Database Users

Signature verication failed.

Hi peeps, I'm looking to install a custom kernal like Phoenix 1.49 or Xtreme 1.0 and possibly a custom rom. Everytime I've tried to flash them via Rom Manager/CWM it says Signature Verification Failed. What am I doing wrong. Titanium Backup says I have Superuser access so I believe I still have root. I bought the paid Rom Manager so I could do all this but I am still getting this error. It's really starting to push me towards the edge. I'm off work till the 3rd of January due to knee surgery so I decided to read up on rooting and flashing custom roms and kernels. I have no clue what I am doing wrong. Someone please help me.
Thanks
Tom

Did you use the one click root with clockwork mod? You can't use Rom manager to install clockwork mod while on stock kernel. I'm not sure what steps you have done but you don't have clockwork if u did it thru rom manager

http://forum.androidcentral.com/epic-4g-roms-hacks/42178-rooting-ultimate-guide-v1-0-2-a.html
This is the link that I followed to root. If I'm not supposed to post this on here I apologize. But if you have the time to check this through I would greatly appreciate it.
Tom

You cannot use ROM Manager to flash anything while using the stock kernel. Perform the following steps to boot into ClockworkMod Recovery.
1. Turn off your phone.
2. Hold down VOL DOWN + CAMERA + POWER
3. You should be in ClockworkMod Recovery (Green Text)
4. Flash Phoenix/Xtreme kernel.
5. Reboot
Now you can use ROM Manager to flash anything.

When I do that all that comes up is
Reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe cache partition.
Nothing about my kernel on my sdcard. Does it not have to be in a zip folder or something?

Oh, you never installed ClockworkMod Recovery, which is a requirement to flash 3rd party mods.
Read this: http://forum.xda-developers.com/showthread.php?t=770388

Followed it and still the same thing

I was getting this error when I first got my epic and it was because I was booting into stock recovery (red text). Make sure you are in Clockwork Recovery (green text) as mentioned above by holding Vol down, Camera, and Power when your phone is off. Hope this helps.

That's exactly what I wasn't doing I was just rebooting from Rom Manager Manually lol. My noob mistake. I have it working and installed BakedSnack 1.6 rom any feedback on this rom or is there a better rom/kernel combo that I should use?

tphillips78 said:
That's exactly what I wasn't doing I was just rebooting from Rom Manager Manually lol. My noob mistake. I have it working and installed BakedSnack 1.6 rom any feedback on this rom or is there a better rom/kernel combo that I should use?
Click to expand...
Click to collapse
It's all about what you prefer. I used one of the new odin updates to install dk28 and flashed Mammon's rom and have been loving it especially after applying the gingerbread theme. I'm so content with it I don't plan on flashing anything until they get cyanogenmod or a ported gingerbread out.

sprice5 said:
It's all about what you prefer. I used one of the new odin updates to install dk28 and flashed Mammon's rom and have been loving it especially after applying the gingerbread theme. I'm so content with it I don't plan on flashing anything until they get cyanogenmod or a ported gingerbread out.
Click to expand...
Click to collapse
I'm looking for an elegant type of look. Maybe some text icons or something along those lines. Got any Screenshots of yours I could look at?

tphillips78 said:
I'm looking for an elegant type of look. Maybe some text icons or something along those lines. Got any Screenshots of yours I could look at?
Click to expand...
Click to collapse
This is with AOSP screen locker and 3d app drawer.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Yeah that's pretty sweet I do like that I might have to flash DK28 now so I can get that gingerbread theme. How do I get that AOSP locker. I had that one when I had the Samsung Moment. I liked it. I don't like the epics too much.

tphillips78 said:
Yeah that's pretty sweet I do like that I might have to flash DK28 now so I can get that gingerbread theme. How do I get that AOSP locker. I had that one when I had the Samsung Moment. I liked it. I don't like the epics too much.
Click to expand...
Click to collapse
I'll PM you on how to get it.

thanks
10char

Stock ROM constant reboot on white HTC EVO 4G screen

Hi all,
Here's short history of the phone:
Friend of mine drop his on the concrete about June of last year and whole screen was cracked (not pretty). About month ago I found LCD Screen with Digitizer on ebay bought it and replaced it.
After turning it on everything was working except random reboots. Phone was not registered to any account so there was no internet only WI-FI.
So I started going into system updates and downloading HTC updates it did two of them and I think on the 3rd one it just starts to boot white HTC EVO 4G screen comes on and then it reboots.
Only pulling the battery will stop it.
This is all on stock HTC Sense ROM, rooting was never attempted!
I've searched thru the forums here but everything here relates to failed rooting process.
Can someone please make any suggestions?
Bellow is the pictures of boot loader.
Help is greatly appreciated!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

These directions are for un-rooting, but should fix your phone:
http://forum.androidcentral.com/htc...19278-how-unroot-return-stock-ruu-method.html

Fazulka said:
These directions are for un-rooting, but should fix your phone:
http://forum.androidcentral.com/htc...19278-how-unroot-return-stock-ruu-method.html
Click to expand...
Click to collapse
Thank you!

Followed the instruction, run RUU and it starts to check the phone after this I get error[170]: USB connection error.
I've tried over 10 times.
Step 4 says "Make sure USB debugging is enabled on your phone."
I can't even log into Sense?

The only other thing you can do is find a PC36IMG.zip and put it on your microSD card, then reboot into the bootloader. It should find it and reflash everything, the same as using the RUU.

ffolkes said:
The only other thing you can do is find a PC36IMG.zip and put it on your microSD card, then reboot into the bootloader. It should find it and reflash everything, the same as using the RUU.
Click to expand...
Click to collapse
I've tried using this method found here
I placed PC36IMG.zip in root of the SD card. But when I boot into recovery I can see for about 3 seconds on the right side status bar how it checks PC36IMG.zip file but then it goes back to recovery. It never ask me if I want to update like it says in the above tutorial "Do you want to start update?"
Any other suggestions?

JohnnyBeGood113 said:
I've tried using this method found here
I placed PC36IMG.zip in root of the SD card. But when I boot into recovery I can see for about 3 seconds on the right side status bar how it checks PC36IMG.zip file but then it goes back to recovery. It never ask me if I want to update like it says in the above tutorial "Do you want to start update?"
Any other suggestions?
Click to expand...
Click to collapse
I had to unroot mine and I found that u have to have the right pc36img file. If you dont know what ver rom was running then you may need to try them all. But I had the same problem it just wouldent install the file. Keep trying and if you need help finding them Ill help ya.
I found this but its not the same place I got mine from. http://www.filecrop.com/htc-evo-4g-roms.html

Thanks for the reply!
Somewhat of a progress. I tried countless times and it always gives me USB connection error: Then I downloaded HTC Sync and and I think I went to Hboot and I heard sound on windows it seemed like phone got recognized and I was able to finish the processes. It was flashed using RUU_SuperSonic_S_Sprint_WWE_3.70.651.1_Radio_2.15.00.11.19_NV_1.90_release_161482_signed. Then when I went to again in recovery it was again red triangle over the phone.
After that I just let it try to boot and it finally booted into HTC sense!
Turned on WI-FI and wanted to check if there's any updates and it said no updates?
This is what recoveries I've tried so far:
Amon RA 2.1.1
Amon RA 2.2.1
Amon RA 2.3 (Added 02/09/2011)
Stock Recovery 3.26.651.6 (Added 01/18/2011)
Stock Recovery 3.29.651.5 (Added 01/18/2011)
Stock Recovery 3.30.651.3 (Added 01/18/2011)
Stock Recovery 3.70.651.1 (Added 01/18/2011)
One by one I tried each one renaming to PC36IMG.zip and none of them asked me if I want to do the update. It just checks it and goes back to bootloader.
Why do I get red triangle?
What should I do now?
Help is appreciated!

[WIFI Only] [How-to] GT-P1010 Gingerbread Update

I know a lot of people are going to have problems updating to the latest gingerbread build.
PLEASE NOTE: This update will remove root but you can root again with CF-Root from second post.
ALSO, THIS PROCESS WILL WIPE DEVICE!
1) Put your P1010 into download mode (by holding POWER and VOL-DOWN):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2)I went ahead and used ODIN tool to downgrade/upgrade to the latest FROYO firmware before Gingerbread:
P1010XWKC1_OXX
(OEM Flash Guide here)
You should have the same tick marks and files loaded as in my screenshot. Be sure that the box is yellow on the right and you can initiate the firmware install by clicking 'Start'.
3) (VARIES) From there, after restart some people will experience a force close followed by a reboot loop. You will need to flash this kernel via ODIN:
P1010ZHKF1-kernel
(Flash this the same way as above but UNCHECK Re-Partition and CSC!)
4) You will then be able to boot into Froyo.
5) You will use ODIN again to install the Gingerbread update and flash just the PDA (leave CSC blank and leave Re-partition unchecked this time).
P1010XEUKPG
(Flash this the same way you flashed the Kernel in step #2)
6) After it reboots, you will have 2.3.6
7) (Optional) steps in post #2 to install CWM Recovery and Root.

I recommend installing CWM Recovery and CFRoot in the thread below:
ClockWorkMod Recovery for P1010
After you install CWM Recovery, you can do a nandroid backup and never worry about brick again! (=
Also, you can use ES Explorer to mount root and get rid of the Samsung bloatware (AT YOUR OWN RISK!!!)

For those wanting to remove the bloatware (AT YOUR OWN RISK!!!):
You can remove the bloatware with ES Explorer, there's an option to enable 'Root Explorer'. Download the latest version from the Market.
See below:
screenshots are from my Galaxy Nexus but it's the same for any Android 2.2+.
1) Go to the 'Settings' screen
2) Change home directory to '/'
3) Tick the 2 marks on the bottom
4) Browse to /system/app
5) Delete whichever app you don't want, but do it with caution (I usually move these files to /sdcard and move back if it causes any type of force close)
If you totally borked out the system in such a way that you can't boot, you can always move it back in recovery via ADB (much more complicated process but it's possible).
Also, why not do a nandroid backup before messing with deep system files?

Nice! Great topic.

Updated op! =)

this is the best christmas present so far.
edit: worked, almost. thanks ! rooted flashing Skin1980-CF-ROOT-P1010-BETA.tar .
skype isn't using the front camera. =s

Is this for any p1010? Will this work for us models?
Sent from my HTC Flyer P510e using XDA App

r_3 said:
Is this for any p1010? Will this work for us models?
Sent from my HTC Flyer P510e using XDA App
Click to expand...
Click to collapse
It's THE EU ROM but it works with my US P1010.

No restart issues?

r_3 said:
No restart issues?
Click to expand...
Click to collapse
If you followed those steps, the ROM runs stable without any FC's or reboots. I even have setCPU installed on mine.
Also, it's good to note that I'm running CF-Root kernel from the thread in 2nd post.
Plus, you could always downgrade if you run into issues. Just remember to always BACKUP YOUR DATA!

nice!
wow this is good news! does this modded skype work on this: http://forum.xda-developers.com/showpost.php?p=16889575&postcount=1262
or
http://forum.xda-developers.com/showpost.php?p=20697907&postcount=1640
?
I cant try it now as I'm not home. I hope someone could try as so I won't have to think about it until I get home..

@blue_algae: neither the front or the back camera works. tried v11 and v12. so far no luck

densets said:
@blue_algae: neither the front or the back camera works. tried v11 and v12. so far no luck
Click to expand...
Click to collapse
Could you attach the logcat here? or if you could send it directly to theos0o, that'll be great. he's the modder of the skype apps I pasted above.
could you also try this: http://forum.xda-developers.com/showthread.php?t=1153285 this works for me using froyo.

im getting excited about this.. is it really for the p1010 wifi only device? because from what i can see in this subforum is the devs working on the p1000 only. another thing, please don't tell me this is an official update. i don't think the bad sammy will update this little tab.

Depending on where you are freon yes it its the official ireland uk update and makes massive difference as well
Much better tab.
Sent from my GT-P1010 using Tapatalk

skype is working
@densets, skype is working for both skype mods I posted earlier. you just need to enable 'use valid preview'. for droidrx's version, set the app to 'crop' so your video is centered.

phew.. relieved by this news, nevermind if it is not going to be released here in malaysia, at least i can still skype with my family w/o much trouble into getting the ffc to work.

urra901109 said:
phew.. relieved by this news, nevermind if it is not going to be released here in malaysia, at least i can still skype with my family w/o much trouble into getting the ffc to work.
Click to expand...
Click to collapse
hmm, if you are still in froyo, you can use ffc on skype: http://forum.xda-developers.com/showthread.php?t=1153285
just rotate the camera and try out different settings.

sorry for the newbie question, but what's the password for the 2.3.3 file from sammobile?
edit: already found it, my bad

Interestingly, I've followed the guide exactly as mentioned above (had KC1 and the HK kernel from previous flashing) and flashed the PDA for XEU 2.3 from Sammobile, and I'm now stuck in an eternal bootloop. I like the new samsung boot music though, better than the previous one
Any suggestions?
Edit: I wiped data and cache from recovery, flashed KC1 and the Kernel and it boots fine. Checked Kies to be sure and it's offering me FW upgrade to KM2. Should I accept this FW upgrade or just persevere with flashing the new 2.3 firmware?

Aospa rom 6.0.1

it's finally released for our z3c!!!
http://get.aospa.co/official/aries
I believe need to unlock bootloader first before flashing so take note.

AWESOME!!! Thanks for the information!

Same process then? flash boot.img and zip from TWRP?
Edit: Everytime I do that, my phone doesn't boot. Be it with CM or other ROMs, and I have to flash a stock tft. I'm currently on Concept, since I've never managed to get CM working.
Edit2: tried to install but had to modify the install-script. My device was being recognized as "z3c".
Edit3: error flashing, same thing as CM. Flashing stock MM to see if it has something to do with using Concept before.
Edit4: can't enter recovery after flashing stock MM. Going back to Concept and not sure what to do next
Edit5: that's the error I get in TWRP
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

juliopw said:
Same process then? flash boot.img and zip from TWRP?
Edit: Everytime I do that, my phone doesn't boot. Be it with CM or other ROMs, and I have to flash a stock tft. I'm currently on Concept, since I've never managed to get CM working.
Edit2: tried to install but had to modify the install-script. My device was being recognized as "z3c".
Edit3: error flashing, same thing as CM. Flashing stock MM to see if it has something to do with using Concept before.
Edit4: can't enter recovery after flashing stock MM. Going back to Concept and not sure what to do next
Edit5: that's the error I get in TWRP
Click to expand...
Click to collapse
I actually have no idea what to do. I'm on a locked bootloader and I have never unlocked and flashed a custom rom on my z3c.
Was just, sharing some info and hoping people would test

matthiastan5 said:
it's finally released for our z3c!!!
http://get.aospa.co/official/aries
I believe need to unlock bootloader first before flashing so take note.
Click to expand...
Click to collapse
Thanks for info.

For anyone who already running this rom, how is it? Does the baseband and camera work (no fisheye effect)?

Arch9 said:
For anyone who already running this rom, how is it? Does the baseband and camera work (no fisheye effect)?
Click to expand...
Click to collapse
Neither one nor the other. All other things seems working fine.

juliopw said:
Same process then? flash boot.img and zip from TWRP?
Edit: Everytime I do that, my phone doesn't boot. Be it with CM or other ROMs, and I have to flash a stock tft. I'm currently on Concept, since I've never managed to get CM working.
Edit2: tried to install but had to modify the install-script. My device was being recognized as "z3c".
Edit3: error flashing, same thing as CM. Flashing stock MM to see if it has something to do with using Concept before.
Edit4: can't enter recovery after flashing stock MM. Going back to Concept and not sure what to do next
Edit5: that's the error I get in TWRP
View attachment 3786599
Click to expand...
Click to collapse
I get the same error 7 when trying to install PA. Ive tried modefying the install-script as you did but then i get error 6.
I flashed stock D5803_23.5.A.0.575_R11D_Nordic Generic_1288-5411.ftf and then flashed recovery to TWRP via fastboot but i still get the same error 7 when trying PA after that.
My next attempt is to install that NUT dual recovery and try flash PA after that.

Camera and modem not working

Got it installed (finally...). You need a working TWRP recovery.
What's working:
- WiFi
- Paranoid OTA seems to work; no further build available to try (doubt that it will work without recovery though; see below)
Not working:
- RIL (so no phone or SMS)
- camera
BT and GPS not tested yet.
To be able to flash you need to
- modify updater-script located in META-INF/com/google/android/updater-script (which is actually a text file) of the ROM zip
- open it in a text editor
- replace "aries" with "z3c", save it somewhere (delete .txt if it's saved with this extension; filename must be "updater-script")
- open the zip with 7zip (recommended; dunno if it works with other archivers)
- replace the updater-script with your version in the zip
- place the zip onto your device
- enter recovery
- Factory Reset (no need for a full wipe)
- flash it
- flash MM Gapps directly afterwards (OpenGapps not recommended - use Slim Zero Gapps instead)
- if you want root, flash SuperSU BEFORE rebooting (see below)
Recovery will be lost and can't be installed with TWRP Manager or Rashr after flashing (Didn't work for me - please report if you got it working and if so - how. Maybe with fastboot, didn't try that yet)
Happy flashing...
I'm sure issues will be fixed quite fast in later builds as everything works already in latest Carbon ROM (find it on testing.myself5.de). Maybe @Myself5 can help with that...(?).

juliopw said:
Camera and modem not working
View attachment 3786769View attachment 3786770View attachment 3786771View attachment 3786772
Click to expand...
Click to collapse
I flashed and it's same with you.It's not okay for daily driver.Also it overheats a lot.

Nice, they said they already fixed the mobile radio bug internally and will be releasing a new build soon

radio is fixed and currently fixing camera

From PA's official Google+ post:
We are also announcing that with the help of Sony and their Open Devices Project we will be able to support all 22 Xperia devices on the SonyXperiaDev GitHub Instance. This initial Sony release is for the Shinano family, but the Rhine, Yukon and Kitakami platforms are expected to follow shortly. This is really exciting news for us and it allows us to give you the Android experience we all love on a much wider range of devices.
Click to expand...
Click to collapse
If this is the case, maybe the camera will actually be usable? What do you think guys?
P.S. We should contact a moderator to move this thread to General forums, this is not development.

where is the zip file ?

ultraaslan88 said:
where is the zip file ?
Click to expand...
Click to collapse
It's removed for the meantime
That's because it had so many bugs
Wait for some more days for a better build

Anyone have mirror for last version?

Can i flash this rom on my z3c with SliMM 1.9?

GabrielVacker said:
Can i flash this rom on my z3c with SliMM 1.9?
Click to expand...
Click to collapse
You need unlocked bootloader for this

dont Found file
Wysyłane z Compacta za pomocą Tapatalk 2

G900-F: Used TWRP to install xposed framework, now stuck on logo screen

I used TWRP to install xposed framework v86. I clicked the reboot now button after flashing it. My phone was stuck on the logo screen for 40minutes before I took out the battery. Now whenever I turn it on its just stuck on that screen. I also flashed SuperSU before but my phone worked perfectly fine after that. I'm completely clueless so any help would be appreciated! My S5 runs on Marshmallow (6.0.1). I've seen people mention reactivation lock and mine says off when in the downloading screen if that helps at all

What ROM are you using; and also which xposed version did you flash? There are different xposed zips for touchwiz roms. You can try running the xposed uninstaller.

blubbermonkeys said:
What ROM are you using; and also which xposed version did you flash? There are different xposed zips for touchwiz roms. You can try running the xposed uninstaller.
Click to expand...
Click to collapse
I flashed xposed-v86-sdk23-arm.zip. I installed xposedinstaller_3.0alpha4.apk before. I can't put the xposed uninstaller onto my phone since my computer won't recognise my s5 unless its fully on (not in recovery mode or stuck on the logo screen)

username14 said:
I flashed xposed-v86-sdk23-arm.zip. I installed xposedinstaller_3.0alpha4.apk before. I can't put the xposed uninstaller onto my phone since my computer won't recognise my s5 unless its fully on (not in recovery mode or stuck on the logo screen)
Click to expand...
Click to collapse
Try put the uninstaller onto an SD card and flash from there? Anyways If you are running stock samsung touchwiz use this xposed build instead, as the official build is incompatible the samsung roms.

blubbermonkeys said:
Try put the uninstaller onto an SD card and flash from there? Anyways If you are running stock samsung touchwiz use this xposed build instead, as the official build is incompatible the samsung roms.
Click to expand...
Click to collapse
Unfortunately my phone doesn't recognise an SD card after my friends sim got stuck when he was using it on a holiday and he had to use a fork to push it out. Do you have any other suggestions?

username14 said:
Unfortunately my phone doesn't recognise an SD card after my friends sim got stuck when he was using it on a holiday and he had to use a fork to push it out. Do you have any other suggestions?
Click to expand...
Click to collapse
Well then. I guess you can use USB-OTG? Or you can try this to get it to boot, and transfer the files from there.

Just flash the same stock ROM over the top with ODIN

blubbermonkeys said:
Well then. I guess you can use USB-OTG? Or you can try this to get it to boot, and transfer the files from there.
Click to expand...
Click to collapse
Thanks. I followed this link (http://highonandroid.com/android-ro...android-in-a-bootloop-with-no-os-using-adb/2/) from the page and did everything it said. However when I put in
cd downloads
cd fastboot
adb devices
into the command prompt I get this back:
"'adb' is not recognized as an internal or external command,
operable program or batch file."
Do you know how to fix this so I get this screen instead?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

*Detection* said:
Just flash the same stock ROM over the top with ODIN
Click to expand...
Click to collapse
Thanks I'll give that a go

Thanks flashing a stock rom worked!
In case anyone comes across this thread having the same problem follow this tutorial and just download the S5 rom for your country/operator on sammobile:
https://www.youtube.com/watch?v=HVLyjeqPtn0