I was trying to flash CM11 ROM in my Samsung Galaxy Ace GT-S5830, for that I have also installed CWM 6.0.5.3. While flashing ROM from recovery it failed with some error message, I tried it once again and again it stopped with the same error message. I decided to try some other ROM and kept mobile on side to search new rom, the mobile was still in recovery mode connected with usb for charging, after a minute as I saw at my mobile it was not in recovery mode, the screen was OFF. I tried to restart it again & again but failed, I even tried to start it in recovery mode but failed. Tried overnight charging, thinking that its battery is down, but failed to restart it. Then I searched about it on google, and came to know it was bricked with solution to flash it with stock rom using Odin, if it is still getting detected in PC. My PC is still detecting my mobile, tried flashing stock rom using Odin, but it is getting stuck at "< 1 >setup connection...". I don't know what to do now. My mobile is not in warranty, so no way in getting it repaired from service center. If anyone know any solution for this, then please tell me. I am eagerly waiting for your reply. Moderators, please don't delete this thread saying to go and search for same kind of threads, I have already done that & at last posted in new thread. Please Help me as soon as possible. Thanks..
http://download1187.mediafire.com/eew353b6p3sg/y2yja47mu5ew4g5/samsung+Galaxy-Ace+gt-s5830.rar
Extract it, open "S5830_Odin+Multi+Downloader+v4.38.exe" then in the OPS section select the .ops file in the extracted folder, then give a check on "One package" check box. Then on the bottom press the "One package" button and select the firmware in the folder and you're done !
P.S. If that doesn't work, try reinstalling Samsung USB Drivers, removing Kies, switching cables, ports or even PC's (if possible)
Related
Hello guys i was trying out the new Kangabean 4.3. ROM for my AT&T and after flashing it in TWRP it appears I has softbricked my device. I can only boot into download (odin) mode and it stays on "downloading now".. Anyhow i cannot boot into recovery it just vibrates to confirm my input and just revibrates and revibrates... Looked all over for guides and tried to return it to factory settings on Kies but it does not detect my phone... Any help would be great i need this phone for work everyday!!!
Karbooo said:
Hello guys i was trying out the new Kangabean 4.3. ROM for my AT&T and after flashing it in TWRP it appears I has softbricked my device. I can only boot into download (odin) mode and it stays on "downloading now".. Anyhow i cannot boot into recovery it just vibrates to confirm my input and just revibrates and revibrates... Looked all over for guides and tried to return it to factory settings on Kies but it does not detect my phone... Any help would be great i need this phone for work everyday!!!
Click to expand...
Click to collapse
Please search for similar threads. This same issue is being posted over and over and over again. When you were making this post, what "similar threads" or "similar topics" showed up? Did you check them for a solution?
yes sorry i looked at all of them and they all involved well just flashing the stock rom but i cant get my computer to see my gs4 on download mode...i got the drivers and odin installed.
Well, this thread has a couple of ideas...
http://forum.xda-developers.com/showthread.php?t=2405991
or maybe here...
http://forum.xda-developers.com/showthread.php?t=2405127
You might also want to look at the TWRP thread in the development section.
Try again to get into recovery, the key sequence can be tricky, make sure you are doing it just right. "Doing it just right" has been discussed many times.
Also, look at this thread, maybe it will help...
http://forum.xda-developers.com/showthread.php?t=2398336
Yea, I realize that thread is about MF3, but it still has ideas that might help you.
There are also a ton of threads about how to get your PC to recognize ODIN.....search.......good luck.
yeah ive been at it for hours man those links can all access the recovery i cant... i tried everything got the drivers up tried all the odins and its just stuck on "downloading do not turn off target" and my pc doesnt see it...
Odin finally recognized it on the pc in download mode and i was able to flash the stock rom but it seems it wasnts successful...it still just vibrates and vibrates when i press the power...
Try flashing the open recovery.
Sent from a jedi extacy note II
If you mean the CWM recovery I tried it on Odin and it failed.... :""(
Sent from my Nexus 7 using xda premium
Take battery out, back in, power+volumedown, download mode, Install Samsung Kies, do Kies update, connect to PC, Tools-> firmware initialization, take battery out and type model/serial Number, wait patiently until it finishes.
