Related
My dad bougth his Wave II (S8530) in asia, and wanted me to put Norwegian language (europe firmware) on it.
I have tried with S8530XEJK6, S8530XEJL2, S8530XXJK3 and S8530XXJK9. In MultiLoader_V5.64 I put all the files where they were supposed to be but every time i tried to upgrade/change firmwares it had an error. Sometimes on the first one, sometimes on the others. The annoying part was when all succeeded except the last one... I thought it worked...
Now it wont charge or startup. I'm pretty sure it wont start up because it didnt finish the upgrade, but why won't it charge? I have to put the battery in a Wave 1 (S8500) to charge it if i want to continue.
What did i do wrong? And why wont it charge? Anyone PLEASE have a fix for this?
Thanks
... hello please follow the link http://www.multiupload.com/AS83W2F1W4 the firm has the CSC preconfig for Europe as you asked ... I hope I have done something pleasant ... soon psycoy
pass: sampro.pl
Hi! Thanks, but I tried this and I just got:
Error : Amss Write [8.2s]
Have any idea what im doing wrong?
Edit: Tried it again, and now:
Error : Rsrc1 Write [11.1s]
ballah said:
Hi! Thanks, but I tried this and I just got:
Error : Amss Write [8.2s]
Have any idea what im doing wrong?
Edit: Tried it again, and now:
Error : Rsrc1 Write [11.1s]
Click to expand...
Click to collapse
hey friend you write this error is given when you try to write on a different device ... I'm sorry for your situation ... to make good by psycoy ...
... I spoke with the beta service and suggested I drive them to your device that are attached ... then retry the upgrade ... by psycoy ...
Hi thanks for the tips, but I already had that driver.
I reinstalled it just in case, but still I get:
Error : Rsrc1 Write [20.2s]
Is there something to do with a spesific firmware? Since I had an Asian firmware, and I need a special on for the European?
Or do i have to download a spesific asian rom before going over to European?
Thanks for your help.
It's probably not a firmware issue, but circumstantial.
Try to find another microUSB cable, and if it doesn't work, find another computer to retry flashing with.
Also, DO NOT touch the Boot partition for any reason! If the flash process stops while updating the bootloader, you'll make a real brick from your phone. As long as the bootloader is intact (i.e. you can access Download Mode), your phone can be revived.
Download Start Ch[0]
BootLoader 1703.9KB OK[0.9s]
Dbl 281.5KB OK[0.8s]
Wait reset !!
Error : Amss Write [10.4s]
I tried a new cable, but that doesnt seem to be the problem. Usually its the Rsrc1 that stops, but it's so random.
It goes into download mode fine, so it seems bootloader is. But i just cant seem to get the full firmware to download without it stoping :/
Please use MultiLoader v5.62.
Good Luck !
Thanks, I've tried that too, but didnt work with Rsrc1
Update:
Ok.. now I tried it without Rsrc1 and it worked!
But I didnt get the norwegian language i wanted.
Do i need Rsrc1 ?
I'm guessing norwegian isnt on these phones yet.
Anyways thanks for your help, all I had to do was leave Rsrc1 out of it.
Anyone know what thats for? Hopefully not important, since the phone is working
Rsrc1 is important file.
CSC contains Language and other regional settings.
Hi Guys,
This is my 1st Thread on xda, hope i am Sharing in correct section. And English isn't my 1st language.
Few days ago i Bricked My N910F during the Odin Flash, It rebooted and never booted again, Still in that state, Tried almost everything posted here and on other forums. Debrick image Creator etc. in the process i found an official guide from Samsung for Note 4 International models, ( It didn't helped me yet), Sharing here so somebody else get benefit from this and give life to Note 4.
There is a PDF guide and a pit file for Note 4.
1) Boot Recovery Guide_Qualcomm_APQ8084 (Includes SM-N910F) Rev 3_0
2) APQ8084_boot_recovery_v2.pit
Please share you experiences here.
