Hello,
I decided to write this because I had a hell of a time finding out how to do this - all the information is here on the forums but not all in one place so you can just read and install the custom ROM.
The ROM that is available that I have successfully tested is CM7_RC1_X8_004
You will need the following programs:
SuperOneClick - to root your phone
Busybox - from the android Market
Xrecovery
Super Manager - from the Market
X10 Flashtool
and your ROM
Rooting
~~~~~
So First we want to root the phone, we will need to set the USB debugging mode to on. Go into settings - applications - Development and click on the tick next to USB debugging to turn it on. Plug the Phone into the PC via the USB Cable.
At the end of this post are files download SuperOneclick and extract it into a folder on your desktop then run the exe file called SuperOneClick.exe and click on root, it will scroll through a load of things then come up with a message that says "Root files have been installed would you like to run a test?" To which I always say Yes then it says "A su command will now be sent to your phone please hit allow in superuser" (there were no messages on my phone so I just hit OK on that message) Then a message comes up asking you to donate, so if that utility is handy for you feel free to donate to the makers of SuperOneclick!
You can now turn off USB debugging.
Installing BusyBox
~~~~~~~~~~~~
Go to settings - sound and display and set the screen timeout to 30 mins I have found it to keep locking while installing Busybox as it takes a while to do.
Go to the market and search for Busybox and install and accept permissions on it. once this part of the application has installed you need to run it as it has only been copied to the phone - now you have to actually install it.
So run the busybox app and say OK to the message from the developer (reading it first of course) then it will ask you for permission which you say yes.
Next we see a screen saying Status: Working, Your phone is Rooted, amount of free space in system is 10128kb, Busybox not found. (we haven't installed it yet.)
The first time I did this it took ages to get anywhere and ages to install so just be patient and wait for it. Choose Busybox 1.17.1 but change the location of the install to system/xbin (the drop down box at the bottom of the page.) Then Click Install. For me this time it failed so lets try v 1.18 and the default location. back up and then relaunch busybox installer.
I found I had to change the settings a couple times when I installed before to get it to install, you might not find that. Sure enough this time it installed fine using v1.18 and the default save location.
installing Super Manager and Xrecovery
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
First you need to download the new ROM files from here:
http://forum.xda-developers.com/showthread.php?t=973753
Go to the third post and download the rom: (currently
http://hotfile.com/dl/109568508/3381b40/CM7_RC1_X8_004.rar.html)
Once it's down extract the files to another folder in your desktop and you should have the files LiveWallpapers.zip, Update.zip, changelog.txt and a BASEBAND folder.
Then connect your phone and copy the three files and the folder to a new directory on your SDcard. (I called mine ROM) Now remove the cable from the PC not forgetting to unmount it first.
Then you need to download Super Manager from the market and install it then run it - choose File explorer - click on the favourite icon at the bottom(the picture of a folder and a heart) and choose SD card, navigate to your folder where you stored the files and click on all the ticks next to the files and folder and then when they are all selected click on any file and hold it till a menu appears and choose copy (This is to copy the files)
Then Click on the favourites one again and choose root path. Then go to System and then Bin and then click on one file and hold the button till the menu appears and scroll to the bottom where you see paste and click on it and this will paste the files into this folder.
X10 Flash tool
~~~~~~~~~~
Next we need to use the X10 Flastool so download it from
http://www.multiupload.com/GYL7A7XQBT
(The thread I got this from is: http://forum.xda-developers.com/showthread.php?t=920746).
Once downloaded you need to extract the files and run X10FlashTool.exe.
Then before you plug the phone back in you need to put it into USB debugging mode again. Go into settings - applications - Development and click on the tick next to USB debugging to turn it on. Plug the phone back into the PC.
In the X10Flashtool click on the button that says ask root perms and press allow on the phone when it comes up and in the FlashTool it will say "INFO - Root Access Allowed."
Then Click Optimize and it will then reboot your phone, let the phone come back up and then in x10 Flasher click ask root perms and it should say Allowed again after a short time.
Then click on xRecovery. Power the phone off and wait for 20 seconds and then power it back on. As soon as you see the words "Sony Ericsson" appear on the screen start hammering the back button. Then the phone will boot into xRecovery.
