I had a hardware-locked Vibrant and requested a replacement from T-Mobile. I get shipped a new unit, and it works perfectly. I migrated everything to the new replacement- internal sdcard files, external sdcard files, apps and data (backed up and restored using Titanium backup), etc. I'm happy with the new phone.
So I tried using ODIN to restore the defective old Vibrant back to factory firmware. I downloaded these stock firmware images, I did an MD5 integrity check and it passed, and I followed all instructions on the post. ODIN never worked or appeared to do anything (after waiting half an hour), even after installing Samsung Kies + drivers, and rebooting my PC 3 times. So after 4 or 5 hours of trying all this, I turned off my defective phone and power it back on. It appears that ODIN ****ed it up, and the connect-phone-to-PC image appears on screen. I tried every method to enter download mode, and nothing works. I already shipped the device to T-Mobile since I was close to being over my return duration limit (7 days to return defective device).
---
The problem is that it's possible that my internal sdcard, system, data, and everything else is still on the phone but it just couldn't boot. OR... maybe ODIN repartitioned everything (I checked "repartition" in ODIN after a few fails) and therefore nothing is on the phone which is why it couldn't boot. I REALLY hope that my data is not on there.
My question is if T-Mobile will be responsible with my data (if it's still on there), or if some stupid hooligan working at T-Mobile will try to dump my phone's contents and take the dumped image and use it for his own purposes.
Another question is if ODIN detects the phone, but appears to be stuck in the process of flashing, will the data on the phone be formatted? If this is the case, then I do not need to worry about my data being stuck on the shipped phone.
Related
I just installed PSX for my galaxy and installed the all roms app...(forgot name) but i was downloading a game and then i left my phone alone to let it download.
10 minutes later my phone wouldn't go onto the lockscreen aka froze. so i decided to take the battery out...(mind you the download wasnt finished) and now when i boot up the phone it just goes the the "S" logo and either turns off...or freezes.
note* I can access ADB through 3 button reset.
However i do not want to wipe data. as i have important pictures on my internal sd and videos. i was thinking of using the "wiping cache option" cause my theory was that the frozen app was still in memory or something....can anyone give me suggestions to fix this issue?...try to avoid "wipe data option"
thanks.
edit** have got into download mode and tried to use ODIN but odin doesnt see my phone....however kies does. but kies cant connect to it. keep saying connecting to device....any helP??
flashing a rom doesn't delete your pictures I think
just contacts, sms, apps etc
but it is better if someone else also verifies it
edit: oh sorry I just saw you wrote cache... i am not sure what that does. I don;t think it deletes your data.
allotrios said:
flashing a rom doesn't delete your pictures I think
just contacts, sms, apps etc
but it is better if someone else also verifies it
edit: oh sorry I just saw you wrote cache... i am not sure what that does. I don;t think it deletes your data.
Click to expand...
Click to collapse
i am waiting for someone to clarify that i can "wipe cache". By the way, i do also require my SMS messages, there is some delicate information within them. i am currently googling wipe cache. any other help is greatly appreciated. thanks for the quicky reply allotrios
just wiped cache. phone still wont boot to main homescreen it freezes, and/or shuts off. last resort is wipe data. anyone offer a suggestion other than that?
WTH? i just wiped date/factory reset and hit reboot and it STILL doesnt load. it goes to the "S" symbol and shuts off or freezes.
edit* trying to find firmware for i9000M canada version. Attempting to use odin but cant find links
just got pit file! where can i get the pda phone and csc files? what else do i need to flash it using odin? im constantly googling and trying to do this before i sleep
edit** just tried to use odin with a different firmware with all correct files. when pluggin in usb cable in download mode, Odin doesnt see my phone.
kies sees the device but keep saying "connecting to device"
welcome to my world........flashes fine, wiped data/cache, still freezes at the 's'. i just sent my phone in after i couldn't get it going after flashing 40 times.
it would seem your sdcard is corrupted or fried.........try flashing some more roms (jg9 or jh2) with different pits (512 and 803) and wipe data/cache. samfirmware.com for the roms.
as well, if you do not have the 3br fix to get into download mode (since you said you get into download mode via adb), i would suggest you flash the fix asap before you lose the ability to use adb.
wang1chung said:
welcome to my world........flashes fine, wiped data/cache, still freezes at the 's'. i just sent my phone in after i couldn't get it going after flashing 40 times.
it would seem your sdcard is corrupted or fried.........try flashing some more roms (jg9 or jh2) with different pits (512 and 803) and wipe data/cache. samfirmware.com for the roms.
as well, if you do not have the 3br fix to get into download mode (since you said you get into download mode via adb), i would suggest you flash the fix asap before you lose the ability to use adb.
