hello everyone
i have a quick question
is it true i shouldn't use setvsel with CM7?because i just read that in the FAQ thread for CM7 here:http://forum.xda-developers.com/showthread.php?t=1065798
and i need setvsel because i use it to undervolting and also i don't to overclock my cpu to 1Ghz since 800mhz can handle all the games i play and im getting 1900-2100 score in quadrant on stock cpu speed
and if i can't use it or shouldn't what program should i use ??since cpu settings in cm settings doesn't include undervolting
(although i've been use it on CM7 rom for 3 days now and i didn't have any trouble)
thanx in advance
appreciate your help guys
Hi there,
CM7 RC0 has the CPU clock speeds & Vsel in the bootmenu where you can overclock, undervolt, change the governor etc.
If you reboot your phone & go into the bootmenu when the blue led comes on then you can access the overclock menu.
There's more info in Quarx's thread in the dev forum
http://forum.xda-developers.com/showthread.php?p=13845272&highlight=smartass#post13845272
sp8y said:
Hi there,
CM7 RC0 has the CPU clock speeds & Vsel in the bootmenu where you can overclock, undervolt, change the governor etc.
If you reboot your phone & go into the bootmenu when the blue led comes on then you can access the overclock menu.
There's more info in Quarx's thread in the dev forum
http://forum.xda-developers.com/showthread.php?p=13845272&highlight=smartass#post13845272
Click to expand...
Click to collapse
ok but setvsel is quicker and easier...so can i use it or i shouldn't?
Evil Slayer said:
ok but setvsel is quicker and easier...so can i use it or i shouldn't?
Click to expand...
Click to collapse
From what I've read in the relevant threads about CM7 many people are saying not use it.
I used it in froyo but since flashing CM7 RC0 I only use the bootmenu for CPU settings.
sp8y said:
From what I've read in the relevant threads about CM7 many people are saying not use it.
I used it in froyo but since flashing CM7 RC0 I only use the bootmenu for CPU settings.
Click to expand...
Click to collapse
ok apart from the three clocks and their vsels and the up_trashhold do i need to change anything?
Evil Slayer said:
ok apart from the three clocks and their vsels and the up_trashhold do i need to change anything?
Click to expand...
Click to collapse
I used the same settings that peetr_ used in the post I've linked to above. It uses the smartass governor.
It appears that there's different settings depending upon which governor is selected:
eg; for the smartass governor then in the overclock settings list the settings that start with _smt are relevant,
interactive governor _int,
ondemand governor _ond, etc.
Think that's how it works
sp8y said:
I used the same settings that peetr_ used in the post I've linked to above. It uses the smartass governor.
It appears that there's different settings depending upon which governor is selected:
eg; for the smartass governor then in the overclock settings list the settings that start with _smt are relevant,
interactive governor _int,
ondemand governor _ond, etc.
Think that's how it works
Click to expand...
Click to collapse
How's Battery Life On Your Settings...And Gaming?
Evil Slayer said:
How's Battery Life On Your Settings...And Gaming?
Click to expand...
Click to collapse
Not sure yet as only changed the settings last night.
Also today I have changed the screen brightness levels so will see how it goes.
Sent from my MotoDefy.
sp8y said:
Not sure yet as only changed the settings last night.
Also today I have changed the screen brightness levels so will see how it goes.
Sent from my MotoDefy.
Click to expand...
Click to collapse
i just applied it too...although i don't need 1GHz
Would You Please Report Back To See If Your Result Match Mine?
Thanx alot for helping btw...i really appreciate it
Evil Slayer said:
i just applied it too...although i don't need 1GHz
Would You Please Report Back To See If Your Result Match Mine?
Thanx alot for helping btw...i really appreciate it
Click to expand...
Click to collapse
No problem pleased I could help
I left the bootmenu cpu frequencies as to what they were but undervolted them slightly.
300/22, 600/34, 1000/54 - I tried many settings using setvsel when running froyo so I know these work fine for me.
