BIG thanks to roggin for releasing his source.
Added features:
Voltage control (use setcpu/ "pimp my cpu" or System Tuner for controlling uv).
Update to 2.6.36.4
OC to 1.64Ghz (use 1.5Ghz on daily basis, 1.6 and 1.64 not stable on all tablets)
memcpy performance patch (14% increase)
Updated wifi driver
Update video drivers
BFQ
automated per session task groups
Enabled modules:
TUN
CIFS
NTFS (Write support)
UTF8
NFS
USB_WWAN
OPTION
HFS
Flash kernel with recovery (thor2002ro)
If you have lag please use ondemand governor!
As of 3.0 this is only for Honeycomb 3.2. For an older version of this kernel to use on HC 3.0/3.1 check here: http://xda.richardtrip.org/Acer/a500/kernel/
Download: http://xda.richardtrip.org/Acer/a500/kernel/Villain_iconia_kernel_3.7.zip (md5sum:41ab0489a01d049520f578f7e954c6eb)
Source: https://github.com/richardtrip/Iconia_a500_3.1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credits and thanks to:
roggin (kernel source)
sc2k (itsmagic)
mdeejay (oc patch)
thor2002ro (recovery)
Johny0906 (testing)
reserved
Changelog:
Version 3.7:
Added some tweaks from morfic (thanks to morfic for sharing).
Edited ramdisk image (more like 3.4 version)
Added JRCU (An RCU for SMP with a single CPU garbage collector)
Version 3.6:
Fix sound driver (thanks to ardatdat)
changes to boot img (please test if you had problems with 3.5)
Version 3.5:
Added dhcp renew service
Sound driver updates
media: video: tegra: fix ov2710 preview tearing issue.
ARM: tegra: ventana: VDD_DDR_RX should NEVER be powered off
video: tegra: provide blank that clears screen
arm: tegra: ventana: HDMI audio while screen is blank
ALSA: hda - Store PCM parameters properly in HDMI open callback
i2c: fix crash when there is no regulator
arm: tegra: secureos: restore L2 AUX_CTRL during LP0 resume
[arm: tegra: power: fix LP2 scheduling in atomic
enable gpio for headphone detection
Version 3.4:
Fixed H.264 video
Fixed thermal throttle on heavy benchmarking
Version 3.3:
Complete rebase to official acer A501 3.2 kernel (a501 should work now)
added ftdio support (request Dennis Bappert)
Version 3.2:
Fixed Cell Standby (add ro.carrier=wifi-only on Taboonay and HoneyVillain to /system/build.prop).
Version 3.1:
Fixed touchscreen sometimes unresponsive from wake (new driver)
Reverted to older wifi driver (hope to fix probs for some people).
Version 3.0:
Fixed graphical problems for 3.2 (only for HC 3.2 as of now).
Version 2.5:
Acquire wake_lock from alsa kernel when pcm playback/capture starts and hold it until playack/capture ends. It is needed to prevent device from going into suspend state in middle of audio playback.
video: tegra: dc: Fix no_vsync hang issue.
Disable Interactive Governor
Fix issue of right channel remains silent while stereo recording through camera app.
video: tegra: check for hdmi peripheral during resume
video: tegra: nvmap: Fix cache flush issue during page alloc.
Version 2.4:
Add 1.6 and 1.64Ghz
Revise voltage control interface (thanks to TDR)
Wifi updates (again
Video driver updates
Switch to Simple IO scheduler
3D clock changes
Version 2.3:
register USB accessory driver for gamepad support!
Thanks to Johny0906 for testing!
Version 2.2:
Added and switched to JRCU (An RCU for SMP with a single CPU garbage collector)
Power Management fixes
Tweaked ondemand governor
Added Taboonay compatibility
Video driver updates
Version 2.1:
Fixed incorrect bogomips on second core
Enabled HFS support
Enabled Magic Trackpad
Version 2.0:
Fixed UV table
Version 1.9:
Fixed UV for lower frequencies
Video driver updates
Wifi driver updates
Compiler optimizations
Lots of small updates/fixes
Version 1.8:
Complete rebase to official 3.1 acer source
Version 1.7:
Fixed GPS
Version 1.6:
Disable Mobile Data if needed (add ro.carrier=wifi-only to /system/build.prop)
Added HFS (Apple filesystem)
Version 1.5:
Fixed some missing config stuff (thanks to thor2002ro)
Version 1.4:
Fixed usb detection (storage/3g)
Version 1.3:
Added wakelock for usb (no more sleep)
switched to ondemand governor
lots of small fixes.
Version 1.2:
Fixed USB sleep problem
Version 1.1:
BFQ io scheduler
automated per session task groups
lots of small fixes
Version 1.0:
BIG thanks to roggin for releasing his source (paypal this: [email protected])
Added features:
Voltage control (use setcpu for controlling uv).
Update to 2.6.36.4
OC to 1.5Ghz
memcpy performance patch (14% increase)
Updated wifi driver
good to c this
can it be use on tabooray based rom?
alvanyap said:
good to c this
can it be use on tabooray based rom?
Click to expand...
Click to collapse
Should work.
does it support encryption (thus it supports enterprise emails -exchange-), otherwise i have to live without it.
first of all, big thanks to roggin and you for releasing this kernel. And of course to all the others who paved the way to this point.
i've created my own custom image tonight which is based on the .22 image (unfortunately the .30 download link was gone). So far it works and i'm happy for now.
But i noticed that the usb connection got interrupted after the screen blanked. I've never noticed this before (it might be that i haven't copied larger files so far, so probably that would happen with the default kernel as well).
Could it be that the power saving code turns off the usb connection ?
Question
how to save "stock kernel"?
I would like try this kernel then maybe swap back to stock?
@richardtrip
Please create stock kernel backup for roll back purpose. Thanks.
Can I flash over my stock acer rom? Or do I need to install a custom rom first?
At the moment I just need all the features this kernel offers.
Thanks
Sent from my A500 using XDA Premium App
netarchie said:
Can I flash over my stock acer rom? Or do I need to install a custom rom first?
Click to expand...
Click to collapse
The thread title says this kernel is for stock ROM
Nice work richard, glad to see roggin's kernel get posted with a little overclock action! I am very excited that there is a true open source git going now.
Here is a CWM zip to flash back the stock 3.1 Acer kernel (official release) including the two stock kernel modules (bcm4329.ko and scsi_wait_scan.ko). I have been working on my own custom kernel and first created this so I could flash back to stock 3.1 whenever I wanted to test the differences.
Flash using thor CWM with itsmagic...this does NOT have itsmagic built-in
I still recommend backing up your own system and boot partitions in the latest stable CWM.
View attachment acerkernel31.zip
SHA 799c0738d740cde8bc339c8402d09983741b2c4c
A great kernel! We have now a truly open sourced 3.1 kernel that works perfectly with stock 3.1 ROM.
I have also modified roggin's kernel with OC & some cherry picks from other kernel guru including OP's commits.
Quadrant score get over 32xx which is very promising. Thanks again for all the works.
EDIT: One thing I notice is that the speed of obtaining IP address is drastically increased! After opening the wifi tether of my mobile phone, A500 obtains IP address almost instantly! (when comparing with stock kernel)
I just flashed this a few minutes ago. How do you use the native NTFS support?
Chlballi
ardatdat said:
A great kernel! We have now a truly open sourced 3.1 kernel that works perfectly with stock 3.1 ROM.
I have also modified roggin's kernel with OC & some cherry picks from other kernel guru including OP's commits.
Quadrant score get over 35xx which is very promising. Thanks again for all the works.
EDIT: One thing I notice is that the speed of obtaining IP address is drastically increased! After opening the wifi tether of my mobile phone, A500 obtains IP address almost instantly! (when comparing with stock kernel)
Click to expand...
Click to collapse
I'd really like to find out why I only pull off half off that score @ 1.5ghz. Using this kernel and stock 3.1 ota. I used to score alot higher.
Hi richard,
Coooool, nice work, It's what I love to see
Every cool developer can add his nice work to the kernel, and we will get the best kernel here
Thanks
ok i did not get the answer, but i checked on myself: encryption is working, so exchange sync is possible.
excellent.
everything seems to work so far including O/C using setCPU.
using 1408 i got a quadrant score of 2368 (second test, because the first one always gives the wrong result)
zoubidou said:
ok i did not get the answer, but i checked on myself: encryption is working, so exchange sync is possible.
excellent.
everything seems to work so far including O/C using setCPU.
using 1408 i got a quadrant score of 2368 (second test, because the first one always gives the wrong result)
Click to expand...
