Related
Hello everyone,
My phone just recently started having this issue, where the screen freezes when it first turns on. If I try plugging it in to charge, it freezes on the battery charging screen; there is no animation that indicates that it is charging. I've tried going into recovery mode but all there is is something that says "MMC: mmc_read fail Movinand Checksum Confirmation Fail". I can, however, go into download mode, where I can install a custom OS. It seems that this screen functions fine and my instinct is telling me that if I want to continue to use my phone, I'll have to reinstall the firmware. I'm not interested in installing a custom OS but I do just want to get my phone back. I did not do anything to my phone, I turned it off for a flight and when I landed, I turned it on and it started freezing when I tried using it. I was able to send out a few texts before it froze and I had to restart the phone but then it just wouldn't get past the Samsung Galaxy S5 screen.
Thank you for your help.
If I understand correctly your phone is not rooted ? Then only a factory reset will help you I think ...
In my experience, a factory reset will fix that, but wipe data also. On S3 and Note 3, I have Odin'ed stock firmwares over stock firmwares before and it has retained the data while fixing the problem. You may want to look into this method.
BCSC said:
In my experience, a factory reset will fix that, but wipe data also. On S3 and Note 3, I have Odin'ed stock firmwares over stock firmwares before and it has retained the data while fixing the problem. You may want to look into this method.
Click to expand...
Click to collapse
I've sort of looked into the Odin method but I'm still slightly confused and a little reluctant do so without clear instructions. Do you know of a particularly good tutorial that could help me with this? I do want to retain some of the data.
Thank you for your help, if this doesn't work, I'll probably just factory reset it.
allsheneedewassome said:
I've sort of looked into the Odin method but I'm still slightly confused and a little reluctant do so without clear instructions. Do you know of a particularly good tutorial that could help me with this? I do want to retain some of the data.
Thank you for your help, if this doesn't work, I'll probably just factory reset it.
Click to expand...
Click to collapse
Its quite simple. Donwload your region firmware from sammobile or from the firmware thread, open odin 3.07 (later versions have issues). Don't change any settings but do make sure "repartition" is NOT checked as this may cause brick. Click on "pda". Select the firmware you just downloaded. Now boot phone into download mode, I believe its vol down home and power pressed altogether. Dismiss the warning and connect your phone. Finally once it says "added" press start. Thats it, good luck!
@non4 said:
Its quite simple. Donwload your region firmware from sammobile or from the firmware thread, open odin 3.07 (later versions have issues). Don't change any settings but do make sure "repartition" is NOT checked as this may cause brick. Click on "pda". Select the firmware you just downloaded. Now boot phone into download mode, I believe its vol down home and power pressed altogether. Dismiss the warning and connect your phone. Finally once it says "added" press start. Thats it, good luck!
Click to expand...
Click to collapse
This is correct.
Hey guys quick question before I download and attempt it, I have an Australian i9506 (Cat 4 LTE) but we don't have an official 5.0.1 firmware yet.
Can I just download the Nordic version from http://www.sammobile.com/firmwares/database/GT-I9506/ and install it, or would it brick my phone/radios not work?
Thanks
juzza87 said:
Hey guys quick question before I download and attempt it, I have an Australian i9506 (Cat 4 LTE) but we don't have an official 5.0.1 firmware yet.
Can I just download the Nordic version from http://www.sammobile.com/firmwares/database/GT-I9506/ and install it, or would it brick my phone/radios not work?
Thanks
Click to expand...
Click to collapse
Hi mate,
Yes you can !! it will not brick it , you may have (or not) problems with the modem as maybe is not the best for your region but you can always flash another...
should not be a problem
BACKUP first , nandroid and your EFS Folder, just in case there is a problem
Just to add to the previous suggestion, use Wanam's EFS Backup Tool rather than Samsung Tool, as it not only backs up the EFS partition but the hidden partitions where the IMEI and the modem are stored.
Strephon Alkhalikoi said:
Just to add to the previous suggestion, use Wanam's EFS Backup Tool rather than Samsung Tool, as it not only backs up the EFS partition but the hidden partitions where the IMEI and the modem are stored.
Click to expand...
Click to collapse
+1 mate!!
It also depends if your phone is carrier locked.
Thanks for the advice guys I'm giving it a try now, will edit as I go. My phone is not carrier locked (Voda AU don't lock them fortunately but they provide the codes on their website for free to unlock anyway).
So I downloaded Odin3 3.09 and the firmware I9506XXUDOA6_I9506NEEDOA6_NEE (this is the link from sammobile).
I'm following the instructions I found on another site but it's basically put the phone into download mode (home, power and volume down), agree to enter download mode, in Odin for AP select the .tar.md5, make sure Auto Reboot and F. Time Reset are ticked but not Re-Partition or anything else and start.
EDIT 1: The phone rebooted into recovery and updated something, now the phone is booting with a new boot animation. (for those referring to this I was on the latest AU Voda FW, then updated to CM12 5.0.2).
