Helo,
I've got a big proplem, my GT540 doesn't boot anymore it always freezes when the LG sign appears. I have this proplem since I'd tried to change the statusbar font into whiteby changing the services.jar. Hardreset and KDZ Updater aren't working. And I also tried to change the new services.jar to the old with adb but I don't get root permissions.
My phone runs with 2.1 Eclair.
Thanks for your help,
Lucas
Wait, arent the status bar white by defoult ?
No i don't mean the bar I mean the clock, but do you have any ideas to solve my proplem?
Do The Hard Reset With Press The
Vol Up + Search Key (on the right side of the phome) + home button
When I Trie to do the hardreset it Happens nothing! Is there no other possibillity to reset?
You could try fresh install with KDZ updater, that worked for me when I broked the radio and my network didn't worked. If you have troubles geting in to download mode you could try removing the battery and press volume up + camera + power button Just be carefull! Good luck
Sent from my GT540 using XDA App
I tried this too, but it crashed always after I choose the kdz file
Here is the log file of KDZ Updater, rename it to Fail.log
Luc-As said:
I tried this too, but it crashed always after I choose the kdz file
Here is the log file of KDZ Updater, rename it to Fail.log
Click to expand...
Click to collapse
OK, you could try this :
If you have problems with KDZ_FW_UPD - Download and install from Microsoft two files "MSXML 4.0 SP3 Parser" and "VisualC Redist"
1 LG_Android_Driver Ver 1.0 must be installed
2 In the Device Manager disable LGE Android USB Modem
3 Run Windows Enabler (on Windows 7 as administrator) and left click on the icon in System tray ( it should be ON )
4 Run "KDZ_FW_UPD.exe" (on Windows 7 as administrator)
5 In the "Type" select "3GQCT", then choose the firmware file
6 Expand the window of the KZD flasher ( more options will emerge )
7 In the "PhoneMode" section choose "CS_EMERGENCY"
DIAG - standard flashing mode of ON state
EMERGENCY - in extreme cases!
CS_EMERGENCY - the same thing, CS - crash systems
8 Click "Start update" will process the firmware
You could also disable your anti virus and use only the back USB ports of your PC. Good luck !
Oh THANKS! I love you guy, I thought I killed my brand new mobile!
Luc-As said:
Oh THANKS! I love you guy, I thought I killed my brand new mobile!
Click to expand...
Click to collapse
You are welcomed
hi all!
my phone was root, instant a2sd, then it work very slow, i was factory reset, it worked.
but when i reset it again, and it can not log on. stop at "android" screen log on. In " download mode" ,i update rom again (v20B_00 and CIS V20B_00), some time, done, but not change, it can not log on. stand by at "android" screen.
any body help me? what can i do? any way to factory reset by window? script? els..
ps: it not hard reset, "Volume up + HOME + SEARCH" buttons not work, maybe my phone GT made by LG vietnamese.
IMEI :352***-04-31***3-1
tks for read!
GT540 does not boot
I have followed
I tried this too, but it crashed always after I choose the kdz file
Here is the log file of KDZ Updater, rename it to Fail.log
OK, you could try this :
If you have problems with KDZ_FW_UPD - Download and install from Microsoft two files "MSXML 4.0 SP3 Parser" and "VisualC Redist"
1 LG_Android_Driver Ver 1.0 must be installed
2 In the Device Manager disable LGE Android USB Modem
3 Run Windows Enabler (on Windows 7 as administrator) and left click on the icon in System tray ( it should be ON )
4 Run "KDZ_FW_UPD.exe" (on Windows 7 as administrator)
5 In the "Type" select "3GQCT", then choose the firmware file
6 Expand the window of the KZD flasher ( more options will emerge )
7 In the "PhoneMode" section choose "CS_EMERGENCY"
DIAG - standard flashing mode of ON state
EMERGENCY - in extreme cases!
CS_EMERGENCY - the same thing, CS - crash systems
8 Click "Start update" will process the firmware
BUT I get error:
Upgrade error
Wparam:100
lparam: 4008
try booting and then when it is stuck at the lg logo plug it in to your pc and begin the upgrade in diag mode.