Backup your phone
Use the sound volume up and down buttons to move up and down the menus and the home button to select the option (I think the back button is back as well). Choose the backup/restore option, then backup to backup your phone to the SD card (First the system and then the data)
Then when it's finished it will say complete and you can go ahead and put the new rom on the phone. Choose install Custom Zip, then choose custom zip from SDcard. Navigate to the directory you put your ROM in and choose update.zip it will ask you if you are sure so choose yes and it will update your phone.
Once it says Install from SDcard complete hit backup then choose the top option reboot phone.
Your Phone will then reboot into Android 2.3
Good job on this
Restoring your Phone to It's previous working state
To restore you phone back to how it was before you started all this all you need to do is Boot xRecovery by hammering the back button once you see the very first Sony Ericsson which takes you into xRecovery.
Then use the volume up and down on the side of the phone and choose backup and restore and you can choose advanced restore to restore a different component or just do a restore to do the whole phone back as it was.
I have just restored back successfully!
is there a big risk that i will damage my phone in case i will do everything in #1post step by step with instruction?
I don't really think so, but there is always the possibility when flashing your phone that you might Brick it.
I didn't break mine and I will do this to test every new firmware that comes out and because I've done it once most of the hard work is done which was installing xRecovery.
In short I offer you no guarantee this won't brick your phone what you do is at your own risk, but I had no trouble.
Yeah i know this that im doing it on my own risk, im only asking of probability of breaking phone cus i want root and install custom rom but i have a little bad luck
OK,
I don't know about failures - I haven't seen anyone complaining about destroying their phone and it didn't happen to me, that's all I know sorry.
super manager isn't copying and pasting files. i follow the guide and when i click paste, nothing happens.
edit: it just says "prepare to copy" when i try to copy the files, then nothing when i paste
stef.t97 said:
super manager isn't copying and pasting files. i follow the guide and when i click paste, nothing happens.
edit: it just says "prepare to copy" when i try to copy the files, then nothing when i paste
Click to expand...
Click to collapse
In supermanager open the folder system and then select the folder Bin, you have to change the folder from read to read and write first before u can copy anything.
thanks, realized i hadn't given super manager super user permission. what do i do differently when installing Rachts Roms because they don't come with an update.zip?
stef.t97 said:
thanks, realized i hadn't given super manager super user permission. what do i do differently when installing Rachts Roms because they don't come with an update.zip?
Click to expand...
Click to collapse
When u have Xrecovery and make an backup it will create a folder in SD card "backup" after u download the Rom from racth u put the folder on the backup folder, then in XRecovery u go to backup then restore, u will see the rom there, just press ok and it will do the rest like the zip file.
to the OP thanks a Lot i appreciate this Guide!
and on the same vein as the others i am having some problems pasting the contents of the ROM. i have given Super manager root prves. but it says not enough free desc space which seems right to me cus there is only 128Mb storage on the phone.
i feel like i am missing sumthing basic please assist me, Thanks!
skowrone said:
Yeah i know this that im doing it on my own risk, im only asking of probability of breaking phone cus i want root and install custom rom but i have a little bad luck
Click to expand...
Click to collapse
Just need to be well prepared!!!!
Based on my experience.. I didn't really know what I've done that make my phone cannot boot... it's all because not really prepared... Need to do some research and reading 1st..
Luckily, when done some reading, I manage to boot the phone after flashing with SEUS..
And after that... I prepare to do checklist... Now.. Everything seems OK...
genghisk said:
to the OP thanks a Lot i appreciate this Guide!
and on the same vein as the others i am having some problems pasting the contents of the ROM. i have given Super manager root prves. but it says not enough free desc space which seems right to me cus there is only 128Mb storage on the phone.
i feel like i am missing sumthing basic please assist me, Thanks!
Click to expand...
Click to collapse
With your phone did you get a 2GB SD card? I did with mine and that's where you need to copy the ROM files to(you need to copy the files in windows to the SD card). The only thing I was copying with super manager was the xRecovery files. (and I'm not sure I needed to do that since you kinda install xrecovery on the flash tool, I just posted exactly what I did)
mss_2212, yeah using the SE repair might get you out of a few scrapes, it's good that they offer such a utility to completely flash your phone back to the latest SE update!