Click to expand...
Click to collapse
ive been sitting here for 3 hours...have a exam tommorow and am fed up. Problem is i bought this phone from a friend, so warrranty is out of the option.
The other problem WHICH can be solved somehow...is that my computer sees my phone. (kies does..but wont connect)..i can "technically" use odin if i can somehow get my phone to work with it.
If the case that my internal sd card is fried....i dont have warranty, do i have manufacturer warranty?. aka samsung?. i dont know just a thought.
can you get into download mode? i assume no as i had the same issue, and adb wouldn't work unless the phone had fully booted up. odin will only recognize your phone in download mode.
the only options you have are:
make a jig with 301k resistor to get your phone into download mode and try flashing
send your phone out to be repaired (some other thread mentioned repair shop in ontario)
go into bell and see if they will take your phone in for repair (samsung 1yr warranty)
wang1chung said:
can you get into download mode? i assume no as i had the same issue, and adb wouldn't work unless the phone had fully booted up. odin will only recognize your phone in download mode.
the only options you have are:
make a jig with 301k resistor to get your phone into download mode and try flashing
send your phone out to be repaired (some other thread mentioned repair shop in ontario)
go into bell and see if they will take your phone in for repair (samsung 1yr warranty)
Click to expand...
Click to collapse
i CAN get into DOWNLOAD MODE. but problem is ODIN doesnt see my phone
edit* could you give me a link to that store?
ah, ok...........i had the same problem, but after i installed the drivers for it, no more problems.
you should try that before you send your phone in.
edit: found the link
http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x86.shtml
If you're phone can get into download mode then it should work. However, Odin is somewhat temperamental, have you tried Heimdall?
Benjamin Dobell said:
If you're phone can get into download mode then it should work. However, Odin is somewhat temperamental, have you tried Heimdall?
Click to expand...
Click to collapse
i have just woken up. my phone is now dead, i cant turn it on. i have tried connecting the charger and it wont charge my phone......anyone have any ideas? is it bricked? internal SD card fail?......i dont have Bell warranty, would samsung canada cover this issue? as internal sd cards area known to fail?......thanks.
edit** never mind, it is now charging. i will keep this thread updated when i finish my exam today and let everyone know where my phone stands. So far i think it is a internal sd card error. But i am hoping after a full charge it may work again.
hmm still same thing, i load to "S" screen and it shuts off, i can still access 3 button recovery and download mode. i just called samsung too, they said to call my service provider, but problem is i bought the phone second-hand.
Have just flashed JH2 firmware and JG5 firmware on phone with ODIN, phone still boots up to "S" logo and then shuts off .
edit** only JH2 firmware will go through to my phone on ODIN, i have tried a 2nd time, it goes to the S logo....looks like it will load to phone, and then just doesnt and shuts off.
So is it safe to say the phone is bricked?.....i have heard of someone in this forum saying there was a unofficial samsung store somewhere in Ontario that fixes galaxy phones?....anyone can link me to this?. I don't have warranty as i bought it 2nd hand. hmm..now idont know what to do, besides, i guess, save up and buy a new phone.
edit** it cant be bricked if i can still access recovery and download mode? right.
Phone is OFFICIALLY bricked, tried flashing a 803 pit file, now it wont power on, or charge through wall charger. thanks to all who helped in little ways. but looks like ill have to buy a new phone.
jark99 said:
edit** it cant be bricked if i can still access recovery and download mode? right.
Click to expand...
