Whenever i plug in my i9000, it just pop up an error msg ÜSB Device not recognized. I'm trying to get Kies to recognize my i9000
I tried following this but it doesnt work at all.
it worked for me on kies, but i didn;t like it anyways
What i did was go to settings --> about phone --> usb settings
and try the other options (i'm using media player option, not sure why mass storage doesn't work)
Did you try to change the usb ports on your pc (stick the cable into different usb ports)?
Sent from my HTC Desire using Tapatalk
OrbNRG said:
it worked for me on kies, but i didn;t like it anyways
What i did was go to settings --> about phone --> usb settings
and try the other options (i'm using media player option, not sure why mass storage doesn't work)
Click to expand...
Click to collapse
yeah only the media player option was available to me as well.
Mikulec said:
Did you try to change the usb ports on your pc (stick the cable into different usb ports)?
Sent from my HTC Desire using Tapatalk
Click to expand...
Click to collapse
changing the usb port does help, however when i unplug it and restart my com, it does not recognize it anymore
What OS are u running?
Could also have something to do with the number of irq's on your motherboard.
PC's older then aprox. 3/4 years have less irq's and can have trouble with much external devices
keevy17 said:
Whenever i plug in my i9000, it just pop up an error msg ÜSB Device not recognized. I'm trying to get Kies to recognize my i9000
I tried following this but it doesnt work at all.
Click to expand...
Click to collapse
Have a look at this site from HardwareZone.com.
It's heavily populated but you only need to read the last five or so pages.
Beards said:
Have a look at this site from HardwareZone.com.
It's heavily populated but you only need to read the last five or so pages.
Click to expand...
Click to collapse
yeah i am looking at that thread too, however thanks for the link here, good for documentation as well, appreciated
keevy17, u have the phone already? If yes, you could help us resolve our questions in last pages of this thread:http://forum.xda-developers.com/showthread.php?t=694835&page=9
Q: Are there any notifications (on screen, backlight of buttons, ...) about missed calls, new mails, sms? Is there any notification when u charge the battery and the battery is fully charged?
Thanks in advance.
The default USB connection is to activate Samsung Kies. You'll have to go to settings->About Phone->USB Settings to change. If it doesn't work after changing, soft reset the phone and try again.
Caused me a bit of head scratching until I went through the options.
Now am having same problem, can'r see mass storage in my computer.
I think I read you need to enable USB Debugging then it will work. for both of you I believe.
With USB debug i can only use adb, nothing works. If i disable debug i can copy files via MTP protocol but mass storage doesn't work.
Edit.
Found the problem, it doesn't mount it self like Desire/N1 i had mount it my self. All working.
hassan said:
With USB debug i can only use adb, nothing works. If i disable debug i can copy files via MTP protocol but mass storage doesn't work.
Edit.
Found the problem, it doesn't mount it self like Desire/N1 i had mount it my self. All working.
Click to expand...
Click to collapse
hassan,
I've not yet had a chance to use the phone yet. Can you tell me how you mount the USB in order to use it with a PC?
Beards said:
hassan,
I've not yet had a chance to use the phone yet. Can you tell me how you mount the USB in order to use it with a PC?
Click to expand...
Click to collapse
It was bit tricky to start with as i thought my phone is broke. First go to setting > About > USB Settings > and select Ask on connection. Plug the cable in to the and from drop down notification bar and hit USB connected then you get the option to mount the mass storage.
hassan said:
It was bit tricky to start with as i thought my phone is broke. First go to setting > About > USB Settings > and select Ask on connection. Plug the cable in to the and from drop down notification bar and hit USB connected then you get the option to mount the mass storage.
Click to expand...
Click to collapse
Thanks hassan, I'll try it later.
If you want kies to work with the phone, dont kill MTP.. But kies is acting weird, soemtimes it doesnt see the phone, but after unplug and replug it works again.. I've given up on kies actually, over 100MB to download and worst than some beta software i've used.
also, i cannot get samsung apps to work on kies, it just error or timeout.. you guys hv any luck?
