Dear forum members,
In the following A, B, C and D sections is described the flashing process
of the NoDo unbranded ROM: RUU_Schubert_TIM_IT_1.69.401.01_Radio_5.54.09.21_22.33b.50.10U_NoDo
A. Pre-Requisites
If your HD 7 is flashed with a ROM of the following release:
1. RUU_Schubert_TIM_IT_1.64.901.03_Radio_5.63.09.13_3a_22.36.50.15U
then you can flash the following NoDo unbranded ROM and when you like you can comeback to your previous ROM
In case your HD 7 is flashed with a different of the above 1 ROM but your Firmware version at your phone settings>about>more information
is of the form xxxx.yy.zzzzz.901 i.e. with characteristic value 901
then you can also flash the following NoDo unbranded ROM, but you can comeback only to the above 1 ROM
B. Downloading
You must download the following 2 ROMs:
1. Download this zip ROM file: Uploading ...
2. Download this zip ROM file: Uploading ...
Extract the downloaded zip ROM files with an unzip / 7zip utility in separate folders of your choice
C. Flashing Process
In order to successfully flash the provided ROMs you must follow these steps:
1. Flash the ROM of the above (B.1.) extracted zip ROM file
2. After flashing HD 7 will automatically enter again in bootloader mode
3. In the screen of your computer the ROMUpdateUtility will report an ERROR[270]
4. Ignore it and exit from ROMUpdateUtility
5. Now flash the ROM of the above (B.2.) extracted zip ROM file
6. After flashing your HD 7 will boot normally
7. Exit from ROMUpdateUtility and proceed with your brand new ROM
If you do not want them you can delete all operator apps, in order to have more free RAM
Beware, in WP7 deleting an application means it is deleted from ROM
D. ROM Flashing Instructions
In order to flash a ROM follow these steps:
1. Press and hold power-on/off button to power-off the phone
2. Press and hold volume-down button and then press power-on/off button to enter bootloader mode
3. When your phone enters the tricolor screen bootloader mode, release volume-down button
4. Connect your phone to your windows 7/vista/xp pc/laptop with a usb cable
5. Verify that your phone will be identified and relevant drivers will be installed by windows os of your pc/laptop
6. After completion of (D.5.) above, check the usb message connection on your phone screen
7. To flash the ROM go to your pc/laptop folder where the downloaded zip ROM file is extracted
8. Double click on the ROMUpdateUtility.exe file and strictly follow the instructions on your pc/laptop screen
Till next version enjoy!!!
Regards, ansar
Related
Dear forum members,
In the following A, B, C and D sections is described the flashing process
of the NoDo unbranded ROM: RUU_Schubert_BellMobility_WWE_1.68.206.03_Radio_5.63.09.13_3a_22.36.50.15U_NoDo
A. Pre-Requisites
If your HD 7 is flashed with a ROM of the following release:
1. RUU_Schubert_BellMobility_WWE_2.16.666.02_Radio_5.64.09.11a_22.40.50.15U
then you can flash the following NoDo unbranded ROM and when you like you can comeback to your previous ROM
In case your HD 7 is flashed with a different of the above (1) ROM but your Firmware version at your phone settings>about>more information
is of the form xxxx.yy.zzzzz.666 i.e. with characteristic value 666
then you can also flash the following NoDo unbranded ROM, but you can comeback only to one of the above (1) ROM
B. Downloading
You must download the following 2 ROMs:
1. Download this zip ROM file: RUU_Schubert_BellMobility_WWE_1.68.206.03_Radio_5.63.09.13_3a_22.36.50.15U_NoDo_by_ansar
2. Download this zip ROM file: RUU_Schubert_BellMobility_WWE_1.68.206.03_Radio_5.63.09.13_3a_22.36.50.15U_NoDo_Signed_by_ansar
Extract the downloaded zip ROM files with an unzip / 7zip utility in separate folders of your choice
C. Flashing Process
In order to successfully flash the provided ROMs you must follow these steps:
1. Flash the ROM of the above (B.1.) extracted zip ROM file
2. After flashing HD 7 will automatically enter again in bootloader mode
3. In the screen of your computer the ROMUpdateUtility will report an ERROR[270]
4. Ignore it and exit from ROMUpdateUtility
5. Now flash the ROM of the above (B.2.) extracted zip ROM file
6. After flashing your HD 7 will boot normally
7. Exit from ROMUpdateUtility and proceed with your brand new ROM
If you do not want them you can delete all operator apps, in order to have more free RAM
Beware, in WP7 deleting an application means it is deleted from ROM
D. ROM Flashing Instructions
In order to flash a ROM follow these steps:
1. Press and hold power-on/off button to power-off the phone
2. Press and hold volume-down button and then press power-on/off button to enter bootloader mode
3. When your phone enters the tricolor screen bootloader mode, release volume-down button
4. Connect your phone to your windows 7/vista/xp pc/laptop with a usb cable
5. Verify that your phone will be identified and relevant drivers will be installed by windows os of your pc/laptop
6. After completion of (D.5.) above, check the usb message connection on your phone screen
7. To flash the ROM go to your pc/laptop folder where the downloaded zip ROM file is extracted
8. Double click on the ROMUpdateUtility.exe file and strictly follow the instructions on your pc/laptop screen
Till next version enjoy!!!