Click to collapse
Well to clarify, I just did three runs back to back and the highest I got was 2652, which is alot better for 1.5ghz, but a far cry from the 3400-3600 I used to get before 3.1. Oh well no biggie. I'm back on 3.1 stock with the .38 ota update while waiting for Acer to put out something even half as decent as what these XDA dvs release. Looking forward to 3.2 coming down the pipe. Great job on the kernel by the way, I'll more than likely come back to it in a week. Still waiting on somebody to of the gpu like with Xoom tiamat, just for comparison and because I like to push my hardware.
Maybe I have modified to use 400 gpu such that I get over 32xx.
By the way, Acer must have some tweaks to make the stock kernel faster than this one.
Don't be setting too much store in benchmarks, guys. All they do is measure artificial tests and rarely, if ever, have anything to do with real world performance.
Benchmarking is, and always has been, a load of complete cobblers, on any machine.
cq842000 said:
Well to clarify, I just did three runs back to back and the highest I got was 2652, which is alot better for 1.5ghz, but a far cry from the 3400-3600 I used to get before 3.1. Oh well no biggie. I'm back on 3.1 stock with the .38 ota update while waiting for Acer to put out something even half as decent as what these XDA dvs release. Looking forward to 3.2 coming down the pipe. Great job on the kernel by the way, I'll more than likely come back to it in a week. Still waiting on somebody to of the gpu like with Xoom tiamat, just for comparison and because I like to push my hardware.
Click to expand...
Click to collapse
Hi cq842000,
so you get 3400-3600 in stock 3.1 Acer's kernel ? Or it's in 3.0 kernel ?
Thanks
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Komin http://code.google.com/p/teamkomin/people/list
Team Komin presents
This is released as a full sane build only.
Download Andromeda3
mirror:http://teamkomin.googlecode.com/files/Andromeda3.zip
Remix Andromeda3 at UOT Kitchen
http://uot.dakra.lt/kitchen/
UOT Kitchen provides the ability to make your own custom release of Andromeda3.
Introduction:
In the beginning there was the work. In that work is Andromeda, and in Andromeda is the work. We've released Andromeda 1.0/2.0, 1.1/2.1, and 1.2/2.2. This is Andromeda3. Andromeda3 is the result of countless hours of development. Andromeda3 is the single Clockwork Mod flash-able ROM you should keep at all times in your phone's downloads folder. It just works.
This ROM contains the fastest kernel, the best combination of software, and it delivers outstanding battery life. Because of this, we feel it sets the standard which all ROMs should strive to attain.
For maximum battery life, disable “Auto adjustment of brightness” and “Auto rotation” under settings for the battery experience you've always wanted. These are classy and useful, but thanks to Samsung's driver, they can eat up to 25% of your processor at idle under certain conditions.
Release Notes:
You can see the release notes here: http://code.google.com/p/teamkomin/updates/list
There's 4 pages of release notes, so here's a short list of features:
Issues addressed and fixed:
Call volume Low
Swype Keyboard expired
Missing debug symbols
Samsung handwriting keyboard
BLN Control inop
Camera inop
Geotagging enabled by default on camera
Samsung 3x4 keyboard
App crash: Note-to-self crashes
App crash: Better Keyboard 8
Miscellaneous links missing
LoopFS Support
and many others...
Security Exploit
An exploit discovered post-release requires this patch http://forum.xda-developers.com/showthread.php?t=1013385
I'd like to remind users that Android 2.3 is on the horizon near the end of the month and we will not be releasing an updated version as Samsung has reported 2.3 will be available by 1June2011
New In the ROM:
Quicker GPS Lock
TKTouchWiz (Team Komin's Touch-wizard interface modified for experience)
TKBackgrounds (Team Komin's backgrounds, dark fractals and carbon fiber)
Faster HSDPA/HSUPA (the H logo means you can get nearly double Internet speeds over 3G)
Swype (will not expire)
Camera (GPS is optional, power button takes picture-GizmoDroid )
SGSTools (now with options to install new roms including Andromeda)
New Ring-tones/Alarms/UI(sound options from AOSP and AT&T)
Fully updated 2.2 core apps (as of today)
BASH - Bourne Again SHell for terminal access - run "bash" from the terminal
TCPDump - for wireless packet sniffing. Get an app called "shark native" from the market to see what your phone is transmitting/receiving.
Bluetooth Printing
Miscellaneous UI and sound level Tweaks for a better user experience
Updates and Maintained features:
Mobile Access Point (use your phone as a router for your laptop)
clockworkmod
Root/superuser permissions
Busybox
8 option power menu
Super add blocking hosts
install any app without sideloading
5 lock-screens
TKVoodoo control (Team Komin's Voodoo control app)
Kernel support UI (Back-light Notification and Voodoo Sound)
MTM Gingerbread Keyboard wp7
Titanium Backup
Simi Clock
BLN Control
BattStatt
TAJM
Stock Apps Included:
Allshare
contacts
calculator
gmail
google search
latitude
calendar
clock
navigation
google sky map
task manager
Samsung Apps
maps
messaging
facebook
gallery
memo
market
my files
places
voice recorder
video player
talk
voice search
youtube
Car Home
AppWidgetPicker
Spare Parts
New On the Kernel side
Optimized battery life
Optimized Scaling Speed when you need it
FUGU Tweaks
Voodoo Lag-fix
Voodoo Sound 6
Better Linux support for your Android with no sacrifices to speed or battery.
Recovery mode features
Advanced: Wipe Battery stats, Wipe dalvik cache, report errors, key test, partition sdcard, fix permissions, restart android debugger, Reboot to download mode
Voodoo: Enable/Disable lagfix for /system and other partitions, voodoo debug messages on/off.
Apply sdcard update.zip, wipe data/factory reset, wipe cache partition, install zip from sdcard
Backup/Restore: Nandroid Backup/Restore/Advanced restore
Mounts: Mount USB Storage to computer, Various mounting/unmounting/formatting options
I'll let mxracer101 explain all of the rest and how it works
Latest Nightly builds:
http://files.teamkomin.com/Andromeda/nightly/ and http://files.teamkomin.com/Andromeda/nightlies/
Originally, our Nighties were hosted on Google code. We ran out of space on the SVN and re-hosted on our Team Komin server. The SVN revision were reset to 0 as a result of clearing out all data. No data loss occurred, only nightly builds were affected. Anyway, the latest nightly build is always symlinked here: http://files.teamkomin.com/Andromeda/AndromedaNightly.zip
Here is a full list of Andromeda3 bug fixes:http://code.google.com/p/teamkomin/...+Priority+Milestone+Owner+Summary&cells=tiles
Thanks
Special thanks to the following (in no specific order):
Modem testing and verification - perosredo
Development, Packaging, Testing, and Verification - Team Komin
An extra special thanks to our unsung hero mxracer101. The kernel is the most important and unnoticed part of any ROM. The kernel is the pillar which the android layer stands upon. mxracer101 has developed the i9010 kernel for our phones which provides indisputable performance gains over stock, all previous build and provides compatibility with nearly everything... Like running Ubuntu 10.10. This is all done by building specific parts of the kernel as modules which are loaded when required rather then delete them or bog down the kernel by building them into it.
Thanks to nbs11 for this promo video based on 2.0
http://www.youtube.com/watch?v=bDey0XVhwvA
Links
Andromeda Q&A:http://forum.xda-developers.com/showthread.php?t=962276
Downloads:http://files.teamkomin.com/
Google Developer Site(packaging and development): http://code.google.com/p/teamkomin/
GIT Development Site (Kernel):https://github.com/TeamKomin
People of Team Komin: http://code.google.com/p/teamkomin/people/list
Speak to a developer, Live Technical Support: http://webchat.freenode.net/?channels=#teamkomin
Video on how to flash
See this thread for more information on flashing: http://forum.xda-developers.com/showthread.php?p=12476779#post12476779
Official Signature:
<---Insert Awesome Here
Code:
[URL="http://teamkomin.googlecode.com"]
[IMG]http://i55.tinypic.com/16otpf.png
<---Insert Awesome Here
Click to expand...
Click to collapse
This is released as a full sane build only.
Download Andromeda3
mirror:http://teamkomin.googlecode.com/files/Andromeda3.zip
You can obtain our ursa minor #2 kernel here
Download ursa minor #2
mirror:http://teamkomin.googlecode.com/files/UrsaMinor.zip
Our builds work like stock, only better.