I haven't tried kies yet, i'll try when i get home from work.
Anybody know how to mount on a Mac? I tried changing the USB settings to Mount/Media, no luck. Any help would be appreciated.
Related
So just recently my usb and sd card decided to malfunction. My usb will charge via my pc but it comes up on the pc (Vista 32bit) as 'Windows cannot recognise this device' my drivers are up to date. However in my device management i did notice that my 'Mobile Device's' section had gone
I also tried formatting my sd card using a card reader, but it wont format it
I want to flash a new ROM, any way of doing it without an activesync connection? i managed to get the NBH image on my sd card by using another storage card but i still couldnt establish an activesync connection.
Any help would be much appreaciated as this is driving me crazy
Thanks, Dan.
DanMccoy1 said:
So just recently my usb and sd card decided to malfunction. My usb will charge via my pc but it comes up on the pc (Vista 32bit) as 'Windows cannot recognise this device' my drivers are up to date. However in my device management i did notice that my 'Mobile Device's' section had gone
I also tried formatting my sd card using a card reader, but it wont format it
I want to flash a new ROM, any way of doing it without an activesync connection? i managed to get the NBH image on my sd card by using another storage card but i still couldnt establish an activesync connection.
Any help would be much appreaciated as this is driving me crazy
Thanks, Dan.
Click to expand...
Click to collapse
Just checking, you did update your usb drivers according to this guide?
Otherwise, do you not have access to another pc?
You can also try this solution, it helped another user earlier
ClydeB1 said:
Just checking, you did update your usb drivers according to this guide?
Otherwise, do you not have access to another pc?
Click to expand...
Click to collapse
Yes i used that guide.
I have another pc and another laptop
seems to be doing exactly the same
i figured its a hardware config in my phone but i dont know how to sort it out so i need to flash a new rom somehow lol
i've tried my other usb lead too, but they both charge but wont connect to activesync or disk drive =\
DanMccoy1 said:
Yes i used that guide.
I have another pc and another laptop
seems to be doing exactly the same
i figured its a hardware config in my phone but i dont know how to sort it out so i need to flash a new rom somehow lol
i've tried my other usb lead too, but they both charge but wont connect to activesync or disk drive =\
Click to expand...
Click to collapse
I just edited my post above, another user came right by going to Settings\Connections\USB to PC and unticked the Enable fast data transfers.
ClydeB1 said:
I just edited my post above, another user came right by going to Settings\Connections\USB to PC and unticked the Enable fast data transfers.
Click to expand...
Click to collapse
Already tried that, just tried again and reset the device, still no luck
The Error message im recieving is:
'USB Device Not Recognised
One of the USB devices attatched to this computer and had malfunctioned, and windows does not recognise it.'
DanMccoy1 said:
Already tried that, just tried again and reset the device, still no luck
The Error message im recieving is:
'USB Device Not Recognised
One of the USB devices attatched to this computer and had malfunctioned, and windows does not recognise it.'
Click to expand...
Click to collapse
Have you tried a simple thing like rebooting the pc? That sounds however more like a hardware issue on the pc or phone. What happens if you plug another usb device into the port eg a usb flash drive, does that pick up? In your device manager, are all usb devices functioning properly? Perhaps try to roll back the drivers on the ports if possible and re-install the usb driver update.
ClydeB1 said:
Have you tried a simple thing like rebooting the pc? That sounds however more like a hardware issue on the pc or phone. What happens if you plug another usb device into the port eg a usb flash drive, does that pick up? In your device manager, are all usb devices functioning properly? Perhaps try to roll back the drivers on the ports if possible and re-install the usb driver update.
Click to expand...
Click to collapse
Yeah Rebooted Everything About 10 Times Lol
All My Other USB Devices Are Fine
I Cant Roll Back The Driver In Device Manager Because It Apparently Isnt There, But Nothing Has Been Changed, WMDC Has Been ReInstalled, Net Framework Reinstalled Etc Im Just Not Getting Any Mobile Devices Show Up.