Anybody? need help, i am missing something in this guide, unable to recover my N910F
Wish this was posted last week, would've tried it out before sending my phone away to be debricked by jtag
---------- Post added at 06:16 PM ---------- Previous post was at 06:10 PM ----------
[email protected]% said:
Anybody? need help, i am missing something in this guide, unable to recover my N910F
Click to expand...
Click to collapse
Have you installed the driver?
ylmcc said:
Wish this was posted last week, would've tried it out before sending my phone away to be debricked by jtag
---------- Post added at 06:16 PM ---------- Previous post was at 06:10 PM ----------
Have you installed the driver?
Click to expand...
Click to collapse
Which Driver you are talking about?, Yes, all drivers already installed for odin, Created Sd card successfully, but no luck. Which Note 4 model do you have, And what was the problem with that. I posted/Shared the guide here as soon as i get that.
Regards
[email protected]% said:
Which Driver you are talking about?, Yes, all drivers already installed for odin, Created Sd card successfully, but no luck. Which Note 4 model do you have, And what was the problem with that. I posted/Shared the guide here as soon as i get that.
Regards
Click to expand...
Click to collapse
Sorry didnt read who was op lol mine is a sm-n910f flashed a pit file and it refused to even show any life but when plugged in would come up as qualcomm hs-usb qdloader 9008
Same problem here. Did you solve your hard brick?
Same problem here. How you created the SD Card ? Can you help me creating it ? I am unable to understand the meaning of "normal device". Does this means i need another working note 4 ? Or any other device would work ? Also do i have to install completely new software to the "normal device" before creating the sd card ?
[email protected]% said:
Which Driver you are talking about?, Yes, all drivers already installed for odin, Created Sd card successfully, but no luck. Which Note 4 model do you have, And what was the problem with that. I posted/Shared the guide here as soon as i get that.
Regards
Click to expand...
Click to collapse
Same problem here. How you created the SD Card ? Can you help me creating it ? I am unable to understand the meaning of "normal device". Does this means i need another working note 4 ? Or any other device would work ? Also do i have to install completely new software to the "normal device" before creating the sd card ?
alpha110 said:
Same problem here. How you created the SD Card ? Can you help me creating it ? I am unable to understand the meaning of "normal device". Does this means i need another working note 4 ? Or any other device would work ? Also do i have to install completely new software to the "normal device" before creating the sd card ?
Click to expand...
Click to collapse
Normal means, a working device - similar model.
Better to do a factory data reset on working phone (after backing up) and create debrick image (it reduces the time and space needed on SD card).
If it does work, do share your image to others.
21031980 said:
Normal means, a working device - similar model.
Better to do a factory data reset on working phone (after backing up) and create debrick image (it reduces the time and space needed on SD card).
If it does work, do share your image to others.
Click to expand...
Click to collapse
Alrighto !! Ill definitely do it ! But right now i am figuring a way to grab a similar model !
alpha110 said:
Same problem here. How you created the SD Card ? Can you help me creating it ? I am unable to understand the meaning of "normal device". Does this means i need another working note 4 ? Or any other device would work ? Also do i have to install completely new software to the "normal device" before creating the sd card ?
Click to expand...
Click to collapse
alpha110 said:
Alrighto !! Ill definitely do it ! But right now i am figuring a way to grab a similar model !
Click to expand...
Click to collapse
nimms said:
Normal means, a working device - similar model.
Better to do a factory data reset on working phone (after backing up) and create debrick image (it reduces the time and space needed on SD card).
If it does work, do share your image to others.
Click to expand...
Click to collapse
samsfan said:
Same problem here. Did you solve your hard brick?
Click to expand...
Click to collapse
ylmcc said:
Sorry didnt read who was op lol mine is a sm-n910f flashed a pit file and it refused to even show any life but when plugged in would come up as qualcomm hs-usb qdloader 9008
Click to expand...
Click to collapse
[email protected]% said:
Anybody? need help, i am missing something in this guide, unable to recover my N910F
Click to expand...
Click to collapse
Hey guys, any of you guys fixed this?