Contributions and Themes:
MattedBlues ported by timbrendelaz
http://forum.xda-developers.com/showthread.php?t=1055648
Animation Mod by DAGr8
http://forum.xda-developers.com/showpost.php?p=15275661&postcount=1015
http://www.filesonic.com/file/1347304144/UNTHEMED_UIanim_RC1a_cwm.zip
See DAGr8's post here http://forum.xda-developers.com/showpost.php?p=12334836&postcount=6
and others.... http://forum.xda-developers.com/showthread.php?t=1035632
reserved 10char
-----EDIT-----
Speed is everything
Here's to changelogs
This post will be useful in the future, but right now is just me babbling on
Yes, there is a duck on my face
Taken
10.. a nevermind...
Kernel Info
I'll reserve one for fun
What's in UrsaMinor kernel?
Boosted in call volume
Applied hardcore's mic bias tweaks
Wifi and Camera drivers ported from JPX
Jhash updated to jhash3
Lowmemorykiller upgraded for TinyRCU compatability from http://android.git.kernel.org/?p=ker...3cbfcb015577a9
ext4 patched and upgraded from http://www2.kernel.org/pub/linux/ker.../ext4-patches/
Kernel hz set to 100
Tiny RCU patched and upgraded from http://android.git.kernel.org/?p=ker...90160a18caf95d
Supercurio's voodoo lagfix
Supercurio's voodoo sound v7
Supercurio's voodoo color and sharpness fix
Neldar's backlighnotification 2.3 built in from https://github.com/project-voodoo/ba...ernel_patches/
Compiled using codesourcery 2010.09.51 tool chain which should be faster and more battery efficient
Android_Logger (Logcat) disabled by default - enable via adding an empty file on the internal sd card named enable_debug
TUN support for VPN
CWM v2.5.1.3 (from voodoo lagfix)
Optimized compiler flags: -O2 -mcpu=cortex-a8 -mfpu=neon -mfloat-abi=softfp
10 point multi touch support
enabled CONFIG_OABI_COMPAT for fugu tweaks compatability
3 pole headset call support
Memory configs:
CONFIG_ANDROID_PMEM_MEMSIZE_PMEM=2048
CONFIG_ANDROID_PMEM_MEMSIZE_PMEM_GPU1=4096
CONFIG_ANDROID_PMEM_MEMSIZE_PMEM_ADSP=1500
CONFIG_WLAN_SAMSUNG_MEMSIZE_BCM=256
CONFIG_VIDEO_SAMSUNG_MEMSIZE_FIMC0=12288
CONFIG_VIDEO_SAMSUNG_MEMSIZE_FIMC1=1024
CONFIG_VIDEO_SAMSUNG_MEMSIZE_FIMC2=12288
CONFIG_VIDEO_SAMSUNG_MEMSIZE_MFC0=32768
CONFIG_VIDEO_SAMSUNG_MEMSIZE_MFC1=32768
CONFIG_VIDEO_SAMSUNG_MEMSIZE_TEXSTREAM=10240
CONFIG_VIDEO_SAMSUNG_MEMSIZE_FIMD=3072
Thanks to:
supercurio
chrisryn
existz
xcaliburinhand
hardcore
for either the help with source or the help with questions on the kernel.
If I've missed anyone I apologize and will add you if you remind me.
V1 of JUST the kernel attached here for postarity
V2: (download from the 1st post above)
Updated to voodoo sound v7
Updated to include voodoo color and sharpness fix
Updated config for VPN support
This is huge!!!! Andromeda 3.. looking great
More Contributions and Themes:
Sensation by icezar1
http://forum.xda-developers.com/showthread.php?t=912656
Percent Battery Mod by creepyncrawly
http://forum.xda-developers.com/showthread.php?t=1006736
Dark Fire by 10tonhammr
http://forum.xda-developers.com/showpost.php?p=12807166&postcount=1
Blue Fire by 10tonhammr
http://forum.xda-developers.com/showpost.php?p=12807179&postcount=2
Honeycomb Theme by timbrendelaz
http://forum.xda-developers.com/showthread.php?t=1049192
Hoolm Custom Colors Battery Mod for Andromeda3 by mod777
http://forum.xda-developers.com/showpost.php?p=13154278&postcount=556
Andromeda3 Email with No Exchange Server Security by mod777
http://forum.xda-developers.com/showpost.php?p=13145102&postcount=554
and others.... http://forum.xda-developers.com/showthread.php?t=1035632
Ok I don't mean to really ask, but will this work with the andromedena tek galaxy theme? I really like that theme, and the ROM I only want to try the newest one. Keep up the awesome work
EDIT: the theme does indeed work on A3 if anyone wanted to know
Sent from my SGH-I897 using XDA Premium App
download link is wrong.
http://files.teamkomin.com/Andromeda/Andromeda3-Final.zip
You didn't do what I just think you did...
So this is still based on the GA 9010 ROM?
aehlayel said:
You didn't do what I just think you did...
So this is still based on the GA 9010 ROM?
Click to expand...
Click to collapse
of course it is
Pirateghost said:
download link is wrong.
http://files.teamkomin.com/Andromeda/Andromeda3-Final.zip
Click to expand...
Click to collapse
Try this one
http://files.teamkomin.com/
krips2003 said:
Try this one
http://files.teamkomin.com/
Click to expand...
Click to collapse
/facepalm
i know....where do you think i got the proper link that i posted?
Thank God, this rom has only 1 issue. Good to see 'SANITY' mentioned in the thread.
Pirateghost said:
of course it is
Click to expand...
Click to collapse
awesome, so i'm assuming that there will be no need to wipe for users coming from 1.2?
another thing that crosses my mind.. audience chip, it's been incorporated since the day 1 afaik..
is it only compatible with the 9010 modem (jl2) and the captivate modem (kb1)? Only?
Pirateghost said:
/facepalm
i know....where do you think i got the proper link that i posted?
Click to expand...
Click to collapse
I know where you got that one.... Never mind, I too clicked first
To err is human
this needs to be bumped back to the top
Where is the ORANGE?
Very sane indeed. Will take it for a spin in the weekend.
Sent from my SAMSUNG-SGH-I897 using XDA App
The orange is right here
Orange is a bright color, bad for battery life.
AdamOutler said:
The orange is right here
Click to expand...
Click to collapse
Nice but I actually had pretty great battery life with 2.1
STANDARD DISCLAIMER: USE AT YOUR OWN RISK. By running this firmware mod, you agree that there is the possibility that you may brick your device and neither myself, XDA nor Viewsonic are responsible for supporting you if that occurs. In this case, it is required that you learn and setup nvflash prior to running this mod.
1. Make 100% sure you are at Bootloader 1.2
2. Recommend using Clockworkmod v3.0.2.8 (Bootloader 1.2) tools for flashing.
These are CM7 based ROMs for gtablet with bootloader 1.2(ZPAD T2 should work. But no confirmation from any one yet). It is an integration of different CM7 based rom build and Clemsyn ver 11 1.5ghz Kernel / Pershoot 1.4ghz Kernel (bootloader 1.2) with some tweak learning from Calkulin's Rom. It is pretty similar to Calkulin+Clemsyn 1.5ghz Froyo Combo VERSION 6, while it is for gingerbread.
All the credit goes to the authors of the based rom and kernel. Special thanks to Roebeet for his excellent works on gtablet.
Features:
1. Overclocked by default (max frequesy adjusted by battery level) (For Clemsyn's kernal, check on his original kernel post on how to undervolt with pimpmycpu)
2. Tweaked internal storage & SD card read speeds
3. Annoying ads in programs are blocked
4. Calkulin's battery saving script
Issues:
1. usb pc mount does not work on Clemsyn's kernel
=====
Latest CM7.1 RC1 build from [email protected]: http://www.mediafire...rnr0g9fsxibubbf
=====
===============
Clemsyn 1.5ghz Kernel (bootloader 1.2)
===============
Links:
cm7.0.3 (GB2.3.3, stable build):
http://www.mediafire.com/?8oucsc81csl5m75
cm7.1RC (GB2.3.4, latest build):
http://www.mediafire.com/?7111c0jwza1ea37
gapps:
http://www.mediafire.com/?7yrr1b2sce6sw8l
VEGAn-GE-7.0.0-RC1-Harmony (GB2.3.3, stable build):
http://www.mediafire.com/?upb49eq4d7vpzva
****************************************************************
===============
Pershoot 1.4ghz Kernel (bootloader 1.2)
===============
cm7.0.3(GB2.3.3, stable build):
http://www.mediafire.com/?ob7fxkk9btuwoxc
cm7.1RC(GB2.3.4, latest build):
http://www.mediafire.com/?692chz2lcpektmp
gapps:
http://www.mediafire.com/?7yrr1b2sce6sw8l
VEGAn-GE-7.0.0-RC1(GB2.3.3, stable build):
http://www.mediafire.com/?8xur9w9wh5i4j94
For those who want to build the CM7.1 RC1 or nightly build, take these steps:
1. grab the cm7.1 build, grab pershoot/clemsyn GB kernel for BL1.2, grab the build_script from my cm7.1 rc0 rom.
