Just upgraded to the B136 Rom and since then my bluetooth doesnt work. it comes on, others can find it. when i pair with someone it says paired but not connected,when sending/receiving there is no request on either phone and after a while it says sending failed. Please help.
Hey Guys!
I have the same problem, but have never istalled a new fw.
Is there anyone, who could help me, pls?
To fix that just long press the device and select unpair. Now it will show as fresh device and try to pair/connect again. To get around that, sometimes you have to reboot the phone... I found that B160 has no problems with bluetooth.
Had the same problem with the stock rom and am still having it with b160
Related
I'm hoping somebody here can help, because I'd hate to have to get rid of a device that I really love...
Used Helmi's WM6 (http://wiki.xda-developers.com/index...angel_WM6_Home) to upgrade from WM2003SE and everything was working beautifully!
I was absolutely LOVING the new software until my device just stopped accepting the passcode that I had been using for 2 years. What I don't understand is I had to use the passcode a few times after the upgrade and all was fine. What could have happened for it to suddenly change by itself (because I know it wasn't me)?
Someone at the PocketPCAddicts forum suggested that I locate an original factory ROM to wipe out everything on the device and try again from scratch. I've searched the web looking for such a beast and can't find one (since the manufacturer/carrier no longer support it).
Can someone here help?
Debbie
Had the same problem...
Hi Debbie,
Same thing happened when I upgraded from WM2003 to the WM6 ROM. Unfortunately there was no solution and I just ended up disabling the password to ensure I never got stuck.
If you ever stumble upon a solution that works for you, I'd be happy to hear about it!
I'm about to try out the latest WM6.11 and hope it will have that particular issue solved - I'll let you know.
Ken
if you press and hold power+record+camera the same time and then reset you get to the boot loader.
you will see the 3 options, which i have fogotten, but if you put in the same options as instructions tell you after flashing a new rom, then push the mail button i believe, it will format you memory and you will be able to get back in again.
i had the same problem where i was locked out and i did that and just sync'd again to get back to my positon prior getting locked out.
hope that helps
Thanks, I will try it again.
Should I be able to simply repeat those steps, or should I start from the beginning? I don't have the device with me right now.
Thanks again,
Debbie
follow the instructions after the flashing the rom stage all the way to the end.
you choose to format memory on the gray screen with 3 options.
i flashed the wm6.1(5.2.19716) several days ago, and tested in several situations, my BA can remember the pw now, thanks for the hardwork of rom maker.
Thanks! (Now Internet Problem)
I got it to finally work, after getting a 3rd hand to help in the key combination/timing.
Only problem now is that my SX66 no longer connects to the Internet. Tried every setting/CAB I could find and no dice. AT&T tech and advanced tech support didn't help and I was told that the OS may have corrupted the connectivity.
Should I try loading another WM6 version?
Thanks again,
Debbie
Hello, today I got my Amazon Kindle Fire! After starting an connecting to my Wifi network, I made an update, wich was available! But after installing the update I can´t find any Wifi-network! Also tried the factory reset, but didn´t work!
Can anybody help me? Is it possible to downgrade or something else??
Thx Chris
masterc1111 said:
Hello, today I got my Amazon Kindle Fire! After starting an connecting to my Wifi network, I made an update, wich was available! But after installing the update I can´t find any Wifi-network! Also tried the factory reset, but didn´t work!
Can anybody help me? Is it possible to downgrade or something else??
Thx Chris
Click to expand...
Click to collapse
Try contacting tech support they might have something for you to flash. And if they do, you should post the files and process here. Unfortunately without solid kernel, or recovery information there's little we can do.
Sent from my SPH-D710 using xda premium
Hopefully, cause I don´t want send it back
After chatting with Amazon, the problem wasn´t solved! But I looked a bit more on the Amazon Homepage and found where I can download the Software Update to 6.1:
Download Link
And here is the instruction:
http://www.amazon.com/gp/help/customer/display.html/ref=hp_k6_updatesi?nodeId=200790620
I will try it now and report what happends!
I think you already have that don't you?
When I got my KF, it immediately before I did anything updated to that version.
Code:
Current Version 6.1_user_2017120
Yes I have the one but I´ll try to run the update again manuelly, or do you think t wont work?