As for the other settings I just used those that peetr_ posted for the smartass governor & it seems to run nicely. Haven't had any issues yet
sp8y said:
No problem pleased I could help
I left the bootmenu cpu frequencies as to what they were but undervolted them slightly.
300/22, 600/34, 1000/54 - I tried many settings using setvsel when running froyo so I know these work fine for me.
As for the other settings I just used those that peetr_ posted for the smartass governor & it seems to run nicely. Haven't had any issues yet
Click to expand...
Click to collapse
btw...when i used the values in the post you gave me the phone was running without any issues but if you open setvsel and looked at the cpu it keeps changing from 300 to 1000 even if you are not doing anything but if you used the ondemand scale governor you will notice that if you are not doing anything the value stays 300mhz so im not sure that smartass is a good governor after all...or maybe its just me
anyways i think i will keep the settings like this:
[email protected]
[email protected]
[email protected]
also change the other values in menu like this(i think you must change them according to the values you gave your cpu in the 3 vsels):
smt_min:30
smt_max:80(although i suspect this one should be 100 but since the user in the thread you gave kept it 80 im keeping it 80 )
smt_awake:300000
smt_sleep_max:300000
smt_up_min:1000000
smt__wakeup:1000000
smt_ramp:300000
ond_up_threshold:75
what do you think of these values ?
and also...can you tell my your temp in normal state and in after heavy use ?i think mine stays hot
oh and btw could you provide me with a link for the youtube apk you are using i can't seem to find a one that works
Evil Slayer said:
btw...when i used the values in the post you gave me the phone was running without any issues but if you open setvsel and looked at the cpu it keeps changing from 300 to 1000 even if you are not doing anything but if you used the ondemand scale governor you will notice that if you are not doing anything the value stays 300mhz so im not sure that smartass is a good governor after all...or maybe its just me
anyways i think i will keep the settings like this:
[email protected]
[email protected]
[email protected]
also change the other values in menu like this(i think you must change them according to the values you gave your cpu in the 3 vsels):
smt_min:30
smt_max:80(although i suspect this one should be 100 but since the user in the thread you gave kept it 80 im keeping it 80 )
smt_awake:300000
smt_sleep_max:300000
smt_up_min:1000000
smt__wakeup:1000000
smt_ramp:300000
ond_up_threshold:75
what do you think of these values ?
and also...can you tell my your temp in normal state and in after heavy use ?i think mine stays hot
Click to expand...
Click to collapse
My cpu sometimes jumped from 300-1000 when I used setvsel on froyo.
Temperature wise it seems to be running similar if not slightly cooler than when on froyo. Now the hottest I have seen battery temp is 35C but it is mostly much cooler than that.
Sent from my MotoDefy.
Evil Slayer said:
oh and btw could you provide me with a link for the youtube apk you are using i can't seem to find a one that works
Click to expand...
Click to collapse
I just have the current market youtube app. Not sure if it was included in the gapps package?
Sent from my MotoDefy.
sp8y said:
My cpu sometimes jumped from 300-1000 when I used setvsel on froyo.
Temperature wise it seems to be running similar if not slightly cooler than when on froyo. Now the hottest I have seen battery temp is 35C but it is mostly much cooler than that.
Sent from my MotoDefy.
Click to expand...
Click to collapse
hmm..mine reached 39c on very heavy use...normaly its around 30c
and about the youtube app..no it wasn't included and i downloaded the app in the market but it crashes on most videos
btw im getting 2000-2500 in quadrant...how come?i think that is too good to be true
Here's what i've come up with, using google (lets correct them, if some are wrong) :
con_up_threshold: [80] # system load in % above which increases the CPU frequency?
con_down_threshold: [20] # system load in % above which drops the CPU frequency?
con_freq_step: [5] # frequency step?
con_sampling_rate: [160000] # interval (in milliseconds) between polls of the system. In fact, the intervals between changes of CPU frequency? Times in 160 seconds?