2. merge the pershoot kernel ans system directory into the cm7.1 build. replace any files if it already existed. replace the build_script with the build_script in my rom.
3. zip them and you should have a cm7.1 for BL1.2 with pretty much the same as BL 1.1. Make sure the directory structure is correct in the zip file.
4. you could use this trick for pretty much all the GB roms based on cm7 mixed with any GB kernel
Warning: this is not and not intend to be a detail instruction. you should at least have certain degree of knowledge about what is going on with this and what this is all about to build a rom. If you brick your device by any chance, I am definitely NOT the right one you would look after. If you are not sure, wait someone else to build the rom for you.
Downloading now! Thanks!
Feels good. It is very smooth. Quadrant scores 3400 out the gate. Very cool.
Is the nvrm_daemon edited in this rom to bring the refresh up to 60?
Wondering if I still need to install this to take the refresh up.
Vlad_z said:
For those with CM7.0.3 you may want to try this version of nvrm_daemon.
I took original file from my CM7.0.3 stable ROM and modified it to have 60Hz update rate.
Click to expand...
Click to collapse
Are gps apps still broken on this? Does Dsp still force close?
Its the same gapps/ DSP manager from March so yeah it still does.
heres a small banner i made for you.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
A nice option for 4349 users who don't want to risk jumping back to 1.1. Thanks for setting these up!
I've been requesting that the cyanogenmod devs actually consider doing this, as well. I also heard a rumor (and it's just a rumor) that a new stock ROM is in the works, and will likely replace 4349 and be on 1.2 as well. So I personally think it's in our best interest to start moving to 1.2 (plus that's likely to be what any HC ROM will be on).
roebeet said:
A nice option for 4349 users who don't want to risk jumping back to 1.1. Thanks for setting these up!
I've been requesting that the cyanogenmod devs actually consider doing this, as well. I also heard a rumor (and it's just a rumor) that a new stock ROM is in the works, and will likely replace 4349 and be on 1.2 as well. So I personally think it's in our best interest to start moving to 1.2 (plus that's likely to be what any HC ROM will be on).
Click to expand...
Click to collapse
nicely said
any chance of froyo on 1.2?
Already done, just not here on XDA. I started posting again after a 2 month hiatus, but I'm not moving my 1.2 ROMs here except as a link (and I'm not permitted to do that).
Google "gtablet 1.2 firmware" and you'll find them.
roebeet said:
Already done, just not here on XDA. I started posting again after a 2 month hiatus, but I'm not moving my 1.2 ROMs here except as a link (and I'm not permitted to do that).
Google "gtablet 1.2 firmware" and you'll find them.
Click to expand...
Click to collapse
so on slatedroid?
i only see 7 roms on there. And i mean a froyo NON TNT based rom. you have one over there?
Brilliant Corners. It feels just like froyo with some tablet tweeks. The only UI diffference I notice in tnt base roms is the notification bar and system settings.
transitoyspace said:
so on slatedroid?
i only see 7 roms on there. And i mean a froyo NON TNT based rom. you have one over there?
Click to expand...
Click to collapse
Brilliant Corners, as just mentioned, and Century Eyes. The latter used to be "gAdam" here on XDA but I ported it to 1.2 in April. It's the Notion Ink Adam EDEN UI, ported to the GTAB.
I don't think anyone's ported the zPad interface to 1.2, tmk. Although technically the newer zPad ROMs are 1.2-based themselves. I mention the Adam a lot, but I keep forgetting that the zPad is almost identical to ours and they moved to 1.2 a few months back, I believe.
roebeet said:
Brilliant Corners, as just mentioned, and Century Eyes. The latter used to be "gAdam" here on XDA but I ported it to 1.2 in April. It's the Notion Ink Adam EDEN UI, ported to the GTAB.
I don't think anyone's ported the zPad interface to 1.2, tmk. Although technically the newer zPad ROMs are 1.2-based themselves. I mention the Adam a lot, but I keep forgetting that the zPad is almost identical to ours and they moved to 1.2 a few months back, I believe.
Click to expand...
Click to collapse
how hard is it to make a zpad rom compatible with 1.2?
is it hard to port roms, i kinda want to start learning. Im decent at themeing.
The original zPad (Wifi) and our GTAB have identical hardware. Rothnic used to create mods of the zPad firmware, and it was mainly rooting it, altering the language to English and tweaking the apps as needed. But all the hardware worked as-is, including the camera. The original zPad firmware was 1.1 dev branch based, just like our GTAB was.
I heard that the zPad T2 is, I believe, 1.2 based. But don't quote me on that as I've never messed with that fimware (last update was in March, as per a quick Google search). If Malata managed to create a full GB or HC ROM for the zPad, we should be able to easily port that to the GTAB, easier than even the Adam.
As for ease, it's mainly a lot of trial and error, and lots of nvflashing when you soft-brick it. Even with the zPad, there's build.prop changes and app changes to make it more English friendly. Plus Gapps, of course.
There's a cm7.1 RC for the harmony platform? ?? Cool! I didn't know that
Beastly + Clemsyn Kernel is Froyo and based on 1.2 bootloader. Another great one from the Adam Developers.
mydave1 said:
Beastly + Clemsyn Kernel is Froyo and based on 1.2 bootloader. Another great one from the Adam Developers.
Click to expand...
Click to collapse
Hey Dave! I haven't tried Beastly yet (backing up BoS this very moment)...maybe it's time?
-Matt
mydave1 said:
Beastly + Clemsyn Kernel is Froyo and based on 1.2 bootloader. Another great one from the Adam Developers.
Click to expand...
Click to collapse
Very true - a favorite for the Adam device, and ported to the GTAB about a month(?) back.
gadgetrants said:
Hey Dave! I haven't tried Beastly yet (backing up BoS this very moment)...maybe it's time?
-Matt
Click to expand...
Click to collapse
I personally had both Calkulin's + Clemsyn and Beasty's + Clemsyn for my daily use for a while. Both rom perform supper well. supper snappy. the only problem for me is froyo does not support "wifi location" and it is unfixable as far as I know. I also get excited about the honeycomb rom for gtablet and use Roebeet's great BOS for a while. The UI is beautiful and it is reasonably stable and perform after 4.0. However, it is too laggy for my taste because of the lack of opengl support. The reason why I compile these roms are: I want the speed of those 2 great froyo roms. I also want to use a lot of applications that need wifi location support and I want to stay on 1.2.
The quadrant score of CM7.1RC + Clemsyn's is very close to the above 2 roms (around 4000 in my test). give CM7.1RC + Clemsyn or CM7.1RC + Pershoot a try if you like the speed of those 2 froyo's rom. You will be surprised by the performance of these 2 roms.
zyhong said:
I personally had both Calkulin's + Clemsyn and Beasty's + Clemsyn for my daily use for a while. Both rom perform supper well. supper snappy. the only problem for me is froyo does not support "wifi location" and it is unfixable as far as I know. I also get excited about the honeycomb rom for gtablet and use Roebeet's great BOS for a while. The UI is beautiful and it is reasonably stable and perform after 4.0. However, it is too laggy for my taste because of the lack of opengl support. The reason why I compile these roms are: I want the speed of those 2 great froyo roms. I also want to use a lot of applications that need wifi location support and I want to stay on 1.2.
The quadrant score of CM7.1RC + Clemsyn's is very close to the above 2 roms (around 4000 in my test). give CM7.1RC + Clemsyn or CM7.1RC + Pershoot a try if you like the speed of those 2 froyo's rom. You will be surprised by the performance of these 2 roms.
Click to expand...
Click to collapse
Thanks for the quick comparisons, I been on BoS and loving it but I'll try these out real quick for a day or two just to see how nice they are. And what you're saying is that these 2 do support wifi location right?
This is the official CM9 port for the P7300 and the P7310.
EXPERIMENTAL BUILDS 2012-09-03
These builds uses the Linux 3.1.10 kernel and the libs from the official P7310 ICS firmware (the P7300 has borrowed the RIL lib from the official P7500 firmware).
Known issues is some graphics glitches in landscape modes that sometimes appear and that running Google Maps makes Android restart after ~1 minutes use (There's something with the compass sensor driver that goes berserk). And yes, both cameras works.