I used the guide posted above but odin is just stuck when I flash the pit + bootloader...
using an sgs 2 mini to fix it
Debrick has already been created :
http://forum.xda-developers.com/showthread.php?p=69319580
Reporting via N910G.
I flashed my note 4 n910f BOG with the Kyubi ROM Port N5 ( http://forum.xda-developers.com/note-4/snapdragon-dev/kyubi-rom-port-n5-n910f-coj3-v5-t3254964 ) using odin but after that my note 4 starts to lag and reboot several times so i wanted to reflash it with the stock rom 5.1.1 BOG found in sammobile but even after that my note 4 lags a lot and reboots by itself and one day it stops and never boot at first I though that my motherboard was bricked but when i plug it to PC it shows that there is a RELINK HS-USB QDLoader 9008 mounted under Ports (COM and LPT) in device manager.
I need a debrick.img for my N910F to resolve this problem using an SD card 32gb.
Please help.:crying::crying::crying::crying::crying::crying:
Brother did u find anything i have the same problem i was looking for a month and i didnt find anything !
I have the same thing, the exact same thing since a couple of weeks and cant find a solution. All i get is mmc read error. Cant flash a stock rom either. Some help would be appriciated.
Thanks in advance
TheOne741 said:
I have the same thing, the exact same thing since a couple of weeks and cant find a solution. All i get is mmc read error. Cant flash a stock rom either. Some help would be appriciated.
Thanks in advance
Click to expand...
Click to collapse
A friend come to me with a note 4 exactly like your with emmc read error. I tried flashing stock rom but no result. After that i flashed stock rom 4 files version with PIT and repartition ... but nothing. The trick with what i succeded was to flash stock rom with odin 3.10.6 and when the flashing process starts just tap the screen from 10 to 10 seconds until the process succeded. I know it seems stupid but this saved the phone. Homewer after 3 weeks my friend called me and said that the phone completly died. And one more tip, remove and put back battery between each attemp to flash stock rom with odin.
I think this can help us... Just take the bootloader from here and the pit and guide from attachments and try it. it may save your phones.
One more thing.. Here are the .SDC files for direct sdcard boot repair. So choose what sdc you need and try to flash.
The flash procedure is this:
1.Put the .SDC file to your sdcard (sdcard must be formated as FAT32 and must be SDHC max 16GB)
2.On the phone press VOLUME DOWN + HOME + POWER
3.If all is ok the phone will display SDCARD MODE and will try to flash the phone with the file provided to sdcard
4. IF the process went ok now you have to flash the phone with odin and stock rom.
If the phone didnt boot to SDCARD Mode you will need a USB JIG that you can buy from ebay or somewhere else...
I hope this help you.
http://forum.xda-developers.com/note-4/help/hard-bricked-note-4-sm-n910f-qualcomm-t3393104
---------- Post added at 03:19 PM ---------- Previous post was at 03:17 PM ----------
The only way is that file I shared or a USB JIG.
Thank you all for your help. Today i delivered my phone to samsung for repairs in the hope that it has warrantee. Will hear from them within 2 weeks. If they wont repair within warranty i will try this. Keeping my fingers crossed.
Sent from my iPhone using Tapatalk
Maybe someone knows more than i do. Will my custom rom flashing behavior affect the longevity of my beloved phones motherboard? I tend to do that a lot. I come from an HTC where there is no lock in the boot-loader anymore and am affraid that my flashing frenzy might have broken my phone. It shouldn't play a role, should it?
scamex said:
One more thing.. Here are the .SDC files for direct sdcard boot repair. So choose what sdc you need and try to flash.
The flash procedure is this:
1.Put the .SDC file to your sdcard (sdcard must be formated as FAT32 and must be SDHC max 16GB)
2.On the phone press VOLUME DOWN + HOME + POWER
3.If all is ok the phone will display SDCARD MODE and will try to flash the phone with the file provided to sdcard
4. IF the process went ok now you have to flash the phone with odin and stock rom.
If the phone didnt boot to SDCARD Mode you will need a USB JIG that you can buy from ebay or somewhere else...
I hope this help you.
