I have bought an Xperia X10 from Ebay and now get stuck on start screen shows me the start-up animation continous.What i can do my Pc sees my Xperia like Xperia X4 instead of X10 and doesn't find any driver.
Any help?
Thanks in advance!
Have you tried a reset?
u Sure its a original and not a chinese copy?
first off i find it interesting that you joined jan 2008 and THIS is your first post!
if you've been here since then you'd probably have noticed by now that most people include as much information as possible when posting if they want their question answered.
And.. not to mention you probably noticed each forum has subforums with different categories.. like the one for GENERAL? I don't see Android DEVELOPMENT having anything to do with your phone not starting.
let's start over.
A. what version of the phone did you buy? unlocked?
B. what carrier are you using it on?
C. is there a SIM or a microSD in the device when you are attempting to boot it up?
D. What version of windows are you trying to connect your device to?
we might have a better understanding of what's going on if you could answer these questions for us.
Killerskincanoe i use my acount only for tutorials,downloading applications and roms and till now i didn't have any problems with my phones.
I bought the phone from Ebay unlocked and i used with Vodafone but worked fine with Orange..etc.
My phone is Prototype Ap1 and my Pc sees it like Xperia X4 but the phone is 100% Xperia X10 because i used few weeks and everything worked right.
I tried to boot it up with/without sim or card and nothing changes.
I'm using Windows7 64.
Krabman i don't know the combinations of buttons to try an hard reset and i can't install the driver.
Sorry for my english.
Any help will be apreciated.
I would contact SE to get the button combo for the reset as its not in the manual which only shows the menu path. You did pull the battery and let it set for a few minutes before putting it back in right?
Hi. (Hai noroc.. )You can try the following. Go to the official sony ericsson website, and download UPDATE SERVICE. Start it, then follow these steps:
-Remove and re-insert the battery (make sure it's more than half)
-Press the back (<-) button while connecting the phone to your PC (keep pressing untill further notice)
-Usually after the phone has been correctly recognised, it will let you know.
Even if it's a prototype it should work and update the SW.
My only concern is.. How the hell did you manage to buy an acceptance unit online?!..
And more.. WHY did you get it? It's a known fact that prototypes are the most unstable..
Anyway.. if the update service doesn't work.. It's most probable that is a very early proto, or a chinese replica like reb0rn said.
any news on this problem i have a non proto that hangs on activating screen also
br
dj
I didn't resolved the problem.Still waiting!
Sent from my Nexus One using the XDA mobile application powered by Tapatalk
any news on this problem i have a non proto that hangs on activating screen also
br
dj
Click to expand...
Click to collapse
this is bad, you have a commercial unit and u got stuck, how did you come accross with this mate?
Sent from my X10i using the XDA mobile application powered by Tapatalk
Hello,
I've been trying all day to unbrick my xperia x8 phone with no success.
This is what succeded:
1) I changed the lcd
2) tried a hard reset with no success
3) tried to update with sony ericsson update software several times, trying different things each time.
4) tried all kinds of different solutions posted on these forums.
These are the problems I'm finding at the moment.
1) When I try to turn the phone on, it blinks between light black and nothing, slowly. No led turns on.
2) I can't mange the phone memory stick files when connected through usb
3) when i take off the battery and plug it usb or to the plug, i see the orange light, indicating that it's charging. But when I try to turn it on, the light never comes up again until I remove the batery again.
4) The only way I updated the phone via sony ericsson software, while holding the c button to detect the phone. But other software can't detect the phone, and the green light goes out very quickly. (unless using sony ericsson update software).
I can't find a solution for this. Would greatly appreciate some help. Thankyou.
gremory said:
Hello,
I've been trying all day to unbrick my xperia x8 phone with no success.
This is what succeded:
1) I changed the lcd
2) tried a hard reset with no success
3) tried to update with sony ericsson update software several times, trying different things each time.
4) tried all kinds of different solutions posted on these forums.
These are the problems I'm finding at the moment.
1) When I try to turn the phone on, it blinks between light black and nothing, slowly. No led turns on.
2) I can't mange the phone memory stick files when connected through usb
3) when i take off the battery and plug it usb or to the plug, i see the orange light, indicating that it's charging. But when I try to turn it on, the light never comes up again until I remove the batery again.
4) The only way I updated the phone via sony ericsson software, while holding the c button to detect the phone. But other software can't detect the phone, and the green light goes out very quickly. (unless using sony ericsson update software).
I can't find a solution for this. Would greatly appreciate some help. Thankyou.
Click to expand...
Click to collapse
If you had searched this forum, you would have found this. Good luck.
Thank you for your reply.
I had tried that before, and tried it again. I still have the same problem.
The Update Service Version i used was the one recommended at Sony Ericsson Support Center website. 2.11.1.9
Any other suggestion?
Thanks in advance
gremory said:
Thank you for your reply.
I had tried that before, and tried it again. I still have the same problem.
The Update Service Version i used was the one recommended at Sony Ericsson Support Center website. 2.11.1.9
Any other suggestion?
Thanks in advance
Click to expand...
Click to collapse
If you used PC companion then I recommend trying the Sony Ericsson Update service. If you already tried that then, try the PC companion. If you tried both and they are not working, then use the flash tool.
Thankyou,
Yes I have tried both.
The flash tool is at sony ericsson's support center?
gremory said:
Thankyou,
Yes I have tried both.
The flash tool is at sony ericsson's support center?
Click to expand...
Click to collapse
Flash tool is on this forum,search a little bit.
