3 sec of silence every 5 mins when playing music is gone, OnePlus 8t Samsung s20 fe 5g and s22 Ultra all had the same issues, now i can finally enjoy music while driving!
Android-Desire said:
Funny, i changed from S22 Ultra and now all troubles with Android Auto is gone, louder navigation and the 1-3 sec of silence every 5 mins when playing music is gone, OnePlus 8t Samsung s20 fe 5g and s22 Ultra all had the same issues, now i can finally enjoy music while driving!
Click to expand...
Click to collapse
Doubt that's an hardware or phone issue.
It's an AA issue mostly. I haven't had any problems with my OP8T for example. On some phones i had issues but after clearing cache, force close and reinstalling AA it worked flawless.
P6P said:
Doubt that's an hardware or phone issue.
It's an AA issue mostly. I haven't had any problems with my OP8T for example. On some phones i had issues but after clearing cache, force close and reinstalling AA it worked flawless.
Click to expand...
Click to collapse
Wierd how there is no issue on this phone out of any phone i have used before.
Can we mark this thread as fixed?