Well, V6.0a is now out I am downloading that as we speak.
^^ how is it running? i see BlueTooth not working.
i realize my error you were talking about copying the files for Xrecovery i thought you were referring to the ROM files.
Thanks for the help! I hope I success for the install of the last custom rom from CM 2.3! If it's good, it will be translate for the french forums! ;-)
I'm still setting it up to how I like it but so far so good - it's nie and stable for me and WI-FI works which is a dream.
Don't forget to make a backup first of your old ROM though!
Thanks
Hi!
I tried to install the last 2.3.3 CM7 with this guide, but I get a problem with the X10 flashtool... In fact, I don't understand if I have to lauch the .exe in my phone, or in the PC. Because with the phone I can "ask root perms" but I get an error (it says me to use usb debug the phone and install...) but I think that I've followed the guide And since the PC, there is no file in the "firmware" fold...
So I install the custom ROM, without that step, and it success, even if I get another problem, but I think, because of the instability of the rom (no market, and no possibility to dl by internet)
Thanks for the help!
Hello,
Not quite sure what you're getting at, I will try to help if I can (I'm still a bit of a noob really myself)
You need to run the x10 flash tool on the PC with your phone connected in usb debugging mode before it will work.
"Then before you plug the phone back in you need to put it into USB debugging mode again. Go into settings - applications - Development and click on the tick next to USB debugging to turn it on. Plug the phone back into the PC."
The Market and other applications are included in the latest version(.6a as of this writing) in a zip file called gapps-gb-20110307-signed.zip to install them you need to boot into xRecovery and choose install custom zip and then point it to that file which is next to the install.zip. Then the market will work.
v.6a is really nice but ultimately I had to revert because I needed to take some pics but a lot of stuff is working well!
Related
For those of you who are uncertain of how to use adb commands or are afraid of editing their db check out the link below for more details about the app.
This is a quote from the site below explaining what it is:
"It's a Windows application that lets you sideload apps on ANY Android device, on any carrier, without the Android SDK installed. And you DON'T HAVE TO BE ROOTED"
Sideload Wonder Machine
***Note I am not the developer of this app or have any connection to it other than the fact that I happened to see the post and figured I would spread the word to everyone here. I have tested it on a ATT Captivate (which was already rooted) and it works as described.
so does this mean you can load any .apk file from the web into this Sideloader program and when the Captivate is plugged into the computer it will install it without issues?? and no need for modifying the no-market value settings thru root explorer?
Sticky Needed.
IT WORKS!!!
I tried this program yesterday and can confirm that it works
so its a cleaner way to install apk files into the captivate instead of editing the dbsettings file?? do I just save the apk file to my computer then just plug the captivate into the computer then select the file and run the program?
This lets you sideload any app (.apk file - android app file extension) that you can download on your computer, and it does not require rooting.
You need to download the samsung drivers for the phone (sammy website), upgrade to .net 4 (google search), download the wonder machine program from the beginning of the thread, and turn on usb debugging on the phone (settings>applications>development>usb debugging on)
Download an .apk somewhere on the net (I chose bansai blast as my first one). MOVE THAT FILE INTO THE FOLDER WITH THE UNZIPPED WONDER MACHINE. If you don't then you will get a "loader.bat" not recognized error when you hit go. Next, plug in your phone, pull down the notification tap and mount your sd card to the computer (I know that the instructions on android central say to keep your phone in charge only mode, but then the program will not find your phone if you don't mount the card). On the wonder machine hit choose file, and select the apk file you downloaded (again, in same folder as wonder machine program). Hit ok. Then hit go. It should pull up a dos looking command window and display your serial number (If you have a firewall like zonealarm, be sure to let the program access the net and your trusted zone - serial won't display if you don't) and a "press any key to continue." Do that and it should take a second to say "install successful. press any key..." Check your phone and the app should be in your apps list. Hope this helps, as it took me a while to figure all this out.
droid explorer offers better functionality. still, good find
with droid explorer am I able to copy the dbsettings file directly to my micrsd card then open SQLite from my phone edit and paste back into the origin dbsettings and overwrite it? or does that have to be done thru the comp??