Click to expand...
Click to collapse
Do I need to burn it on SD card or just copy it and what software should I use ?
heeelp
IronDrass said:
Do I need to burn it on SD card or just copy it and what software should I use ?
Click to expand...
Click to collapse
very good question
ill try both methods ann then tell you
---------- Post added at 12:14 PM ---------- Previous post was at 12:12 PM ----------
good question
i dont eaven know how to flash it
IronDrass said:
Do I need to burn it on SD card or just copy it and what software should I use ?
Click to expand...
Click to collapse
Copy paste !
i tried both methods
neither worked for me
plus my note 4 got bricked while updateting from 5.0.1 to 6.0.1
and it has 32 gb
th file says 4.4.4 16 gb
are you sure it is the right files ?
ps im about to go to a guy wohs gonna let me try to flash the bootloader and the pid file to my sd with his working note 4
if i can ill upload the sd contant up for every body
ladres said:
i tried both methods
neither worked for me
plus my note 4 got bricked while updateting from 5.0.1 to 6.0.1
and it has 32 gb
th file says 4.4.4 16 gb
are you sure it is the right files ?
ps im about to go to a guy wohs gonna let me try to flash the bootloader and the pid file to my sd with his working note 4
if i can ill upload the sd contant up for every body
Click to expand...
Click to collapse
Did you found a solution for your Note
lol sorry for not answering
yes i did
i used the pid file with odin and wrote the bootloader to my micro sd
if anybody whats the files
let me know
ladres said:
lol sorry for not answering
yes i did
i used the pid file with odin and wrote the bootloader to my micro sd
if anybody whats the files
let me know
Click to expand...
Click to collapse
Could you elaborate on how you did this?
Also, can you upload the content on the SD if you can?
---------- Post added at 06:40 PM ---------- Previous post was at 06:34 PM ----------
ladres said:
lol sorry for not answering
yes i did
i used the pid file with odin and wrote the bootloader to my micro sd
if anybody whats the files
let me know
Click to expand...
Click to collapse
Also, if you can, Download this, install it, connect the SD Card to PC directly, choose the drive on which the SD is mounted in the "Device" option and click on "Read". It will create an img file which I can then write onto my sd card. If you can do this, it'd be a big help
ladres said:
lol sorry for not answering
yes i did
i used the pid file with odin and wrote the bootloader to my micro sd
if anybody whats the files
let me know
Click to expand...
Click to collapse
Please share those files and the method used!
I've had these same kind of symptoms for a few weeks. Then I flashed Debloated ROM v5 and got Wake lock app from the Google play and while maybr this is a work around, my phone has been flawless ever since wake lock was installed. Flashing didn't cause any problems.
ga4a89 said:
I've had these same kind of symptoms for a few weeks. Then I flashed Debloated ROM v5 and got Wake lock app from the Google play and while maybr this is a work around, my phone has been flawless ever since wake lock was installed. Flashing didn't cause any problems.
Click to expand...
Click to collapse
Bro, we're talking about hard-bricked devices. No power, no recovery, no download mode. How are we supposed to flash your ROM?
What we are looking for is a fix for hard-bricked N910F. Do you have it?
scamex said:
Copy paste !
Click to expand...
Click to collapse
Copy-paste won't work because SDC files are dedicated for ATF box and related ATF software. Don't waste our time.
Hello everybody:
I have problem with my phone (sm-g360h)
I firstly install the cm12.1 (the rom bulid from the source) then I wanted to reinstall the rom and install the CM12.1(ported rom) and the touch screen not working and back and also menu key not working and when I enter to recovery mode it take long time to enter
I try install stock rom by odin but the same problem
any one can help me?
Installing a ROM never breaks hardware, except you've installed it not properly (wrong installing method)
doesntexits said:
Installing a ROM never breaks hardware, except you've installed it not properly (wrong installing method)
Click to expand...
Click to collapse
I just install the rom you added in this thread
http://forum.xda-developers.com/galaxy-core-prime/development/rom-cyanogenmod-12-1-samsung-galaxy-t3405669
Did you follow the instructions carefully? I doubt it.