int_min_sampling_rate: [50000] # minimal interval (in milliseconds) between polls of the system. In fact, the intervals between changes of CPU frequency? Every 50 seconds?
ond_up_threshold: [86] # CPU in % above which increases the frequency of the processor.
ond_sampling_rate: [50000] # second? interval (in milliseconds) between polls of the system. In fact, the intervals between changes of CPU frequency? Every 50 seconds?
smt_min_cpu_load: [40] # CPU usage in % in achieving a reduced frequency of the processor
smt_max_cpu_load: [85] # CPU in % above which increases the CPU frequency
smt_awake_min_freq: [30000] # The minimum frequency of waking up?
smt_sleep_max_freq: [30000] # CPU frequency during sleep?
smt_up_min_freq: [1200000] # The minimal jump. so default made the cpu jump every time to max speed
smt_wakeup_freq: [1200000] # The frequency of waking up. It is important to not lose calls.
smt_ramp_up_step: [250000] # How much to increase the frequency at one time?
Click to expand...
Click to collapse
So witch is the best governor and settings for normal daily usage like some texts, calls, 3g/wifi, maybe some games ?
I'm on smartass right now with these settings
Vsel1 - 20
2 - 31
3 - 54
smt_min... - 30
smt_max... - 80
smt_awake_min... - 300000
smt_sleep_max... - 300000
smt_up_min... - 1000000
smt_wake_up_... - 1000000
smt_ramp_up_step - 400000
Click to expand...
Click to collapse
SpawNyK said:
Here's what i've come up with, using google (lets correct them, if some are wrong) :
So witch is the best governor and settings for normal daily usage like some texts, calls, 3g/wifi, maybe some games ?
I'm on smartass right now with these settings
Click to expand...
Click to collapse
i don't know...really..i can't seem to relate what are the values for with the available governors
my only problem with smartass governor that even if im not using the cpu the values keep changing between 300mhz-1000ghz but when im using on demand if im not doing anything with the phone the cpu stays at 300mhz but when i start using the phone(moving the screen up and down for example)the values changes to 1000ghz and when i stop the values goes back to 300mhz that's why im using on demand...but again it might be just my cpu
looks like it requires to dig more in the differences between each governor
anyway i read in the latest post in CM7 DEV thread that some people is actually using setvsel so i opened my boot menu,and went to overclock,selected set default,reboted,and installed setvsel and applied these values:
20/300
33/600
47/800
up_therhold:75
oh and btw...how's your battery life ?
Dudes, so please, quick answer:
Use SetVsel - no
use build in "overclock" settings in CM7 RC0 - yes?
Any one using CM7 RC0 bootmenu> Overclocking?
There are more values than in peters thread.
Please advise with all info/numbers according to present in overclocking bootmenu 0.8.6 values.
m_zet said:
Dudes, so please, quick answer:
Use SetVsel - no
use build in "overclock" settings in CM7 RC0 - yes?
Any one using CM7 RC0 bootmenu> Overclocking?
There are more values than in peters thread.
Please advise with all info/numbers according to present in overclocking bootmenu 0.8.6 values.
Click to expand...
Click to collapse
Yes I've got CM7 RC0 & using the bootmenu overclock.
There's many values in the menu as it depends upon which governor you have set it to so only those values relevant to that governor will be used.
For instance on Smartass governor - the values starting with _smt will apply
Related
Mine is
Performance
Min/Max 1.2 ghz
Auto dectect
Whats yours?
Really auto detect? After every kernel dev says that auto detect isn't stable?
Really?
what should i put?
RacerXFD said:
Really auto detect? After every kernel dev says that auto detect isn't stable?
Really?
Click to expand...
Click to collapse
???
you have to use auto-detect for setcpu to detect your availble clock speeds
on-demand is BROKEN
performance will drain your battery abnormally
running at 100 min / whatever max on conservative is the most stable option for this device at the current time
Leave the advanced settings alone also?
jt1134 said:
you have to use auto-detect for setcpu to detect your availble clock speeds
Click to expand...
