Dear forum members,
In the following A, B, C and D sections is described the flashing process
of the NON NoDo unbranded ROM: RUU_Schubert_Cingular_US_1.54.531.02_Radio_5.66.09.09a_22.46.50.21U_Signed_by_ansar
It is suitable for chevronWP7 unlock and can be upgraded to 7008 and then to 7392 NoDo OS and keep unlocking
See my relevant thread: [Guide How To]Pass ChevronWP7 Unlocker from 7004 to 7392 NoDo via zune, by ansar
A. Pre-Requisites
If your HD 7 is flashed with a ROM of the following release:
1. RUU_Schubert_Cingular_US_3.03.502.02_Radio_5.66.09.09a_22.46.50.21U
then you can flash the following NON NoDo unbranded ROM and when you like you can comeback to your previous NoDo ROM
In case your HD 7 is flashed with a different of the above 1 ROM but your Firmware version at your phone settings>about>more information
is of the form xxxx.yy.zzzzz.502 i.e. with characteristic value 502
then you can also flash the following NON NoDo unbranded ROM, but you can comeback only to the above 1 ROM
B. Downloading
You must download the following 2 ROMs:
1. Download this zip ROM file: RUU_Schubert_Cingular_US_1.54.531.02_Radio_5.66.09.09a_22.46.50.21U_by_ansar
2. Download this zip ROM file: RUU_Schubert_Cingular_US_1.54.531.02_Radio_5.66.09.09a_22.46.50.21U_Signed_by_ansar
Extract the downloaded zip ROM files with an unzip / 7zip utility in separate folders of your choice
C. Flashing Process
In order to successfully flash the provided ROMs you must follow these steps:
1. Flash the ROM of the above (B.1.) extracted zip ROM file
2. After flashing HD 7 will automatically enter again in bootloader mode
3. In the screen of your computer the ROMUpdateUtility will report an ERROR[270]
4. Ignore it and exit from ROMUpdateUtility
5. Now flash the ROM of the above (B.2.) extracted zip ROM file
6. After flashing your HD 7 will boot normally
7. Exit from ROMUpdateUtility and proceed with your brand new ROM
If you do not want them you can delete all operator apps, in order to have more free RAM
Beware, in WP7 deleting an application means it is deleted from ROM
D. ROM Flashing Instructions
In order to flash a ROM follow these steps:
1. Press and hold power-on/off button to power-off the phone
2. Press and hold volume-down button and then press power-on/off button to enter bootloader mode
3. When your phone enters the tricolor screen bootloader mode, release volume-down button
4. Connect your phone to your windows 7/vista pc/laptop with a usb cable
5. Verify that your phone will be identified and relevant drivers will be installed by windows os of your pc/laptop
6. After completion of (D.5.) above, check the usb message connection on your phone screen
7. To flash the ROM go to your pc/laptop folder where the downloaded zip ROM file is extracted
8. Double click on the ROMUpdateUtility.exe file and strictly follow the instructions on your pc/laptop screen
Till next version enjoy!!!
Regards, ansar
Thank you, ansar.
Would you like to create a non-NoDo Europe ROM with latest radio? So ppl can unlock and then update to NoDo with latest radion.
hoaisonongame said:
Thank you, ansar.
Would you like to create a non-NoDo Europe ROM with latest radio? So ppl can unlock and then update to NoDo with latest radion.
Click to expand...
Click to collapse
Hi,
Not yet, but maybe will be possible, we will see ...
Thnx for commenting and supporting!!
Regards, ansar
bro
Thank you, ansar.
Bro_toyota said:
Thank you, ansar.
Click to expand...
Click to collapse
Hi,
Thnx for supporting!!
Regards, ansar
Hi, i can't update... it stays on 0% and then it shows me Error 260 which is Comm Error... but the usb is fine, and i tried in the 3 usb ports of my pc... so, what could it be?? thanks.
ERROR [260] : CONNECTION
This error occurs when there is an “open port error” before upgrading the CE ROM image.
Solution: You can reset the device and run RUU again. If you still encounter an “OPEN PORT ERROR” again, reset your computer and try again.
EDIT: Now it shows error 262...
ERROR [262, 276, 284, 302] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
i upgraded it to 7392... does it have to do something with it??
ZeroCool11 said:
Hi, i can't update... it stays on 0% and then it shows me Error 260 which is Comm Error... but the usb is fine, and i tried in the 3 usb ports of my pc... so, what could it be?? thanks.