Important: First install Clockwork 6.0.1.2 in the second post if this thread. If you use the old Clockwork you will get a black screen on the first boot and you will need to do a long press on power to get it running again.
EDIT 2012-09-05 - Do not use Clockwork 6.0.1.2, possible risk of bricking (not sure yet if permanent or if it can be fixed). Using old recovery works with the new builds but you will need to do a long press to get the display working after each time you have booted into recovery.
P7300: http://www.mediafire.com/?wft75e9zvu7e37o (untested)
P7310: http://www.mediafire.com/?ina1yc739svpq3b
Instructions
Be aware that everything you do is on your own risk!
Make sure you know your way around in Clockwork recovery.
BACKUP your old install
Install CM9, then install Google apps. Do not forget to wipe.
Downloads P7300 (wifi+3g)
2012-06-18 and later we have official nightlies. Go here to get them: http://get.cm/?device=p5
2012-06-16 cm-9-20120616-UNOFFICIAL-p5.zip
2012-06-08 cm-9-20120608-UNOFFICIAL-p5.zip
2012-05-17 update-cm-9.0.0-RC0-p5-UNOFFICIAL-signed-20120517.zip
2012-05-11 update-cm-9.0.0-RC0-p5-UNOFFICIAL-signed-20120511.zip
2012-03-30 update-cm-9.0.0-RC0-p5-KANG-signed-20120330.zip
2012-03-08 update-cm-9.0.0-RC0-p5-KANG-signed-20120308.zip
2012-03-04 update-cm-9.0.0-RC0-p5-KANG-signed-20120304.zip
2012-03-02 update-cm-9.0.0-RC0-p5-KANG-signed-20120302.zip
2012-02-27 update-cm-9.0.0-RC0-p5-KANG-signed-20120227.zip
2012-02-10 update-cm-9.0.0-RC0-GT-P7300-KANG-signed-20120210.zip
2012-02-08 update-cm-9.0.0-RC0-GT-P7300-KANG-signed-20120208.zip
2012-02-03 - update-cm-9.0.0-RC0-p5-KANG-signed-20120203.zip
2012-01-30 - update-cm-9.0.0-RC0-p5-KANG-signed-20120130b.zip
2012-01-27 - update-cm-9.0.0-RC0-p5-KANG-signed-20120127.zip
2012-01-26 - update-cm-9.0.0-RC0-p5-KANG-signed-20120126.zip
2012-01-24 - update-cm-9.0.0-RC0-p5-KANG-signed-20120124.zip
2012-01-23b - update-cm-9.0.0-RC0-p5-KANG-signed-20120123b.zip
Downloads P7310 (wifi only)
2012-06-18 and later we have official nightlies. Go here to get them: http://get.cm/?device=p5wifi
2012-06-16 cm-9-20120616-UNOFFICIAL-p5wifi.zip
2012-06-08 cm-9-20120608-UNOFFICIAL-p5wifi.zip
2012-05-17 update-cm-9.0.0-RC0-p5wifi-UNOFFICIAL-signed-20120517.zip
2012-05-11 update-cm-9.0.0-RC0-p5wifi-UNOFFICIAL-signed-20120511.zip
2012-03-30 update-cm-9.0.0-RC0-p5wifi-KANG-signed-20120330.zip
2012-03-08 update-cm-9.0.0-RC0-p5wifi-KANG-signed-20120308.zip
2012-03-04 update-cm-9.0.0-RC0-p5wifi-KANG-signed-20120304.zip
2012-03-02 update-cm-9.0.0-RC0-p5wifi-KANG-signed-20120302.zip
2012-02-27 update-cm-9.0.0-RC0-p5wifi-KANG-signed-20120227.zip
2012-02-10 update-cm-9.0.0-RC0-GT-P7310-KANG-signed-20120210.zip
2012-02-08 update-cm-9.0.0-RC0-GT-P7310-KANG-signed-20120210.zip
2012-02-03 - update-cm-9.0.0-RC0-p5wifi-KANG-signed-20120203.zip
2012-01-30 - update-cm-9.0.0-RC0-p5wifi-KANG-signed-20120130b.zip
2012-01-27 - update-cm-9.0.0-RC0-p5wifi-KANG-signed-20120127.zip
2012-01-26 - update-cm-9.0.0-RC0-p5wifi-KANG-signed-20120126.zip
2012-01-24 - update-cm-9.0.0-RC0-p5wifi-KANG-signed-20120124.zip
2012-01-23b - update-cm-9.0.0-RC0-p5wifi-KANG-signed-20120123b.zip
2012-01-23 - update-cm-9.0.0-RC0-p5wifi-KANG-signed-20120123.zip
2012-01-11 - update-cm-9.0.0-RC0-p5wifi-KANG-signed-20110111.zip
2012-01-09 - update-cm-9.0.0-RC0-p5wifi-KANG-signed-20110109.zip
Google apps for CM9 can be found here: http://goo-inside.me/gapps (Upgrading from an erlier Google apps may require a wipe to get everything working)
Changelog
2012-03-02 - We're official! But I'll keep uploading "nightlies" here until the buildbot starts spitting out new builds automaticly. However for changelog I recommend keeping and eye on what get's merged here: http://review.cyanogenmod.com/#q,status:merged,n,z
2012-02-27 - Freshly synced against CM repo.
2012-02-10 - Soft keyboard is now always enabled.
2012-02-08 - Changed PRODUCT_RELEASE_NAME to GT-P7300/GT-P7310. Synced source with CM9 where the required patches for 3G and KSM now has been merged.
2012-02-03 - Fixed battery stats (thanks motley) and also added KSM support.
2012-01-30 - Touchscreen driver rewritten to use multitouch slots which I believe is the new standard in ICS. Seems to work a lot better than the old method.
2012-01-27 - Updated 3G fix (airplane mode is supposed to be fixed). Added bluetooth toggle in notification area + wifi toggle.
2012-01-26 - Added undervolting and more overclocking frequencies (stolen from Motleys kernel). Fixed screenshot feature.
2012-01-24 - Both: Some improvements to Torch (no longer flicker, added bright mode to kernel, quick and dirty fix to widget size) and also fixed the battery indicator in low power mode (charging when off) P7310: Removed signal strength bars
2012-01-23b - Enabled CIFS, NTFS and TUN in kernel. Replaced sensors.p3.so with P7300 version.
2012-01-23 - Youtube HD now works. New proprietary libs from pershoots repo. Also modified pershoots P75xx kernel to work with P73xx so it is no longer using Motleys kernel (although several files was kanged from Motleys kernel to make pershoots kernel work on our devices). Now uses bootanimation.zip from Xoom ICS release (looks pretty much the same as before). CIFS, TUN and NTFS is not included in this release but will be added in the next one.
2012-01-11 - Resynced source, tweaked autobrightness, added Torch from CM7 (untested since my camera LED is broken)
2012-01-09 - Initial release
Known issues
Camera is not working.
Compass is 90 degrees wrong.
Rotation animation "blanks out" before it starts.
Voice calls (P7300 version) isn't working although some report recieving calls work while outgoing calls is a not.
HDMI output is rotated 90 degrees.
Sources
CyanogenMod9 source - https://github.com/CyanogenMod/
Kernel source: https://github.com/kalltkaffe/galaxy-2636
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Clockwork Recovery 6.0.0.8 - 2012-07-23 / 2012-07-25
Clockwork Recovery 6.0.1.2 - 2012-09-03
Downloads
Clockwork_Recovery_6.0.1.2_GT-P7300.zip
Clockwork_Recovery_6.0.1.2_GT-P7310.zip
EDIT 2012-09-05 - Links removed for now. Got stuck on formatting /cache and since then I'm APX bricked. Hopefully my tablet will recover after battery drain. At least one other user have ended up with the same problem. Not sure if it is something with the new kernel or just a coincidence but I recommend to reflash 6.0.0.8 for now.
Clockwork Recovery 6.0.0.8 - 2012-07-23 / 2012-07-25 (alternate)
Downloads
Clockwork_Recovery_6.0.0.8_GT-P7300.zip
Clockwork_Recovery_6.0.0.8_GT-P7300_alternate.zip
Clockwork_Recovery_6.0.0.8_GT-P7310.zip
Clockwork_Recovery_6.0.0.8_GT-P7310_alternate.zip
Use alternate version if you have display problems with the normal versions. The alternate versions uses an older kernel that works better on some devices.
Instructions
Everything is done at your own risk.
Flash from either stock recovery or another Clockwork recovery.
Thats great to see
Camera works?
