Is it possible (ofcourse everything is possible) to avoid beeing prompted with the device lock and the timer ? Without taking an hardreset and loose all data...no application or tty hacks when connecting in boot mode ?
Start -> Setting -> Lock -> Prompt if device unused for xxx
Device Lock IS allready activated
Yes, I know - but in this case the lock is activated. The owner thought she assigned same PIN as SIM-PIN, but no..so is there a trick - for instance connect K-JAM in Boot mode, run an app from PC and NOP some bytes?
Oh, you mean you are locked out and forgotten the password. No, there are a few similar cases in this forum (do a search), there isn't any way of solving this without hardreset.
I have not found about this.So, i thought i should make a post here about how to find your Device ID without searching in Registry.
There are a few steps only & they are idiot proof.The regular method posted in the official & some other threads can give you more than one DeviceID for your Phone if you have plugged the Phone in different USB Ports.
Even searching in Registry can give you more than one DeviceID if you used multiple USB Ports.So, in that case you will need to know which is the correct deviceID for your model & this does not involve searching in Registry.
1) Install SEUS ( Sony Ericsson Update Service ) from the official website.
2) Install the Update Software while your phone is connected to your machine.After installing the Software , Disconnect your Phone from your Computer & start the Update application & follow the prompts.
3) Put your phone in Flash Mode.
4) A Green light will turn on while your phone is off if you have done it properly which is shown on the above picture.
5) Now press your Keyboard's Windows & Pause Break buttons at the same time.And go to Device Manager.
6) Expand the " Universal Serial Bus Controllers " & Click on " SEMC Flash Device " .
7) Now from the SEMC Flash device window, scroll through the value of " Device Instance ID " .
8) There you will get your DeviceID.Just highlight & Ctrl+C & Paste it in a Notepad.As you know the last parts are your DeviceID.
In this way you will not search into registry & you will get the correct DeviceID every time you connect your Phone to your machine in the Flash Mode.
Thank You.
Mod. edit: not dev related, moved to general
thx for sharing
I've got a T-Mobile Omnia 7 and need to unlock it, and I've found insructions for using Samsung Professional Tools and a USB cable to do it, only I don't want to try it and brick my lovely new phone!
Has anyone else unlocked an Omnia 7 using this method successfully?
Apologies if this is discussed elsewhere. Thanks.
Unlock Samsung i8700 Omnia 7
# Download and save it on your PC SPTCARD997(Samsung Professional Tools)
Dial ## 634 # and press call to enter Diagnosis Menu
# *# 7284 # and choose "Modem, USB Diag"
# Click OK to restart the device
# Connect the device to the USB
# Start SPTCARD997, select i8700.
# Choose SAMSUNG Mobile Model Diagnostic Serial Port
# Select unlock and click the Factory Mode.
# After the procedure, the phone will ask for code, dial 00000000.
(translated from a Russian forum)
OR
After step 4, run i8700 WP7 downloader, put your phone in download mode with three button combo vol up+camera+power on, and upgrade firmware downloaded from the forum or samfirmware.com
Don't work for me, errors looking for a card reader...I assume you need another piece of hardware for it to work?
know nothing about SPT tools..
Lordao
Did you try updating the firmware in download mode?
mughalgxt said:
Did you try updating the firmware in download mode?
Click to expand...
Click to collapse
I don't want to update the firmware just unlock it.
Lordao
I did IT
I did unlock mine here.
http://www.unlocksamsungonline.eu/manual/Unlock-and-repair-by-cable/I8700
I bought credits for 15€ then unlocked it with success.
I took me 10 min with a standard micro usb cable abd the SRS tools
Sorry i haven't used this samsung Professional Tools to unlock the Mobile Phone.But i here suggest the unlock code method that will unlock the mobile Phone easily and step by step...You can buy the unlock code at here Onlinegsmunlock.com/samsung/rs7wp8/ and unlock it using the unlocking instructions...
Tools not working
mughalgxt said:
Unlock Samsung i8700 Omnia 7
# Download and save it on your PC SPTCARD997(Samsung Professional Tools)
Dial ## 634 # and press call to enter Diagnosis Menu
# *# 7284 # and choose "Modem, USB Diag"
# Click OK to restart the device
# Connect the device to the USB
# Start SPTCARD997, select i8700.
# Choose SAMSUNG Mobile Model Diagnostic Serial Port
# Select unlock and click the Factory Mode.
# After the procedure, the phone will ask for code, dial 00000000.
(translated from a Russian forum)
OR
After step 4, run i8700 WP7 downloader, put your phone in download mode with three button combo vol up+camera+power on, and upgrade firmware downloaded from the forum or samfirmware.com
Click to expand...
Click to collapse
Have anyone tried these?
I just cant get SPTCARD997 to work, even tried the actual version of this program. On windows 7 when i start the programs they exits right away without any clue, or error message. In xp they want some sort of storage card, and the program window behind the error message displays the text content with question marks, like the text was from another charset. I dont believe it, i even tried them on freshly installed windows x86/x64.
And the solution with the rom. My phone left locked after jj6 rom, so i dont think switching the rom is gonna solve the lock problem.
Can somebody help me?
What kind of unlock do you want? For developer and interlop unlock you can use this:
http://forum.xda-developers.com/showthread.php?t=1407652
hatuna said:
What kind of unlock do you want? For developer and interlop unlock you can use this:
http://forum.xda-developers.com/showthread.php?t=1407652
Click to expand...
Click to collapse
I want a sim unlock.
Hi everyone,
Guys i need to enter to inside the hide menu.
i try *#22745927 *#7284# but dint work
i dont now how can i enter the code but i need the change my usb settings (like RMNET + DM + MODEM)
sorry for my english. have a god days.
Try entering *#0808# on your dial pad.
Instruction for users , who have problems with bad nv items for lg e900 optimus .
Maybe this procedure repair your bricket lg phone , this is the best method to fix your wrong ,resetting phone (when show only lg logo ,nothing more , you must know that , your "umts nv items" are wrong , dont enable "automatic mode at MFG app at phone at modem settings , because settings will change ) .
-Install newest qpst ( ver 402) program with drivers for phone ( from lg site )
- enable QC Composite mode for port setting at MFG application at phone ( access - ##634# and 277634#*# )
-restart phone
-connect phone to pc , at qpst configuration make new manual connection for your com port ( what com ? find at task menager )
It is important to have older factory firmware (not wp7.8 ) at phone because newest have rather blocked some functionality , for example v10b , v10c these .DZ files will be ok ( you can downgrade firmware version of your phone with lgdp2 v33 program with .DZ file ) .
- next open "Download program" (qpst program section) and click for "backup " bookmark , make location for wiriting .qcn file with nv items.
Further is more easily
.
This program have some additional funcionality , for example qpst programming (you can change umts setting for example )
My good nv item file for you at attachemnts.