Okay, you need someone more technical than me then bro. Sorry, but I've run out of ideas.
ClydeB1 said:
Okay, you need someone more technical than me then bro. Sorry, but I've run out of ideas.
Click to expand...
Click to collapse
Ah. Thanks Anyway Bro
If you've changed usb cables, and you've checked the usb to connection setting is not on advanced, then it means the usb port & possibly main board are damaged. Did you hardspl your device?
DRTigerlilly said:
If you've changed usb cables, and you've checked the usb to connection setting is not on advanced, then it means the usb port & possibly main board are damaged. Did you hardspl your device?
Click to expand...
Click to collapse
Yeah Ages Ago, Im All Up To Date With HSPL And What Not, Usually Flash ROM's Every Week So, Im Pretty Annoyed Lol.
Other Things Work In The USB Port. But It Just Charges If I Plug My Blackstone In
just re-install microsoft windows mobile centre and you will be ready to go.But install with phone NOT Pluged.
i had the same problem here.
regards
My Vibrant doesn't connect as a data storage device around the time I started using Kies. My phone is 100% stock beyond some attempts to fix the GPS (which didn't work and returned to stock). I installed Kies to do USB tethering and changed the setting on the phone to ask in which mode I want to connect.
Last week I was having trouble with connecting in Kies mode and tethering. I then noticed that I could only connect to the PC when I selected the phone option for Kies and not as a media player or storage device. I proceeded to uninstall Kies from my PC to see if that fixed the drivers. No go. I tried another PC which has never had Kies on it and also no go.
Here are the symptoms:
1) Plug USB cable to Phone
2) Menu on phone shows: Select Kies, Media Player or Storage
3) Select Storage
4) USB symbol appears and goes through connecting to connected state
Normally at this point the Win7 PC will pop-up with an auto start window asking if you want to open the storage device or transfer photos. In my case nothing appears. I also check My Computer and the phone is not mounted it doesn't appear later. I suspect a phone issue. Is there a way to fix this without doing a factory reset? Reboot doesn't change anything.
Anyone know a fix for this problem?
Make sure to use these drivers
http://forum.xda-developers.com/showpost.php?p=7238660&postcount=1
Stupid question, but are you pressing "mount" on your phone when your in USB storage mode?
note to self: read OP *before* replying
If it's still set on Ask on Selection try changing it to Mass Storage. I recall reading something that said Ask on Selection doesn't work right. I just toggle it between Mass Storage and Kies manually.
Relikk356 said:
Make sure to use these drivers
http://forum.xda-developers.com/showpost.php?p=7238660&postcount=1
Stupid question, but are you pressing "mount" on your phone when your in USB storage mode?
Click to expand...
Click to collapse
Changed to Developer Mode USB and forced reinstall of the drivers. Thanks for your help guys.
I used to connect my mobile to my laptop using usb but now a days when I connect it only the phone enters the charging mode ..the usb mode connection has disappeared..
I used to connect my phone to myphoneexplorer software using debugging mode..
Please help.
Sent from my GT-I5801 using XDA App
neo1691 said:
I used to connect my mobile to my laptop using usb but now a days when I connect it only the phone enters the charging mode ..the usb mode connection has disappeared..
I used to connect my phone to myphoneexplorer software using debugging mode..
Please help.
Sent from my GT-I5801 using XDA App
Click to expand...
Click to collapse
Hi happened to me too.
Type *#7284#, so you'll enter PhoneUtil and be sure both the "UART" and the "USB" are set on PDA!
zenza86 said:
Hi happened to me too.
Type *#7284#, so you'll enter PhoneUtil and be sure both the "UART" and the "USB" are set on PDA!
Click to expand...
Click to collapse
Thanks a lot.. worked..!!!
neo1691 said:
Thanks a lot.. worked..!!!
Click to expand...
Click to collapse
you're welcome...
Help!
I rooted my Galaxy 3 and since then i can only connect and transfer data between my phone and my computer by allowing USB debug mode. It used to work without a driver installed on my pc (only data transfer mode like with a pendrive), but now my laptop (which doesn't have Kies on it) doesn't recognize it. I tried it with my TV and it said "unsupported USB device". It used to work as a pendrive but now nothing recognizes it:---( Please help:-C
zenza86 said:
Hi happened to me too.
Type *#7284#, so you'll enter PhoneUtil and be sure both the "UART" and the "USB" are set on PDA!
Click to expand...
Click to collapse
Thank you very much!!!
I had this problem today and the first thing I did is what you said... and it worked!
TKS
Linkakos said:
I rooted my Galaxy 3 and since then i can only connect and transfer data between my phone and my computer by allowing USB debug mode. It used to work without a driver installed on my pc (only data transfer mode like with a pendrive), but now my laptop (which doesn't have Kies on it) doesn't recognize it. I tried it with my TV and it said "unsupported USB device". It used to work as a pendrive but now nothing recognizes it:---( Please help:-C
Click to expand...
Click to collapse
Well, you've tried what they said above? About the code and be sure of the UART and USB mode are enabled in PDA? Let us know if you tried.
ya i tried it... worked well!!
USB
Hi to all!
I have a similar problem pls help. I haven't had this before. When I connect to the computer (USB) the phone screen is just blinking with a message INITIALIZATION, and can't connect. Not even in developer mode. And I also tried this *#7284#. Still the same not working. I'll appreciate your help.
Oldfrog said:
Hi to all!
I have a similar problem pls help. I haven't had this before. When I connect to the computer (USB) the phone screen is just blinking with a message INITIALIZATION, and can't connect. Not even in developer mode. And I also tried this *#7284#. Still the same not working. I'll appreciate your help.
Click to expand...
Click to collapse
do u MOUNT your sd card from the notifications bar after connecting your usb???
Neo
Hi! There is no notification bar on the phone screen, because it's blinking. Or you mean this notification should be on the computer?
Thank you in advance!
Oldfrog said:
Hi! There is no notification bar on the phone screen, because it's blinking. Or you mean this notification should be on the computer?
Thank you in advance!
Click to expand...
Click to collapse
Do you mean that the usb initialisation is on when you connect the usb to the computer...
What mode is the usb on?
Eg samsung kies, mass storage etc?
Sent from my GT-I5801 using XDA App
Sorry but there was no notification bar on the phone. Or you mean I should do something on the pc? Now I can connect, but I had to format my sd card. Thank you for your replay!
Oldfrog said:
Sorry but there was no notification bar on the phone. Or you mean I should do something on the pc? Now I can connect, but I had to format my sd card. Thank you for your replay!
Click to expand...
Click to collapse
What he is trying to say, is wich is the default action when you connect the USB.
Example: every time that you connect the USB the phone gets into Kies mode, or Mass Storage.
My G3 is configured to ask what to do...
welty said:
What he is trying to say, is wich is the default action when you connect the USB.
Example: every time that you connect the USB the phone gets into Kies mode, or Mass Storage.
My G3 is configured to ask what to do...
Click to expand...
Click to collapse
U should find it in settings> about phone> usb settings
Sent from my GT-I5801 using XDA App
Hi,
EDIT * I have found a solution in that I can connect via WI fi so that's pretty good but if anyone can help me with the USB issue, it would still be appreciated. It seems that the Wi Fi connection is more limited as I am unable to view things in explorer *
hoping to get some help using my USB to connect to my PC. I've installed Kies but when I try to connect to my PC it just keeps on trying to connect but never actually does it.
I have looked for guidance on this but keep coming across the instructions to go into 'about phone > USB settings' etc etc. However, I do not have a USB settings in about phone. In fact, there is nothing at all about USB in About Phone. I do have a 'USB Utilities' in Wireless and Networks but all that gives me the option to do is 'Connect Storage to PC'. I have a memory card in my phone.
When I do connect to the USB cable, with Kies open, when windows 'finds new hardware' it keeps saying a problem occurred during installation.
Please can anyone help me out? All I want to do is basically drag and drop some files from my PC to my phone. Thanks very much for your help.
Settings --> Applications -- Development --> USB debugging.
Thanks for that!
It got me a little further. I also unmounted then remounted the SD card. However, when I try to connect via kies I now get the message:
Reconnect the device in Samsung Kies (PC Studio) mode. Current connection mode not supported by Kies.
What am I doing wrong? Do I have to re click the USB settings on the phone before connecting to Kies now that it's installed the hardware on my PC?
Grimlocc said:
Thanks for that!
It got me a little further. I also unmounted then remounted the SD card. However, when I try to connect via kies I now get the message:
Reconnect the device in Samsung Kies (PC Studio) mode. Current connection mode not supported by Kies.
What am I doing wrong? Do I have to re click the USB settings on the phone before connecting to Kies now that it's installed the hardware on my PC?
Click to expand...
Click to collapse
Turn off USB-Debugging
Don't connect phone yet
Open Kies
Open the Tools menu -> Troubleshoot connection error
Go through the guide and let it reinstall the drivers.
Connect you phone, and let it connect
The default setting has the USB debugging tick greyed out. When I select it, it asks me if I want to allow debugging.
Do you mean that I shouldn't allow debugging and then connect (after reinstalling Kies) or should I allow it and connect? Sorry for my noobishness, Android is all completely new to me.
You should untick the USB-debugging - Then reinstall drivers NOT entire Kies
OK, it's unticked and I'm reinstalling the drivers via troubleshooting.
Do I need to unmount then remount the SD card before connecting my phone? Thanks for your help btw.
Shouldn't make a difference
Bah, I still have the same problem. It just says that there was a problem installing the hardware when I plugged in the phone.
After reinstalling the drivers, i shut down Kies then reopened it. I then plugged in the USB and then plugged the USB into my phone.
When I first installed Kies yesterday, Microsoft Active Sync kept on trying to activate and ask for a CD. It kept on holding up Kies. In the end I uninstalled Active Sync. Also, I still have Samsung PC Studio on my PC from when I had a Samsung a few years ago. It was one of those old slider phones, not a smart phone. Could that be part of the problem? I was hoping to keep it because it's proved to have the best media player I've ever had.
I just don't know what I'm doing wrong here.
Try without restarting Kies.
What part of the drivers aren't installed? (Check device manager)
In Device Manager, under Portable Devices there's something called Android MTP that has an exclamation mark next to it. It says it's not configured correctly and that 'No driver files are required or have been loaded for this device'. I'll reinstall the Kies drivers now.
Thanks for this help mljjlm
P.S. Now that I've unplugged the phone, the MTP thing isn't showing in the device manager list anymore.
Grimlocc said:
P.S. Now that I've unplugged the phone, the MTP thing isn't showing in the device manager list anymore.
Click to expand...
Click to collapse
Of course, it's a part of the phone, and it should not be plugged in because they would have to force a reboot when reinstalling drivers (which might sort your problem btw)
Reinstalled the Kies Drivers and then plugged in my phone but got the same problem. It says a problem occurred. Same device now has a problem in device manager. Maybe I should just uninstall everything and restart? Should I uninstall the old PC studio too?
Just try the reboot without uninstalling anything and then plug the phone in when your pc has booted
Argh! Still didn't work! I think there must be a problem with my PC, well, I'll try doing full uninstalls and reinstall it all. I have to go now as well so I'll have to try again tomorrow.
Thanks very much for your patience mljjlm. It has been greatly appreciated
Are you trying to just transfer files back and forth? If so... forget using Kies.
(I don't have a micro-USB cable with me currently, so this is all from memory)
Just remove the drivers from your device manager so it's like your machine has never seen your phone before. Then on your phone enable usb-debugging.
When you then plug in your phone, you should get a usb icon up top on your phone's display... pull the window-shade down and click on the USB connection button. You should get a fullscreen window on your phone that says something like USB Connection with the friendly android waiving.
Now your PC should see your phone as a standard USB mass storage device.
try plugging the usb cable in another usb port on your computer and than try again.
Grimlocc said:
All I want to do is basically drag and drop some files from my PC to my phone. Thanks very much for your help.
Click to expand...
Click to collapse
oinkylicious said:
Settings --> Applications -- Development --> USB debugging.
Click to expand...
Click to collapse
Grimlocc said:
when I try to connect via kies I now get the message:
Reconnect the device in Samsung Kies (PC Studio) mode. Current connection mode not supported by Kies.
What am I doing wrong?
Click to expand...
Click to collapse
You're using Kies, that's what you're doing wrong. You said in your very first post you wanted to be able to drag and drop some files from your PC to your phone, so use USB debugging (say yes when it asks you) and Windows Explorer.
If you are using a custom rom like Checkrom Revolution you will need to install the kies support from kitchen pro.
Also are you using the cable that came with your phone?
I have found a few microUSB cables that will allow charge and wont allow data transfer like the new ones for nokia devices and some blackberrys.
It worked! The USB debugging thing!
Thanks to everyone who helped me out. The forum said I was limited to 5 thanks per day so if you didn't get one of the thanks I apologise. Thanks very much!
Trying to connect my phone to my pc running windows 10. i have installed all drivers (i think)
and the usb menu on the phone only comes up with usb debugging enabled in dev settings. i can select "file transfer" mode but nothing happens on the PC end. any help or advice would be much appreciated
qs504792 said:
Trying to connect my phone to my pc running windows 10. i have installed all drivers (i think)
and the usb menu on the phone only comes up with usb debugging enabled in dev settings. i can select "file transfer" mode but nothing happens on the PC end. and help or advice would be much appreciated
Click to expand...
Click to collapse
Same problem here.. LG doesnt take care of such things.. no wonder Samsung is taking the market..
I just connected my AT&T v20 to my aliensware 15r2 laptop and was able to import my pics with no issues setting my phone to ptp. Then to access both the internal storage and sd card through file manager I set phone to mtp.
I did nothing special just plugged in phone to laptop and selected what setting on the phone. Oh and running win 10. So don't think its the phones software but maybe your computer missing certain drivers or something. So hope this helps
Sent from my LG-H910 using Tapatalk
I had a problem on my Win 7 laptop. It connected, loaded drivers and opened as a removable drive. However, as I continued using the ?, my mouse started to register my clicks as drags and did so until I unplugged the ? .
Tappin' and talkin' with Tapatalk.
hmm. i still haven't been able to get it to work. might try using the LG PC suite pc app to connect over wifi
Anyone have issues after applying liquid spray for a screen protector? I just finished applying and now whenever I connect the phone LG V20 it still thinks its connected to usb. I restarted phone and it went into update firmware connection screen. I had to get into recovery and clear dalvik and cache and it rebooted and everything is working again. I transferred files from PC and again the same issue. Could it be liquid damage? Or is this something else? Thank you.
You'll need to turn on the Developer Option and then scroll down to Select USB Configuration > MTP > ok This is what I did to enable my desktop to read my LG V20 SD Card and memory.
Could it be a cable issue? I was warned once.
In fact, looks like nothing happens on my pc but I can browse the internal memory n sd card.
"Have you tried turning it off and on again?" - it crowd
Seriously That was the solution for me... (Oh, I miss that show so much )
i have connection problems myself but i was forced to do a hard reset after my touch screen failed and ehen ever i try to connect to pc i get device malfunctioned message and cant connect to pc and theres no was of changing to mtp or anything if i cant get intot he phone as far as i know if you have any ideas on pls let me know