Definitely the smoothest experience I've had on this tab; having tried Stock, Overcome and ICS Alpha 2.
Edit:
Camera and Video playback (Youtube, YouTubeHD, Netflix I'm assuming) are of course a no-no still at the moment.
SD Card Video playback has been no problem for me, save for a bit of stuttering on high profile MKV's, but that's the same on every rom.
Streaming Icefilms worked flawlessly, which leaves me happy.
All I want, a fix for the strange half a second Rotation stretching, HD video playback fixed, and ma camera! This would be the perfect rom.
The currently running widgets thing has the app photos rotated 90 degrees, and the screen streches for half a second when rotating.
Otherwise, I'm very happy to see that my tablet is capable of attaining speeds like. Absolutely flawless; what I would give to have a complete ICS rom. xD
Great to see another ICS pop up. I was getting random freezes with Alpha2 as well...I'm assuming its probably related to the kernel?
Sent from my Galaxy Nexus using Tapatalk
One annoyance however; no Market comes with the stock flash, and neither does a file explorer apparently. -___-
EDIT: Finally managed to get market installed, and it insta closes on start. =[
And then I realized its because I failed to remember to flash the Google Apps. -____- haha
Cool Race
Hi, presumably the reace between Alpha 2 team and CyanogenMod9 team is on...
will be interesting to see (and feel) the results once they become Beta...
Looking forward for the result of both teams !
Regards
Erik
P-7300
rosdol said:
Hi, presumably the reace between Alpha 2 team and CyanogenMod9 team is on...
Click to expand...
Click to collapse
I have no intention to start any competition. We both have the same goal, a stable and fully functional ICS for the Galaxy 8.9, and I believe sharing thoughts and ideas is the best way to achieve that goal.
And btw, I'm not a team, and while I am responsible for another CyanogenMod port (ZTE V9) this is not by any way yet an official CM9 port. Maybe it will be one day, maybe it won't.
kallt_kaffe said:
I have no intention to start any competition. We both have the same goal, a stable and fully functional ICS for the Galaxy 8.9, and I believe sharing thoughts and ideas is the best way to achieve that goal.
And btw, I'm not a team, and while I am responsible for another CyanogenMod port (ZTE V9) this is not by any way yet an official CM9 port. Maybe it will be one day, maybe it won't.
Click to expand...
Click to collapse
Adding to that the fact that this is, as the title says, based in CM9 whereas Galaxian Soup's ICS is no longer based in CM9, just AOSP. Both stances are great. The more the merrier I say! This community needs more ideas, more development and talented people like you, alterbridge86 and Team Galaxian Soup. For this, I thank you.
great rom.I like this rom(maybe batter than galaxy soup alpha2).It is smooth as other roms and fixed the auto bright level on the galaxy soup(it's important to me).thanks the good work.
This ROM is run is running real well for me....looking forward to future updates.
Sent from my GT-P7310 using Tapatalk
Thank you for an excellent alternative of the ICS.
Sent from my P7300 on CM9 Alpha1
New version in first post. Not much to be excited about though.
ehcan said:
Thank you for an excellent alternative of the ICS.
Sent from my P7300 on CM9 Alpha1
Click to expand...
Click to collapse
@ehcan
see your device is 7300
3g data work?
No voice functions
When this ROM gets the voice functions working, I'll try it again. Until then, I'm going back to Galaxian Alpha 2 where it all works perfectly.
Glenn
weltwon said:
When this ROM gets the voice functions working, I'll try it again. Until then, I'm going back to Galaxian Alpha 2 where it all works perfectly.
Click to expand...
Click to collapse
Have you tried their Gapps package? I believe that is what adds voice functionality.
chriscsh said:
@ehcan
see your device is 7300
3g data work?
Click to expand...
Click to collapse
No, the current kernel only supports wifi.
Sent from my GT-P7300
ehcan said:
No, the current kernel only supports wifi.
Sent from my GT-P7300
Click to expand...
Click to collapse
Actually we already have a kernel that supports 3G and has the needed ICS fixes, but it doesn't help, the CM9 ICS build has data disabled.
We (Galaxian-Soup) are working on making a ICS build that has data enabled.
poisike said:
Actually we already have a kernel that supports 3G and has the needed ICS fixes, but it doesn't help, the CM9 ICS build has data disabled.
We (Galaxian-Soup) are working on making a ICS build that has data enabled.
Click to expand...
Click to collapse
Here's a totatally untested P7300 version: update-cm-9.0.0-RC0-p5-KANG-signed-20120112.zip
May or may not work. Kernel compiled for P7300 and based on pershoots P7500 repo. Used the same proprietary files as in the P7310 version except for the ril lib.
Source: https://github.com/kalltkaffe/android_device_samsung_p5
Hi all,
some of you know me from the other OnePlus or Samsung devices areas, where I provide my kernels already for more than three years to OnePlus One, OnePlus Two, OnePlus X, Galaxy S5, S3 and Note 10.1 users for all sort of platforms (Samsung, Cyanogenmod, Omnirom etc.)
Now I own a OnePlus 3 device and decided to port my kernels also to this device.
Please note:
I am not heading to have as many features as possible implemented, this is not my design goal. If you are more into that, move on to other kernels. If you are searching for a good mix of improvements and new functions while not sacrificing stability, you are welcome here (see below the history section for more info).
Important notes
When using new anykernel concept Boeffla-Kernel: Flash stock kernel of rom first !
Make sure you flash the correct kernel version, depending on whether you really use CM or a different OS !!!
Also note: You have to use Boeffla-Config app which I provide on my homepage to tweak the kernel. 3rd party apps will not be able to unleash the full power of the kernel.
Compatibility
Important: This kernel is only meant to be compatible with official Cyanogenmod and nothing else.
So when the kernel does not run on custom rom XYZ, do not even bother me with it or ask hundred times in the thread for compatibility.
I could not care less about it !!
Installation
Read the install instructions in the support section on the Boeffla Site.
Support
First read the FAQ section on the Homepage !!!
Click here to learn about all possible kernel settings in the config app (quite outdated, as it is focused on S3 still).
Click here to learn about using the config app (quite outdated, as it is focused on S3 still).
I will refuse to give support if you do any undervolting/overclocking and experience freezes or hot reboots.
I will also not provide any support if you do not use Boeffla-Config app to tweak the kernel, other 3rd party tweaking apps are known (and intended) to cause issues.
I will refuse to give support if you have xposed framework installed and reporting any kind of weird issues. My opinion to xposed it quite clear: too powerful for >90% of the users that just mess up their system with it.
Otherwise, you can get in touch with me via the support e-mail address: [email protected]
Please provide kernel version, rom version, a detailed issue description and ideally supporting screenshots or log files.
Change logs
(you can also access them directly in Boeffla-Config V2 by pressing menu and selecting "change log...")
Change log for LineageOS 14.1 kernel - Click here
Change log for CM13 kernel - Click here
Features
Note: This kernel only runs on LineageOS for the OnePlus 3 - nothing else !!!
Support of anykernel concept (only latest kernels) - flash stock kernel before flashing Boeffla
Full integration with Boeffla-Config V2 (you need at least version 2.4.02 or higher !!!) configuration app (get it from http://www.boeffla.de) to configure all kernel settings
Dash charging fully supported
The two CPU clusters (big and little cpu) can be configured completely separate in terms of min/max frequencies, governors and CPU core profiles
Additional governors: Impulse, zzmoove, elementalx, conservative, ondemand, blu_active
Additional schedulers: fiops, bfq, sio, sioplus, fifo, vr, tripndroid, zen, maple
CPU overclocking - one additional overclocking step for both clusters (1,72 GHz for little CPU / 2,26 GHz for big CPU)
No GPU overclocking, no CPU and GPU voltage interface
USB charge rate bumped up to 900 mA
Boeffla charge analysis (display of charger type and charge current in Boeffla-Config app in real time)
CPU core profiles to restrict number of CPU cores being used (the OP3 does not hotplug based on load)
Boeffla-Sound engine: Headphone volume and speaker volume (only lowering volumes for speaker)
Dynamic FSync (activated if screen on, deactived if screen off), configurable
Input boost frequencies and duration configurable per CPU cluster, input boost switch
Show CPU frequency usage per CPU and frequency in Boeffla-Config
Show GPU frequency usage per frequency in Boeffla-Config
KCal V2 Color control
Display backlight limits configurable (to avoid display brightness gets too low in some situations)
Display backlight dimmer
Swipe2wake gestures
Swipe2sleep gestures
Boeffla generic wakelock blocker V1.1.0 (documentation)
SD card read ahead buffer configurable (default increased to 1024 kB)
Ext4 File system tweaks (default to on, can be disabled)
Kernel logger (dmesg) configurable
CIFS support (module, do not mount inside /data, if you rooted with Chainfire SuperSu, make sure you uncheck the namespace separation in SuperSu app)
NFS support (module)
NTFS support (module)
XBox support (module)
OTG-Ethernet support (module)
TCP Congestion changed to Westwood
Many additional TCP congestion algorithms available
Entropy values configurable
Hardware touch keys are locked as long as screen is in use (touched) for better usability
Swap supported
Various minor kernel tweaks
Doze mode configurable in Boeffla-Config
Full selinux strict support (switchable to permissive on demand)
Show speedbin information (PVS level) in Boeffla-Config app
init.d support (in /system/etc/init.d - set correct permissions!)