I can confirm too that this program works great.
Sorry for the late responses but here they go:
poulosjr said:
so its a cleaner way to install apk files into the captivate instead of editing the dbsettings file?? do I just save the apk file to my computer then just plug the captivate into the computer then select the file and run the program?
Click to expand...
Click to collapse
That is correct, plug in your phone, place the apk anywhere on your comp, and browse for the apk thru the app. this then installs the apk directly into your phone.
poulosjr said:
with droid explorer am I able to copy the dbsettings file directly to my micrsd card then open SQLite from my phone edit and paste back into the origin dbsettings and overwrite it? or does that have to be done thru the comp??
Click to expand...
Click to collapse
With this app you do not have to edit the db, the only down side of this app is that you have to install the apks via your comp.
systoxity said:
droid explorer offers better functionality. still, good find
Click to expand...
Click to collapse
You are right, with this app you lose a bit of flex ability since this method installs via your comp. But for those people who dont want to edit or use the adb push method it could not get any easier. I personally end up installing apks when i am on the road all the time so i prefer the permanent methods on my phones.
this works awesomely!
just make sure to put the .apk's in the same folder as the sideload program
+1 to this. Not the most convenient method but quick if you have your computer with you
i hate logging into windows. I'd love a mac version!
but I do have this on my windows ( i believe it is an androidcentral.com app ) and i used it a lot until i started messing with my phone and learned about adb.
I just wanted to say thanks for the quick guide. I was concerned about messing around with the db settings and screwing stuff up. I have absolutely NO problem installing non-market apps through my pc--thanks a lot dude!
I've been using it. My phone is unrooted. I used it to add 2 apps. A live wallpaper and a need for speed game demo.
Thanks to all of you !!
by following all that you posted I was able to root with super user , save with rom mgr , load wireless tether which was my goal.
Just to update were i screwed up must remember with super user (update zip) put the whole zip file on phone as a stand alone not in any folder . With side loader must be in the same folder as side loader to work , of course with micro net 4 installed, on the pc and debugging enabled , samsung usb driver installed on pc and superuser must installed to use side loader
thanks for all you help !!!
Hi Guys!
Now that finally the devs arrived with some amazing ROMs, I change these ROMs a lot every day. But I experienced some problems because I often do that at work where I don't have adb shell available. So I created an xRecovery zip-file to install Android Terminal Emulator before booting into the ROM the first time.
That gave me the idea to offer you some zip-files with useful (free) applications you perhaps want to have pre-installed on any ROM before booting it.
I also attached two blank zip-files where you can easily add your own apps, perhaps a preferred keyboard in your language or whatever you want to push onto your phone via xRecovery.
If somebody's interested we could turn this into some kind of collection for universally usable xRecovery files.
How to use the blank zip-files:
To use this method, you need to have the app available as an apk-file, of course.
If you have the app already installed on the ROM you're looking to replace, you can just use a root file manager like Root Explorer to copy and paste the apk file from \data\app\ to your SD card.
If you cannot get the apk file, you can request it here or send me a PM and I'll try to prepare the zip-file for you. Don't ask me to do this with paid apps! This whole method is meant to be used with free apps and I will not add or support warez in any form!
Okay, now let's start. As you can see, I attached two blank zip-files: blank_data-app.zip and blank_system-app.zip. Why two of them?
There are basically two locations where you'll want to install your own apk's:
\data\app\ --> contains all non-system-relevant user apps and should be your choice in most cases. If you install here, you can easily uninstall the apps later if you don't need them anymore.
\system\app\ --> contains system-relevant and pre-installed apps such as vending.apk / phonebook.apk / Email.apk / Gmail.apk / Calender.apk / etc.
Only install here if you want to replace one of these apps with a themed one or if you want to force-update market for example! It's not possible to uninstall anything you installed here the usual way! You'll have to use Titanium Backup or another third-party app.
Only overwrite existing apps in this folder if you know what you're doing!
