[Q] NAND Recovery Option´s on Crashed Android - HD2 Android Q&A, Help & Troubleshooting and Genera

so maybe a stupid Question but can someone tell me something about the Recovery or Hardreset option´s .
Just for the case i make some " mistakes " on the Android-System after a few day´s ,
and it will no longer work and there is no way to Connect to an PC to flash a new one.
So the Question how about the Recovery Option´s ( Hardreset )

any experience ?

no recovery option yet. may be you can reinstall the system again?

Related

please help!! after ROM upgrade the device stuck completely!

please expert guys help ...
i have new leo with ROM 1.43 today after trying to upgrade to ROM 1.66 I did everything as asked, the installer began , with all the colours on the leo display then it started the percent completion counter , and after 2% it wrote me error something , and the leo restarted but stuck in the white start up menu with the green HTC icon and below the R G D information but the device doesnt proceed further and stuck here !!!
please help !!!!
it write me as i recall
it wrote me if i recall right :
INVALID MODEL ID
did you install HSPL before trying to install the ROM?
no i didnt try to install anything !
no i didnt try to install anything ! , just started the intallation file ROM arabic-english , and did what i asked to do !
if i didnt install hspl what can i do ?
can i take the device to the shop i bought it from and use the warranty ?
well, no...did you get the file from HTC direct or off here? your phone could be vendor locked to your provider so if you can get the original ROM that was on your phone you can flash that back on...
you should really read into things before jumping in at the deep end...
well i have an inlocked device ...
o bought the device in europe , but i am from israel , htc sent me notification about new arabic ROM with link , i tried with my serial to download but couldnt , it wrote me "this upload not compatible with ur device" , i downloaded it from here XDA developers , but it went wrong !! , the problem that the phone stuck in the loader menu , before uploading the sense interface , and i have no connection between the pc and the phone "no active sync" so how can i reinstall the older version or make the phone load again ?!!?!! plz help !
you need the original ROM and a connection to your PC. run activesync as even not working it should connect up...
no there is no connection the device centre says not connected
the phone is not responding and the pc doesnot establish connection with it , i am stuck with loading menu with the R 2.04.50.22~2
G 15.26.50.070
D 1.43.7024
from there nothing moving , if i do soft reset it , it stucks again in the same menu !!!
i didnt install HSPL , and i guess i tried to install not the correct region ROM upgrade , the phone was purshased in lithuania , but htc offerd me middle eastern ROM because i want the arabic - hebrew support !
plz help
You could try installing the Shipped ROM via microsd card method. Just make sure your battery is above 50%. then follow these steps:
1. Using 7Zip, Open your Shipped ROM.exe (You need your exact shipped ROM for this, anything else will give you the error you got)
2. Look for the "RUU_signed.nbh" (without the quotes)
3. Copy RUU_signed.nbh to your microsd card AFTER formatting the microsd as FAT32 (quick format works well enough, using Win 7)
4. Rename 'RUU_signed.nbh" to "LEOIMG.nbh" (again, without the quotes)
5. Take out the HD2 Battery and insert microsd card in slot.
6. Put Battery Back on and hold the "Vol Down" key while pressing the Power key
7. Follow the instructions on the screen... (remember you need at least 50% battery power just to make sure everything goes as planned)
8. Soft Reset after your done and you have a "Fresh" Shipped ROM on your HD2!
Optional:
9. Install HSPL (use the guide that's been stickied in the ROM Dev Section)
10.Flash the ROM of your choice via MicroSD method or activesync (again, please read the Stickied guides in the ROM Dev Section)
Good Luck!
total storage 328 instead of 180 !!!
well i didnt need anything to do, i pressed and hold the up vol. and down volume and pressed the power key , it did a hardreset and my old ROM back to me , though i noticed strange thing !!!
after the hardreset back to my old ROM i checked the SD card & phone storage and i found that i have now total storage 328 instead of 180 !!!
but then i upgraded my ROM this time with legal one from HTC support site , and the total storage got back to 180 again !!!
anybody knows what happened here ?!
p.s thank u guys for the help

[Q] htc Tatoo only restart with logo

hello i have in hand a htc tatoo who only restart and show TATOO and restart again , any help please ? thx
Try out flash boot.img if not work restore nandroid backup or install new ROM
please im newbee can u post here a method thx
You can find all info you need here:
http://forum.xda-developers.com/showthread.php?t=821004
the phone is just stuck in a boot-loop; first try to do a wipe from the recovery if the problem persists .. install a new rom.
I hope to check out was useful to you.
click thanks please
acore.process.stopped
Hi,
When I turn on my tattoo it goes to aeroplane mode and then acore process stopped. Any advice?
to be honest booting in TATTOO only is the best ; take less time and doesn't drain the battery
Connect your phone with PC via USB. Enter the recovery, and place boot.img file on your SD card.
Re-install ROM and it should boot up with in no time.