Automatic EFS backup
Integrated full busybox 1.24.2 (own compilation)
Kernel initialisation log file (with history of 3 log files)
Emergency reset script automatically placed into /boeffla-kernel-data folder of your internal memory
Google gcc 4.9 toolchain (64 bit) used for best stability
Always based on latest LineageOS kernel sources (http://github.com/LineageOS/android_kernel_oneplus_msm8996)
Download
For all information and downloads (stable AND testing versions), visit the Boeffla-Kernel homepage:
www.boeffla.de
History and design targets
Basically I created my first Boeffla-Kernel in 2012 as there was no kernel for the Samsung Galaxy S3 around that had exactly the mix of functionalities that I wanted. I wanted to have full flexibility in undervolting and charge rates for instance, but did not like the sharpness and/or brightness tweaks many kernels have implemented as per default.
Hence, I began to create my own kernel after a while, adding all the features I like. This is the result of my work, which in the end I decided to share with you. I hope you like it as much as I do.
The objective of this kernel is to have a kernel for daily use. It does not aim for best battery life, or best smoothness or best benchmark scores. Also it does not aim to have the broadest feature set available everywhere.
It aims more for a good mix of all, not sacrificing stability and functionality in the end.
And - most important: It aims to stay quite close to stock !!!
These design targets are also valid for the OnePlus kernel here!!!
This said, I will definitely NEVER implement:
things I do personally not need
things I do not like
things that are in any way dangerous
anything which is highly experimental
custom hotplugging algorithms
a CAF based kernel
anything that requires upstreaming of kernel parts to a higher kernel major version
So do not even ask for it if it falls into the listed categories. Everything else I am happy to check and decide.
And: I do not really care about benchmark numbers, they say almost nothing as long as something is not completely wrong. Important for me is the feel-good factor.
I am also not interested in gaming at all, so never expect a gamer kernel. It will just not happen...
Compatibility
To reiterate it again: Flash the correct kernel depending on whether you are using Lineage/CM or another rom !!!
Configuration of the kernel
To tweak and configure the kernel, manually load and install the app "Boeffla-Config V2" from the downloads section on www.boeffla.de.
You need at least version 2.4.02 or higher for the OnePlus 3 Boeffla Kernels.
Donation
If you like my work, feel free to donate: Donation-Link
If you donate at least 2,49 EUR (to be in line with the donation app prices on Google Play store), you will receive a personal donation code which unlocks some nice little comfort functions in Boeffla-Config V2 on top.
Source code
All sources can be found in my Github repository: http://github.com/andip71
Credits to developers
Of course, I had never been able to create all that by my own. So I want to give credits to the really good developers around, that have given me all the inspiration and from which I cherry picked lots of the implemented functionalities:
* ZaneZam
* Grarak
* Yank555
* Hardcore
* Chainfire
* AndreiLux
* Netarchy
* Gokhanmoral
* Simone201
* Mialwe
* Entropy512
* Faux
* Harunjo
* FranciscoFranco
* Ak
* Osm0sis
... I just hope I did not forget someone. If so, please let me know and I will add you of course.
Thanks to all of you for your great work !!!
Disclaimer
*** As always - Flash on our own risk! ***
Make sure you flash the correct version depending on your firmware version!
I can and will not take any responsibility for bricked phones or lost data.
It is generally recommended to run a complete Nandroid backup in your custom recovery and safely store your personal data before you flash a new kernel.
Cheers and enjoy
Andi
Latest change log:
LineageOS 14.1:
http://kernel.boeffla.de/oneplus3/boeffla-kernel-cm/cm14.0/changelog.htm
CM13:
http://kernel.boeffla.de/oneplus3/boeffla-kernel-cm/cm13.0/changelog.htm
Configuration and profile thread
http://forum.xda-developers.com/oneplus-3/how-to/profiles-boeffla-kernel-profiles-t3455503
*** You want my support? Then stick to my rules ***
Guys, I am receiving more and more completely useless support requests in different threads. Useless because people provide nothing to be able to help, not even the minimal possible information they could give.
Hence, I will now remind anyone again on the support guide lines stated here:
http://boeffla.de/index.php/support/support
Also you need to ensure you follow the installation guide lines incl. trouble-shooting stated here:
http://boeffla.de/index.php/support/installation-how-to
And to cut a long story short: If you do not at least provide what I request in the support guide lines, I will IGNORE YOUR REQUESTS IN FUTURE.
Straight and simple. I have enough of people wasting my time just because they are too lazy to write details.
Period.
Also as a reminder:
you use xposed? -> no support, everything is your own issue
you use a custom rom and not the official stock or CM one? -> good luck, you are on your own
you undervolt or overclock? -> have fun, but without my support
Sorry, this might sound harsh (and it is meant to sound harsh), but you cannot imagine about how crappy support requests can be. Stating something does not work is just not enough.
Please consider that!!!
Andi
OH MY GOD!
Grüße aus Potsdam
Allright folks, thread is open. Kernel is available for download.
Before you start, please make sure you read the following information at least:
http://boeffla.de/index.php/support/installation-how-to
http://boeffla.de/index.php/support/support
If you have trouble, I ask you to also scan for your issue in the OnePlus 2 thread, as major parts are the same on both devices (http://forum.xda-developers.com/one...rnel-boeffla-kernel-5-0-alpha8-11-04-t3357167)
Enjoy
Andi
Thank you Lord for bringing Christmas to us!
yay downloading, gonna flash direct and test thank u sir
@Lord Boeffla Confirmation number: 8EE21419AG5941220
Thank you Lord Boefla for this awesomeness!!!
Oh yes. The old master is here.
Waiting for CM snapshot bugfixes and then it's gonna roll.
can't wait to get my op3
AWESEOME THANKS FLASHED IT ON Ressurection Remix rom and its working awesome
Awesome!!! I'm really happy to see Boeffla Kernel on OP3. I used his kernel on my S5, but recently I got my OP3. I tried to install this kernel on CM13 by arter97 but it failed in recovery (Error 1......). Any ideas?
xantic21 said:
Awesome!!! I'm really happy to see Boeffla Kernel on OP3. I used his kernel on my S5, but recently I got my OP3. I tried to install this kernel on CM13 by arter97 but it failed in recovery (Error 1......). Any ideas?
Click to expand...
Click to collapse
Use official CM13.
Also, read that we need at least some more information:
http://boeffla.de/index.php/support/support
How should we help without knowing where what went wrong...
Andi
Flashed on blackjubel RR and booted
Thank you
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my ONEPLUS A3003 using Tapatalk
Lord Boeffla said:
Use official CM13.
Also, read that we need at least some more information:
http://boeffla.de/index.php/support/support
How should we help without knowing where what went wrong...
Andi
Click to expand...
Click to collapse
Thanks Andi for your answer. I thought CM13 by arter97 is really close to official CM13
is it possible to revert the cm13 stock kernel back if something goes wrong or i want to change my mind ?
btw. i got cm13 snapshot installed
Playa82 said:
is it possible to revert the cm13 stock kernel back if something goes wrong or i want to change my mind ?
btw. i got cm13 snapshot installed
Click to expand...
Click to collapse
Yes, dirty flash CM13 again and you are back to stock kernel.
Andi
Playa82 said:
is it possible to revert the cm13 stock kernel back if something goes wrong or i want to change my mind ?
btw. i got cm13 snapshot installed
Click to expand...
Click to collapse
Take a back up ot the boot image in recovery and you're ready.
Lord Boeffla said:
Yes, dirty flash CM13 again and you are back to stock kernel.
Andi
Click to expand...
Click to collapse
ok cool. thx for your info
Working fine on latest oos.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi all,
this is the thread for a custom kernel i made for Samsung Galaxy A10.