So, just choose where you want to install your app, open (NOT extract!) the corresponding file with a zip-file manager of your choice (I'd recommend 7Zip or WinRAR) and drag the apk-file you want to install into data\app\ (for blank_data-app.zip) or system\app\ (for blank_system-app.zip. pretty obvious, huh? ). Confirm to copy the file there and close the zip file.
That's it. Now you just have to give your zip-file an appropriate name and push it onto your SD card to install it via xRecovery-->install custom zip-->choose custom zip from sdcard.
__________________________________________________
Some comments on the zip-files attached:
- Android_Terminal_Emulator.zip:
This is useful if you installed a new ROM and experience problems like flashing homescreen or no GSM/data connection. In that case, open ATE and type the following:
su (confirm SuperUser rights)
busybox killall servicemanager
Click to expand...
Click to collapse
This will restart the phone and hopefully solve your problems. (I know this mini guide seems not to fit here, but perhaps someone reads it before spamming the dev thread with questions that were answered a thousand times )
- JIT_Enabler_v2-zdz.zip:
all KUDOS go to zdzihu. Make sure you visit his thread to always get the latest version of JIT Enabler.
Note that you only need this file on 2.1 ROMs where JIT Enabler isn't pre-enabled! On 2.2+ ROMs JIT is always included.
- New Market V2.2.11.zip:
Make sure to sign into your google account and open market once (accept licence agreement) before you update to the new market. Many people experience problems if they don't do this!
- TitaniumBackup-3.6.7.1.zip:
You can also create this file yourself. If you open TB and tap on Settings-->more... there's an option to create an update.zip
- XDA_app.zip:
Useful for any kind of problems of course
__________________________________________________
So, not much of a collection at the moment, but perhaps there's interest for something like that. If you know something that will come handy to have it preinstalled, just tell me!
Cheers
qwer23
very nice idea, but i was wondering if there is a guide to how to make .zip files for xrecovery
"instead of giving me a fish to eat for a day, teach me how to fish!"
Sent from my X10 using Tapatalk
mezo9090 said:
very nice idea, but i was wondering if there is a guide to how to make .zip files for xrecovery
"instead of giving me a fish to eat for a day, teach me how to fish!"
Sent from my X10 using Tapatalk
Click to expand...
Click to collapse
i like that point of view! well i only found one for creating a whole update. zip for a rom with android kitchen I can explain some of the basics inside this zip file this evening after work. a zip just for installing apps is created quite easily. it gets more complicated if you have to set permissions and things like that.
Sent from my rooted X10i using XDA App
good idea!
thanks
Great! thanks a lot for this useful guide, I will use it.
Just one question in the same line like mezo, If I already have a rom zip file and I want to add to this rom the apps, would it be possible? and Could you explain us? or its just copy the files inside the \data\app\ folder?
Thanks again for your help.
Great idea, thanks!
Sent from my Freex10 2.2.1 Darkstyle
770G said:
Great! thanks a lot for this useful guide, I will use it.
Just one question in the same line like mezo, If I already have a rom zip file and I want to add to this rom the apps, would it be possible? and Could you explain us? or its just copy the files inside the \data\app\ folder?
Thanks again for your help.
Click to expand...
Click to collapse
As long as the apps aren't system-relevan, it's as easy as that, yes
For all of you willing to learn more: I'm quite a noob, too, but I'll try to make a tutorial on how to create recovery zip-files as soon as I can.
Won't be today though, because I'll go out to party into my birthday this evening
So long,
qwer23
mezo9090 said:
very nice idea, but i was wondering if there is a guide to how to make .zip files for xrecovery
Click to expand...
Click to collapse
You can use the Android Kitchen to create custom zip files, I use the Cygwin method as it makes file management a little easier imo.
Great idea man, a lot of thanks!
1 zip - several apps
Is it possible to create one zip to install several apk's?
Maybe I have a few "stock" apps, the ones that I always need, and want to install all in a single step.
Can this be done or I have to install one by one even using xRecovery?
Thanks!
Great tuto and thank you for sharing
jpdediego said:
Is it possible to create one zip to install several apk's?
Maybe I have a few "stock" apps, the ones that I always need, and want to install all in a single step.
Can this be done or I have to install one by one even using xRecovery?
Thanks!