EDIT 2: After the usual nerve-wracking amount of time of first boot the boot logo finally went away and the usual "optimizing apps" message has come up and it's started (235 apps whoa the bloat). Waiting for that but at least it's working to a point where I can recover it. I just realised it's 6:10AM now and I FORGOT TO MAKE A BACK UP. I hope this works but worse case scenario there's a 4.4.2 Vodafone firmware I could flash and try my luck with if this doesn't work out.
EDIT 3: I'm not sure if it's part of the setup process but the word "UP" then a short progress bar appeared on the screen, now I've got only a black screen with a status bar (4G icon is there but no clock). I have rebooted from the power menu, let's see what's going on here.
EDIT 4: Cache wipe from stock recovery didn't work, trying factory reset from stock recovery. I note that the first time I set up the phone it was plugged into the computer with ODIN still running, I don't think it could have interfered but I unplugged the phone this time just in case.
EDIT 5: I'm not sure if it was ODIN or needing to do a factory reset but it's working now, I'm running through the set up. WiFi is working 100%.
Final EDIT: Everything is working 100%, tested the camera, proximity sensor, screen rotation, voice calls, mobile data, wifi and it's all 100%.
juzza87 said:
Thanks for the advice guys I'm giving it a try now, will edit as I go. My phone is not carrier locked (Voda AU don't lock them fortunately but they provide the codes on their website for free to unlock anyway).
So I downloaded Odin3 3.09 and the firmware I9506XXUDOA6_I9506NEEDOA6_NEE (this is the link from sammobile).
I'm following the instructions I found on another site but it's basically put the phone into download mode (home, power and volume down), agree to enter download mode, in Odin for AP select the .tar.md5, make sure Auto Reboot and F. Time Reset are ticked but not Re-Partition or anything else and start.
EDIT 1: The phone rebooted into recovery and updated something, now the phone is booting with a new boot animation. (for those referring to this I was on the latest AU Voda FW, then updated to CM12 5.0.2).
EDIT 2: After the usual nerve-wracking amount of time of first boot the boot logo finally went away and the usual "optimizing apps" message has come up and it's started (235 apps whoa the bloat). Waiting for that but at least it's working to a point where I can recover it. I just realised it's 6:10AM now and I FORGOT TO MAKE A BACK UP. I hope this works but worse case scenario there's a 4.4.2 Vodafone firmware I could flash and try my luck with if this doesn't work out.
EDIT 3: I'm not sure if it's part of the setup process but the word "UP" then a short progress bar appeared on the screen, now I've got only a black screen with a status bar (4G icon is there but no clock). I have rebooted from the power menu, let's see what's going on here.
EDIT 4: Cache wipe from stock recovery didn't work, trying factory reset from stock recovery. I note that the first time I set up the phone it was plugged into the computer with ODIN still running, I don't think it could have interfered but I unplugged the phone this time just in case.
Click to expand...
Click to collapse
Hi mate
How is it going?
If trouble , do a factory reset and flash it again....
Thanks mate that did the trick!
juzza87 said:
Thanks mate that did the trick!
Click to expand...
Click to collapse
glad to hear it mate, you did it!!
Thanks for let in us know.
For any other Aussies out there trying this I'm on day two and everything is working perfectly, getting root is super easy too, just use Odin to flash a custom recovery (Solk's CWM from May 2014 works great), boot into the recovery and install UPDATE-SuperSU-v2.45.zip, exit and when it asks if you want to repair root say yes. Reboot, go to the play store, update to the latest SuperSU and all is well.
Note 4 Stuck in Boot Loop - Help
I have a Note 4 SM-N910F, never been rooted, stock rom upgraded to 5.1.1 back in October, working fine until yesterday when it got stuck in a Boot loop.
Not sure what caused it but before it got stuck I was messing around with Google Photos which was running a bit slow.
Also I put it on the Qi Charger just before the loop started. It has an aftermarket Fone charger stuck to the battery. I’ve had this and the Qi Charger for 6mths with no problems before now.
It gets to the Samsung page waits a couple of seconds then boots again.
Here’s what I’ve tried - unsuccessfully - to fix the boot loop:
1: recovery mode.
I can get the little recovery text to appear in the top left but after a few seconds it boots again.
2: volume down, home
This gets me to the screen with up/down for continue/cancel.
This is the _only_ screen I can get to stay up without rebooting. It sits there waiting for input.
- Cancel, causes restart, of course, but back into the bootloop
3: Mashing on power button. Banging it, wiggling it, blowing on it.
I read somewhere this could cause a boot loop, but I doubt it is my case because
a. I’ve never had problems with the power button before
b: When I take out the battery and put it back in, it does NOT turn on. If I do the same holding the power button, it powers into the boot loop. So if the button were jammed on I would expect it to never remain off with the battery in.
3: flashing stock rom
I’m not 100% sure what build I had before. I know it was stock 5.1.1 OTA, and I’m pretty sure it was unlocked (my wife bought the phone and i inserted my old sim, but she may have bought it from my carrier and can’t remember)
So anyway I tried all three versions of TPH (unlocked) 5.1.1 from Sammobile.
Installed Odin 3.10.7 and flashed them.
It reboots to recovery but immediately boot loops again.
I doubt its to do with the version of the rom anyway since the symptoms are identical after flashing. Only now the boot loop always shows the little ‘recovery booting...’ text in the top left.