ERROR [260] : CONNECTION
This error occurs when there is an “open port error” before upgrading the CE ROM image.
Solution: You can reset the device and run RUU again. If you still encounter an “OPEN PORT ERROR” again, reset your computer and try again.
EDIT: Now it shows error 262...
ERROR [262, 276, 284, 302] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
i upgraded it to 7392... does it have to do something with it??
Click to expand...
Click to collapse
Hi,
Do you start from tricolor screen in bootloader?
Regards, ansar
Thank you for this rom, great work!
For anyone wondering, if you have the HD7 S with AT&T, flash this rom, chevron unlock your phone, apply registry hack to keep phone unlocked, then update through zune to get back to NoDo
Related
step-by-step
http://forum.xda-developers.com/showthread.php?t=893948
I can't flash MAGLDR113. 0%.
Right now i'm going to do task29 and flash RADIO 2.15.50.14 second time.
Next :
What version of rillphone.dll do i have to use for this RADIO ?
task29
Task 29 the same. 0%. My ROM : Duttys latest
EDIT : One question. HSPL 2.08.0000 or HSPL 2.08.HSPL ?
wrong place to post a question
take a look at the faq for troubleshooting:
http://forum.xda-developers.com/showpost.php?p=10206031&postcount=2
mskip said:
-----------------------------------------------------
When flashing MAGLDR the status remains at 0% for a long time, then gives a USB connection error
You need 2.08.HSPL installed in order to flash Magldr. Use HSPL3.exe and the Steps in *THIS* thread to do that.
-----------------------------------------------------
Click to expand...
Click to collapse
Help.
I can't flash anything. Task 29, latest HTC rom, radio ! Anything !
Please help !
EDIT : ERROR 262
BornToSowDeath said:
I can't flash anything. Task 29, latest HTC rom, radio ! Anything !
Please help !
EDIT : ERROR 262
Click to expand...
Click to collapse
its not too serious
steps to try:
-different usb port
or
-reinstalling ActiveSync
or
-if its still not working reboot your pc/laptop & start again.
Reboot done. Now Uninstalling ActiveSync and trying other USB port. Thanks.
Same as previous ones. 0%
the prev post was just to sort out the error,
as for the 0% its a known issue, follow the guides in the faq, everything you need is in there, (not to sound harsh) but no point really in typing it out again.
good luck
I really need to format my PC ;D Flashing task29 and RADIO done. ****ty programs (AtiTrayTools etc.) were the problems.
Error ;<
Error happen
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
2. FLASH YOUR ANDROID ROM
The Original NAND Android Thread by Cotulla is *HERE*
NOTE1: This section is only applicable AFTER you have flashed MAGLDR to your Device
NOTE2: Make sure your phone is still connected via usb cable before starting
* When your phone Reboots it will Enter the MAGLDR Boot Menu Screen *
1. Press the 'Volume Down' button to goto Option 5: USB Flasher and press the 'Call' button (far left of the 5 hardware buttons at the bottom)
2. The menu will enter Android Flasher mode and install usb drivers if not present
3. Browse to the folder you extracted your NAND Android Package files to on your pc, right click on Run DAF.exe (or Install.exe if DAF.exe isnt present) and select Run as Administrator
4. Read ALL the text and then select 'Next'
5. Read the information and select 'Next'
6. The installer will now detect USB and then flash your Android Rom to NAND
* You can follow this progress on your Phones Screen *
7. When flashing is complete your phone will Reboot and proceed to boot Android from NAND
Error appears after/in point 3. (Installer is scanning for Leo). Help.
EDIT : Ok. I installed CleanDROID. Thanks.
BornToSowDeath said:
Error ;<
Error happen
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
2. FLASH YOUR ANDROID ROM
The Original NAND Android Thread by Cotulla is *HERE*
NOTE1: This section is only applicable AFTER you have flashed MAGLDR to your Device
NOTE2: Make sure your phone is still connected via usb cable before starting
* When your phone Reboots it will Enter the MAGLDR Boot Menu Screen *
1. Press the 'Volume Down' button to goto Option 5: USB Flasher and press the 'Call' button (far left of the 5 hardware buttons at the bottom)
2. The menu will enter Android Flasher mode and install usb drivers if not present
3. Browse to the folder you extracted your NAND Android Package files to on your pc, right click on Run DAF.exe (or Install.exe if DAF.exe isnt present) and select Run as Administrator
4. Read ALL the text and then select 'Next'
5. Read the information and select 'Next'
6. The installer will now detect USB and then flash your Android Rom to NAND
* You can follow this progress on your Phones Screen *
7. When flashing is complete your phone will Reboot and proceed to boot Android from NAND
Error appears after/in point 3. (Installer is scanning for Leo). Help.
