I noticed this only or mainly happens when my phone is my pants pocket. A lot of times if my phones rings and I take it out of my jeans pants.. the answer slider just won't move and the whole screen becomes unresponsive. Sometimes I'd be able to move the red slider a little bit so I can only then slide the green one to answer.
Happened to anyone else?
Also, A question.. Why sometimes screen to answer a caller sometimes is "slide to answer" and other times it's buttons "Answer" and "End Call".. something?! Randomly?!
CyberPunk7t9 said:
Also, A question.. Why sometimes screen to answer a caller sometimes is "slide to answer" and other times it's buttons "Answer" and "End Call".. something?! Randomly?!
Click to expand...
Click to collapse
Slide to answer is when your screen is locked, buttons Answer and End Call is when your screen is not locked (ie you are currently using your phone)
holtenc said:
Slide to answer is when your screen is locked, buttons Answer and End Call is when your screen is not locked (ie you are currently using your phone)
Click to expand...
Click to collapse
uha. got it.
about the problem. anybody else had it?
yeah i had that problem too
>.<
I get this issue from time to time also, do you use widgetlocker by chance?
joeryu said:
I get this issue from time to time also, do you use widgetlocker by chance?
Click to expand...
Click to collapse
No. I'm not using widget locker.
Does the problem happen mostly or only if you were getting the Atrix out of your pocket to anwer? I'm thinking it's got something to do with touching the screen while the phone is ringing.
Related
So, I have PocketShield installed and it's set to slide or light unlock and answer. Quite often when I get a call it takes so long to unlock and answer, the person is gone...
There are maybe a few options -
1) I've installed and uninstalled so much stuff, maybe I need to start fresh? I have noticed the HD is a little 'laggy' now. Should I hard reset and install things back on slowely, testing it's responsiveness as I go?
2) Maybe I should switch to S2U2? I used this for a long time on my Kaiser, but have been concerned by everyone saying it drains battery power.
3) Do I need a screen lock program? The device only wakes up on a phone call and now you have a slide to answer/ignore anyway. Do the hardware keys do anything at this point? Am I safe to carry it round in my case without a screen lock?
Does anyone else suffer from this, or just me?
Thanks for any help/advice in advance.
Having the same issue. Sometimes my slide option simply doesn't work first few attempts. My solution is to use the "answer call" key beneath the main screen until this gets resolved.
S2U2 works like a charm on the HD and it doesn't draw additional battery as far as I have seen over the past few days.
When u have a call, u don't need to slide so you unlock the device then accept/reject the call.
Depends on what you have set, you can either have the original accepting/rejecting HTC screen poping up to take/reject your calls,
or you can set it so u have a new slider appearing on the wallpaper of S2U2 to accept/reject the calls
Try it, you won't regret it guys.
Well, yesterday I hard reset my HD and installed just the stuff I wanted. I've gone back to S2U2 and everything seems much much better so far. The only annoying thing is sometimes the phone wakes in landscape mode still, even though it's set to not rotate in Gyrator (and doesn't when it's woken, it stays in whatever it is in.)
Whats the difference between S2U2 and the phones default slide to answer phone ?
In other words, why install S2U2?
Its a very well presented Screen Lock, that's why. The question is just how to go from that to answering a call...
Id I have S2U2 installed, and a call comes in on my HD, what happens? does s2u2 take over from the default "slide to answer" system?
Yes it does. I think the problem I had was it wasn't doing that properly before hand. They were obviously conflicting with each other and I was struggling to answer calls.
gt112 said:
Whats the difference between S2U2 and the phones default slide to answer phone ?
In other words, why install S2U2?
Click to expand...
Click to collapse
Well S2U2 will lock your phone screen and buttons so you do not start by mistake an application or a phone call when the device is in your pocket.
Even if by mistake u click on the power on button, ur device is still locked until u unlock it using a slider like on the i-phone.
It allows u to display a wallpaper of your choice, different then the one on your today screen or in TF3D. It allows u to display clock date, network signal, tasks, missed calls, SMS, etc ...