Click to collapse
not to contradict, but you dont have to use it, you can use the setCPU.txt file and i recommend it
here is the one i use currently with the D02 1250LV kernel, it is nothing more than a simple text file which tells the setCPU app what are valid steppings/scaling so it cannot auto-detect incorrectly as it often does
http://dl.dropbox.com/u/12311939/setcpu.txt
all you have to do is edit it to the steps that match the kernel you load and drop it in the root of the sd card, then go into setCPU, hit softmenu to go to device selection, scroll down and choose custom or manual...i forget what its called...then scroll down to the bottom and tell it to use the setcpu.txt file option and restart....done, no more problems at boot with setCPU
I only use performance when benchmarking. I use on-demand day to day. Set to 1250 max 100 min. I actually read the entire setCPU dev page, I suggest you do also, keeping in mind the limitations of the kernel you choose to load. I do not use on-demand scaling. I do not use profiles either. I do however, after testing my own device, use "set at boot". Two things on that. 1. setCPU now has a safe mode feature to get out of a problem and 2. I also use the setcpu.txt option instead of auto-detect which is hit or miss. Using the setcpu.txt file method (be sure to go to device selection and choose the bottom custom option) setCPU cannot accidentally set itself to the wrong frequency, it gets it's allowed steppings from the file you create.
if you read the setCPU dev page you (not directed at you jt ) will learn all of this and also about the advanced settings....but they work fine as they are for my device/kernel/usage
jamesnmandy said:
not to contradict, but you dont have to use it, you can use the setCPU.txt file and i recommend it
here is the one i use currently with the D02 1250LV kernel, it is nothing more than a simple text file which tells the setCPU app what are valid steppings/scaling so it cannot auto-detect incorrectly as it often does
http://dl.dropbox.com/u/12311939/setcpu.txt
all you have to do is edit it to the steps that match the kernel you load and drop it in the root of the sd card, then go into setCPU, hit softmenu to go to device selection, scroll down and choose custom or manual...i forget what its called...then scroll down to the bottom and tell it to use the setcpu.txt file option and restart....done, no more problems at boot with setCPU
I only use performance when benchmarking. I use on-demand day to day. Set to 1250 max 100 min. I actually read the entire setCPU dev page, I suggest you do also, keeping in mind the limitations of the kernel you choose to load. I do not use on-demand scaling. I do not use profiles either. I do however, after testing my own device, use "set at boot". Two things on that. 1. setCPU now has a safe mode feature to get out of a problem and 2. I also use the setcpu.txt option instead of auto-detect which is hit or miss. Using the setcpu.txt file method (be sure to go to device selection and choose the bottom custom option) setCPU cannot accidentally set itself to the wrong frequency, it gets it's allowed steppings from the file you create.
if you read the setCPU dev page you (not directed at you jt ) will learn all of this and also about the advanced settings....but they work fine as they are for my device/kernel/usage
Click to expand...
Click to collapse
Contradict much?
Nice find there james
Im wondering what would happen if you didnt match the increments in your txt file to the kernels native ones?
Lol, I only speak of what I know to be true you guys have far more knowledge but I tested this on my own device and also used it on the ally I had so I know its good
Sent from my SCH-I500 using XDA App
Id say probably either fc or nothing. Either it would try to hit something it cant and fc or it would discard the step, but then the large jump sau from 200 to 600 skipping 400 may cause an issue
Sent from my SCH-I500 using XDA App
Well, if I can keep mine running stable for a couple of days, with no "permasleeps" then I will give start on boot a try. So far I'm having excellent luck with 1100 max 100 min with conservative. Set to auto, it brought the right figures up immediately. So far the thing is really running great with the 1100 LV kernal and the settings I mentioned above. I'm sure my quadrant will be lower than 1200, but for some reason the 1200 kernal was only stable when I was placing load on the device, actually using it. When it was idle the screen would "permasleep". Very odd. Stress testing on the 1200 LV kernal threw no errors, but I still had idle issues.