Try different USB port or different PC. Use stock USB cable comes with original box.
If Kies screen get stuck at model number section, you did flash MF3 triangle thingy -> unsolveable brick. Have to go thorugh warranty replacement.
Sent from my SGH-I337 using Tapatalk 4
the Kies Emergency firmware utility worked it put my phone like the day i bought it...also rooted it successfully and installed TWRP on it thanks guys
Hello everyone,
I registered and post this thread because i give up with problem i get after upgrade my galaxy s4 i9505 to jelly bean 4.3. Pc dont recognizing phone, usb cable is good because when i connecting the charging icon appears. I checked in other pc (in both there is windows 7), I download the last version of usb drivers from official site, i download the last version of Kies3 and it still no connecting. Before upgrade i havent this issue, i also checked other usb cable (both cables are original). I searching for hour any solution, activate developer options and check "usb debugging", also i wrote *#0808# and check mtp (i also tried other options, no result) or I tried launch vol down + power + home, also dont help. So i give up and now i`m hope some hi-tech wizard will tell where i making mistake...
After hours spending on wasting time with this usb connect i started to think about change soft, but here appears another issue... I havent root, and superuser. That is not a finish of trouble! I noticed that i have recovery 3e with some kind of error "e: signature verification failure" when i trying to flash any other soft or custom recovery! I searching for some tips on web, but in all options i allways impended whatever i try: when i try use Rom Manager there is error i havent su, when i try activate SuperSu there is error i havent root, when i try install CWM by MobileOdin there is error i am not su... when i try other aps like Framaroot there is error #5, also in Rom Manager i have info that my Rom doesnt support OTA, when i try change recovery file in System/bin folder by RootExplorer there is again error "u havent root"! I'll go crazy by this trap!
Anyone have any ideas? Please help me :crying:
PS. English is not my strong side. Sorry.
Dude-K said:
Hello everyone,
I registered and post this thread because i give up with problem i get after upgrade my galaxy s4 i9505 to jelly bean 4.3. Pc dont recognizing phone, usb cable is good because when i connecting the charging icon appears. I checked in other pc (in both there is windows 7), I download the last version of usb drivers from official site, i download the last version of Kies3 and it still no connecting. Before upgrade i havent this issue, i also checked other usb cable (both cables are original). I searching for hour any solution, activate developer options and check "usb debugging", also i wrote *#0808# and check mtp (i also tried other options, no result) or I tried launch vol down + power + home, also dont help. So i give up and now i`m hope some hi-tech wizard will tell where i making mistake...
After hours spending on wasting time with this usb connect i started to think about change soft, but here appears another issue... I havent root, and superuser. That is not a finish of trouble! I noticed that i have recovery 3e with some kind of error "e: signature verification failure" when i trying to flash any other soft or custom recovery! I searching for some tips on web, but in all options i allways impended whatever i try: when i try use Rom Manager there is error i havent su, when i try activate SuperSu there is error i havent root, when i try install CWM by MobileOdin there is error i am not su... when i try other aps like Framaroot there is error #5, also in Rom Manager i have info that my Rom doesnt support OTA, when i try change recovery file in System/bin folder by RootExplorer there is again error "u havent root"! I'll go crazy by this trap!
Anyone have any ideas? Please help me :crying:
PS. English is not my strong side. Sorry.
Click to expand...
Click to collapse
Well, you're in the wrong device forum.
Sent from my Nexus 7 using Tapatalk
Dude-K said:
Hello everyone,
I registered and post this thread because i give up with problem i get after upgrade my galaxy s4 i9505 to jelly bean 4.3. Pc dont recognizing phone, usb cable is good because when i connecting the charging icon appears. I checked in other pc (in both there is windows 7), I download the last version of usb drivers from official site, i download the last version of Kies3 and it still no connecting. Before upgrade i havent this issue, i also checked other usb cable (both cables are original). I searching for hour any solution, activate developer options and check "usb debugging", also i wrote *#0808# and check mtp (i also tried other options, no result) or I tried launch vol down + power + home, also dont help. So i give up and now i`m hope some hi-tech wizard will tell where i making mistake...