Try it, it's free and very nicely designed
I tried to use S2U2 and found that just like every other locker it is behaving wrongly after a call - it leaves the device unlocked! So if I listen to music and get a phone call I'll have to pull it out of the pocket to lock again. There is a silly option to lock after each call of course, but this is just stupid - I just want the device to stay locked until I unlock it - how difficult is this?
Funnily, the only locker behaving properly is the stock Windows one, but it has a backlight bug and switches the device to Home screen.
It's just amazing how nobody can do such a basic function right.
vangrieg said:
I tried to use S2U2 and found that just like every other locker it is behaving wrongly after a call - it leaves the device unlocked! So if I listen to music and get a phone call I'll have to pull it out of the pocket to lock again. There is a silly option to lock after each call of course, but this is just stupid - I just want the device to stay locked until I unlock it - how difficult is this?
Funnily, the only locker behaving properly is the stock Windows one, but it has a backlight bug and switches the device to Home screen.
It's just amazing how nobody can do such a basic function right.
Click to expand...
Click to collapse
Just tried it few seconds before posting, called myself from the office phone, answered the call using the slider is S2U2, the screen turned off, I ended the call by pressing on the end call button on my HTC touch HD, and the S2U2 screen lock was there, the device was still locked.
It works perfectly with the touch HD.
I know this question has been asked already but has anybody yet found a way to disable to hardware buttons whilst the phone is locked to prevent accidently answering or rejecting an incoming call whilst removing the HD2 from your pocket or pouch?
I have tried various software, tweaks that i found whilst searching this site but cant get any of them to work
Had my HD2 since Tuesday and love it, just need to find a way to stop answering the phone when taking it out of the pouch!
This is very important thing and I hope someone will find a solution soon.........
hi
there are solutions, pokectshield and s2u
iosu
I too need this, I have tried the ones mentioned but they either dont work or they have their own slide ontop of the HTC slide, so 2 in effect.
Would be nice to have one that just disables the button!
S2u2 and pocket shield did not lock the volume buttons for me so when in pocket they were still pressed annoying me a lot when I listen to my tunes. Pressing any other button was bringing the screen back to lock so in other words no difference at all.
iosub said:
hi
there are solutions, pokectshield and s2u
iosu
Click to expand...
Click to collapse
How is this done with S2U? I installed it and the buttons still worked.
My experience is that if anything the bigger slider caused more chance of it unlocking accidentally, if the phone moves and the screen rubs against your leg. Wasn't an issue with a resistive screen but mine was worse for 'unlocking itself' with S2U. So far it texted a nonsense sms to an ex and rang my mum all by itself - both dangerous!
I always put it in that way yo help protect the screen from being knocked accidentally.
There is a perfectly working solution for this here:
http://forum.xda-developers.com/showthread.php?t=556801
Simple and nice, install and soft reset and never worry about pressing the button while taking your phone out of the cover.
umiss said:
There is a perfectly working solution for this here:
http://forum.xda-developers.com/showthread.php?t=556801
Simple and nice, install and soft reset and never worry about pressing the button while taking your phone out of the cover.
Click to expand...
Click to collapse
That application is for locking the hardward buttons when in a call, not when the phone is locked, or am I missing something?
Cret said:
How is this done with S2U? I installed it and the buttons still worked.
My experience is that if anything the bigger slider caused more chance of it unlocking accidentally, if the phone moves and the screen rubs against your leg. Wasn't an issue with a resistive screen but mine was worse for 'unlocking itself' with S2U. So far it texted a nonsense sms to an ex and rang my mum all by itself - both dangerous!
I always put it in that way yo help protect the screen from being knocked accidentally.
Click to expand...
Click to collapse
I tried S2U2 also and having no problem disabling the call answer and call end buttons when there is incoming call.
johncmolyneux said:
That application is for locking the hardward buttons when in a call, not when the phone is locked, or am I missing something?
Click to expand...
Click to collapse
It's quite the other way around. At least the cab I installed. Hardware buttons work in call, but when the phone is locked and there is an incoming call the buttons are locked (to prevent the accidental pressing).
