Related
Hi, I seem to be having some trouble trying to update to the latest 6.5 ROM. It says I have a "Error 260: USB Connection".
I also get the same error trying to flash to HardSPL, it says I should make sure it is synced, when it is. I also tried installing the "enablerapinew.cab", and another computer/another cable cord. All the same problems.
I think it may be because in my USB to PC menu, the option to "Enable Advanced Network Functionality" is ticked and grayed out. So I can't untick it.
I tried changing the driver in the registry to the USB Serial driver, but that didn't even sync.
If anyone can help, it would be greatly appreciated.
noctourne said:
Hi, I seem to be having some trouble trying to update to the latest 6.5 ROM. It says I have a "Error 260: USB Connection".
I also get the same error trying to flash to HardSPL, it says I should make sure it is synced, when it is. I also tried installing the "enablerapinew.cab", and another computer/another cable cord. All the same problems.
I think it may be because in my USB to PC menu, the option to "Enable Advanced Network Functionality" is ticked and grayed out. So I can't untick it.
I tried changing the driver in the registry to the USB Serial driver, but that didn't even sync.
If anyone can help, it would be greatly appreciated.
Click to expand...
Click to collapse
Since this is your first post;
Check here.
Tonnes of info on this error.
The alternative is to flash from SD card. Instructions in flashing guide on Wiki.
I'm having the same issue... mine started after i installed a cab file that allows all of myTouchflo screens to have the same wallpaper.... but now my usb connection on th phone does not work. Even in bootloader when i plug in the USB it never recognizes it and i've tried multiple cables and multiple workstations any help here would be great!
Robbienismo said:
I'm having the same issue... mine started after i installed a cab file that allows all of myTouchflo screens to have the same wallpaper.... but now my usb connection on th phone does not work. Even in bootloader when i plug in the USB it never recognizes it and i've tried multiple cables and multiple workstations any help here would be great!
Click to expand...
Click to collapse
Hard reset if nothing else works.
Then you will know whether it is a hardware failure or software related.
I've seen anything from bent pins, lose USB on circuit board, bad cables, Vista vs XP....etc and the list goes on of possible causes for this issue.
Well it still charges and the phone still reads the storage card because i was able to flash it from the card but the computer will not recognize it as a USB device therefore activesync will not work and i cannot access the storage card when its in the phone
Reinstall ActiveSync...maybe...
Regards
Hi!
I have exactly the same problem.
Connecting the TD2 with my PC does not do anything.
Its the same issue with my 2nd PC and othe cables.
Charging works but no USB connection.
I think the USB connector on the Phone is broken.
I allready contacted HTC support but no response yet.
I will post again when ive got some news.
br
wonko
SD-Rom flashing
Hi ya all,
Try to flash it from your SD card, have a look here: http://www.tomlenferink.nl/component/content/article/1-latest-news/77-windows-mobile-65.html
Don't forget for Windows XP you need Active Sync and for Windows Vista and 7 you need Windows Mobile Device Center.
Whenever i plug in my i9000, it just pop up an error msg ÜSB Device not recognized. I'm trying to get Kies to recognize my i9000
I tried following this but it doesnt work at all.
it worked for me on kies, but i didn;t like it anyways
What i did was go to settings --> about phone --> usb settings
and try the other options (i'm using media player option, not sure why mass storage doesn't work)
Did you try to change the usb ports on your pc (stick the cable into different usb ports)?
Sent from my HTC Desire using Tapatalk
OrbNRG said:
it worked for me on kies, but i didn;t like it anyways
What i did was go to settings --> about phone --> usb settings
and try the other options (i'm using media player option, not sure why mass storage doesn't work)
Click to expand...
Click to collapse
yeah only the media player option was available to me as well.
Mikulec said:
Did you try to change the usb ports on your pc (stick the cable into different usb ports)?
Sent from my HTC Desire using Tapatalk
Click to expand...
Click to collapse
changing the usb port does help, however when i unplug it and restart my com, it does not recognize it anymore
What OS are u running?
Could also have something to do with the number of irq's on your motherboard.
PC's older then aprox. 3/4 years have less irq's and can have trouble with much external devices
keevy17 said:
Whenever i plug in my i9000, it just pop up an error msg ÜSB Device not recognized. I'm trying to get Kies to recognize my i9000
I tried following this but it doesnt work at all.
Click to expand...
Click to collapse
Have a look at this site from HardwareZone.com.
It's heavily populated but you only need to read the last five or so pages.
Beards said:
Have a look at this site from HardwareZone.com.
It's heavily populated but you only need to read the last five or so pages.
Click to expand...