SirKronan said:
Well, if I can keep mine running stable for a couple of days, with no "permasleeps" then I will give start on boot a try. So far I'm having excellent luck with 1100 max 100 min with conservative. Set to auto, it brought the right figures up immediately. So far the thing is really running great with the 1100 LV kernal and the settings I mentioned above. I'm sure my quadrant will be lower than 1200, but for some reason the 1200 kernal was only stable when I was placing load on the device, actually using it. When it was idle the screen would "permasleep". Very odd. Stress testing on the 1200 LV kernal threw no errors, but I still had idle issues.
Click to expand...
Click to collapse
Maybe check out the 1200SV as well and/or jt's 1200. Heck I tried them all myself at least briefly
saps said:
Maybe check out the 1200SV as well and/or jt's 1200. Heck I tried them all myself at least briefly
Click to expand...
Click to collapse
The SV is working good so far, but where do you get jt's?
SirKronan said:
The SV is working good so far, but where do you get jt's?
Click to expand...
Click to collapse
Right here: http://forum.xda-developers.com/showthread.php?t=804317
Sorry if it is a noob question but
I have the jt's voodoo kernel and just restored my setcpu from the titanium back up...
the max that it gives me is only 1000000....
I thought It should change to 1200000
how can I change it?
if not what should I do to OC this bad boy?
btw I Used the recommended speed...
Thanks
Zirabius said:
Sorry if it is a noob question but
I have the jt's voodoo kernel and just restored my setcpu from the titanium back up...
the max that it gives me is only 1000000....
I thought It should change to 1200000
how can I change it?
if not what should I do to OC this bad boy?
btw I Used the recommended speed...
Thanks
Click to expand...
Click to collapse
Download the 1200 w/ boot animation. This happened to me last night when updating my wife's fascinate. I first downloaded the one without boot animation, which was fine, but only would clock to 1000 and was getting the battery not connected error. So I flashed the 1200 w/boot animation and fixed everything.
mackeydesigns said:
Download the 1200 w/ boot animation. This happened to me last night when updating my wife's fascinate. I first downloaded the one without boot animation, which was fine, but only would clock to 1000 and was getting the battery not connected error. So I flashed the 1200 w/boot animation and fixed everything.
Click to expand...
Click to collapse
Thanks works great now
Sent from my SCH-I500 using XDA App
mackeydesigns said:
Download the 1200 w/ boot animation. This happened to me last night when updating my wife's fascinate. I first downloaded the one without boot animation, which was fine, but only would clock to 1000 and was getting the battery not connected error. So I flashed the 1200 w/boot animation and fixed everything.
Click to expand...
Click to collapse
I just flashed my Fascinate with the 1200 w/ boot animation and then SetCPU from the market but SetCPU only allows my Max slider to 528MHz??? what did i do wrong?
Sorry for another noob question.
rickys08 said:
I just flashed my Fascinate with the 1200 w/ boot animation and then SetCPU from the market but SetCPU only allows my Max slider to 528MHz??? what did i do wrong?
Sorry for another noob question.
Click to expand...
Click to collapse
Think about it for a second... Has it sunk in yet? Didn't think so.
You changed speeds so you need to redetect your speed. Either do that or uninstall the app and reinstall it.
Sent from my SCH-I500 using XDA App
rickys08 said:
I just flashed my Fascinate with the 1200 w/ boot animation and then SetCPU from the market but SetCPU only allows my Max slider to 528MHz??? what did i do wrong?
Sorry for another noob question.
Click to expand...
Click to collapse
that happend too me too man,
what I did was I went to the menu and did an auto speed detect...
and the problem solved! its been running smoothly ever since
I am using cm 6.1 nightly and would like to know how to tune my mobile for long battery life. Wish setcpu could look into my usage and suggest presets for long battery life or performance.
my main is: Min: 245, Max: 710
Screen off: Min: 245, Max: 352
even without the screen off profiles or anything i still get 1-2 days + depending on my usage, and since i like to play with my phone and abuse the wifi/3g it lasts like a day anyway.