Great tuto and thank you for sharing
Click to expand...
Click to collapse
you can throw as many apps as you want into the zip file. everything inside the data\app folder will be installed
Sent from my rooted X10i using XDA App
Hello all. Ihave a problem with xRecovery 0.2 (the last release) when I reboot my phone holding the back button a few moments after the SE Logo appears, it doesn't work. I've installed it with the xRecovery installer and with the FlashTool with BusyBox 1.17 installed. I'm on a X10 2.1 Generic . Thaks
Gugoo said:
Hello all. Ihave a problem with xRecovery 0.2 (the last release) when I reboot my phone holding the back button a few moments after the SE Logo appears, it doesn't work. I've installed it with the xRecovery installer and with the FlashTool with BusyBox 1.17 installed. I'm on a X10 2.1 Generic . Thaks
Click to expand...
Click to collapse
Firstly, the xRecovery depends upon its version of busybox. In the version I use it is 1. 15. 3
So re-install xRecovery(just in case).
Secondly, u don't hv to keep the back key pressed but tap it a few times repeatedly during the screen with "Sony Ericsson" logo.
Hope this helps.
Regards
kLouD™
Sent from my X10i on zdzihu's 2.2.1(beta3) using XDA App
thanks for the info!
kloud_ said:
Secondly, u don't hv to keep the back key pressed but tap it a few times repeatedly during the screen with "Sony Ericsson" logo.
Hope this helps.
Regards
kLouD™
Click to expand...
Click to collapse
Thx but that doesn't working =(
it works ! thx
bro i need your help... im using froyo custom rom on my x10.. now i need to install backup & restore apps but it said apps cannot installed. so how to install it using xrecovery... i have the apk as well.. but i think the apk is for Eclair.
Sof_600 said:
bro i need your help... im using froyo custom rom on my x10.. now i need to install backup & restore apps but it said apps cannot installed. so how to install it using xrecovery... i have the apk as well.. but i think the apk is for Eclair.
Click to expand...
Click to collapse
sorry, backup and restore only works with stock se rom and mods based on it (like kx10 or blue sparks,...). it's impossible to install on any 2.2/2. 3 or 2.1 AOSP rom.
Sent from my rooted X10i using XDA App
in deed ..you only have to press twice.. (press one..wait one sec then press again and release...and wait for the terminal to popup) voilà!
--------
hey im having a problem.
I know that you will say "this belong to another thread" but since this way i can trick the thing and install again the system apps like the Package administrator etc, i need to know what to do in mi case with this method:
mi BETA3 was working smooth!
iv been using the BETA3 a long time but some days ago, suddently i couldn't install apps anymore (thouse that are in mi SD or frome the market...not even Applanet...nothing)
The screen shows the "barber shop black and white" bar rolling and rolling and never stop.
Mi USB detection is not working, that means that mi PC is recognazing the phone (it sound like a UYSB is been conected) but never apear the folder of the SD. nto even options of debugging usb etc in the notification bar of the device.
and when i get in Settings> runing aplications, all aplication are in "calculating..." mode. so they say 00 mb. and never stop triying to get the numbers. its so odd.
the other aplication (that came installed with the BETA) works fine.
I have tryed, erasing the firmwares and isntalling them from the beginning and everything worked fine with old firms like 2.0 and 2.1 update1. too!
then i do the root (first z4root, then busybox, then xRecovery) and make xrecovery work. install the beta 3, and again i can't do anything.
i triyed installing the BETA4 but never stop rebooting so i just yield and stick with BETA3.
any idea..plzzz!!! i really don't whon't to use Eclair...it's just so ugly!!
it's not working on mi xRecovery. i put the apps insinde app folder of thwe .zip and put it in a random folder of mi SD, then do >the Recovery > install custom.zip>Choose from SD card>confirm install the selected "blank_data-app.zip".
and it say:
Finding update package.....
opening update package.....
E i asume E means Error!) can't open blablabla/blblabla folder/blank_data-app.zip (bad)
installation Abnorted.
i asume iv done something wrong...!?!?
PS: BTW can somebody sen me the original .apk of FROYO bwecasue i can't find them , to use the system-apps.zip
thanxxx!!!
