[Q] Streaming audio via Bluetooth - Vega General

Hi all, need a bit of assistance if you would...
I have recently bought a Vega, it is the stock 1.08 ROM which I have side-loaded Market etc onto... (had issues trying to flash custom ROM, but thats another story...)
My problem is when it comes to streaming audio via Bluetooth to my Samsung Home Theatre. The Vega discovers, pairs and connects successfully but only plays 2 seconds of music before disconnecting. I have tested the Home Theatre with my X10 and it works flawlessly so I know its not a problem with the equipment but the Vega.
Has anyone else encountered a similar problem and found a solution? Or could you point me in the right direction?
Thanks in advance!
Paul

Alright... so I've been doing a bit more searching and found an app called "Bluetooth Fix Repair". Dunno if it will work or not, but I searched the Market for it - only the donate version appears when searching on the Vega - strange... Found it alright on my X10.
So, can anyone upload the apk so I can sideload it to the Vega - or tell me where to find the apk on my X10. I thought it was in /system/app but I'm either not 100% of the apk filename, or it's not there...

Here you go!
If you apply the fix from my rom add-on thread it will show in the market
Here: http://forum.xda-developers.com/showthread.php?t=931337

Good luck with it!
Any help you need with that app, feel free to bother me
Cheers,
Phk

Thanks for your replies guys. I tried the bluetooth fix app, and it did improve the connectivity slightly - music played for about 4 seconds, stopped, played again for another few seconds then disconnected totally... arrrgghh!
So... possibly an issue with the ROM? Might need to wait for an update from Advent. Disappointing as I was hoping to show off my tablet for an upcoming party, but starting to look like my X10 will have to run the show instead!
Thanks again - if you have any other ideas, please feel free to fire them at me! (And I'll apply your patch for the Market later on, o-gman, thanks for that)

Damn.... I wish I had a tablet!
If you ran my bluetooth fix repair app, and then repaired, and then lost connection indefinitely..... The problem is with your ROM.
I made that program when i was on 2.1 and 2.2.. Now i'm running 2.3.1 and I don't need my app anymore. Also, when my app fixes the problem, it's only a temporary "dirty hack", so the problem will manifest itself again.
Sorry for not being able to fix it, but the problem remains in the blued.apk and bluetooth stack apk. It should be easy to change your bluetooth stack version, but i just can't make a program that calculates a version for each rom.
You should try (with a deodexed rom) to replace all bluetooth files from an earlier or newer rom.
Good luck mate,
Phk

Phk said:
... You should try (with a deodexed rom) to replace all bluetooth files from an earlier or newer rom...
Click to expand...
Click to collapse
Thanks Phk - while I understand, essentially, what you mean by installing the Bluetooth stack from another ROM - going about it is another matter. Would that be a difficult procedure? Can I rip the Bluetooth files from my X10, for instance?

Hi,
Two important things:
1) You shouldn't do it. It's complicated!
2) I can't help you all the way because we're not on the same HW\ROM
It really depends on how the stock roms for that device are released.
In my example, i have a Samsung Galaxy S GT-I9000 and Samsung's ROM are VFAT isos packed into Samsung's RFS containers, which means i can change my rom completely and then reflash it.
The particular apk files you need to test are everything you can find with:
"find -name *blue*apk"
from your "/" dir.
Anyway, first things first: You need to find a ROM that has bluetooth working! Then you will rip that ROMs bluetooth stack apks..
Sorry for not being able to fully help.
Regards,
Artur

Phk said:
... You shouldn't do it. It's complicated! ...
Click to expand...
Click to collapse
Says it all really! haha - I won't go messing about with the Bluetooth stack then, just in case I mess it up even more. Maybe the next update from Advent will cure my problem (whenever that may be...)
Thanks anyway guys!

Related

Missing FM Radio + GSen crashing on boot

Hi friends,
I purchased an unlocked version of GSM Touch Diamond from newegg.com while I was in US. I realised later that I could not find any FM radio in it. How do I know if its just hidden (though that would be absurd) or not present at all ? How can I get it, if it can be done (and I would assume a rom update) ?
Secondly, I installed the latest version of GSen, got it to be run at startup and when I rebooted my phone, it said that GSen would not start bcos of some damn error. I had to uninstall. Any ideas how I can get around this ?
My rom version is 1.93
Thanks,
Kunal
koolvirgo said:
Hi friends,
I purchased an unlocked version of GSM Touch Diamond from newegg.com while I was in US. I realised later that I could not find any FM radio in it. How do I know if its just hidden (though that would be absurd) or not present at all ? How can I get it, if it can be done (and I would assume a rom update) ?
Secondly, I installed the latest version of GSen, got it to be run at startup and when I rebooted my phone, it said that GSen would not start bcos of some damn error. I had to uninstall. Any ideas how I can get around this ?
My rom version is 1.93
Thanks,
Kunal
Click to expand...
Click to collapse
In order to 'unlock'the FM radio you need to replace your ROM with a cooked ROM that has it built in. There is no way to enable it without doing so. Also GSen is an old program and I never had much luck with it. I would recommend Gyrator2 as it is a much more stable and gives more options for customization. Hope it helps!! Both of these answers could be found in the xda forums with just a little bit of searching...
I was able to get the FM Radio without replacing my original ROM by downloading the radio cab file from this post -
http://forum.xda-developers.com/showthread.php?p=3099232
This could probably help others like me.
cheers,
Kunal

unlock GPS for Verzion xv6800 with stock Rom or with the MR1 rom.

First of all I would like thank Skywing for writing this GPS Application
Gateway for the xv6800 phone with stock rom or upgraded MR1 rom..
This thread is to show my thanks and to help new ppl like myself
find this app easer.. It took me about haft a day searching two forums
just to find what I was looking for .. so I hope this will help other
new ppl find what they are looking for much easer ..
Again this application was written by “Skywing” and someone wrote
the easy install CAB for his app .. also like thank “gc14“ for writing
the tutorial ..
This Application aGPS aka GPS Server aka (Valhalla Legends GPSServer.cab)
Will allow your 100% stock rom or MR1 rom on your xv6800 Phone
to access GPS signal via 3rd party application e.g. MS Live search, Google maps etc..
without the need to unlock the phone or do anything to the phone other than
simply loading the GPSServer.cab file ..
For step-by-step install info. go to: http://wiki.xda-developers.com/index.php?pagename=VerizonAGPSFix
To download the CAB go to: http://rapidshare.com/files/165096506/Valhalla_Legends_GPSServer.cab
Show your thanks to Skywing, go to his thread: http://forum.xda-developers.com/showthread.php?t=424387
I have personal testing this code on my xv6800 with stock ROM, then I
upgraded to the MR1 ROM from HTC for the xv6800 with WM 6.1 and
install the GPSServer.cab and it works perfect for both ROMs without
doing any unlocking or running anything else other then just the GPSServer.cab
BTW for anyone with the stock ROM running WM 6.0 and would like to
upgrade to Windows Mobile 6.1 .. you can download the MR1 ROM direly
from HTC
Again this is the, Verizon XV6800 ROM MR1
Release Date: 2008-08-23
go to: http://www.htc.com/us/SupportDownload.aspx?p_id=82&cat=2&dl_id=99
If this link does not work you may need to set your “country” first, (top right of the page “select country” set to “United States”
wow .. update: also found out that gc14 made the CAB file as well..
Thanks again gc14
gc14 post: http://forum.xda-developers.com/showpost.php?p=2625473&postcount=113
Thanks! It works very good with Google Maps
Is your WIFI works with WM6.1? After I installed MR1, my WIFI is not working anymore. I hope you might be able to help me.
TIA
to all that created this thank you, works flawless on the stock mr2 rom
can't get it to work..
Hi all! I followed this method a while back and had Google maps working great for quite some time! This past weekend I tried to use it with GPS and it couldn't find any satellites. I figured it was maybe too much cloud cover or other interference related to my location. Anyhow, yesterday I updated my XV6800 to MR2, installed the latest Google maps (3.0.0.12) and still cannot get it to find any satellites. after playing with the COM ports and location setting (currently COM4 and Loc ON) without success I installed GPS Toggle, which also cannot find any satellites.
Anyone have any suggestions to get this working again? Does this even work with MR2? I'd be happy to go back to MR1, though MR2 seems to be a little smoother and faster.
Thanks!
Bugsy68 said:
Anyone have any suggestions to get this working again? Does this even work with MR2? I'd be happy to go back to MR1, though MR2 seems to be a little smoother and faster.
Thanks!
Click to expand...
Click to collapse
Read the last couple of pages
http://forum.xda-developers.com/showthread.php?t=424387
thanks drewcam888. I'll check it out this afternoon and let you know how I make out.
BTW, I was looking around my device and I found a different version of gpsapi.dll (hidden) in the Windows directory. I'm thinking this may be the problem. It won't let me modify it though, as it's a system file. I can view it using SKTools, but not modify it.
Can you recommend a file manager program that'll let me move / copy / replace system files?
Thanks!
You can't modify a rom file or one that is created by the rom itself. Or at least I don't know how
Hello,
I'm pretty new here and new to the XV6800. I have a rom version that I downloaded from htc site that under device info reads 3.57.605.1 I don't know what MR1 or MR2 is or is mine an MR3?? Also I have a Radio version of 3.37.75?? My question is can I install this to get GPS or AGPS working on my device? Do I have to install a different radio to get it working?
Thanks,
Chris
cdeleoxda said:
Hello,
I'm pretty new here and new to the XV6800. I have a rom version that I downloaded from htc site that under device info reads 3.57.605.1 I don't know what MR1 or MR2 is or is mine an MR3?? Also I have a Radio version of 3.37.75?? My question is can I install this to get GPS or AGPS working on my device? Do I have to install a different radio to get it working?
Thanks,
Chris
Click to expand...
Click to collapse
Read the thread for a while that drewcam8888 lists above "adapter program to ......" and then make sure you change the registry settings as it describes for Valhalla in the posts from the past couple of days. I believe I posted #627 which has the places to edit for Valhalla. Listen to what others say to make sure you have everything right.
mine failed around the same time but using a different set of cab files which had worked flawlessly on both previous installs of MR1 . Is this perhaps something from verizon?....Anyway having not installed from a wrar file before how do you install the valhalla cab when the redirects disconnect from the server?
I have a xv6800 and i got it last week, the person that i got it from updated the rom. a couple days ago i cleared the storage, which i guess is a hard reset, but i wanted to know if that resets my Rom
thanks
Tyve
resets to a fresh install of your current rom. It removes all none rom files.
so do i hav to re-hack the rom to use google maps?
i have no idea wut im doing,
thanks
Yes you do
dang, that sux. thanks a bunch
my ROM version is 3.57.605.2 does anyone know if that is hacked or not?
Not it is stock verizon MR2
ok, do u know an easy way to hack it, im only 14 and i suk at hacking it

614c radio firmware v0.89 (and a solution to the call waiting problem) WITH LINKS

Good news!
hp have packaged up 614c radio firmware FW v0.89 and are shortly to release it. Early indications are that this provides a fix to the "call waiting problem", as well as improved in-call volume in both directions... and presumably other minor fixes.
A radio firmware upgrade can be performed irrespective of whichever system ROM you are using - so whether you use the original WM6.0, or a WM6.1 version, you can still apply the radio firmware upgrade without affecting the operating system or OS ROM version.
However, the upgrade will automatically perform a clean boot, so take all the necessary backups first and be prepared for a couple of hours of effort to "rebuild" your precious ipaq...
hipppo,
It is realy good news, but could you, pls, place some link to this 0.89 firmware upgrade or write its SP version? Cannot find it at HP site, maybe I have some wrong search method
BTW: as to some your prior post about Yevg001's tests with loosing data connection when voice comes - he couldn't test it in Moscow because he lives in Jerusalem But as I know he works there just with 3G, just maybe he didn't test this feature... But now he sold his 614c so we cannot count on new OS releases from him. Maybe not definitely but it something appears then it will be not tested from now :-(
oh wow, that's huge. Lets hope they release this thing ASAP.
Sorry for misunderstanding... afraid it will not be too quick looking on their speed...
If anyone will find how to downgrade firmware to 0.77 or its SP name, pls write...
I now have the radio firmware v0.89. It works well.
The call waiting problem is not present. It is possible to use voice and data concurrently. I haven't noticed any problems yet.
If someone can show me how to make a file available for everyone, I will post it. The radio firmware is about 6Mb and an additional patch (0.25Mb) is required to resolve the call waiting problem.
hipppo
And by the way this is an official hp firmware pack... with the standard hp executable that patches your radio firmware to v0.89. No messing around with SD-cards or flash files is required, it just runs through a USB/activesync connection.
It does not affect the OS firmware - whatever OS ROM image you have (whether WM6 or WM6.1) will not be affected.
However, it will cause a clean boot so you'll need to reinstall any non-ROM software and data.
hipppo
hipppo said:
I now have the radio firmware v0.89. It works well.
The call waiting problem is not present. It is possible to use voice and data concurrently. I haven't noticed any problems yet.
If someone can show me how to make a file available for everyone, I will post it. The radio firmware is about 6Mb and an additional patch (0.25Mb) is required to resolve the call waiting problem.
hipppo
Click to expand...
Click to collapse
upload here my friend or u can upload to 4shared or mediafire
If it doesn't affect the OS rom, why is it doing a clean boot?
Hippo, mail it to me [email protected], I'll find a way to upload it. Is it fixing the auto shutdown issue btw.
hipppo said:
And by the way this is an official hp firmware pack... with the standard hp executable that patches your radio firmware to v0.89. No messing around with SD-cards or flash files is required, it just runs through a USB/activesync connection.
It does not affect the OS firmware - whatever OS ROM image you have (whether WM6 or WM6.1) will not be affected.
However, it will cause a clean boot so you'll need to reinstall any non-ROM software and data.
hipppo
Click to expand...
Click to collapse
hi hipppo,
but who gives ou this radio fw? or did HP return you a 614 with radio fw 0.89?
hipppo, use free www.rapidshare.com upload (free temporary storing for files smaller than 100MB) or axlastro proposal, asap
No matter how it work and what after cleanboot - we will check it quick
hipppo, what about mentioned low audio signals level fixing? Is this also corrected in this upgrade?
hipppo
It is a very good news. Please, send it to me via mail (sergiorus#gmail.com), i will integrate it to Yevg001 ROM.
For gmail it must be compressed with 7-zip or other not serviced by gmail. Each exe, also compressed with rar/zip, will not be transferred by gmail....
Netzmark said:
For gmail it must be compressed with 7-zip or other not serviced by gmail. Each exe, also compressed with rar/zip, will not be transferred by gmail....
Click to expand...
Click to collapse
Well i just compress it with RAR and rename the file *[email protected] - and voila , gmail is tricked. I was actually going to put it in free rapidshare too or on ipmart. I hope they fixed the ipaq shutting down at 30% but probably they haven't.
Excellent news!!!
I wasn't able to find it on HP webpage.
Could anyone send it to me please?
[email protected]
Very much appreciated.
Dan
axlastro
Try to download and install SP38904, as wrote our friend jovanny from 4pda.ru, it fixes this problem on some 614c devices. Bootloader should be then 1.01.00, not 1.01.05. Pls know that as he fund it is the problem of some incompatibility of 1.01.05. with some hardware subversions of 614c. SP38905 works already wrong, seek just for SP38904.
axlastro, where is this link to 0.89???? . Understand you have this already?
Nope, i don't have it, I was just referring to my proposal to hippo to e-mail it to me and I wrote i was going to use rapidshare to upload it, when i have it. I don't have it. Sorry, must be my bad English
Sorry, you wrote "Well i just compress it" and I was full of hope that "it" is "it" - it means 0.89 .
However try this SP38904 to solve your 30% battery problem.
Thanks. I will Does it have sopething to do with the sd card? I use a sdhc 4gb - could it be the card causing the promlems. Sorry for the offtopic. Hippo c'mon give us the 0.89 we need it so bad.
No it is HP upgrade executed by usb.
It is available here:
http://h20000.www2.hp.com/bizsuppor...9337-1&prodTypeId=215348&prodSeriesId=3544356
hipppo, don't sleep, pls

[Question] How to test GPS hardware...

Hi all,
suddenly my GPS is not working anymore. Can enable GPS and it says it is ok. But when i want use Google Maps, or navigation program the icon in taskbar is not there anymore.
Did try GPS Status, nothing....
Did a fresh rom install and wipe everything i can wipe.. nothing not working.
now i want to know is there a tool or adb option to test the hardware if this is still working.... (maybe GPS is broken)
Thanks
Did a RADIO rom flash with the one i already had on my HTC... and problem solved....
Still wondering how it can happen that maybe the radio rom was getting crazy...
had the same problem two days ago, same solution... same no idea for the cause
this kind of strange things was my idea only for windows... suddenly it is not working anymore.. But.. Solve this problem was mutch easier haha
This seems to happen whenever you flash a 2.1 ROM. Even going back to 1.5 doesn't fix the problem and a new radio flash is required.
Regards,
Dave
Test program
Try GPSTest from market.
Hallo.
My GPS also stoped.I try to find prog to chek GPS module (My device now is HTC HD2 china clone), but maybe this prob is also mine.
Please, explane, i did not understand about this radio rom flash...
Many, thanks.
NORU said:
Hallo.
My GPS also stoped.I try to find prog to chek GPS module (My device now is HTC HD2 china clone), but maybe this prob is also mine.
Please, explane, i did not understand about this radio rom flash...
Many, thanks.
Click to expand...
Click to collapse
Every now and then manufacturers like HTC will release an update to radio which controls your wifi, data, blutooth. If your current radio is having problems, you will need to update it. Most of the time new radio is included with the update but you can Google individual files as well, hope this explains

Rom beta test version expired...

Hi guys,
Yesterday my phone started to show the following message:
"This concludes the beta test of this software release. Thank you very much for your time and effort in helping make this a great product for our customers."
At the moment I cant sync my phone at all.....
Yesterday I lost my touch pro so this comes at a very bad time
I searched but coulnd find a working solution, hope you guys can help me.
Ty anyway.
Where did you get this ROM from? Or was it already on your phone when you bought it? Where did you buy the phone from?
m0nkm0nk said:
Hi guys,
Yesterday my phone started to show the following message:
"This concludes the beta test of this software release. Thank you very much for your time and effort in helping make this a great product for our customers."
At the moment I cant sync my phone at all.....
Yesterday I lost my touch pro so this comes at a very bad time
I searched but coulnd find a working solution, hope you guys can help me.
Ty anyway.
Click to expand...
Click to collapse
Hi i experienced this before with a cooked rom, the only way is a hard reset, and do not change the date and flash another rom
Thanks, hard-reset works. Flashing now.
Lost my pictures but ok my stupid idea to go to custom roms
Did you use the volDeus Transparent bars and HQ BG Tweak. If so a few people have been experiencing this due to a TimeBomb in some of the shell32.exe and aygshell.dll files. You need to get the correct unpatched versions of these files from your base rom.
ClydeB1 said:
Did you use the volDeus Transparent bars and HQ BG Tweak. If so a few people have been experiencing this due to a TimeBomb in some of the shell32.exe and aygshell.dll files. You need to get the correct unpatched versions of these files from your base rom.
Click to expand...
Click to collapse
I used an Energy rom for about 3 months I guess.. Cant remember the build etc. Seems that I have to flash more often
Yeah, the MS time-bomb must be removed by the chef.

Categories

Resources