Masterc, didn't you say in another thread that you are in Austria?
You should mention that here if it is the case as it might affect the responses you get.
Yes thats true, but Wifi worked before I downloaded and installed the update! It also showed my name... the Amazon support told me it should work abroad..
I tried to install the update again, but it didn´t solve the problem.
So after playing around a while, the network pops up (yeahh) but when I enter the (right) passwort it always shows:
Error in conncection
unable to connect to selected access point. Please check the password you have provided
the kindle found my hotspot from my galaxy note (without password) and it connected just one time for arround 10 seconds..
Now I can´t connect again... quite intressting
Hopefully it is not the hardware - but I don´t think so otherwise I couldn´t download the update.
Hello.
I'm sorry if it has been already discussed before, but i couldn't actually find a solution for this in here.
I got a brand new U8800 (2.2). The WIFI was working properly.
So i installed the official 2.3.5 version required to get Aurora installed. At this time i couldn't enable WIFI anymore. I did try to wipe everything more than once before and after upgrading, same story.
I saw people saying that it might be a missed IMEI problem, but i didn't lose it, but the MAC addresses for WIFI and BT are "Unknown".
After root the phone i tried to set the MAC manually using terminal emulator, and it didn't work either.
Upgrading to Aurora also didn't solve the problem, still can't get either Wifi or BT enabled.
Is there anyone who could actually solve it?
Thank you
If the MAC address for wifi and bluetooth shows 'unknown' that indicates a configuration problem because of a somehow faulty update. I do not know how to solve this problem, but in case there is no quick solution I suggest that you install the official Huawei-Gingerbread-ROM and have the unit returned then.
It is not likely that this problem occurs on the next device too - as long as the file you downloaded (the huawei update) is not corrupt. As long as you can unzip it without any error message the file should be alright and the update process should not break anything. If you know that your harddrive is very old and you believe that this could be the problem, get this checked out.
XphX
search in the forum i think there is a way to put again mac adress again with some tools... but 4 that you need to have a backup of them...
Hi all,
first of all I apologize for my English (I'm Italian).
The last week i have update my GT-I9505 through the Kies.
After update Wifi and Bt do not have more work, I state that the phone did not root or custom rom.
When I try to turn on Wifi or Bt, the icon lights up for a few seconds and then go off, without giving me a chance to connect.
I tried to redo the update, I tried to install an older version, but with the new protection system is impossible.
At the end I even tried to root, install recovery and custom rom, but I did not get positive results.
Now I have installed the latest firmware 4.3 taken from SamMobile, but BT and Wifi not working yet
Do you have any advice to solve the problem?
Thank you all.
Hello
I have a Yotaphone 2 running android 5.0. I have a huge problem with the device which is, that the phone reboots automatically all by itself after the screen turns off. The screen timeout is set at 1 minute and once the screen goes off, the phone reboots! I don't know what the problem is but its making me crazy!
Note: The phone does not reboot if the screen doesn't turn off. So I changed the screen timeout to 30minutes. Also note that Wi-Fi doesn't start immediately. It doesn't even start most of the time and is stuck at "turning on"! And also, the phone isn't detecting my SIM Card!
Hope someone can solve my problem.
Wow, seems a lot of problems here. However you provided very few info about your phone.
1) Where did you buy it?
2) What have you done after you opened it, OTA? Which firmware was installed?
3) Have you tried factory reset by wiping data in the stock recovery? (Accessible with Vol+ and Power)
4) Have you tried to flash from scratch the RU .124 firmware with YotaFlasher?
5) The phone was behaving normally before or it's doing this as soon as you started using it?
I got the phone as a gift
TheArt. said:
Wow, seems a lot of problems here. However you provided very few info about your phone.
1) Where did you buy it?
2) What have you done after you opened it, OTA? Which firmware was installed?
3) Have you tried factory reset by wiping data in the stock recovery? (Accessible with Vol+ and Power)
4) Have you tried to flash from scratch the RU .124 firmware with YotaFlasher?
5) The phone was behaving normally before or it's doing this as soon as you started using it?
Click to expand...
Click to collapse
-The phone was a gift from "Aramex Company".
-Yes, I have factory reset it! Note: It wasn't possible to reset it from settings because it would always get stuck in "Shutting Down" phase and nothing would happen. So I hard reset it.