Click to collapse
that would normally be true........with one exemption to the rule.......if your sdcard is corrupted/fried.
if you have flashed back to 2.1 with repartition and wiping multiple times with different PITS, and still the same issue, then nothing will help (at the moment) aside from sending it in.
I Had this exact same issue a week ago. My guess is that your internal SD is dead and you will need to send it out for repairs. Im still waiting for mine from bell to see if they only reflashed or replaced the whole motherboard.
Light
Problem is i dont have Bell warranty....so i am kinda a goner. unless someone has a suggestion?
Just because you don't have warranty doesn't mean you can't pay to get it repaired (at least get it inspected and a quote). Should be much cheaper than saving up for a new one!
If you bought it from your friend, they should be able to send it on your behalf.
Sorry to hear about your issues :/
JimiJam said:
Just because you don't have warranty doesn't mean you can't pay to get it repaired (at least get it inspected and a quote). Should be much cheaper than saving up for a new one!
If you bought it from your friend, they should be able to send it on your behalf.
Sorry to hear about your issues :/
Click to expand...
Click to collapse
In Ontario, the only way to get our phone repaired is through Bell sending it to a service center, Problem is my friend doesnt have the receipt. He bought it from a friend. Its past through 3 hands to get to me. Friend's Friend > My Friend > ME.
So...i am currently looking at cell repair shops to see if they can fix this problem....BUT i am assuming alot of them use Odin or some sort of flashing, WHICH i have already done .....
I also called 5 bell stores to see if i could get the receipt printed out using the IMEI code, all of them said this information cannot be provided due to "privacy issues." They told me to call Samsung or talk to a 3rd party cell repair center.....fml.
Hi all,
My firmware has been the same since the day I bought it, which also was the day of release here in the UK, so it was 2.3.3. Today it said that a firmware upgrade was available, so I selected to download and install it. After a while it rebooted, showed it installing, then booted up normally. I got the main screen again and it said there were more software updates available, so I said to install those too. Again it rebooted, showed installation progress, then when booting up, it now gets permanently stuck on the boot screen where it just shows the Samsung Gaiaxy S II logo (along with the GT-I9100 text). I've left it for over 30 mins and nothing changes. I've tried rebooting several times, both with charging cable in and out, removed the battery for a few minutes and tried again, but it won't get beyond this screen anymore.
I looked at the thread about what to do about this situation (boot loop) which involved erasing user data, so I did this. The message that also came up during erasure said that it wiped the cache too. Tried rebooting after that but it's still stuck.
Is there a way to fix this?
Note that I've never installed custom firmware and never rooted my phone. I also don't have a 32-bit version of Windows, so can't use Odin (it never picks the device up). Plus I don't wish to void the warranty. Is it possible to get the official update zip package which I can flash from the recovery menu?
Thanks
Thom
Is there not a warranty provided by your cell carrier? I know in the us most carriers provide a 1 year warranty with all devices. They would exchange it gladly especially since you did everything by the rules.
Sent from my i897 running MIUI 1.8.19 with TalonMTD kernel.
xijar said:
Is there not a warranty provided by your cell carrier? I know in the us most carriers provide a 1 year warranty with all devices. They would exchange it gladly especially since you did everything by the rules.
Click to expand...
Click to collapse
Yes, it's under standard warranty. I bought it sim-free without being tied to a network. I have already contacted Samsung and they said they'll email me details of the service centre to return it to, but I was hoping for a solution before needing to do that.
Nothing you can do without odin picking the phone up.
I use 64bit windows and it picks up fine, make sure you have the drivers installed (see the link in my sig, for my 4shared, where you can get them) or if you have kies installed you have them but make sure to kill all kies processes first in task manager.
But in the end, best bet is just to send it in, to make sure you dont void your warranty
Sorry this is a mistake.
darkixion said:
Hi all,
My firmware has been the same since the day I bought it, which also was the day of release here in the UK, so it was 2.3.3. Today it said that a firmware upgrade was available, so I selected to download and install it. After a while it rebooted, showed it installing, then booted up normally. I got the main screen again and it said there were more software updates available, so I said to install those too. Again it rebooted, showed installation progress, then when booting up, it now gets permanently stuck on the boot screen where it just shows the Samsung Gaiaxy S II logo (along with the GT-I9100 text). I've left it for over 30 mins and nothing changes. I've tried rebooting several times, both with charging cable in and out, removed the battery for a few minutes and tried again, but it won't get beyond this screen anymore.