After hours spending on wasting time with this usb connect i started to think about change soft, but here appears another issue... I havent root, and superuser. That is not a finish of trouble! I noticed that i have recovery 3e with some kind of error "e: signature verification failure" when i trying to flash any other soft or custom recovery! I searching for some tips on web, but in all options i allways impended whatever i try: when i try use Rom Manager there is error i havent su, when i try activate SuperSu there is error i havent root, when i try install CWM by MobileOdin there is error i am not su... when i try other aps like Framaroot there is error #5, also in Rom Manager i have info that my Rom doesnt support OTA, when i try change recovery file in System/bin folder by RootExplorer there is again error "u havent root"! I'll go crazy by this trap!
Anyone have any ideas? Please help me :crying:
PS. English is not my strong side. Sorry.
Click to expand...
Click to collapse
wrong forum mate,
go here
http://forum.xda-developers.com/galaxy-s4
Please note that I have done search and tried various solutions before starting this thread :
Hi My A6000 phone got factory reset and then I tried to recover some lost pics...but I was advised that my phone needs to be rooted first, so the software opened kingo root soft, It showed me the message that phone has been rooted and when it rebooted there was a notification of software update which I said ok and ever since then the phone is stuck on system recovery mode (not sure if it is called soft brick or not) and I have tried many things including choosing all the options starting from reboot system now, apply update from ADB, wipe data/factory reset, wipe cache partition, apply update from sdcard but nothing seems to work!!! oh I for got to mention on the top of the screen it says Androoid system recovery <3e>Kraft -A6000_S035_150507 and then gives all the option and i have tried this following :
https://boycracked.wordpress.com/2015/06/03/unbrick-lenovo-a6000/
but some how for the first solution it keeps on saying download failed, emergency recovery download failed...anyways it does not work
I have also tried this
http://forum.xda-developers.com/chef-central/android/unbrick-lenovo-a6000-plus-lenovo-a6000-t3137247
but it has ADB killed (tried looking and installing adbfixer solution--it says it cannot finf adb.exe even though it is there)
Is there any soultion to this!!! Please help if there is one!
the link from boycracked (mentioned above )actually worked the trick was to hold vol up+down key (while the phone is off) and then insert the usb into your computer, secondly my computer kept of saying that qualcomms --digital signatures not verified and the port is supposed to be Qualcomm Lenovo HS-USB QDLoader 9008 where as mine showed up to 9091, to solve this I uninstalled the drivers and then disabled digital signatures (use goggle how to disable signatures verification on whichever windows you are using) and it worked fine. Thank you all
install cwm
Install cwm from pc and then try
Use HW flash tool
Even my Lenovo a6000 plus was bricked. But mine is more complicated than your's.
I've installed CWM recovery before. But unable to access it, atleast native Android recovery either.
"Rev-app" folder from "System" folder were deleted unfortunately. I couldn't even wipe, hard reset or anything.
After a long struggle, i've found a way out. I've came across a Qualcomm flash tool "HW OneKeyDownload Tool".
And finally, i won on it!
Download it from here: docs.google(.)com/uc?id=0B3qYFBKKL2hieDM1RUNMQWRsSHc
You need to have:
1. Mobile drivers installed
2. Universal ADB drivers (That ZIP will have it)
3. Stock ROM or any custom ROM
See this post on AndroidXDA for more info:
androidxda(.)com/download-hw-onekeydownload-tool
install cwwm
installing cwm from pc is the best way to unbrick
Dont feel bro.just follow the steps which u tried before to install cwm.but before that if ur pc cant find ur mobile.then use this command.
"Adb shell"
And it shows searching for device.
Then put ur battery out and insert it again.ur device will be detect by pc.