Click to expand...
Click to collapse
There are two things you need to learn on the internet:
Reading and Searching, no offense but you don't seem to be able to do either very well. Run the flasher under admin privileges
HSPL 2.08 is a must! then you should have a 576 MB ram radio. 2.08.50 will do it (task29).
then flash magldr. good to go
Dear forum members,
In the following A, B, C and D sections is described the flashing process
of the NoDo unbranded ROM: RUU_Schubert_BellMobility_WWE_1.68.206.03_Radio_5.63.09.13_3a_22.36.50.15U_NoDo
A. Pre-Requisites
If your HD 7 is flashed with a ROM of the following release:
1. RUU_Schubert_BellMobility_WWE_2.16.666.02_Radio_5.64.09.11a_22.40.50.15U
then you can flash the following NoDo unbranded ROM and when you like you can comeback to your previous ROM
In case your HD 7 is flashed with a different of the above (1) ROM but your Firmware version at your phone settings>about>more information
is of the form xxxx.yy.zzzzz.666 i.e. with characteristic value 666
then you can also flash the following NoDo unbranded ROM, but you can comeback only to one of the above (1) ROM
B. Downloading
You must download the following 2 ROMs:
1. Download this zip ROM file: RUU_Schubert_BellMobility_WWE_1.68.206.03_Radio_5.63.09.13_3a_22.36.50.15U_NoDo_by_ansar
2. Download this zip ROM file: RUU_Schubert_BellMobility_WWE_1.68.206.03_Radio_5.63.09.13_3a_22.36.50.15U_NoDo_Signed_by_ansar
Extract the downloaded zip ROM files with an unzip / 7zip utility in separate folders of your choice
C. Flashing Process
In order to successfully flash the provided ROMs you must follow these steps:
1. Flash the ROM of the above (B.1.) extracted zip ROM file
2. After flashing HD 7 will automatically enter again in bootloader mode
3. In the screen of your computer the ROMUpdateUtility will report an ERROR[270]
4. Ignore it and exit from ROMUpdateUtility
5. Now flash the ROM of the above (B.2.) extracted zip ROM file
6. After flashing your HD 7 will boot normally
7. Exit from ROMUpdateUtility and proceed with your brand new ROM
If you do not want them you can delete all operator apps, in order to have more free RAM
Beware, in WP7 deleting an application means it is deleted from ROM
D. ROM Flashing Instructions
In order to flash a ROM follow these steps:
1. Press and hold power-on/off button to power-off the phone
2. Press and hold volume-down button and then press power-on/off button to enter bootloader mode
3. When your phone enters the tricolor screen bootloader mode, release volume-down button
4. Connect your phone to your windows 7/vista/xp pc/laptop with a usb cable
5. Verify that your phone will be identified and relevant drivers will be installed by windows os of your pc/laptop
6. After completion of (D.5.) above, check the usb message connection on your phone screen
7. To flash the ROM go to your pc/laptop folder where the downloaded zip ROM file is extracted
8. Double click on the ROMUpdateUtility.exe file and strictly follow the instructions on your pc/laptop screen
Till next version enjoy!!!
Regards, ansar
Hey ansar what's the difference between this one and the previous Bell/Telstra one you had posted? Thanks!
the-wrangler said:
Hey ansar what's the difference between this one and the previous Bell/Telstra one you had posted? Thanks!
Click to expand...