AtomR said:
Did you follow the instructions carefully? I doubt it.
Click to expand...
Click to collapse
yes ,but why back and menu key also not worke
Ah-pal said:
yes ,but why back and menu key also not worke
Click to expand...
Click to collapse
IDK. But...... Is CM12.1 booting or are you stuck on bootloop? Make the whole problem clear, then somebody can help.
doesntexits said:
Installing a ROM never breaks hardware, except you've installed it not properly (wrong installing method)
Click to expand...
Click to collapse
i too lost my touch screen! please help us fixingit
---------- Post added at 07:35 PM ---------- Previous post was at 07:32 PM ----------
AtomR said:
IDK. But...... Is CM12.1 booting or are you stuck on bootloop? Make the whole problem clear, then somebody can help.
Click to expand...
Click to collapse
actually i missed a file like properiety something which @doesntexists said to install! at first phone was soft bricked(on samsung screen display was going black slowly) after installing stock !touch is not working everything is working except touch ,home button and back including me! help me
AtomR said:
IDK. But...... Is CM12.1 booting or are you stuck on bootloop? Make the whole problem clear, then somebody can help.
Click to expand...
Click to collapse
CM12.1 booting but touch screen and soft keys not workig and the phone takes long time to boot or enter recovery mode
well I have face this error too and even I can't figure out what the problem is it so
only one way to solve this is to
give your phone to care centre .
Remember ( flash your phone with Odin and tick erase option then give your phone to care centre ) otherwise your Odin download mode say its on custom
good luck
Dreamstar said:
well I have face this error too and even I can't figure out what the problem is it so
only one way to solve this is to
give your phone to care centre .
Remember ( flash your phone with Odin and tick erase option then give your phone to care centre ) otherwise your Odin download mode say its on custom
good luck
Click to expand...
Click to collapse
No care center for samsung in country
Is the problem software or hardware?
that's happened to me too
i went to care center and they say that i need a new digitizer.
try to fix it i hope it will be back to normal mode
Hey there, got huawei p smart fig-lx1, my friend gave me to give it a try to make it work, due to some updates i believe its needs to be flashed fully, its bootloader locked, no twrp, only eRecovery, but unfortunately - "Getting Package info failed" error shows up, tried to download update.app to dload folder in sd card, ill get stuck at 5% with charging cable on, or got update failed at 5% with cable unplugged, cant recover through dns too, got a 4g router > wifi repeater> tried various options still same error through eRecovery, and HiSuite dont detect phone, only detects in recovery, but then it fails cause says cant recover this kind of phone through HiSuite. Fastboot is possible still but as i said not much of a help cause phone is bootloader locked... any way to still recover it somehow? yesterday spent all day working on solutions, tried many fw on sdcard, tried fat32 and ntfs formats still same error at 5%.
Appreciate your help!
Simplyeh said:
Hey there, got huawei p smart fig-lx1, my friend gave me to give it a try to make it work, due to some updates i believe its needs to be flashed fully, its bootloader locked, no twrp, only eRecovery, but unfortunately - "Getting Package info failed" error shows up, tried to download update.app to dload folder in sd card, ill get stuck at 5% with charging cable on, or got update failed at 5% with cable unplugged, cant recover through dns too, got a 4g router > wifi repeater> tried various options still same error through eRecovery, and HiSuite dont detect phone, only detects in recovery, but then it fails cause says cant recover this kind of phone through HiSuite. Fastboot is possible still but as i said not much of a help cause phone is bootloader locked... any way to still recover it somehow? yesterday spent all day working on solutions, tried many fw on sdcard, tried fat32 and ntfs formats still same error at 5%.
Appreciate your help!
Click to expand...
Click to collapse
if you have bootloader locked and frp locked I don't think you can do much...
leap_ahead said:
if you have bootloader locked and frp locked I don't think you can do much...
Click to expand...
Click to collapse
yes.. its never been unlocked tho.. :/ huawei puts eRecovery and its useless lol ...