Regards, ansar
Hey ansar what's the difference between this one and the previous Bell/Telstra one you had posted? Thanks!
the-wrangler said:
Hey ansar what's the difference between this one and the previous Bell/Telstra one you had posted? Thanks!
Click to expand...
Click to collapse
Hi,
This is a NoDo ROM for BellMobility but from 206 i.e. O2_UK, see title
Regards, ansar
Dear forum members,
In the following A, B, C and D sections is described the flashing process
of the NoDo unbranded ROM: RUU_Mozart_TMO_CZ_1.30.401.01_Radio_5.54.09.21_22.33b.50U_NoDo
A. Pre-Requisites
If your Mozart is flashed with a ROM of the following releases:
1. RUU_Mozart_TMO_CZ_1.23.113.01_Radio_5.50.09.18_22.24.50.09U
2. RUU_Mozart_TMO_CZ_1.27.113.02_Radio_5.51.09.29_22.32.50.09U
then you can flash the following NoDo unbranded ROM and when you like you can comeback to your previous ROM
In case your Mozart is flashed with a different of the above 1, 2 ROMs but your Firmware version at your phone settings>about>more information
is of the form xxxx.yy.zzzzz.113 i.e. with characteristic value 113
then you can also flash the following NoDo unbranded ROM, but you can comeback only to one of the above 1, 2 ROMs
B. Downloading
You must download the following 2 ROMs:
1. Download this zip ROM file: RUU_Mozart_TMO_CZ_1.30.401.01_Radio_5.54.09.21_22.33b.50U_NoDo_by_ansar
2. Download this zip ROM file: RUU_Mozart_TMO_CZ_1.30.401.01_Radio_5.54.09.21_22.33b.50U_NoDo_Signed_by_ansar
Extract the downloaded zip ROM files with an unzip / 7zip utility in separate folders of your choice
C. Flashing Process
In order to successfully flash the provided ROMs you must follow these steps:
1. Flash the ROM of the above (B.1.) extracted zip ROM file
2. After flashing Mozart will automatically enter again in bootloader mode
3. In the screen of your computer the ROMUpdateUtility will report an ERROR[270]
4. Ignore it and exit from ROMUpdateUtility
5. Now flash the ROM of the above (B.2.) extracted zip ROM file
6. After flashing your Mozart will boot normally
7. Exit from ROMUpdateUtility and proceed with your brand new ROM
If you do not want them you can delete all operator apps, in order to have more free RAM
Beware, in WP7 deleting an application means it is deleted from ROM
D. ROM Flashing Instructions
In order to flash a ROM follow these steps:
1. Press and hold power-on/off button to power-off the phone
2. Press and hold volume-down button and then press power-on/off button to enter bootloader mode
3. When your phone enters the tricolor screen bootloader mode, release volume-down button
4. Connect your phone to your windows 7/vista/xp pc/laptop with a usb cable
5. Verify that your phone will be identified and relevant drivers will be installed by windows os of your pc/laptop
6. After completion of (D.5.) above, check the usb message connection on your phone screen
7. To flash the ROM go to your pc/laptop folder where the downloaded zip ROM file is extracted
8. Double click on the ROMUpdateUtility.exe file and strictly follow the instructions on your pc/laptop screen
Till next version enjoy!!!
Regards, ansar
dead links
hello, links to ROMs are dead...please can you re-upload them? thx
lukas26 said:
hello, links to ROMs are dead...please can you re-upload them? thx
Click to expand...