With screen on, max 633, min 480. create a profile so when screen is off, max 352 & min 160.
Mine is atm at 10% battery and it's been on for 51h & 30m and in that time it's been awake for 9h & 38m.
When i'm home, wifi is always on.
Gps is only on when needed, and so is bluetooth.
A suggestion for setcpu, it can collect the settings from users and provide the average as an option. This will really help new users. Integration with cm parts will be kickass.
kevin2516 and fusk.
i like yours max and min settings, but what type of scalling u guys use?
ondemand
userspace
performance
interactive (how does it work? couldnt find it on setcpu site)
thanks!
Vecaly said:
kevin2516 and fusk.
i like yours max and min settings, but what type of scalling u guys use?
ondemand
userspace
performance
interactive (how does it work? couldnt find it on setcpu site)
thanks!
Click to expand...
Click to collapse
"couldnt find it on setcpu site"
Oh really? http://www.pokedev.com/setcpu/#7
nemuro said:
"couldnt find it on setcpu site"
Oh really? http://www.pokedev.com/setcpu/#7
Click to expand...
Click to collapse
yeah i saw it before, but i didnt find interactive.
interactive = conservative?
http://forum.cyanogenmod.com/topic/4434-froyo-kernels-by-slayher/
Look for the small text in the signature of the OP.
nemuro said:
http://forum.cyanogenmod.com/topic/4434-froyo-kernels-by-slayher/
Look for the small text in the signature of the OP.
Click to expand...
Click to collapse
thanks.
kept "ondemand".
By having different profiles, we end up changing the CPU frequency limits frequently. Could this harm the CPU? This question was asked elsewhere but am not able to track it (iirc, it was not answered)
I think it will harm CPU. i have been using few profiles for a week. Yesterday it froze for 6 times. . So yeah....
Sent from my HTC Wildfire using XDA App
Vecaly said:
kevin2516 and fusk.
i like yours max and min settings, but what type of scalling u guys use?
ondemand
userspace
performance
interactive (how does it work? couldnt find it on setcpu site)
thanks!
Click to expand...
Click to collapse
I use ondemand and i've set threshold at 90%
works for me.
hackworks said:
By having different profiles, we end up changing the CPU frequency limits frequently. Could this harm the CPU? This question was asked elsewhere but am not able to track it (iirc, it was not answered)
Click to expand...
Click to collapse
No it does not harm the cpu.
think of other cpu's like intel or amd, they also can be throttled either through the hardware or software, to lower power consumption when not used, and visa versa.
I just use the main profile, the phone tends to freeze when switching profiles so i removed all the ones i had.
Running 160-672mhz. Running fine and doesn't freeze anymore.
When i use a profile for screen off, it sometimes takes a second or two to switch cpu speeds. It's kind of annoying as if i don't wait for it to change to the main speed, it may freeze.
Anyone else experiencing this ?
mods if this is the wrong place for this post please move accordingly.
I used to run setcpu on my desire and could set the min value to 245 and watch it stabilise at that. Now when I set the same parameters on my dhd, watching the CPU values I see it fluctuating between the min value of 245 and the max value every couple of seconds and it never seems to stabilise.
I have scaling set to on demand, whereas on the desire I used smartass. This doesn't seem to be an option in my dhd but as far as I can see this is the only difference.
Any ideas on why the fluctuation? This occurs even after killing all tasks.
Did you disable perflock?
sent from my brain using telepathy
Yep, made no difference. I'm curious to know why there is no smartass option as this is what worked best with my desire?
Using leedroid rom BTW if that has any bearing on things?
do you use a custom kernel?
Ah, that's one thing I haven't done ... any thoughts on which to use?
I have tried the buzz uv with Leedroid but it doesn't want to know!
hey I have the same problem...