It worked for me when i wiped my phone.
Cant get it to start reloading the firmware
Can you please tell me from where to get the file KDZ_FW_UPD.exe in english I have it in Russian.
I have tried in DIAG mode but failed...
Please help..
The upgrade does not start...
Very GOOD now it did it like this.
Start your phone in recovery. Volume down+camera+power, see if the pc sees the device. Start the update tool max it and select emergency and flash again.
This fixed...
Now I need to add spanish to it. Do you know how??
cmora22 said:
Can you please tell me from where to get the file KDZ_FW_UPD.exe in english I have it in Russian.
I have tried in DIAG mode but failed...
Please help..
Click to expand...
Click to collapse
Download this file http://forum.xda-developers.com/showthread.php?t=812308
and in folder u see the "updater" file. doubleclick and u have the english KDZ version.
Oh. I need this Fail.rar too.
I have the same Problem. Can anybody reupload?
THX
The Updater allways tells me, that the Phone is not found. What should I do?
I have all the drivers installed.
tehbone
tehbone said:
The Updater allways tells me, that the Phone is not found. What should I do?
I have all the drivers installed.
tehbone
Click to expand...
Click to collapse
yeah, i've got the same problem, i don't know what i can do...
Pleaz help us =(
My PC don't see my phone, my phone stay on 'lg' boot, and can't boot on emergency or hard reset... =/
EDIT: i did it!
You only need to desactivate the LG Android USB Modem (i didn't saw 'Modem' on Device Manager, so i could not desactivate it).
If like me you don't see Modem, you will see it during the period of time during which the device is recognized mod download, ie for about 5 seconds after you plugged in...
I hope it will help someone
PS: Sorry for my english..
Look under modem and you see your phone
At property under tab look your com number remember it
Take teraterm create a connection with your phone you can connect it normally
When you are connected write
AT
( if you see nothing go to setting general and activate ''echo typed only'' )
If your getting OK
AT%FRST%
and the phone does a factory reset
( i'm french so i'm sorry for my english )
Sent from my GT540 using XDA App
I, i've tried to update my friend's phone to latest unbranded build and for the lulz now i'm in troubles, well, i'll be the more accurate that i can be, so here we go:
Well, the phone enter in recovery mode as well it enter at download mode, so i'll proceed to install drivers and check odin, my lap is currently running w8.1 x64 so odin doesn't detected com port, well after a lot of googling i'll finally go to a friend lap with windows xp and drivers installed succesfully, and ODIN detect the phone at a COM port in download mode.
Well i just put the partitions file (instead i tell odin to not repartition) and put the .tar file of my unbranded s5360L, well the first times i get "setup connection" and it ends forever on it, if i close odin from task manager and reopen, com port is not detected anymore, i need to reboot and reinstall drivers to get it work and if i got tooo much luck after a few try's it start download but fail at 2 secs of the first module install.
In every PC i check'd (odin 1.84) with samsung v3000 drivers and .tar.md5 file it happens on that way, i'm very frustated cause my friend ask me for the phone and its bootlooped and i don't know how can i proceed u.u
Can anyone give me some light to fight this uncertain problem? i tried to isolate the problem as well but with no results for my perception.
Thanks, sorry for TL, but please read y.y
for TL;DR: Odin 1.83 with samsung drivers no kies stuck @ setupconnection or install a little bit and just fail everytime i try.
To start off with odin & flashing firmware works fine in Windows 8.1 - Just run the driver setup programme in compatibility mode by right click the setup file - select properties than compatibility tab & from the drop down box select windows xp sp3 - select apply and now the setup programme will run - keep clicking next & job done
Now for the firmware - never use the pit or bootloader file - its just not needed to flash stock firmware & if you flash the wrong one you will brick your phone
Use odin 3.07
All firmware and instructions are on my firmware thread to which you find either at the top of the dev section or by clicking the link to my threads in my signature below
Note if you have downloaded firmware from elsewhere delete it & download it from my thread using my instructions
hello guys bit new here, i have tried rooting my device via ODIn coz vroot dint work and couldnt understand the reason since it was in CHINESE.
for now the device is stuck at "firmware problem need to upgrade it via kies mode" thogh i have tried doing the same through kies and kies 3 but wasnt succeful.