Sent from my Lenovo A6000 using XDA Free mobile app
am also getting this same issue. Please help me.
sp_grewal said:
Please note that I have done search and tried various solutions before starting this thread :
Hi My A6000 phone got factory reset and then I tried to recover some lost pics...but I was advised that my phone needs to be rooted first, so the software opened kingo root soft, It showed me the message that phone has been rooted and when it rebooted there was a notification of software update which I said ok and ever since then the phone is stuck on system recovery mode (not sure if it is called soft brick or not) and I have tried many things including choosing all the options starting from reboot system now, apply update from ADB, wipe data/factory reset, wipe cache partition, apply update from sdcard but nothing seems to work!!! oh I for got to mention on the top of the screen it says Androoid system recovery <3e>Kraft -A6000_S035_150507 and then gives all the option and i have tried this following :
https://boycracked.wordpress.com/2015/06/03/unbrick-lenovo-a6000/
but some how for the first solution it keeps on saying download failed, emergency recovery download failed...anyways it does not work
I have also tried this
http://forum.xda-developers.com/chef-central/android/unbrick-lenovo-a6000-plus-lenovo-a6000-t3137247
but it has ADB killed (tried looking and installing adbfixer solution--it says it cannot finf adb.exe even though it is there)
Is there any soultion to this!!! Please help if there is one!
Click to expand...
Click to collapse
Recently I was tried to update mobile firmware (latest Kraft-A6000-S_S014_150730) by OTA update (via system settings->about phone->system update), that time my mobile was soft bricked like above you said. I downloaded firmware and installed then some time after got some options menu. And I attached that problem as picture.
Before that I rooted my mobile using KINGROOT apk v4.0 , there after I did unroot again using in the same app.
I thought unrooted mobile does not affect by system update (any firmware or OTA update by LENOVO). But unfortunately my mobile got problem.
I didn't took any backup before that. I don't know anything about CWM backup and all. I know only the root and unroot using KINGROOT app.
I need to recover my mobile back or tell me how to install LENOVO A6000 PLUS stock ROM or any other way is there tell me to solve the problem. Please guide me step by step process or any video link there it was little better to understand for me.
Please help me, it will be appreciated. Thanks.
Attach the device to PC through USB cable and Install the CWM through ADB .
Install the Stock Kernel through Update Zip option within the CWM.
That will freshly installs the Android OS.
So apparently, I went home and usually put my phone into my desk.
While I took it from my pocket, I noticed the hardware buttons were lit but no display, I removed the battery to restart, during the week, frozen screen were occurring a dozen times when playing Clash, that though I didn't mind I just said to myself I will reflash the rom in the weekend.
But up to now,
It won't turn on, recovery mode or anything also doesn't work
It wont charge
Tried a new battery but still no luck
I think PC reads it but SPFT wont
Any suggestion on how I can revive my phone?
Attached is the error I get from SPFT
I don't own the A120 anymore. That is almost similar to this, as you might know.
Anyway, as nobody has answered your question, I will try to help as much as I can.
Does it give you a haptic feedback(vibration) when you try to power on the device?
Are you saying that it won't turn on completely?
If it is being detected on the computer and not on SPFT, you might want to check with the drivers you have. Do you have the MTK VCOM drivers installed? (I'm not really sure about the name, but it was something like that).
And try flashing the Stock ROM with SPFT with your battery removed from the phone.
Download the drivers.
Connect your phone without the battery and keep your device manager open, if it shows a device with a yellow exclamation mark beside it, right click and click on properties. You will have to do this quickly.
Once that is done, go to driver tab on the properties window. Select Update Driver. Browse my computer and enter the location of your downloaded and unzipped drivers.
(You might get a digital signature error or something similar. I'll tell you how to bypass that in the end. If you get that, go to the end, follow those steps and then come back and do all the steps after the downloading part.)
If the drivers are successfully installed, then unplug your device, run the SPFT and load the Scatter file of the Stock ROM.
Now select Download only and start the download, it will wait for you to connect the phone.
Plug in your phone without the battery. This should initialize the download process.
Now wait for the flash to be completed and if it is successful, take out your phone and boot it. If it boots up, congratulations.
If it does not, flash the same ROM the same way another time and check, if it is still not working, try with Firmware upgrade mode, twice. It should work in those tries.
Digital Signature Error bypassing.
I know only one method which works on Windows 8 and above(Tested).
Hold the Shift key while pressing Reboot.(Yes, you have to reboot your PC)
Once there is a blue screen with options, you should see "Troubleshoot". Select that.