So i've been looking all over the development forum.. and i can't find any instructions to install a rom, the only so-called instructions i found was "Use xRecovery" herp derp.. =/
I have the "2.3.2 CM Legend 31 v0.3" one
I have everything working, Root explorer.. xrecovery.. BusyBox
absolutely everything, i tried extracting the cm7-0.3.rar and compressing it into an update.zip for it to work on xRecovery, but it still wont work.
The files inside the rom are: system.img, cache.img, data.img, nandroid.md5.
This is what it shows when i try to install it
-- Install from SD card...
Finding update package...
Opening update package...
Installing Update...
And then it quickly closes and goes back to the main menu..
Any help would be appreciated.
x8brah said:
So i've been looking all over the development forum.. and i can't find any instructions to install a rom, the only so-called instructions i found was "Use xRecovery" herp derp.. =/
I have the "2.3.2 CM Legend 31 v0.3" one
I have everything working, Root explorer.. xrecovery.. BusyBox
absolutely everything, i tried extracting the cm7-0.3.rar and compressing it into an update.zip for it to work on xRecovery, but it still wont work.
The files inside the rom are: system.img, cache.img, data.img, nandroid.md5.
any help would be appreciated
Click to expand...
Click to collapse
you need to follow these instructions-
1. Extract the downloaded ROM.
2. Ensure there are 4 files in a folder(name it as you wish, or you can simply take the extracted folder!).
3. Make a folder in your SD card with name "xrecovery"(without quotes)
4. Make a sub-folder "backup"(without quotes)
5. Place the folder in the backup folder( /sdcard/xrecovery/backup)
6. Boot into xRecovery.
7. Goto Backup and Restore.
8. Goto Restore.
9. There you will see your folder name.
10. Just select and press Yes.
Done!
Cheers!
mohakrastogi said:
you need to follow these instructions-
1. Extract the downloaded ROM.
2. Ensure there are 4 files in a folder(name it as you wish, or you can simply take the extracted folder!).
3. Make a folder in your SD card with name "xrecovery"(without quotes)
4. Make a sub-folder "backup"(without quotes)
5. Place the folder in the backup folder( /sdcard/xrecovery/backup)
6. Boot into xRecovery.
7. Goto Backup and Restore.
8. Goto Restore.
9. There you will see your folder name.
10. Just select and press Yes.
Done!
Cheers!
Click to expand...
Click to collapse
Kudos to you my friend.. thanks a lot it works perfectly =)
Ok now i have a bigger problem.. i can't access my SD card on the computer!!
only working via file managers :S
is there any way to move files to it using the android SDK? (Yes the android sdk/adb commands work i tried installing an app with it and it worked)
x8brah said:
Ok now i have a bigger problem.. i can't access my SD card on the computer!!
only working via file managers :S
is there any way to move files to it using the android SDK? (Yes the android sdk/adb commands work i tried installing an app with it and it worked)
Click to expand...
Click to collapse
you flashed the rom? there is still a bug with USB Mounting.
mohakrastogi said:
you flashed the rom? there is still a bug with USB Mounting.
Click to expand...
Click to collapse
why yes i did, EPIC FAIL.. lol
I assume im going to need to put my official ROM on the SD card again with a memory reader?
EDIT: Disregard that.. used flashtool to go back to 1.6, no problems now.
i installed 2.3.2 CM Legend 31 v0.3 and it works ok for me.
after a while, it says "Login to Google Talk failed, check if you have chat
available"
i know this is not the problem of this rom.
i google the message, and find other roms may have the same problem.
but this message is annoying.
dose anyone know the solution??
thank you for my bad english.
I downloaded the Dextermod 1.2 without issue to my sd card, but applying mod didn't not show android market but did erase any apps loaded from appoke market. So I found and tried to download 1.3, but it does not ask to change file name and then says download unsuccessful in the notifications bar. Tap it and get popup, "Cannot download. The content is not supported on this phone." So I try the 1.2 mod again and get the same message. Anyone else with this problem or can help me with a fix?
Downoad it on a computer and put it on your sd, android webkit browser doesnt like zip files.
Rename it Update.zip before running.