Hence, not disabling anything you actually would like to use.
EDIT: This is what the description says:
"InCall Lock will temporarily disable Send (aka Talk, Green) and End (aka Red) hardware buttons when you receive an incoming call in order to prevent accidental call pickups/rejects while you are pulling your device out of your pocket. All other hardware buttons are untouched."
So the name can be obfuscating, but as the description says, the yes/no hardware buttons are disabled during an incoming call (prior to answering), but active during the actual call.
chongbh said:
I tried S2U2 also and having no problem disabling the call answer and call end buttons when there is incoming call.
Click to expand...
Click to collapse
This thread is not about disabling buttons when there is an incoming call.
I can't believe there is not solution for this problem yet !
Xeon said:
I can't believe there is not solution for this problem yet !
Click to expand...
Click to collapse
I don't know if I'm misinterpreting the question, but there is a solution for disabling the hardware keys to prevent accidental answer/reject of an incoming call which I've linked to earlier in this thread.
I have that solution installed right now, and when someone is calling I cant answer or reject by pressing the hardware buttons, I have to use the slider on the touch screen.
umiss said:
I don't know if I'm misinterpreting the question, but there is a solution for disabling the hardware keys to prevent accidental answer/reject of an incoming call which I've linked to earlier in this thread.
I have that solution installed right now, and when someone is calling I cant answer or reject by pressing the hardware buttons, I have to use the slider on the touch screen.
Click to expand...
Click to collapse
What I want is to prevent the keypad from waking up the device unless you press the power key.
Cret said:
How is this done with S2U? I installed it and the buttons still worked.
My experience is that if anything the bigger slider caused more chance of it unlocking accidentally, if the phone moves and the screen rubs against your leg. Wasn't an issue with a resistive screen but mine was worse for 'unlocking itself' with S2U. So far it texted a nonsense sms to an ex and rang my mum all by itself - both dangerous!
I always put it in that way yo help protect the screen from being knocked accidentally.
Click to expand...
Click to collapse
chongbh said:
I tried S2U2 also and having no problem disabling the call answer and call end buttons when there is incoming call.
Click to expand...
Click to collapse
umiss said:
I don't know if I'm misinterpreting the question, but there is a solution for disabling the hardware keys to prevent accidental answer/reject of an incoming call which I've linked to earlier in this thread.
I have that solution installed right now, and when someone is calling I cant answer or reject by pressing the hardware buttons, I have to use the slider on the touch screen.
Click to expand...
Click to collapse
No one here wants buttons to be disabled when call is incoming. We just want buttons to be disabled when you put device in to sleep.
Go on test it. Put music on in music tab or WM player or any other with your headphones or without. Press red button to put device in to sleep mode (use manual lock if you have disabled auto lock). Press volume buttons and see what happens.
If you have s2u2 or pocket shield or nothing effect is the same.
ruscik said:
No one here wants buttons to be disabled when call is incoming. We just want buttons to be disabled when you put device in to sleep.
Go on test it. Put music on in music tab or WM player or any other with your headphones or without. Press red button to put device in to sleep mode (use manual lock if you have disabled auto lock). Press volume buttons and see what happens.
If you have s2u2 or pocket shield or nothing effect is the same.
Click to expand...
Click to collapse
I'm sorry but I can't agree with you. The thread clearly states in the first post
"has anybody yet found a way to disable to hardware buttons whilst the phone is locked to prevent accidently answering or rejecting an incoming call whilst removing the HD2 from your pocket or pouch?"
The answer to this is yes, and I've linked to the solution previously.
ruscik said:
No one here wants buttons to be disabled when call is incoming.
Click to expand...
Click to collapse
Sorry buddy but you're quite wrong. That's EXACTLY what I want and apologies if I wasn't crystal clear in describing it - I may not have been since I also want the same as you.
Umiss - I'm going to go and check out that cab you mentioned because if that really works then brilliant!!!!
Cret said:
Sorry buddy but you're quite wrong. That's EXACTLY what I want and apologies if I wasn't crystal clear in describing it - I may not have been since I also want the same as you.
Umiss - I'm going to go and check out that cab you mentioned because if that really works then brilliant!!!!
Click to expand...
Click to collapse
so how do you want to answer a call with this cab installed and enabled?
i also would like to prevent unwanted presses....but i do want to reject or accept a call on some way, without mispressing a button.
When a call comes in the screen is enabled so I just slide to answer or reject. It won't happen by accident in all likeliness, and removes the huge annoyance of the hardware buttons being accidentally pressed. It's the one thing that majorly pisses me off about this awesome phone.
If they wanted to, they could simply do a cab file that disables them perhaps when the proximity sensor detects the face of the phone is against something. That would be good too, unless I'm not considering some factor.
Hmmm, I've just installed that app and it seems to only partly work.
The reject call button locks perfectly but the answer button does not lock so it can still be pressed. I also managed to press the home button and get to the Sense screen once, but when I tried this a second time it didn't do it, so I think it might be a bit buggy.
A definite step in the right direction though, at least I now have fewer buttons that can be pressed accidentally!
Hi All
On all my previous HTC devices when I was switchin the device off with power button none of other buttons were active. So pressing them did nothing. Only way to wake the device up was to press power button.
On Leo that is not the case. Now I remember that option was somewhere in windows but it appears to not be there anymore. When I have phone in pocket volume still works so it goes up and down. It also today somehow managed to unlocked it self when in poclet of my motorbike leathers including sliding the screen to unlock. Then it started calling hte wrong person while I was on m-way. Not a good thing.
Any idea where that option is?!
Only way i have found around this is to install S2U2 and set slide to answer as only way to answer phone. This disables buttons when there is a call. There is also a cab file you can install to set s2u2 as the default unlock screen.
ruscik said:
Hi All
On all my previous HTC devices when I was switchin the device off with power button none of other buttons were active. So pressing them did nothing. Only way to wake the device up was to press power button.
On Leo that is not the case. Now I remember that option was somewhere in windows but it appears to not be there anymore. When I have phone in pocket volume still works so it goes up and down. It also today somehow managed to unlocked it self when in poclet of my motorbike leathers including sliding the screen to unlock. Then it started calling hte wrong person while I was on m-way. Not a good thing.
Any idea where that option is?!
Click to expand...
Click to collapse
If you are unlocking the lock screen, by sliding the slider all the way to one side, whilst it is in your pocket, then I suggest you get a priest to exorcise your pocket. This simply is not possible without your intervention.
I would suggest that you have come across the common (and very documented on this forum) problem of the lock screen not actually locking your device fully.
This is a known problem, with a 100% effective solution. Before you start a journey (which is obviously where this is most problematic for you) click start and then lock (the bottom left soft key). This re-enables the hardware lock. After that, it will work.
lindsaydr said:
Only way i have found around this is to install S2U2 and set slide to answer as only way to answer phone. This disables buttons when there is a call. There is also a cab file you can install to set s2u2 as the default unlock screen.
Click to expand...
Click to collapse
Will try s2u2 then
johncmolyneux said:
If you are unlocking the lock screen, by sliding the slider all the way to one side, whilst it is in your pocket, then I suggest you get a priest to exorcise your pocket. This simply is not possible without your intervention.
I would suggest that you have come across the common (and very documented on this forum) problem of the lock screen not actually locking your device fully.
This is a known problem, with a 100% effective solution. Before you start a journey (which is obviously where this is most problematic for you) click start and then lock (the bottom left soft key). This re-enables the hardware lock. After that, it will work.
Click to expand...
Click to collapse
My pocket is ghost free, as it is made of leather and in rain can get a bit moist it does work a bit on the screen.
Also if I select start and click lock all buttons still work.
ruscik said:
if I select start and click lock all buttons still work.
Click to expand...
Click to collapse
Yes, but you need to slide to unlock if the lock screen is working correctly. This will not happen by accident, in your pocket.
You can only unlock your phone with the hardware buttons if the known issue of the lock screen rears it's ugly head.
Doing what I said, before each journey, will make sure that you cannot unlock the screen with a simple button-press.
Since installing S2U2 a few days ago I've had even worse problems with ghost unlocks than before.
Previously the only issue was accidentally cutting calls off, but with S2U2 I had a text from a friend on Friday asking if I was drunk. Somehow, whilst locked in my pocket it unlocked and sent a gibberish sms!
Then today, it also somehow unlocked in my pocket and dialled my mum!
I'm just glad I wasn't playing Call of Duty when it happened or she would have just heard "Sh1t!!! You cheating f***!!! WTF??? You..... FFS!!!!" etc
But seriously - I love S2U2 from previous winmo phones but it's made my HD2 worse so I've uninstalled it tonight sadly.
Cret said:
I'm just glad I wasn't playing Call of Duty when it happened or she would have just heard "Sh1t!!! You cheating f***!!! WTF??? You..... FFS!!!!" etc
Click to expand...
Click to collapse
You're not as bad as me when I play COD/MW2 then, or you would have made several references to "the C word" lol
Cret said:
Since installing S2U2 a few days ago I've had even worse problems with ghost unlocks than before.
Previously the only issue was accidentally cutting calls off, but with S2U2 I had a text from a friend on Friday asking if I was drunk. Somehow, whilst locked in my pocket it unlocked and sent a gibberish sms!
Then today, it also somehow unlocked in my pocket and dialled my mum!
I'm just glad I wasn't playing Call of Duty when it happened or she would have just heard "Sh1t!!! You cheating f***!!! WTF??? You..... FFS!!!!" etc
But seriously - I love S2U2 from previous winmo phones but it's made my HD2 worse so I've uninstalled it tonight sadly.
Click to expand...
Click to collapse
Well it took me all but 45 min to realise my problem is still there with s2u2 but other things are even worse so back to stock lock.
I am quite certain that option must still be in there. It was a tick box that stated lock all buttons except power button.
johncmolyneux said:
You're not as bad as me when I play COD/MW2 then, or you would have made several references to "the C word" lol
Click to expand...
Click to collapse
No - I'm the same exactly. I just was trying to be polite so I didn't get told off here!
Does any one knows how to disable the lock screenn when a call comes in? It is fine usually, but when a call comes in, I just want to pick it up ot ignore.
Thanks in advance.
The Lockscreen is the Incoming Screen...
Okay then how do I disable it?
Sent from my X10a using the XDA mobile application powered by Tapatalk
Bikram said:
Okay then how do I disable it?
Click to expand...
Click to collapse
You don't. As wertzius already said, when a call comes in the lock screen is no longer the lock screen but the incoming call screen: the "answer" button is the slider, the "ignore" button is the power button. Therefore, you can't disable that!
Further to lornova's answer: You can silence the call ringer/vibrate using the top of the two volume buttons on the side.
power button declines the call wow, three weeks and I've actually only just realised this.
haha cheers!
lornova said:
You don't. As wertzius already said, when a call comes in the lock screen is no longer the lock screen but the incoming call screen: the "answer" button is the slider, the "ignore" button is the power button. Therefore, you can't disable that!
Click to expand...
Click to collapse
well thats strange, when i get a phone call, i first need to "slide to unlock" to see who is calling me, and then "slide to answer" ta answer ?
so to answer a call i need 2 "Slides" is that normal ?!
lestander said:
well thats strange, when i get a phone call, i first need to "slide to unlock" to see who is calling me, and then "slide to answer" ta answer ?
so to answer a call i need 2 "Slides" is that normal ?!
Click to expand...
Click to collapse
Not for me... I just slide once.. shows the incoming call details as soon as the phone starts to ring..
Hi, i realize the answering incoming call mode keep randomly change. Sometimes i get touch to answer/reject. Sometimes i get slide to answer/reject. Can this phone set it up to one option only ?
Slide to answer/refuse if the screen is locked, tap to answer if it's unlocked. I don't think it's something we can change.
TheKingOfPain said:
Slide to answer/refuse if the screen is locked, tap to answer if it's unlocked. I don't think it's something we can change.
Click to expand...
Click to collapse
oh i see. thanks for the information.