Click to collapse
yeah i am looking at that thread too, however thanks for the link here, good for documentation as well, appreciated
keevy17, u have the phone already? If yes, you could help us resolve our questions in last pages of this thread:http://forum.xda-developers.com/showthread.php?t=694835&page=9
Q: Are there any notifications (on screen, backlight of buttons, ...) about missed calls, new mails, sms? Is there any notification when u charge the battery and the battery is fully charged?
Thanks in advance.
The default USB connection is to activate Samsung Kies. You'll have to go to settings->About Phone->USB Settings to change. If it doesn't work after changing, soft reset the phone and try again.
Caused me a bit of head scratching until I went through the options.
Now am having same problem, can'r see mass storage in my computer.
I think I read you need to enable USB Debugging then it will work. for both of you I believe.
With USB debug i can only use adb, nothing works. If i disable debug i can copy files via MTP protocol but mass storage doesn't work.
Edit.
Found the problem, it doesn't mount it self like Desire/N1 i had mount it my self. All working.
hassan said:
With USB debug i can only use adb, nothing works. If i disable debug i can copy files via MTP protocol but mass storage doesn't work.
Edit.
Found the problem, it doesn't mount it self like Desire/N1 i had mount it my self. All working.
Click to expand...
Click to collapse
hassan,
I've not yet had a chance to use the phone yet. Can you tell me how you mount the USB in order to use it with a PC?
Beards said:
hassan,
I've not yet had a chance to use the phone yet. Can you tell me how you mount the USB in order to use it with a PC?
Click to expand...
Click to collapse
It was bit tricky to start with as i thought my phone is broke. First go to setting > About > USB Settings > and select Ask on connection. Plug the cable in to the and from drop down notification bar and hit USB connected then you get the option to mount the mass storage.
hassan said:
It was bit tricky to start with as i thought my phone is broke. First go to setting > About > USB Settings > and select Ask on connection. Plug the cable in to the and from drop down notification bar and hit USB connected then you get the option to mount the mass storage.
Click to expand...
Click to collapse
Thanks hassan, I'll try it later.
If you want kies to work with the phone, dont kill MTP.. But kies is acting weird, soemtimes it doesnt see the phone, but after unplug and replug it works again.. I've given up on kies actually, over 100MB to download and worst than some beta software i've used.
also, i cannot get samsung apps to work on kies, it just error or timeout.. you guys hv any luck?
I haven't tried kies yet, i'll try when i get home from work.
Anybody know how to mount on a Mac? I tried changing the USB settings to Mount/Media, no luck. Any help would be appreciated.
Hi,
EDIT * I have found a solution in that I can connect via WI fi so that's pretty good but if anyone can help me with the USB issue, it would still be appreciated. It seems that the Wi Fi connection is more limited as I am unable to view things in explorer *
hoping to get some help using my USB to connect to my PC. I've installed Kies but when I try to connect to my PC it just keeps on trying to connect but never actually does it.
I have looked for guidance on this but keep coming across the instructions to go into 'about phone > USB settings' etc etc. However, I do not have a USB settings in about phone. In fact, there is nothing at all about USB in About Phone. I do have a 'USB Utilities' in Wireless and Networks but all that gives me the option to do is 'Connect Storage to PC'. I have a memory card in my phone.
When I do connect to the USB cable, with Kies open, when windows 'finds new hardware' it keeps saying a problem occurred during installation.
Please can anyone help me out? All I want to do is basically drag and drop some files from my PC to my phone. Thanks very much for your help.
Settings --> Applications -- Development --> USB debugging.
Thanks for that!
It got me a little further. I also unmounted then remounted the SD card. However, when I try to connect via kies I now get the message:
Reconnect the device in Samsung Kies (PC Studio) mode. Current connection mode not supported by Kies.
What am I doing wrong? Do I have to re click the USB settings on the phone before connecting to Kies now that it's installed the hardware on my PC?
Grimlocc said:
Thanks for that!
It got me a little further. I also unmounted then remounted the SD card. However, when I try to connect via kies I now get the message:
Reconnect the device in Samsung Kies (PC Studio) mode. Current connection mode not supported by Kies.
What am I doing wrong? Do I have to re click the USB settings on the phone before connecting to Kies now that it's installed the hardware on my PC?
Click to expand...
Click to collapse
Turn off USB-Debugging
Don't connect phone yet
Open Kies
Open the Tools menu -> Troubleshoot connection error
Go through the guide and let it reinstall the drivers.
Connect you phone, and let it connect
The default setting has the USB debugging tick greyed out. When I select it, it asks me if I want to allow debugging.
Do you mean that I shouldn't allow debugging and then connect (after reinstalling Kies) or should I allow it and connect? Sorry for my noobishness, Android is all completely new to me.
You should untick the USB-debugging - Then reinstall drivers NOT entire Kies
OK, it's unticked and I'm reinstalling the drivers via troubleshooting.