Click to collapse
Hi,
This is a NoDo ROM for BellMobility but from 206 i.e. O2_UK, see title
Regards, ansar
Dear forum members,
In the following A, B, C and D sections is described the flashing process
of the NoDo unbranded ROM: RUU_Mozart_TMO_CZ_1.30.401.01_Radio_5.54.09.21_22.33b.50U_NoDo
A. Pre-Requisites
If your Mozart is flashed with a ROM of the following releases:
1. RUU_Mozart_TMO_CZ_1.23.113.01_Radio_5.50.09.18_22.24.50.09U
2. RUU_Mozart_TMO_CZ_1.27.113.02_Radio_5.51.09.29_22.32.50.09U
then you can flash the following NoDo unbranded ROM and when you like you can comeback to your previous ROM
In case your Mozart is flashed with a different of the above 1, 2 ROMs but your Firmware version at your phone settings>about>more information
is of the form xxxx.yy.zzzzz.113 i.e. with characteristic value 113
then you can also flash the following NoDo unbranded ROM, but you can comeback only to one of the above 1, 2 ROMs
B. Downloading
You must download the following 2 ROMs:
1. Download this zip ROM file: RUU_Mozart_TMO_CZ_1.30.401.01_Radio_5.54.09.21_22.33b.50U_NoDo_by_ansar
2. Download this zip ROM file: RUU_Mozart_TMO_CZ_1.30.401.01_Radio_5.54.09.21_22.33b.50U_NoDo_Signed_by_ansar
Extract the downloaded zip ROM files with an unzip / 7zip utility in separate folders of your choice
C. Flashing Process
In order to successfully flash the provided ROMs you must follow these steps:
1. Flash the ROM of the above (B.1.) extracted zip ROM file
2. After flashing Mozart will automatically enter again in bootloader mode
3. In the screen of your computer the ROMUpdateUtility will report an ERROR[270]
4. Ignore it and exit from ROMUpdateUtility
5. Now flash the ROM of the above (B.2.) extracted zip ROM file
6. After flashing your Mozart will boot normally
7. Exit from ROMUpdateUtility and proceed with your brand new ROM
If you do not want them you can delete all operator apps, in order to have more free RAM
Beware, in WP7 deleting an application means it is deleted from ROM
D. ROM Flashing Instructions
In order to flash a ROM follow these steps:
1. Press and hold power-on/off button to power-off the phone
2. Press and hold volume-down button and then press power-on/off button to enter bootloader mode
3. When your phone enters the tricolor screen bootloader mode, release volume-down button
4. Connect your phone to your windows 7/vista/xp pc/laptop with a usb cable
5. Verify that your phone will be identified and relevant drivers will be installed by windows os of your pc/laptop
6. After completion of (D.5.) above, check the usb message connection on your phone screen
7. To flash the ROM go to your pc/laptop folder where the downloaded zip ROM file is extracted
8. Double click on the ROMUpdateUtility.exe file and strictly follow the instructions on your pc/laptop screen
Till next version enjoy!!!
Regards, ansar
dead links
hello, links to ROMs are dead...please can you re-upload them? thx
lukas26 said:
hello, links to ROMs are dead...please can you re-upload them? thx
Click to expand...
Click to collapse
Hi,
I did recover of network maintenance, pros and will try to fix it
Regards, ansar
Dear forum members,
In the following A, B, C and D sections is described the flashing process
of the NoDo unbranded ROM: RUU_Schubert_TIM_IT_1.69.401.01_Radio_5.54.09.21_22.33b.50.10U_NoDo
A. Pre-Requisites
If your HD 7 is flashed with a ROM of the following release:
1. RUU_Schubert_TIM_IT_1.64.901.03_Radio_5.63.09.13_3a_22.36.50.15U
then you can flash the following NoDo unbranded ROM and when you like you can comeback to your previous ROM
In case your HD 7 is flashed with a different of the above 1 ROM but your Firmware version at your phone settings>about>more information
is of the form xxxx.yy.zzzzz.901 i.e. with characteristic value 901
then you can also flash the following NoDo unbranded ROM, but you can comeback only to the above 1 ROM
B. Downloading
You must download the following 2 ROMs:
1. Download this zip ROM file: Uploading ...
2. Download this zip ROM file: Uploading ...
Extract the downloaded zip ROM files with an unzip / 7zip utility in separate folders of your choice
C. Flashing Process
In order to successfully flash the provided ROMs you must follow these steps:
1. Flash the ROM of the above (B.1.) extracted zip ROM file
2. After flashing HD 7 will automatically enter again in bootloader mode
3. In the screen of your computer the ROMUpdateUtility will report an ERROR[270]
4. Ignore it and exit from ROMUpdateUtility
5. Now flash the ROM of the above (B.2.) extracted zip ROM file
6. After flashing your HD 7 will boot normally
7. Exit from ROMUpdateUtility and proceed with your brand new ROM
If you do not want them you can delete all operator apps, in order to have more free RAM
Beware, in WP7 deleting an application means it is deleted from ROM
D. ROM Flashing Instructions
In order to flash a ROM follow these steps:
1. Press and hold power-on/off button to power-off the phone
2. Press and hold volume-down button and then press power-on/off button to enter bootloader mode
3. When your phone enters the tricolor screen bootloader mode, release volume-down button
4. Connect your phone to your windows 7/vista/xp pc/laptop with a usb cable
5. Verify that your phone will be identified and relevant drivers will be installed by windows os of your pc/laptop
6. After completion of (D.5.) above, check the usb message connection on your phone screen
7. To flash the ROM go to your pc/laptop folder where the downloaded zip ROM file is extracted
8. Double click on the ROMUpdateUtility.exe file and strictly follow the instructions on your pc/laptop screen
Till next version enjoy!!!
Regards, ansar
Dear forum members,
This is a Cingular_US ROM for BellMobility that, except a 7390 platform build, is including the following apps:
- AT&T FamilyMap
- AT&T myWireless
- AT&T Navigator
- AT&T Radio and
- AT&T U-verse Mobile
Here are some more improvements:
- A newer ROM Radio and
- Speach recognition over the network
So if one is or will be in US with a BellMobility branded device can benefit of by unbranding to this one
As an option an AT&T SIM card can be used to get all privileges
AT&T does not yet provide an update to 7392 NoDo
Finally beware that this ROM supports English and Spanich only
In the following A, B, C and D sections is described the flashing process
of the NoDo unbranded ROM: RUU_Schubert_BellMobility_WWE_3.03.502.04_Radio_5.66.09.09a_22.46.50.21U_NoDo
A. Pre-Requisites
If your HD 7 is flashed with a ROM of the following releases:
1. RUU_Schubert_BellMobility_WWE_2.16.666.02_Radio_5.64.09.11a_22.40.50.15U
then you can flash the following NoDo unbranded ROM and when you like you can comeback to your previous ROM
In case your HD 7 is flashed with a different of the above (1) ROM but your Firmware version at your phone settings>about>more information
is of the form xxxx.yy.zzzzz.666 i.e. with characteristic value 666
then you can also flash the following NoDo unbranded ROM, but you can comeback only to one of the above (1) ROM
B. Downloading
You must download the following 2 ROMs:
1. Download this zip ROM file: RUU_Schubert_BellMobility_WWE_3.03.502.04_Radio_5.66.09.09a_22.46.50.21U_NoDo_by_ansar
2. Download this zip ROM file: RUU_Schubert_BellMobility_WWE_3.03.502.04_Radio_5.66.09.09a_22.46.50.21U_NoDo_Signed_by_ansar
Extract the downloaded zip ROM files with an unzip / 7zip utility in separate folders of your choice
C. Flashing Process
In order to successfully flash the provided ROMs you must follow these steps:
1. Flash the ROM of the above (B.1.) extracted zip ROM file
2. After flashing HD 7 will automatically enter again in bootloader mode
3. In the screen of your computer the ROMUpdateUtility will report an ERROR[270]
4. Ignore it and exit from ROMUpdateUtility
5. Now flash the ROM of the above (B.2.) extracted zip ROM file
6. After flashing your HD 7 will boot normally
7. Exit from ROMUpdateUtility and proceed with your brand new ROM
If you do not want them you can delete all operator apps, in order to have more free RAM
Beware, in WP7 deleting an application means it is deleted from ROM
D. ROM Flashing Instructions
In order to flash a ROM follow these steps:
1. Press and hold power-on/off button to power-off the phone
2. Press and hold volume-down button and then press power-on/off button to enter bootloader mode
3. When your phone enters the tricolor screen bootloader mode, release volume-down button
4. Connect your phone to your windows 7/vista/xp pc/laptop with a usb cable
5. Verify that your phone will be identified and relevant drivers will be installed by windows os of your pc/laptop
6. After completion of (D.5.) above, check the usb message connection on your phone screen
7. To flash the ROM go to your pc/laptop folder where the downloaded zip ROM file is extracted
8. Double click on the ROMUpdateUtility.exe file and strictly follow the instructions on your pc/laptop screen
Till next version enjoy!!!
Regards, ansar