Please help as i am in urgent need of tablet.
the model no is SM T 231
Hi,
I will have your thread moved to your device section.
Good luck!
Moved to the correct forum.
Have you tried to flash a stock ROM from Odin in Download Mode? (not kies)
orangekid said:
Moved to the correct forum.
Have you tried to flash a stock ROM from Odin in Download Mode? (not kies)
Click to expand...
Click to collapse
nope i dont where to download the STOCK and even the procedure
I would DL stock KitKat with this link:
http://www.sammobile.com/firmwares/3/?download=33706
You might have to register to DL but sammobile is the only place I can find a decent DL for it.
Once it downloads unzip the file.
Download Odin 3.09 (you can find a free download everywhere).
Make sure your device is off, then hold vol dn and them power till it says to hit the button for download mode.
Once in download mode plug into your computer and if windows 7 or 8 let the drivers install fully.
If it does not find drivers then look for them manually.
Once you've got the drivers open Odin. It should be a green light on comm 1 or something like that showing a device is plugged into it.
Make sure ONLY F Reset Time and Auto Reboot are checked and nothing else.
Hit the AP button and find the tar file or md5 file you unzipped earlier.
Once it loads up hit start and hope for the best while it flashes.
Warning; read more about this before you try it. Once KitKat flashes do not try to downgrade, but read all about it.
I linked you to firmware for device SM-T231 so that had better be your device. Triple and quadruple check to make sure the file is the right one for your device...
Hope this helps.
Sent from my 1+bacon.
I can't get fastboot to install correctly...I put it int bootloader mode and it always says drivers failed to install, Im running windows 7 . can anyone help
EDIT: I GOT IT PLS CLOSE
danthepan124 said:
I can't get fastboot to install correctly...I put it int bootloader mode and it always says drivers failed to install, Im running windows 7 . can anyone help
EDIT: I GOT IT PLS CLOSE
Click to expand...
Click to collapse
This is a guide to install drivers: http://forum.xda-developers.com/nexus-4/general/drivers-nexus-4-driver-windows-t1992345
EDIT: Ops didn't see your edit...
I was trying to flash CM11 ROM in my Samsung Galaxy Ace GT-S5830, for that I have also installed CWM 6.0.5.3. While flashing ROM from recovery it failed with some error message, I tried it once again and again it stopped with the same error message. I decided to try some other ROM and kept mobile on side to search new rom, the mobile was still in recovery mode connected with usb for charging, after a minute as I saw at my mobile it was not in recovery mode, the screen was OFF. I tried to restart it again & again but failed, I even tried to start it in recovery mode but failed. Tried overnight charging, thinking that its battery is down, but failed to restart it. Then I searched about it on google, and came to know it was bricked with solution to flash it with stock rom using Odin, if it is still getting detected in PC. My PC is still detecting my mobile, tried flashing stock rom using Odin, but it is getting stuck at "< 1 >setup connection...". I don't know what to do now. My mobile is not in warranty, so no way in getting it repaired from service center. If anyone know any solution for this, then please tell me. I am eagerly waiting for your reply. Moderators, please don't delete this thread saying to go and search for same kind of threads, I have already done that & at last posted in new thread. Please Help me as soon as possible. Thanks..
http://download1187.mediafire.com/eew353b6p3sg/y2yja47mu5ew4g5/samsung+Galaxy-Ace+gt-s5830.rar
Extract it, open "S5830_Odin+Multi+Downloader+v4.38.exe" then in the OPS section select the .ops file in the extracted folder, then give a check on "One package" check box. Then on the bottom press the "One package" button and select the firmware in the folder and you're done !
P.S. If that doesn't work, try reinstalling Samsung USB Drivers, removing Kies, switching cables, ports or even PC's (if possible)