Do I need to unmount then remount the SD card before connecting my phone? Thanks for your help btw.
Shouldn't make a difference
Bah, I still have the same problem. It just says that there was a problem installing the hardware when I plugged in the phone.
After reinstalling the drivers, i shut down Kies then reopened it. I then plugged in the USB and then plugged the USB into my phone.
When I first installed Kies yesterday, Microsoft Active Sync kept on trying to activate and ask for a CD. It kept on holding up Kies. In the end I uninstalled Active Sync. Also, I still have Samsung PC Studio on my PC from when I had a Samsung a few years ago. It was one of those old slider phones, not a smart phone. Could that be part of the problem? I was hoping to keep it because it's proved to have the best media player I've ever had.
I just don't know what I'm doing wrong here.
Try without restarting Kies.
What part of the drivers aren't installed? (Check device manager)
In Device Manager, under Portable Devices there's something called Android MTP that has an exclamation mark next to it. It says it's not configured correctly and that 'No driver files are required or have been loaded for this device'. I'll reinstall the Kies drivers now.
Thanks for this help mljjlm
P.S. Now that I've unplugged the phone, the MTP thing isn't showing in the device manager list anymore.
Grimlocc said:
P.S. Now that I've unplugged the phone, the MTP thing isn't showing in the device manager list anymore.
Click to expand...
Click to collapse
Of course, it's a part of the phone, and it should not be plugged in because they would have to force a reboot when reinstalling drivers (which might sort your problem btw)
Reinstalled the Kies Drivers and then plugged in my phone but got the same problem. It says a problem occurred. Same device now has a problem in device manager. Maybe I should just uninstall everything and restart? Should I uninstall the old PC studio too?
Just try the reboot without uninstalling anything and then plug the phone in when your pc has booted
Argh! Still didn't work! I think there must be a problem with my PC, well, I'll try doing full uninstalls and reinstall it all. I have to go now as well so I'll have to try again tomorrow.
Thanks very much for your patience mljjlm. It has been greatly appreciated
Are you trying to just transfer files back and forth? If so... forget using Kies.
(I don't have a micro-USB cable with me currently, so this is all from memory)
Just remove the drivers from your device manager so it's like your machine has never seen your phone before. Then on your phone enable usb-debugging.
When you then plug in your phone, you should get a usb icon up top on your phone's display... pull the window-shade down and click on the USB connection button. You should get a fullscreen window on your phone that says something like USB Connection with the friendly android waiving.
Now your PC should see your phone as a standard USB mass storage device.
try plugging the usb cable in another usb port on your computer and than try again.
Grimlocc said:
All I want to do is basically drag and drop some files from my PC to my phone. Thanks very much for your help.
Click to expand...
Click to collapse
oinkylicious said:
Settings --> Applications -- Development --> USB debugging.
Click to expand...
Click to collapse
Grimlocc said:
when I try to connect via kies I now get the message:
Reconnect the device in Samsung Kies (PC Studio) mode. Current connection mode not supported by Kies.
What am I doing wrong?
Click to expand...
Click to collapse
You're using Kies, that's what you're doing wrong. You said in your very first post you wanted to be able to drag and drop some files from your PC to your phone, so use USB debugging (say yes when it asks you) and Windows Explorer.
If you are using a custom rom like Checkrom Revolution you will need to install the kies support from kitchen pro.
Also are you using the cable that came with your phone?
I have found a few microUSB cables that will allow charge and wont allow data transfer like the new ones for nokia devices and some blackberrys.
It worked! The USB debugging thing!
Thanks to everyone who helped me out. The forum said I was limited to 5 thanks per day so if you didn't get one of the thanks I apologise. Thanks very much!
Hi,
Initially my Spice Dream UNO works perfectly when connected to Win-7. Then after it doesn't recognize as USB in my laptop. But it is able to charging...Tried some basic troubleshooting and even tried the USBDeview...but no luck...The USB tethering shows "USB not connected"....Tried other laptops but it didn't even try to install usb drivers...simply charging......Any help guys......
Solved!!!!
Hi Guys,
I found the solution myself...actually it seems childish....In the Storage settings there is a option called USB computer connection. I checked the option Media Device(MTP) back and it seems working fine....I think I should check my IQ....recently its degradinggggg.........
In my Moto G4, I am unable to see those options whenever I am connecting my phone to laptop. I tried in different laptop, and there also, same issue. It seems, in my phone, some service is missing or disabled which is not allowing to select those options such as - Use as mass storage device or use as image device or only charging. Kindly help.
Do anyone have any idea?
I can not Root my phone due to this problem. This is similar to this problem. https://forums.oneplus.net/threads/mtp-option-not-displaying-in-usb-computer-connection.304266/ . I tried these steps, not working. Kindly help