I looked at the thread about what to do about this situation (boot loop) which involved erasing user data, so I did this. The message that also came up during erasure said that it wiped the cache too. Tried rebooting after that but it's still stuck.
Is there a way to fix this?
Note that I've never installed custom firmware and never rooted my phone. I also don't have a 32-bit version of Windows, so can't use Odin (it never picks the device up). Plus I don't wish to void the warranty. Is it possible to get the official update zip package which I can flash from the recovery menu?
Thanks
Thom
Click to expand...
Click to collapse
How did you erase user data?
Sent from my GT-I9100 using XDA Premium App
inkyadrian said:
How did you erase user data?
Click to expand...
Click to collapse
When it was switched off, I held down Vol-Up, Home and the power button. There was an option in the menu called "wipe data/factory reset". There's also a "wipe cache partition" option, the action of which is performed in the wipe data option anyway.
Hello,
I've got (had) an SM-G900W8 running the XtreStoLite v2.0 LP BETA5 ROM on the XXU1BOA3 kernel. I installed TWRP 2.7 via Odin, and left the latest modem and bootloader updates I got through KIES3.
At which point I got the chance to sell the handset on Kijiji, provided I could get the stock ROM back on.
I downloaded the latest Odin (3.09) and the correct Firmware for my handset from sam mobile, and factory reset the device. I pulled the battery, let it sit, and tried to flash once I got it back up in download mode, and it wouldn't work.
This isn't too much of a surprise to me, because since I flashed TWRP, Odin hasn't ever worked for me. Regardless of how many times I've tried to flash the modem and/or BL that XtreStoLite asked me to use in their how to thread, it wouldn't work. I was willing to ignore it b/c the ROM worked with the modem and BL it was running.
My problem is that once I tried to reboot, the system hung at the BL animation. I went back into recovery, and tried to move my backups off my external storage (I had 2 back ups that were about 2 or 3 gigs each, too much for the local storage) to the local card and restore (b/c TWRP won't restore from the external card) and the back ups failed.
Now I've got the BL screen, but it won't advance to the animation, and it won't boot to TWRP either.
I tried to restore from KEIS, but it says my device isn't supported by KIES 3 (it is). I could really use a hand here. Every time I try something this gets worse. I'm no pro, but I've had no problem figuring this out on my old HTC handsets.
My note 4, randomly crashed, running completely stock.
Began bootlooping and hasn't stopped.
Have downloaded firmwares from Samsung-Firmware . org, as SamMobile will literally not allow me to download anything for free??
No firmware has worked on the device, Have tried numerous PDA versions as I am unsure which the phone originally is.
The first firmware gave the error "dm-verity verification failed" in the recovery menu.
Have wiped cache and data.
Note: This is actually the second N910F which had corrupted itself and stopped working.
Help! :angel:
Do you want to recover some data from it?
If Not than you can try factory reset from Recovery menu.
Other than that it might be memory corrupted or your battery.
Try to change the battery.
a602820922 said:
Do you want to recover some data from it?
If Not than you can try factory reset from Recovery menu.
Other than that it might be memory corrupted or your battery.
Try to change the battery.
Click to expand...
Click to collapse
No data to recover, have tried factory reset from recovery menu, sure will try another battery.
a602820922 said:
Do you want to recover some data from it?
If Not than you can try factory reset from Recovery menu.
Other than that it might be memory corrupted or your battery.
Try to change the battery.
Click to expand...
Click to collapse
New battery: Allowed the phone to boot past the first "Samsung Note 4" screen to : "Samsung" logo, but the phone made a loud beep/screech.
If you want to reflash the Stock ROM search for a version on https://updato.com
I just reflashed mine (g910f) even twice as I had an Infini-Boot, too. After cleaning Dalvik/Cache and formatting data, taking out the battery, after some time it suddenly displayed that it's going to setup apps and it works since then ...