Ok, I just flashed it using the software version 2.3.
And I'm still in the same scenario.
I do have some questions though.
Should I flash it with the micro sd in?
After flashing it using the software, should it be ready to run?
I flashed the phone using android 1.6.
Thank you.
You flashed versioon 2.3??? From which phone?
Maybe your new LCD is damaged and it can't show anything..
@[email protected]
I believe is a typing error lol
Sorry, it was indeed.
What I meant was, I flashed the phone using the Flashtool version 0.2.3.
Sorry for double posting but, regarding the new lcd.
I bought it on ebay, and, I think it's not damaged. I also think I did not damage the phone changing it, I used specific tools and was very careful.
If it was the screen, the led should at least blink red a couple of times while turning it on shouldn't it?
I haven't notified it, you should insert a withoutPIN-SIM and after a while try to call the phone, if it is on you should ring, otherwhise...
Tried that and nothing.
Anyway of finding out what the problem really is? :s
Because I see that I can flash the phone and update it's firmware with three different softwares.
Sony Ericsson Update Service
Sony Ericsson PC Companion
X10 Flash tool 0.2.3 by Bin4ry
I have another question, can I unplug the cellphone after the firmware flash?
It says so, but the led is still green.
Just trying to find the real problem here :s
Thanks for all the support though.
gremory said:
I have another question, can I unplug the cellphone after the firmware flash?
It says so, but the led is still green.
Just trying to find the real problem here :s
Thanks for all the support though.
Click to expand...
Click to collapse
i read all the post. according to your description it seems to be hardware related problem not software 100%. cauz as you said you can change the firmware. then that mean you really need some pro help. just contact with your lcd supplier and ask help from them. they can help you if you dont want to go to technician..!!!!!!!!!!!!!!!!!!!
That's what I'm thinking, but I don't think it's the lcd.
The old one shows with a crack in it, the new one shows no crack. Both show a blank screen.
Might be something else, trying to find out what :s
Ok, seems that the problem is from the new lcd.
I found this because, when I place the old one, after a while, I see the red led blink a couple of times.
And with the new one, I don't see any of that.
So, it can only be that, in my opinion.
Thanks for everything anyway.
Best regards.
ok guys need to pick your brain been at this about a week and driving me mad!!!
i rooted my sony x10i i rooted the phone and is totally working as rooted but have now got a constant usb problem it is now saying USB DEVICE NOT RECONISED but this is coming up weather the usb is attached or not , but when i conect my phone it still charges the phone and can move files etc can anyone help me in this matter as can't use my pc with out going mad with the usb message coming up all the time making noise every 2 mins i am about demented....
have done everything right but can't understand plus because of this problem my other usb's are now effected.
If anyone can help please please let me k now thanks in advance for reading from a & person thats went round and round in circles trying to solve this as tried a lot but always needing more tech minded people now as pulling my hair out lol
This message comes up on your PC then? What makes you think it had anything to do with the phone?
Sent from my X10i using XDA App
Try re installing the usb drivers on your pc or update them ?
Sent from my X10i using XDA Premium App
I how to reverse the X10 from gingerbread custom kernel to the factory condition basically to 2.1 I stuck on Sony logo (Sony ericsson black and white) unforeseen reason i cant open xrecovery. furthermore seus does not recognise my x10i
marcoplo said:
I how to reverse the X10 from gingerbread custom kernel to the factory condition basically to 2.1 I stuck on Sony logo (Sony ericsson black and white) unforeseen reason i cant open xrecovery. furthermore seus does not recognise my x10i
Click to expand...
Click to collapse
flashtool?!?!
reinstall drivers?!?!
USB port on X10 is getting disabled
I'm hearing your pain. It sounds odd and many people have not encountered this problem, so it is hard to even explain, harder to understand it, unless it's happened to you I guess.
http://forum.xda-developers.com/showthread.php?t=1034997
New battery will help, if you can get another stock X10 and get some charge back into your battery, this is the first problem overcome.
Next you need to get the USB port to work, there is nothing wrong with your computer. It seem's the USB port gets disabled onboard in the X10 firmware somehow and I'm looking into how. Will let you know when I know more but it seems this is going like wildfire with many X10 owners at the moment - myself included - I can not get my phone to detect SEUS and just bought a new battery, which got drained inside of 10 minutes.
FYI - Wolfbreak CM 6.5 v5 was the firmware I was running at the time the problem came to occur for me. This is based on the FreeX10 Beta4, modified by TriPNraVeR and then again modified by Wolfbreak. I'm not sure how far back this problem goes but it is appearing to be across the board on any Froyo variants.
@rendeiro2005, if this is the case, are any of your ROM's also based on the same firmware? If so, you have just seen the issue, it's happening to people in masses at the moment and is not just a simple SEUS or FlashTool fix... the USB port has become disabled on the X10.
I've been into xRecovery and done a factory wipe, which clears all user data, but after that had a few minutes of green LED, then a white led, crashedm and not able to get back in at the moment. I'm working hard to find a solution
dear all
my X10 is totally black out, no red light, no any light, screen do not turn on.
battery is fully charged as it works perfect in my bro's x10
i know SEUS may help to recover the phone, but the problem is SE website said SEUS is no longer avaliable for X10, they only give me the download link for PC companion 2.0
and i have this already.
anyone know where can i find the SEUS to download?
or PC companion also can do the same thing?? many thanks!
http://www.sonyericsson.com/cws/sup...ads/subject/pccompanion/xperiax10?cc=gb&lc=en