Looks like your new like me. I downloaded to sd card. (make sure card is clean. I had a problem with that first-no windows files) Also I downloaded file from my pc to the card in a dongle Then transfered card to the A7. went to file manager. found the file on the card (elocitymodv13) under sdcard\sdcard-disk0 and then press on it until menu came up and hit rename and then renamed it update.zip. finally go through the routine of powering off A7, then hit power key for 2 seconds, let off, and then hit power button again until message comes on screen about entering recovery mode.
Then use the menu key on side of screen to enter recovery menu once the android image shows up. you then need to use search key and back key on side of screen to move up and down the menu. First move highlight down to "Wipe/factory reset" and hit menu button to apply command. (Dexter recommends wiping the slate clean to ensure proper function of his mod.) When that is done, you will see the menu again and move down to "apply sdcard:update.zip" and hit menu buttom to apply command. this will then put the new mod. on the system. The only other thing that will be neccessary is to go back and download the "ElocityMod v1.3 bluetooth fix" http://forum.xda-developers.com/showthread.php?t=890042 . This update gets applied the same way as above except you dont obviously need to use the wipe/factory reset command again. This will give you bluetooth function back. I hope this is clear enough.
I have been trying since I got the thing to tether it to my windows mobile phone. Good luck with that. I still haven't found an answer. take care.
file name
as stated
download the file to your computer. then rename it to update. Just
update
You don't need to put .zip at end because its already a zip file. Then transfer it on to your sd card. Easiest way is to open your My computer drag and drop to the dir that is sd card on your computer that way it automatically goes into the root of the sd card.
then do the as stated flash update procedure.
t_sandat8 said:
as stated
download the file to your computer. then rename it to update. Just
update
You don't need to put .zip at end because its already a zip file. Then transfer it on to your sd card. Easiest way is to open your My computer drag and drop to the dir that is sd card on your computer that way it automatically goes into the root of the sd card.
then do the as stated flash update procedure.
Click to expand...
Click to collapse
Jesus, this just doesn't stop.
The file NEEDS TO BE Update.zip
Please read the writeup I just made this morning describing why people are getting screwed up on this, how to fix it, and why I rag on people like you who put out misinformation.
http://forum.xda-developers.com/showthread.php?p=11745552#post11745552
I'm having huge troubles installing Xrecovery to my x8 rooted 2.1 i have busybox and also have root explorer i have done everything correct ive even done manual install and automatic but neither work i really need someone to help me because xrecovery just won't work for me.
The "official" post is here(don't mind the x10 title). I will explane it to you myself.
Instructions:
1. Download the recovery file (from here)
2. Extract it, (it contains 3 files) and copy/move the files to your SDcard (anywhere)
3. Run "Root Explorer" (a phone app, you can find it from the market) and with it copy/move the 3 files in the /system/bin folder (just put them there).
4. Reboot you phone and when you see the "Sony Ericsson" start clicking the "back" button (do not stop until you see the Xrecovery).
P.S.: Do not install an other bussy box. Xrecovery works fine with this version so there is not need to chenge it.
Its Still not working........... PLEASE SOMEONE HELP ME IM GOING CRAZYYYYY
Try again with a video this time...
http://www.youtube.com/watch?v=O6eRfqs8TVs
Its Still Not working.....
Before you get crazy reinstall the rom you have (flash your phone). But this is the last solution you should try....
so install 2.1 again and how when i flash my phone then what do i do? im a total newbie!
Go here, download the files again and do it step by step again with the new files.... You may have the wrong version...
(as GreatApo said)
http://forum.xda-developers.com/showthread.php?t=878426
The other way is to update/repair your phone with pc suit (cd was on the box, but can be installs from phone too). This will delete all your data on your phone. Then u will have to do it from the begining ..... Dont forget to buck up if you try this.
Ps:flash and install is done with seus
You can get the latest SE Update Service or PC Companion from SE Support page. Reflash your phone. It will wipe off complete data and will be a clean installation. Then root it. And then go for xRecovery from the above provided link.
It should work then.
ok so i reupdated my x8 to 2.1 so you want me to root it, install busybox from the market and root explorer and load the xrecovery files on?