Simplyeh said:
yes.. its never been unlocked tho.. :/ huawei puts eRecovery and its useless lol ...
Click to expand...
Click to collapse
I never try erecovery
This happened to me and fixed it with firmware finder and erecovery just google it it's easy
ilyes9999 said:
This happened to me and fixed it with firmware finder and erecovery just google it it's easy
Click to expand...
Click to collapse
can you please be more specific?ive tried many firmwares to that variation on full-ota-update various combinations and it always stops at 5% when force updating, please read carefully what i wrote, maybe you can link me specific guide that worked for you? couse pretty much all combinations with sd card have been tried, and downloading through eRecovery is not posibble so far, i tried to change dns server of my router but it's possible to do that only for ethernet connections, for wifi it stays default dns i believe cause theres no ooption to change it
Simplyeh said:
can you please be more specific?ive tried many firmwares to that variation on full-ota-update various combinations and it always stops at 5% when force updating, please read carefully what i wrote, maybe you can link me specific guide that worked for you? couse pretty much all combinations with sd card have been tried, and downloading through eRecovery is not posibble so far, i tried to change dns server of my router but it's possible to do that only for ethernet connections, for wifi it stays default dns i believe cause theres no ooption to change it
Click to expand...
Click to collapse
I didn't find anything online but i tried firmware finder
At first i tried the newest update and didn't work .then i used an old full ota update its size was 2 gb its 8.0.0.127 (c185)
ilyes9999 said:
I didn't find anything online but i tried firmware finder
At first i tried the newest update and didn't work .then i used an old full ota update its size was 2 gb its 8.0.0.127 (c185)
Click to expand...
Click to collapse
will try older versions im using firmware finder & and some firmwares from google as well... downloading FIG-LX1C530B124 (8.0.0.124) FIG-L31C530B124 (8.0.0.124) full-ota-mf atm. thanks, i guess i tried only 130+ versions, hope this helps, ill keep updated
My pc broken atm so I can't help you much .
All I know is that i used firmware finder and Changed th dns settings then i used erecovery to update and worked fine.
---------- Post added at 08:28 AM ---------- Previous post was at 08:25 AM ----------
Simplyeh said:
will try older versions im using firmware finder & and some firmwares from google as well... downloading FIG-LX1C530B124 (8.0.0.124) FIG-L31C530B124 (8.0.0.124) full-ota-mf atm. thanks, i guess i tried only 130+ versions, hope this helps, ill keep updated
Click to expand...
Click to collapse
Yes try old version they will work because bewer updates aren't officially available .
This might help
https://www.google.tn/amp/s/forum.x...y-huawei-erecovery-solution-100-t3620165/amp/
I feel your pain dude ? happened to me i was stuck for days till I finally figured it ou on my own
ilyes9999 said:
My pc broken atm so I can't help you much .
All I know is that i used firmware finder and Changed th dns settings then i used erecovery to update and worked fine.
---------- Post added at 08:28 AM ---------- Previous post was at 08:25 AM ----------
Yes try old version they will work because bewer updates aren't officially available .
This might help
https://www.google.tn/amp/s/forum.x...y-huawei-erecovery-solution-100-t3620165/amp/
I feel your pain dude happened to me i was stuck for days till I finally figured it ou on my own
Click to expand...
Click to collapse
just tried the old version in sd card...it didnt work... same error at 5%.... gonna read that link tomorrow, thanks ! ^^:highfive::highfive:
Simplyeh said:
just tried the old version in sd card...it didnt work... same error at 5%.... gonna read that link tomorrow, thanks ! ^^:highfive::highfive:
Click to expand...
Click to collapse
Use the old version with erecovery dns not sd card !!!
ilyes9999 said:
Use the old version with erecovery dns not sd card !!!
Click to expand...
Click to collapse
i lost all hopes, tried all firmwares even fig-l31 various versions, configured through virtual w10 hotspot and still same error, no luck at all, i think this phone ready to go to thrash bin lol (((((((((((((crying::crying::crying::crying::crying: