Second Camera for Video call - eXpo GW820, GW825 IQ General

I found my LG LW 825 (Telus) have second camera for video call. But this camera can not work. I looking for software dial. May my LG can do it?

I am not sure if this will work, but get a registry editor. In the editor go to HKEYLOCALMACHINE->comm->connMgr->Providers one of the folders there will contain "Connections". Find "Video Sharing" and change enabled from 0 to 1. Try to make a video call after that

I think that, if make a video call, on the calling pad, having the function Video call. I need the software to install to replace dial pad present.

Are you sure you have a Telus GW825 and not a HK GW825V? I have the Telus GW825 and I don't have a second (front) camera.
If you flash a GW825V ROM to your phone, you can test the front camera (if you have one). Press the icon (swap camera) at the bottom left of the screen in the GW825V camera application.
TrueG

trueg said:
Are you sure you have a Telus GW825 and not a HK GW825V? I have the Telus GW825 and I don't have a second (front) camera.
If you flash a GW825V ROM to your phone, you can test the front camera (if you have one). Press the icon (swap camera) at the bottom left of the screen in the GW825V camera application.
TrueG
Click to expand...
Click to collapse
As i may know, Telus LG Monaco GW825V, AT&T LG expo GW 820. But GW 820 has not 2 nd camera (front camera).
My GW825 has the front camera but has not the dial pad or camera pad has not the switch key between two cameras.
Let me know the cook room or the mod room for my LG wich running stable?

Related

Bigger "phone" screen?

Is there any skin that gives me bigger buttons on the "phone" screen that are better for dialing for those of us with big fingers? I don't need to see my provider, the last call, have the video button, etc.
Search for the E-Ten dialer skin. this works a treat....
Give Imaginet-Fingerclix a try, though it is not free but I recommend it strongly
Regards

[Q] Videocall remaping..

Hello, did anyone figure out how to remap keys for Videocalling intol something like just "call/end" buttom? Also im have yet to see images of the "US Diamond" but seeing how it doesnt have a front camera was the videocall button replaced with something else? If so was it an end/call function? Because if that so i need to find a rom to port system file or something to UK diamond to get raid of it.

problem with camera app

Hello !
I'm using an HTC Touch HD French version for 2 weeks now and a got a problem with the camera.
First it was working fine, but after a few days without using it I try again and a cannot take picture in photo "standard" mode. Between this of course I add a lot of app on my HTC so maybe one of it had create the problem.
The point is:
If I take a pic in "photo mode" it take the photo correctly and then after 1 sec it was taken the loading logo appear on the screen and the app stay like this for a long time (more than 1 or 2 min). I can go back to the TF3D by pressing the "home" or arrow button but in any case the picture was not saved on the phone memory anywhere.
But the more curious thing is the following. If I take a picture in another mode it work perfectly !!! "contact's photo mode", "Landscape mode", "Theme photo mode" (sorry if their are not the accurate name, I don't know them in the English version), I try all of them and I had no problem with it.
About the app I install on my HTC, the only one that should use the camera is Quickmark (for reading QRcode) it work very fine and I don't think it's making the problem.
If anyone had the same problem or has an idea to help me fixing it, thank in advance for helping me !
i have this exact same problem. it started happening today after doing the registry tweaks to allow the extra camera modes. i haven't tried other camera modes yet. i'll give it a go now and see if it's the same as you.
edit: that's so weird! all the other camera modes work... but when i go back and take a standard photo i get the spinning logo for a 1-2 minutes.
what programs have you installed recently? or since you last had the camera working? have you made any registry edits?
i changed the settings so that it doesn't review the picture after you take it (default is 3 seconds). and now it goes to the spinny logo right after you take picture, that makes me think its a problem related to saving the photo to the device. im gona keep fiddling
Thanks I'm not the only one with this problem.
Actually I've install so much things... the problem is that I was not using the camera a lot of time so I cannot set precisely witch program could have made the problem. But if it's about writing the files in the memory, I don't really know was could create that, I've no special program about file managing or so.
For exemple I have: Quickmark, GPRS NoData, Advanced config, Coreplayer, fring, Gyrator2, TomTom7, SecureW2 TTLS Client 4.0.0, WiDiFoFum2, WMMiniGPS, Metro, PocketUno, SimCity2000, FakeCall, other app are small stuff...
EDIT !!! I've just add the hotfix and desinstall an application that was not working (ResPhone) and now the problem change. I can take the photo, it same to work good again, but when I go to the album all the picture taken are a BIG JAM of pixels (purple, white and green!!) and it's still only in "photo mode", other modes are working fine like before !
And now i was just doing so test and the problem come like before again ! Amazing, I'll be crazy !
i fixed it! man i was just about to do a hard reset and all...
i went into advanced config and reset the camera settings back to default. i think i had changed the settings: encode photos in portrait mode, capture key delay and key delay. put them back to normal, soft reset and it all works again
it will be interesting to see if you had changed settings in advanced config as well.
Thank you ! it seems to work again.
I'm not sure I changed some stuff about camera in advanced config but anyway now I set like this and it work:
encode photos in portrait mode: NO (the program seems to do it anyway)
capture key delay: enabled (default)
key delay: enabled (default)
Hope it can help others too.

three qustions regarding beta 2 of touchflow 3D

Hi I have installed installed touchflow 3d beta 2, because the camera didn't work in beta 3 so anyway....
1) then I start the phone firstly then I switch to camera and press either the camera tab og the videocam tab they both start the camera.
How do I get them to start their respective functions?
2) The album feature doen't work propperly either. It only displays the bundled not picture not pictures from the camera, and if start the album feature the phone freezes.
3) I installed the AnX1 Landscape mod on the phone, but why are they shown as a program in the programlist?
Cheers,
Frederik

HTC Default Registry Settings

Hello everyone. I've got the HTC Pure (I think it's the same as the Touch Diamond 2). I was reading through some other posts about registry tweaks to improve the performance of the camera, unlock picture modes, increase photo quality, etc. All of the tweaks seemed relatively harmless to the phone, and the only risk was to the camera if something didn't work.
Well something did not work, but I'm not sure what it was. Some of the tweaks worked fine (like unlocking Sport and Burst photo modes). However, now whenever I take a regular picture with the camera the phone freezes when it displays the picture I just took. The only thing I can do at that point is press the "end/hang up" button to return to the main Today screen in TF3D. But then when I return to the camera app it won't load, and the picture I just took was not saved either. If I run the cleanRAM app, the results show between 1-2megs freed up, then the camera app responds again, but still the same end result.
I've reviewed all the settings in HKLM>Software>HTC>Camera and everything there and in those subfolders appears normal. But I don't remember what the settings were originally. I'm hoping if I return the camera registry settings to their default values this problem will be fixed.
Does anyone have a list of the default HTC camera registry settings? Also, what are the other registry keys that affect the camera besides the folder where I've been looking?
If I were you, I'd re-post this thread into the TD2/Pure forum. Some folks there with a Stock ROM may be able to help you out.
Thanks. I will try to figure out how to do that!

Categories

Resources