I use Leedroid rom and the kernel to max 1,22 Ghz and the smartass setting...
SetCpu shifts between min and max cpu settings ??
dk_iceman said:
hey I have the same problem...
I use Leedroid rom and the kernel to max 1,22 Ghz and the smartass setting...
SetCpu shifts between min and max cpu settings ??
Click to expand...
Click to collapse
Yep, every few seconds it changes from min to max!
I have tried also flashing the kernel without Leedroid installed and still no joy. Am I right in thinking I should be able to update the kernel simply by choosing 'install rom from sd card' in rom manager?
... or am I doing something wrong?
PS - yes I have root and S-OFF
Can someone help me with the proper way to overclock the miui rom? I have dalingrins latest kernal, SETCPU, and nook tweaks all installed.
I have my steps set in nook tweaks and it set to set on boot. Also have setcpu set to ondemand gov. Should setcpu be also set on boot?
What I want is 375 min, 1100 max, and ondemand governor. What's the proper way to achieve this? Is setCPU even necessary?
Sent from my NookColor using XDA Premium App
This depends on MIUI's build.
If it's depending on the latest builds with dalgirins kernal and it recogonizes the 1100 and 1200 steps in it's settings, then you can set ondemand and 1100 and set on boot.
If it's not based on the integrated kernal, which you can tell the settings will only go to 925, then you need to install dalgrins kernal and use setcpu, allow root. Set it on boot. Max the setting at 1100, and set the governor on demand. profile it as you like.
WIth Dalgrin's mod... download 1.4.3 nook tweaks.. that is all you need period.
you can test what the highest voltage you can get to without UV. So try 1300 in Nook tweaks and leave the voltage alone. (DO NOT SET ON BOOT) until you have run through nenamarks back to back multiple times and quadrants back to back multiple times without random reboots or freezes.
In CM Mod Settings, Change the governer to conservative, that is your best bet to oc as it is built for solid state memory, such as memory cards (which is all cell phones.)
That is all you need... the rest is just trial and error because all chips are different period.
Then when everything is kewl, then start undervolting.... from the bottom clock speeds and up
slider2828 said:
WIth Dalgrin's mod... download 1.4.3 nook tweaks.. that is all you need period.
you can test what the highest voltage you can get to without UV. So try 1300 in Nook tweaks and leave the voltage alone. (DO NOT SET ON BOOT) until you have run through nenamarks back to back multiple times and quadrants back to back multiple times without random reboots or freezes.
In CM Mod Settings, Change the governer to conservative, that is your best bet to oc as it is built for solid state memory, such as memory cards (which is all cell phones.)
That is all you need... the rest is just trial and error because all chips are different period.
Then when everything is kewl, then start undervolting.... from the bottom clock speeds and up
Click to expand...
Click to collapse
There is no CMod Settings in MIUI.
Nburnes said:
There is no CMod Settings in MIUI.
Click to expand...
Click to collapse
Woops sorry... no cm7 settings... is there a way to set the governor in miui?
slider2828 said:
Woops sorry... no cm7 settings... is there a way to set the governor in miui?
Click to expand...
Click to collapse
SetCPU or one of the other countless OC applications.
Nburnes said:
SetCPU or one of the other countless OC applications.
Click to expand...
Click to collapse
is setcpu > then nook color tweaks?
In my experience on phones, setcpu does drain battery a little more than other apps.....
slider2828 said:
is setcpu > then nook color tweaks?
In my experience on phones, setcpu does drain battery a little more than other apps.....
Click to expand...
Click to collapse
SetCPU is to set the actual OC and governor of the processor. Nook Tweaks simply changes the steppings that setCPU sees and allows for UV/OV.
I need maximum battery time. So what is the best kernel for this and it´s configuration? I don´t need answers like "search for it" . Go hell those stupid guys.
voidvader said:
I need maximum battery time. So what is the best kernel for this and it´s configuration? I don´t need answers like "search for it" . Go hell those stupid guys.