-I found something strange going on though. Whenever I reset it, It would restart (after the reset is over) and say that "ANDROID IS UPGRADED TO 5.0".
I think it is upgrading by itself to 5.0.
-No, I haven't tried any flashing.
-Yes, the phone was working fine for a while and then started behaving like this!
Cheers!
(Thank You for your support and attention by the way)
Video
Hello!
I have made a video showing what the problems are! Please give me your e-mail so that I can send you the "Dropbox" link to the video.
Thank You!
I think the first thing to do here is to flash a clean firmware (RU or EU) on your phone via YotaFlasher, search here on xda how, and then report back if it's happen again! Seems that the firmware it was shipped with wansn't so stable.
Flashed it!
TheArt. said:
I think the first thing to do here is to flash a clean firmware (RU or EU) on your phone via YotaFlasher, search here on xda how, and then report back if it's happen again! Seems that the firmware it was shipped with wansn't so stable.
Click to expand...
Click to collapse
Hey!
As you had prescribed, I flashed it! First I flashed it with Android 5.0.0-ME1.1.60 and after opening the phone I used it for a while and the phone was same as before flashing! There was no difference at all! The phone was restarting on turning screen off as usual, the WiFi wasn't turning on, and the SIM wasn't being recognized!
But then I flashed it with Android 4.4.3-S01-003-ME1.0.3.61a and the phone is still rebooting by itself upon switching the screen off and the WiFi problem still persists! The WiFi just simply won't turn on. It's stuck at "turning on"! The SIM isn't recognized either! Also, the phone is restarting from the inside now (It wasn't restarting before. I had to keep the power button pressed every time I wanted to restart)! But NOTE that the phone still cannot be just shut down, it can only be restarted!
I don't know what to do!
Cheers
can you please help me find 4.4.3-S01-003-ME1.0.3.61a firmware. i tried yotaflasher and i cant make the program work. it exits close itself. i couldnt find any firmware folder in yotadevices ftp too. can you help me found the spesific firmware please?
Why are you unable to make yotaflasher work
lgk350tr said:
can you please help me find 4.4.3-S01-003-ME1.0.3.61a firmware. i tried yotaflasher and i cant make the program work. it exits close itself. i couldnt find any firmware folder in yotadevices ftp too. can you help me found the spesific firmware please?
Click to expand...
Click to collapse
Hi lgk350tr,
Why are you unable to make yotaflasher work, it is a pretty simple application. Have you tried to see instruction videos on YouTube on how to use it? Instructions are also available on XDA Developers' website. ( https://forum.xda-developers.com/yotaphone-one/general/yota-flasher-download-t3480922 )
Don't hesitate to contact, for any problem!
Cheerio
Please help..................I spent 800 USD on this phone and I can't use it
Can someone freaking help me with my phone's problem, I have spent 800 US Dollars buying that phone, and I can't even use it! It has been 6 months since I opened this thread and no one has helped me yet!
PLEASE HELP..............................................................:crying::crying::crying:
akahomeacc said:
Can someone freaking help me with my phone's problem, I have spent 800 US Dollars buying that phone, and I can't even use it! It has been 6 months since I opened this thread and no one has helped me yet!
PLEASE HELP..............................................................:crying::crying::crying:
Click to expand...
Click to collapse
Try flashing the hybrid modem mentioned in the general guide (Part 2).
Try flashing 2 times before rebooting.
If nothing helps, you could try lineageos, @angelll123 made a lengthy guide how to that in the post quoted here , also check my comment.
Is this what you mean?
tomgaga said:
Try flashing the hybrid modem mentioned in the general guide (Part 2).
Try flashing 2 times before rebooting.
If nothing helps, you could try lineageos, @angelll123 made a lengthy guide how to that in the post quoted here , also check my comment.
Click to expand...
Click to collapse
I have attached a screenshot of the Yotaphone 2 General guide page, I want to know if you are referring to the text that I highlighted in the screenshot!
Thank You
I do experience similar issue, but only recently. I haven't done anything like flashing or upgrading my phone, it started by itself .
I am experiencing reboots whenever battery drops below about two thirds of its capacity. Also, charging and handling some load prevents this.
Note that my Yotaphone has both displays damaged. Still working though.