The custom kernel has been named Eureka which is a greek work which means "I have found the solution". This multi-purpose kernel is the solution for battery, gaming, performance on our cheap A10. On creating this kernel, I believed that 1 kernel can be all of the above if properly tweaked!
As from Eureka R9.0, four kernel variants are available inside 1 same zip. This has been made possible using AROMA Installer.
Compatibility:
This kernel is compatible with AOSP GSIs/ROMs, OneUI2 and OneUI3. As from R9.0, there is only 2 variants of zip to download. One is called EMS and the other one is called HMP. Continue reading to learn more about them.
FEATURES:
* Disabled Samsung security features
* Enabled all governors + added other governors
* Overclocked CPU as follows:
BIG Cores: from 1560 MHz to 2288 MHz.LIL Cores: from 1352 MHz to 1794 MHz.* Underclocked CPU as follows:
BIG Cores: from 936 MHz to 208 MHz.LIL Cores: from 839 MHz to 208 MHz.* Added GPU thermal and voltage control
* Added latest boeffla wl blocker V 1.1.0 and disabled some wakelocks
* Network speed improvement
* Enable zram support and set default compressor as zstd.
* Switch to a lower charging voltage more quickly.
* GPU max frequency overclocked from 676 MHz to 1300 MHz
* Implemented Dynamic FSync 2.0
* Implemented a custom hotplug driver to enhance battery management
* Implemented Power Suspend driver
* High torch brightness on custom roms/gsis
* Has Spectrum support
* Automatic detection of magisk - If u are rooted, u don't need to flash magisk after kernel.
* Upstreamed kernel version from 4.4.177 to 4.4.302
* Built with Vortex Clang 14 toolchain with LTO. Reason: Better performance
* Support for EMS (Exynos Mobile Scheduler) added
Please read the changelog on github for full list of changes.
KNOWN ISSUES:
* Maybe ADB cannot be used at the same time as MTP
SOME MINOR TWEAKS FOR BEST GPU PERFORMANCE:
* Set GPU power policy to "always on"
* Set min and max GPU frequency to 1200/1300 MHz
* Disable GPU thermal manager to prevent GPU frequency from dropping
* Games don't require high CPU frequency because they depend more on GPU. You can therefore decrease CPU max frequencies to reduce heating of the device.
We have developed our own kernel manager called EKManager which is a fork of HkTweaks. It is compatible only with Eureka Kernels. You can download it from here:
LINK: Download EKManager app
Contact info:
Developers of Eureka Team:
* Telegram: @Chatur27, @Gabriel260BR and @roynatech
Channel for Eureka future updates:
* Telegram: https://t.me/eureka_kernel
Official discussion group for A10:
* Telegram: https://t.me/a10grp
I'm grateful to KineSight for designing the logo.
* Telegram: @Kinesight
Reference about EMS kernel:
Energy Aware Scheduling (EAS) gives the scheduler the ability to predict the impact of its decisions on the energy consumed by CPUs. EAS relies on an Energy Model (EM) of the CPUs to select an energy efficient CPU for each task. Allowing to save up battery even further. EMS aka Exynos Mobile Scheduler, is a fork of EAS for Exynos. We ported to our 4.4.y kernel. As written above, EMS kernel is good for battery saving. Some words from kernel official docs: - EAS operates only on heterogeneous CPU topologies (such as Arm big.LITTLE) because this is where the potential for saving energy through scheduling is the highest.
EMS kernel + pwrutilx governor is very good at battery saving according to our test.
Reference about HMP kernel:
It's just the stock scheduler that comes with stock kernel. Basically it's the normal kernel.
What kernel variant to flash once inside AROMA installer?
1) AOSP Legacy Q/R/S - If you are using an old Eureka ROM which was released before February 2022, choose this.
2) AOSP Q/R/S (New) - If you are using an Eureka ROM built as from February 2022, choose this.
3) OneUI 2 - For any OneUI 2 roms (stock/ports).
4) OneUI 3 - For any OneUI 3 roms (stock/ports).
Download link for A10 (Read above to know which version to download for your OS):
All releases of Eureka for Q/R/S ROMs/GSIs (including OneUI)
Source code for my kernel:
Kernel source on GitHub
If you love our work, thank us by donating. Your donation can help us rent a cloud sever to build kernels and roms faster
Link to PayPal: https://www.paypal.com/paypalme/chaturbaij
Noice :victory:
Primeaqua02 said:
Noice :victory:
Click to expand...
Click to collapse
Please vote for the poll at the top of the thread.
Will be great to have your feedbacks.
Thank you.
Does this work with Ultimate Q Rom?
keihjesus said:
Does this work with Ultimate Q Rom?
Click to expand...
Click to collapse
It works. Went on to try it out.
Good afternoon, everyone, I want to leave a review for EUREKA KERNEL 4.4.3, the update hasn't really changed anything, but the work of the RAM memory is different, applications often crash out of the RAM memory, , with update 4.4.3 I can use only 1 application, the rest crashes within a minute, I solved the problem by rolling back to version 4.4, Please fix the RAM, thanks a lot.
Zloemoloko1998 said:
Good afternoon, everyone, I want to leave a review for EUREKA KERNEL 4.4.3, the update hasn't really changed anything, but the work of the RAM memory is different, applications often crash out of the RAM memory, , with update 4.4.3 I can use only 1 application, the rest crashes within a minute, I solved the problem by rolling back to version 4.4, Please fix the RAM, thanks a lot.
Click to expand...
Click to collapse
Well, I didn't do anything with ram.
Kindly let me know which os you are using
Zloemoloko1998 said:
Good afternoon, everyone, I want to leave a review for EUREKA KERNEL 4.4.3, the update hasn't really changed anything, but the work of the RAM memory is different, applications often crash out of the RAM memory, , with update 4.4.3 I can use only 1 application, the rest crashes within a minute, I solved the problem by rolling back to version 4.4, Please fix the RAM, thanks a lot.
Click to expand...
Click to collapse
use ex kernel manager and enable zswap
Chatur27 said:
Well, I didn't do anything with ram.
Kindly let me know which os you are using
Click to expand...
Click to collapse
i use stock Android 10 Q one ui 2.0
Zloemoloko1998 said:
i use stock Android 10 Q one ui 2.0
Click to expand...
Click to collapse
I use ultimateQ ( which a debloated version of oneui 2.0) and I don't get any such issues.
I don't even need to enable zswap (except for high end games)
Is there any way to increase multi touch count/slots to 10 !
Update: I got stuck at samsung logo
Update 2 : magisk cause bootloop and to avoid that you should remove magisk from inside "Eureka_kernel/ramdisk" folder then flash it via recovery, it should work just fine..
Eureka kernel brings HUGE improvement in performance and gaming.
thank you @Chatur27 for the awesome support and for this awesome kernel.
Device : A105f 2GB ram version
D R A G O said:
Is there any way to increase multi touch count/slots to 10 !
Update: I got stuck at samsung logo
Device : A105f 2GB ram version
Click to expand...
Click to collapse
Force restart device. It will boot up normally.
dead link
blackisme said:
dead link
Click to expand...
Click to collapse
Hi, sorry about this.
Use this temporary link for the time being:
Galaxy A10 Kernel - Google Drive
drive.google.com
Thank you
Links doesn't work... Help :c
What's the difference between enforcing and permissive kernel?
Chatur27 said:
I use ultimateQ ( which a debloated version of oneui 2.0) and I don't get any such issues.
I don't even need to enable zswap (except for high end games)
Click to expand...
Click to collapse
Does it support volte? I have tried to install the selinux enforcing version but it won't boot up the permissive one is working fine but is there a way to change it to enforcing manually? And also(this is the last) did you flash the one ui version for ultimateq since it's a debloated stock?
Your kernal is doing awesome ....great job..keep up the good work.
AlexDreemurr said:
Links doesn't work... Help :c
Click to expand...
Click to collapse
Hi, sorry about this.
Use this temporary link for the time being:
Galaxy A10 Kernel - Google Drive
drive.google.com
Eshan786 said:
Does it support volte? I have tried to install the selinux enforcing version but it won't boot up the permissive one is working fine but is there a way to change it to enforcing manually? And also(this is the last) did you flash the one ui version for ultimateq since it's a debloated stock?
Your kernal is doing awesome ....great job..keep up the good work.
Click to expand...
Click to collapse
Volte is oneui rom feature. dont ask me about volte. Ty.
Enforcing version won't boot because your custom rom needs permissive. Change rom if you want enforcing SElinux
I flashed the 5.0 version (Permissive and Enforcing) but it won't boot... RR Q, only works the 4.4.1... Why? :S