Click to expand...
Click to collapse
there is no such thing as perfect kernel or perfect configuration,
the factors that can determine the amount of battery usage depends heavily on the nature of the usage under the user itself,
most kernels with undervolt support and underclocking will do fine,
i'd suggest you try out tweaks and preferences yourself since no one can guarantee you an exact time frame,
but i'll give you mine,
ROM: WP8 Monochromatic 5.1
Kernel: Built-in rom (savie's)
Tweaks: Built-in rom
Scaling freq: 156min 624max
CPU Governor: ondemandx
reduced all bloatwares even gmail and maps,
Battery Time (heavy usage): 4hrs max (medium usage): 1-1.5 day max (minimal usage) 2-3days max
that's just about it,
please take the time to conduct a research on what is your best prefered battery saving method,
don't call anyone stupid,
it's bad and potato disapproves
Rom doesnt matter really if you manage the applications well.
Use kuros kernel + kuros tweaks. Thats the best battery saving combo Ive tried.
For governor, use ondemand, the most battery efficient governor and use deadline for i/o
deathnotice01 said:
there is no such thing as perfect kernel or perfect configuration,
the factors that can determine the amount of battery usage depends heavily on the nature of the usage under the user itself,
Click to expand...
Click to collapse
Not really. Change between Merruk #206 and kuros latest, you can really notice the battery drain difference. Its battery efficient than stock kernel in my tests.
Here u go:
Before all id reccomend updating the software to the latest version xD
Use the latest white kernel
Use v6 supercharger and some other tweaks
Reduce the screen brightness
Lower the system volume in the sounds options
Disable animation
Disable auto-sync
Disable backup settings
Disable roaming ^^,wifi,mobile internet,bluetooth when you dont use it(gps even if turned on allways is only actually active when theres a open app that uses gps ^^)
Disabling more sound effects will make it ugly and not cool lol,so do as u wish with thease:
Keyboard sounds
Lock screen sounds and vibration
set a boot frequency in set cpu like:
312-832,conservative,sio
Set up proper profiles in set cpu like
Screen off
312-312,powersave,noop
Charging
312-832,ondemand,sio
Battery 50 F
312-832, conservative,noop
Battery <16
312-832, conservative, noop
here just take my setcpu profiles, i made it in setcpu 3.07 just put it in the root of your sdcard and in setcpu enable profiles and click on restore profiles and click on that
http://www.mediafire.com/?ru786ho4o9i7jdp
Here are some build.prop tweaks
ro.ril.power.collapse=0
ro.ril.disable.power.collapse=0
dalvik.vm.heapstartsize=4
dalvik.vm.startheapsize=4
this one is alredy in v6 supercharger ;P
pm.sleepmode=1
remove some useless apps that u dont use but their allways running in the background(yeah remove anything u will never use)
Google maps
email(not gmail)
software update
and buying a new, better battery isnt a bad idea too ? is it (obviously xD)
I hope i Helped, this and some of my other build.prop tweaks made my battery go like lol xD it was lasting so long idk how much was it
Thank you all! Thanks so much guys!:good:
Filip98 said:
Here are some build.prop tweaks
ro.ril.power.collapse=0
ro.ril.disable.power.collapse=0
dalvik.vm.heapstartsize=4
dalvik.vm.startheapsize=4
this one is alredy in v6 supercharger ;P
pm.sleepmode=1
I hope i Helped, this and some of my other build.prop tweaks made my battery go like lol xD it was lasting so long idk how much was it
Click to expand...
Click to collapse
the correct one is "dalvik.vm.heapstartsize". dalvik.vm.startheapsize is not exist. nevertheless, this script only work for ICS. GB based rom doesnt have these prop. please be carefull with any prop for virtual memory like this one. if you clean your dalvik-cache you might ended up in bootloop.
Lots of information.
Thanks guys.
Sent from my GT-S5360 using xda premium