Click to collapse
Hi,
I did recover of network maintenance, pros and will try to fix it
Regards, ansar
Dear forum members,
This is a Cingular_US ROM for BellMobility that, except a 7390 platform build, is including the following apps:
- AT&T FamilyMap
- AT&T myWireless
- AT&T Navigator
- AT&T Radio and
- AT&T U-verse Mobile
Here are some more improvements:
- A newer ROM Radio and
- Speach recognition over the network
So if one is or will be in US with a BellMobility branded device can benefit of by unbranding to this one
As an option an AT&T SIM card can be used to get all privileges
AT&T does not yet provide an update to 7392 NoDo
Finally beware that this ROM supports English and Spanich only
In the following A, B, C and D sections is described the flashing process
of the NoDo unbranded ROM: RUU_Schubert_BellMobility_WWE_3.03.502.04_Radio_5.66.09.09a_22.46.50.21U_NoDo
A. Pre-Requisites
If your HD 7 is flashed with a ROM of the following releases:
1. RUU_Schubert_BellMobility_WWE_2.16.666.02_Radio_5.64.09.11a_22.40.50.15U
then you can flash the following NoDo unbranded ROM and when you like you can comeback to your previous ROM
In case your HD 7 is flashed with a different of the above (1) ROM but your Firmware version at your phone settings>about>more information
is of the form xxxx.yy.zzzzz.666 i.e. with characteristic value 666
then you can also flash the following NoDo unbranded ROM, but you can comeback only to one of the above (1) ROM
B. Downloading
You must download the following 2 ROMs:
1. Download this zip ROM file: RUU_Schubert_BellMobility_WWE_3.03.502.04_Radio_5.66.09.09a_22.46.50.21U_NoDo_by_ansar
2. Download this zip ROM file: RUU_Schubert_BellMobility_WWE_3.03.502.04_Radio_5.66.09.09a_22.46.50.21U_NoDo_Signed_by_ansar
Extract the downloaded zip ROM files with an unzip / 7zip utility in separate folders of your choice
C. Flashing Process
In order to successfully flash the provided ROMs you must follow these steps:
1. Flash the ROM of the above (B.1.) extracted zip ROM file
2. After flashing HD 7 will automatically enter again in bootloader mode
3. In the screen of your computer the ROMUpdateUtility will report an ERROR[270]
4. Ignore it and exit from ROMUpdateUtility
5. Now flash the ROM of the above (B.2.) extracted zip ROM file
6. After flashing your HD 7 will boot normally
7. Exit from ROMUpdateUtility and proceed with your brand new ROM
If you do not want them you can delete all operator apps, in order to have more free RAM
Beware, in WP7 deleting an application means it is deleted from ROM
D. ROM Flashing Instructions
In order to flash a ROM follow these steps:
1. Press and hold power-on/off button to power-off the phone
2. Press and hold volume-down button and then press power-on/off button to enter bootloader mode
3. When your phone enters the tricolor screen bootloader mode, release volume-down button
4. Connect your phone to your windows 7/vista/xp pc/laptop with a usb cable
5. Verify that your phone will be identified and relevant drivers will be installed by windows os of your pc/laptop
6. After completion of (D.5.) above, check the usb message connection on your phone screen
7. To flash the ROM go to your pc/laptop folder where the downloaded zip ROM file is extracted
8. Double click on the ROMUpdateUtility.exe file and strictly follow the instructions on your pc/laptop screen
Till next version enjoy!!!
Regards, ansar
Dear forum members,
In the following A, B, C and D sections is described the flashing process
of the NON NoDo unbranded ROM: RUU_Schubert_Cingular_US_1.54.531.02_Radio_5.66.09.09a_22.46.50.21U_Signed_by_ansar
It is suitable for chevronWP7 unlock and can be upgraded to 7008 and then to 7392 NoDo OS and keep unlocking
See my relevant thread: [Guide How To]Pass ChevronWP7 Unlocker from 7004 to 7392 NoDo via zune, by ansar
A. Pre-Requisites
If your HD 7 is flashed with a ROM of the following release:
1. RUU_Schubert_Cingular_US_3.03.502.02_Radio_5.66.09.09a_22.46.50.21U
then you can flash the following NON NoDo unbranded ROM and when you like you can comeback to your previous NoDo ROM
In case your HD 7 is flashed with a different of the above 1 ROM but your Firmware version at your phone settings>about>more information
is of the form xxxx.yy.zzzzz.502 i.e. with characteristic value 502
then you can also flash the following NON NoDo unbranded ROM, but you can comeback only to the above 1 ROM
B. Downloading
You must download the following 2 ROMs:
1. Download this zip ROM file: RUU_Schubert_Cingular_US_1.54.531.02_Radio_5.66.09.09a_22.46.50.21U_by_ansar
2. Download this zip ROM file: RUU_Schubert_Cingular_US_1.54.531.02_Radio_5.66.09.09a_22.46.50.21U_Signed_by_ansar
Extract the downloaded zip ROM files with an unzip / 7zip utility in separate folders of your choice
C. Flashing Process
In order to successfully flash the provided ROMs you must follow these steps:
1. Flash the ROM of the above (B.1.) extracted zip ROM file
2. After flashing HD 7 will automatically enter again in bootloader mode
3. In the screen of your computer the ROMUpdateUtility will report an ERROR[270]
4. Ignore it and exit from ROMUpdateUtility
5. Now flash the ROM of the above (B.2.) extracted zip ROM file
6. After flashing your HD 7 will boot normally
7. Exit from ROMUpdateUtility and proceed with your brand new ROM
If you do not want them you can delete all operator apps, in order to have more free RAM
Beware, in WP7 deleting an application means it is deleted from ROM
D. ROM Flashing Instructions
In order to flash a ROM follow these steps:
1. Press and hold power-on/off button to power-off the phone
2. Press and hold volume-down button and then press power-on/off button to enter bootloader mode
3. When your phone enters the tricolor screen bootloader mode, release volume-down button
4. Connect your phone to your windows 7/vista pc/laptop with a usb cable
5. Verify that your phone will be identified and relevant drivers will be installed by windows os of your pc/laptop
6. After completion of (D.5.) above, check the usb message connection on your phone screen
7. To flash the ROM go to your pc/laptop folder where the downloaded zip ROM file is extracted
8. Double click on the ROMUpdateUtility.exe file and strictly follow the instructions on your pc/laptop screen
Till next version enjoy!!!
Regards, ansar
Thank you, ansar.
Would you like to create a non-NoDo Europe ROM with latest radio? So ppl can unlock and then update to NoDo with latest radion.
hoaisonongame said:
Thank you, ansar.
Would you like to create a non-NoDo Europe ROM with latest radio? So ppl can unlock and then update to NoDo with latest radion.
Click to expand...
Click to collapse
Hi,
Not yet, but maybe will be possible, we will see ...
Thnx for commenting and supporting!!
Regards, ansar
bro
Thank you, ansar.
Bro_toyota said:
Thank you, ansar.
Click to expand...
Click to collapse
Hi,
Thnx for supporting!!
Regards, ansar
Hi, i can't update... it stays on 0% and then it shows me Error 260 which is Comm Error... but the usb is fine, and i tried in the 3 usb ports of my pc... so, what could it be?? thanks.
ERROR [260] : CONNECTION
This error occurs when there is an “open port error” before upgrading the CE ROM image.
Solution: You can reset the device and run RUU again. If you still encounter an “OPEN PORT ERROR” again, reset your computer and try again.
EDIT: Now it shows error 262...
ERROR [262, 276, 284, 302] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
i upgraded it to 7392... does it have to do something with it??
ZeroCool11 said:
Hi, i can't update... it stays on 0% and then it shows me Error 260 which is Comm Error... but the usb is fine, and i tried in the 3 usb ports of my pc... so, what could it be?? thanks.
ERROR [260] : CONNECTION
This error occurs when there is an “open port error” before upgrading the CE ROM image.
Solution: You can reset the device and run RUU again. If you still encounter an “OPEN PORT ERROR” again, reset your computer and try again.
EDIT: Now it shows error 262...
ERROR [262, 276, 284, 302] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
i upgraded it to 7392... does it have to do something with it??
Click to expand...
Click to collapse
Hi,
Do you start from tricolor screen in bootloader?
Regards, ansar
Thank you for this rom, great work!
For anyone wondering, if you have the HD7 S with AT&T, flash this rom, chevron unlock your phone, apply registry hack to keep phone unlocked, then update through zune to get back to NoDo
After a restart this morning I am in a bootloop. Only thing I'm able to enter stable is fastboot.
Tried to flash the stock fastboot rom but MiFlash and manually is giving me an error when trying to write the partition.
fastboot flash partition gpt_both0.bin
target reported max download size of 268435456 bytes
sending 'partition' (33 KB)...
OKAY [ 0.006s]
writing 'partition'...
FAILED (remote: failed to write partition)
If I flash TWRP through fastboot I can't enter it with volume up. If I use the bat version to flash TWRP, it restarts with TWRP but after a few seconds in TWRP it reboots into the bootloop.
Anyone any clue before I have to send my phone back to China :/
Use Mi Flash Tool - Install stock recovery
Its a common issue while using Custom recovery. so, to get life to your mobile you have to install stock recovery.
(search google if you cant able to find, because of xda limitation on New Users i cant post any external link here. Sorry!)
Step 1: Download MiFlash Tool & download your fastboot rom.
Step 2: Turn off the device. Press the Volume– key and the Power button at the same time to enter Fastboot mode. Then connect the device to the Windows PC/laptop via a micro USB cable
Step 3: Double click on the downloaded ROM file to decompress it. Open the file folder for the decompressed ROM pack, and copy its path on the computer.