Then Advanced Options and then Start Up settings. Then press Restart.
This will show you a menu with a lot of options. Select the option number which says "Disable Driver Signature Enforcement".
This will log you into the PC normally, but now, you can go back and do all the steps again and you won't get an error.
Cheers!
If this still doesn't help you, let me know on what happens so I can try to get you back your phone. Hope this helps.
WalterWh1te said:
I don't own the A120 anymore. That is almost similar to this, as you might know.
Anyway, as nobody has answered your question, I will try to help as much as I can.
Does it give you a haptic feedback(vibration) when you try to power on the device?
Are you saying that it won't turn on completely?
If it is being detected on the computer and not on SPFT, you might want to check with the drivers you have. Do you have the MTK VCOM drivers installed? (I'm not really sure about the name, but it was something like that).
And try flashing the Stock ROM with SPFT with your battery removed from the phone.
Download the drivers.
Connect your phone without the battery and keep your device manager open, if it shows a device with a yellow exclamation mark beside it, right click and click on properties. You will have to do this quickly.
Once that is done, go to driver tab on the properties window. Select Update Driver. Browse my computer and enter the location of your downloaded and unzipped drivers.
(You might get a digital signature error or something similar. I'll tell you how to bypass that in the end. If you get that, go to the end, follow those steps and then come back and do all the steps after the downloading part.)
If the drivers are successfully installed, then unplug your device, run the SPFT and load the Scatter file of the Stock ROM.
Now select Download only and start the download, it will wait for you to connect the phone.
Plug in your phone without the battery. This should initialize the download process.
Now wait for the flash to be completed and if it is successful, take out your phone and boot it. If it boots up, congratulations.
If it does not, flash the same ROM the same way another time and check, if it is still not working, try with Firmware upgrade mode, twice. It should work in those tries.
Digital Signature Error bypassing.
I know only one method which works on Windows 8 and above(Tested).
Hold the Shift key while pressing Reboot.(Yes, you have to reboot your PC)
Once there is a blue screen with options, you should see "Troubleshoot". Select that.
Then Advanced Options and then Start Up settings. Then press Restart.
This will show you a menu with a lot of options. Select the option number which says "Disable Driver Signature Enforcement".
This will log you into the PC normally, but now, you can go back and do all the steps again and you won't get an error.
Cheers!
If this still doesn't help you, let me know on what happens so I can try to get you back your phone. Hope this helps.
Click to expand...
Click to collapse
Thanks bro, but I already gave up and bought a new one because I badly need an android device for my mini accounts in CoC. Haha but I am till trying to revive my Rio during my free time, this has been my phone for 1 1/2 year..
Yes I am aware that Rio is rebranded A120, I also asked from CM12.1 and AOSP LP Wiko Rainbow threads and some suggested help. Tried all that but still same errors.
No, there's no response of any kind including vibration when turning on. Hmn, as per the drivers, I've been using Tinno Driver since the jelly bean era of this phone, no problems or whatsoever from jb to kk to lp using that driver, so I thought there would be no problems. Still no luck in getting success. Using different versions of SPFT, using sp flashable Rio jb, kk, MMX A120 jb, kk, Wiko kk,lp stock roms, still no luck. Tried every port and cord. And I am using the Win7 64bit, I also resorted to MTK drivers, both the preloader and Da. Still.. No luck. Haha. I also tried, download only, format all+download, and firmware upgrade option with every possible combination from above but no success..
Thanks for your answer btw!
I have tryed to root my phone but it failed when I tryed to follow a tutorial on youtube. When I saw it failed I tryed to get back to the normal state to my home screen but then it stopped me on a light blue screen with the following text "An error occured while updating the device software. Use the emergency recovery function in the smart switch PC software". So I installed the software on my pc and tryed conecting it. When I did it said it faile to connect to device. But when I try using the Emergency Recovery function it doesnt pick up the phone and does not list the phone there for me to recover it. Ive tryed uninstalling and reinstalling. My pc does not have Odin installed however my laptop does. Ive tryed reinstalling the drivers. I dont know where to go anymore. Please help. Thank you
enter download mode and flash ROM/firmware with Odin3