So maybe just be patient.
TheEnda619 said:
My note 4, randomly crashed, running completely stock.
Began bootlooping and hasn't stopped.
Have downloaded firmwares from Samsung-Firmware . org, as SamMobile will literally not allow me to download anything for free??
No firmware has worked on the device, Have tried numerous PDA versions as I am unsure which the phone originally is.
The first firmware gave the error "dm-verity verification failed" in the recovery menu.
Have wiped cache and data.
Note: This is actually the second N910F which had corrupted itself and stopped working.
Help! :angel:
Click to expand...
Click to collapse
to get the latest stock rom for your device, free and fast
look what you have to do:
download this (windows ) application and install it on your windows pc.
This is the aplication that will allow you to search and download the latest stock rom for your phone.
It connect to Samsung servers and in very little time you will have a new stock rom on your pc.
choose samfirm 3.06
extract it on a folder on your PC and run samfirm.exe
in the opening menu type
SM-N910F(or T/V/W etc your phones model)
REGION..... xxx (your region code)
these 2 you can find in a sticker under your battery if you open the phone and take off the battery
tick '' BINARY NATURE''
(If you dont tick BINARY...'' you will get the whole stock rom in one file xxxx.tar.md5 to flash it in the oding using the AP tab)
CHECK UPDATES>DOWNLOAD
THIS WAY YOU WILL GET THE LATEST STOCK ROM FOR YOUR PHONE/REGION
Binary nature means the rom split in 4 files
1. BL- bootloader
2.AP - rom
3. CP - modem
4. CSC - Customer support code(region/country)
This is what a stock rom is consist of
this kind of rom is also called REPAIR ROM, because you can use it to repair your phone.
If you look in odin you will find exactly these 4 entries.
So you can put each in the appropriate box and flash them all and so have a stock rom.
push start
Wait until rom flashes and phone reboots.
Hopefully it will solve your problem and everything will go as we all wish to.
BUT, from what you are describing, i am afraid for 2 things:
1. Your battery is almost dead, thats the good scenario .
With 20 $ you will solve it.
So new battery, new rom> problem solved, or
2. You are starting to have the emmc failure on your phone.
Thats a tough one.
Lets hope its not the case.
Just in case
https://forum.xda-developers.com/note-4/help/note-4-freezing-restarting-t3348821
https://forum.xda-developers.com/note-4/snapdragon-dev/note-4-debrick-img-t3488114
good luck my friend
Hello everyone,
My old S10+ suddenly shut down and entered a bootloop. The last things I did were the following:
copied some data from my old to my new phone
Switched my SIM-card to my new phone
watched some Youtube in my browser (since stock had some issues)
Then, out of nowhere, my android system turned off. Since then it is stuck in a bootloop.
I can still access Android Recovery and download mode. I tried re-flashing stock firmware, but I get the error that the Android firmware seems to be corrupt.
My question is: How can I get my phone to work again without losing my data?
There is still some important data left on my old phone. My 2FA app for instance. So I would rather go to a repair shop and pay instead of losing said data.
But before I do that I wanted to get some advice what else I may be able to do. I haven't tried sideloading an OTA since I don't quiet understand it and want to be on the safe side. persist.safemode.sys does not seem to exist. And I read about perhaps backing up my "emmc" with TWRP but, again, I don't quiet grasp the concept yet.
I have some experience with adb, ROMs and flashing. The latest recovery-logs are attached, if they are of any help
Well, repair shop went and formatted everything
Even though I asked them not to
Let this be a lesson for everyone: If you care about your data, back it up AND don't bring it to a repair shop
DasMalzbier said:
Well, repair shop went and formatted everything
Even though I asked them not to
Let this be a lesson for everyone: If you care about your data, back it up AND don't bring it to a repair shop
Click to expand...
Click to collapse
In the future use a SD card* as a data drive. All critical data goes there. Do Not encrypt it.
Had you done that you probably be ok. Always backup redundantly and regularly to at least 2 hdds that are physically and electronically isolated from each other and the PC.
*A V30 rated Sandisk Extreme is a good choice