Step 4: Decompress the MIUI ROM flashing tool downloaded in Step 1, and double click on it to install (if there is security warning, select 'Run'). After installation is completed, open MiFlash.exe and paste into the address bar the ROM file folder path copied in the last step.
Click on the first button (circled out in yellow) to Refresh, and MiFlash should automatically recognize the device. Then click the second button (circled out in red) to flash the ROM file to the device.
Step 5: Wait until the progress bar inside MiFlash turns fully green, which means the ROM has been successfully installed. Then your device should automatically boot to the new version.
Step 6: Wait till the phone boot up - at first it may take more than 5 Min.Be patient with it,
Note: Using MiFlash Tool :
At first try to flash without losing data, if doesn't helps, then select Flash All. (for my Redmi 2 prime it worked with flash all). If any error let me know in comment section.:good::good:
kalachar said:
Its a common issue while using Custom recovery. so, to get life to your mobile you have to install stock recovery.
(search google if you cant able to find, because of xda limitation on New Users i cant post any external link here. Sorry!)
Step 1: Download MiFlash Tool & download your fastboot rom.
Step 2: Turn off the device. Press the Volume– key and the Power button at the same time to enter Fastboot mode. Then connect the device to the Windows PC/laptop via a micro USB cable
Step 3: Double click on the downloaded ROM file to decompress it. Open the file folder for the decompressed ROM pack, and copy its path on the computer.
Step 4: Decompress the MIUI ROM flashing tool downloaded in Step 1, and double click on it to install (if there is security warning, select 'Run'). After installation is completed, open MiFlash.exe and paste into the address bar the ROM file folder path copied in the last step.
Click on the first button (circled out in yellow) to Refresh, and MiFlash should automatically recognize the device. Then click the second button (circled out in red) to flash the ROM file to the device.
Step 5: Wait until the progress bar inside MiFlash turns fully green, which means the ROM has been successfully installed. Then your device should automatically boot to the new version.
Step 6: Wait till the phone boot up - at first it may take more than 5 Min.Be patient with it,
Note: Using MiFlash Tool :
At first try to flash without losing data, if doesn't helps, then select Flash All. (for my Redmi 2 prime it worked with flash all). If any error let me know in comment section.:good::good:
Click to expand...
Click to collapse
Thanks for your suggestion kalachar.
MiFlash is giving me the same error though.
0x8000405: FAILED (remote:failed to write partition)
I managed to enter TWRP once without it rebooting, I checked everything and the problem seems to be nothing from internal memory can be mounted.
I could only mount persist and modem.
Try Full format,
Wipe>Format>type "Yes"
wait for it to complete and then reboot
if the problem still,try flash in Mi flash,.
Hope it useful,.
nothing happen after applying this method
kalachar said:
Its a common issue while using Custom recovery. so, to get life to your mobile you have to install stock recovery.
(search google if you cant able to find, because of xda limitation on New Users i cant post any external link here. Sorry!)
Step 1: Download MiFlash Tool & download your fastboot rom.
Step 2: Turn off the device. Press the Volume– key and the Power button at the same time to enter Fastboot mode. Then connect the device to the Windows PC/laptop via a micro USB cable
Step 3: Double click on the downloaded ROM file to decompress it. Open the file folder for the decompressed ROM pack, and copy its path on the computer.
Step 4: Decompress the MIUI ROM flashing tool downloaded in Step 1, and double click on it to install (if there is security warning, select 'Run'). After installation is completed, open MiFlash.exe and paste into the address bar the ROM file folder path copied in the last step.
Click on the first button (circled out in yellow) to Refresh, and MiFlash should automatically recognize the device. Then click the second button (circled out in red) to flash the ROM file to the device.
Step 5: Wait until the progress bar inside MiFlash turns fully green, which means the ROM has been successfully installed. Then your device should automatically boot to the new version.
Step 6: Wait till the phone boot up - at first it may take more than 5 Min.Be patient with it,
Note: Using MiFlash Tool :
At first try to flash without losing data, if doesn't helps, then select Flash All. (for my Redmi 2 prime it worked with flash all). If any error let me know in comment section.:good::good:
Click to expand...
Click to collapse
i have redmi 2 with 1 gb ram 8 gb rom so i was trying to root it so i have installed custom recovery and root the device and SU icon appears after boot then i open the super user but unfotunatelty i chose 'TWRP/CWM' instead of 'Normal and my phone reboot and now only back screen appears and I have tried this but nothing happen fastboot still there is there any method to make my mi work again.