[Q] cant flashe any virsion

hey guys im new here so bare with me...
i have a problem with defy , the story start with miui that i try to install and the cable went off during the install, since than i cant flash .
the battery is dead and i couldn't go to boot loader, somehow i mange to turn the defy on with the McGravier method , and the only screen i can see is the boot loader , the rsd lite revile the phone but any flash that i try to install finish with error code like this, error verifing code group 33/39 and ect' .
i try any sbf rom from virsion 2.1 to 2.21, 2.2.2, 2.3.3, 2.3.4 and i try to install and flash the phone on any windows xp vista and win7 ,and on a diffrent pc ,why its always finish with fail in the rsd program its mange to go to 100% and than its fail all the time.
plz help im hopeless
thanks
Where did you buy your phone?.
What was your original rom?
hey , i buy my defy in israel and the virsion was 2.1 with modifiction of opertor like virizon - in israel its call cellcom , what to do ? what version i need to install ?
help anyone ?
I know you said that you cant get any other screen but...
Can you get into recovery menu?
Remove Battery, Press VOLUME DOWN and POWER and then plug in the battery. ( HOLD THE BUTTONS!) after a while , an android with a warning triangle shoud appear.. maybe try wiping ? ( if you can )
hi ; thanks for the help man , but i cant get into recovery mode i try your way and nada
i found the rom that i try to flash for the first time for miui maybe it will help u ?
JRDNEM_U3_3.4.2_177-005_NORDIC_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTNORD_P003_A001_HWp3_Service1FF.sbf.gz.crdownload

[Q] pls i nead hellp solved

hi ppl sorry post for hellp , but my hd get stop on boot loader it dont pass the smart mobility logo , and loop.
it starts to do this by it self, 1ª it look like dont charge, them gets on loop.
it on stock rom, i never update im. it was original.
1ª i start for update im to the last stock rom RUU_BlackStone_HTC_PTG_1.56.410.0_Radio_52.62.25.34_1.13.25.24_Ship
it did it ok and it get on loop again.
2ª i did HSPLWrapper_Blackstone_156OliNex , so i can use other roms to test
3ª install 1ª Blackstone Premium EDGE V4.3.1 and the same then Blackstone Swift EDGE V4.3.1
and i have the same , the only difference its the boot logo now i have htc smart mibility but it get stopped
any 1 have any idea how can i solve the problem.
at this time i think its an hardware problem but if any 1 have any idea, i will tray any thing, because its not on warranty i will tray any thing first .
sorry for my bad English and thanks in advance.
Edit:
Problem solved
like i think before the flash was with any kind of corruption i think?!!!
i have tray use task 29, but it wasn't working, so i take a last chance option.
i use HSPLWrapper_Blackstone_156OliNex as flasher but instead of 513k ruu_signed.nbh that came with, i use blackSTONEhengeHyPerSlim_4_8 as image to flash, i use this 1 because its short and have all flash "sections" boot , os , radio etc etc.
note the HSPLWrapper_Blackstone_156OliNex i was already flashed , i was the only way i can get coked roms flashed.
Now my blackstone its alive again, i have a little understanding on programming and hardware i did it on my one risk but it work and its a simple trick, and maby hellp any 1 ho have the loop like i was , and only can get in SPL mode.
my Touch HD it was virgin i was never bin flashed or any other kind of change

[Q] Bricked ????

hello guys
after spending hours and days trying to fix it i have no more ideas ...
Several Problems:
Just without any reasons one day i was not able to start the tablet ....
only the boot screen was shown and nothing more...
so i flashed it with a stock rom , doesn't remember the version after booting it shows the message : all pre-install processes complete ! enter your passwort :
.
i ve never entered a passwort so it makes no sence for me ....
after that i tried to install another stock rom: copied an update.zip to the xternal sd card , but when i start the recovery it only shows the green android guy with exclamation mark ..
so far so good no way to enter android because of the missing passwort, no access to recovery mode , to load the update.zip doesn t work , also hard reset doesn t work ...
maybe somebody can helb me how to use the update.zip with the external sd card correctly ... i think his must be the right way ..???
or is there any possibility to install custom recovery without entering android ?
hope somebody can help ..
thank guys
regards

Categories

Resources