Here’s what I have NOT tried but am thinking about:
A: Re-partition option in Odin
B: Nand Erase All option in Odin
C: Buying a new battery.
On A/B: as far as I can tell what I have done so far should have left the data intact. I’m prepared to wipe all my data if it fixes my phone (no lectures about backups please!) and I’m tempted to do one of these on the off chance that the problem is caused by data or the “disk" problems.
But I don’t want to brick it. Can someone recommend how likely these are to help
And what they actually do?
(Please refrain from responses I see elsewhere like “this will brick your phone if you don’t know what you’re doing”. I don’t know what I’m doing, thats why I’m asking - just the facts please)
On C: the battery seems ok in that the power is solid even after not being plugged in for a long time, but since it was on the Qi Charger with that aftermarket thing stuck to it when it happened, I’m suspicious. Can any one say if this is a likely cause?
If so, it might be worth waiting till I get a new batter before doing A or B (can I wait days for Amazon!?)
[UPDATE] Got a new (genuine) battery at a local electronics store. No dice. Same problem, so it's not the battery. Shall I go ahead and re-partition.
[UPDATE] Got a PIT file from another forum, and flashed again with re-partition checked and PIT loaded. same results.
Is Nand-rease worth trying?
The phone is still under warranty so maybe I can return it.
But in that case I want to erase what's on it first.
thanks for any help
rhubarb
I don't think that the Samsung service center will accept cuz u have unofficiall custom
Simple Go to ur any nearby SOFTWARE ENGINEER may be he will help u out
Even I had the same problem with my NOTE 4 EDGE
Try downloading and flashing any "COJ5" build of 5.1.1 from sammobile. Samsung has recently issued a new update "COJ5" it basically locks down the bootloader and will not allow the device to run any previous builds.....Maybe your phone updated to COJ5 in the background and then it started messing around because the phone is rooted. Flashing "COJ5" will lock your bootloader and you will not be able to flash 4.4.4 or 5.0.2 but there is nothing to lose when your phone is already pretty much dead?.....ORRR if this is not a software issue then it could be related to hardware maybe the memory of your phone is done. I am not an expert on this but this is just an advice.....i have told you what will happen if u flash coj5 build now its up to you to decide. I would suggest you wait and wait if you are lucky to get a response from an expert and do what they say .......if not then give this a try!
**EDIT** another idea....First flash a custom recovery such as TWRP....see if it lets you boot into recovery and if it does then perform all sorts of formats.....and factory resets in there see if it works....if its still rebooting after format then flash the coj5 build of 5.1.1....note that you "MUST" format it with TWRP first and then check if its working because once you have coj5...it might not let you flash custom recoveries.
dork997 said:
Try downloading and flashing any "COJ5" build of 5.1.1 from sammobile. Samsung has recently issued a new update "COJ5" it basically locks down the bootloader and will not allow the device to run any previous builds.....Maybe your phone updated to COJ5 in the background and then it started messing around because the phone is rooted. Flashing "COJ5" will lock your bootloader and you will not be able to flash 4.4.4 or 5.0.2 but there is nothing to lose when your phone is already pretty much dead?.....ORRR if this is not a software issue then it could be related to hardware maybe the memory of your phone is done. I am not an expert on this but this is just an advice.....i have told you what will happen if u flash coj5 build now its up to you to decide. I would suggest you wait and wait if you are lucky to get a response from an expert and do what they say .......if not then give this a try!
**EDIT** another idea....First flash a custom recovery such as TWRP....see if it lets you boot into recovery and if it does then perform all sorts of formats.....and factory resets in there see if it works....if its still rebooting after format then flash the coj5 build of 5.1.1....note that you "MUST" format it with TWRP first and then check if its working because once you have coj5...it might not let you flash custom recoveries.
Click to expand...
Click to collapse
You can flash TWRP through ODIN while on COJ5 bootloader. It's locked but you still can flash recoveries and kernel and 5.1.1 ROMS
I am very interested in this thread. I have the EXACT same problem as you have after installing SimplRom, which was a ROM prior to COJ5. It could indeed be that our bootloaders are locked now?
I am using the N910F and just like you, installing any ROM/Custom Recovery/Bootloader/Kernel doesn't help. Perhaps installing a COJ5 ROM might help. I will give that a try, but I've recently used Kies to install the latest official firmware, but it didn't fix the issue.
I will report back here and we'll work on this together to make our phones work again!
Osama lakdawala said:
I don't think that the Samsung service center will accept cuz u have unofficiall custom
Simple Go to ur any nearby SOFTWARE ENGINEER may be he will help u out
Even I had the same problem with my NOTE 4 EDGE
Click to expand...
Click to collapse
Thanks but:
1: I have no custom rom. I have never had a custom rom on this device. I want to take it to Samsung, but want to clear the memory first. How can I do that?
2: I _am_ a software engineer_
dork997 said:
Try downloading and flashing any "COJ5" build of 5.1.1 from sammobile. Samsung has recently issued a new update "COJ5" it basically locks down the bootloader and will not allow the device to run any previous builds.....Maybe your phone updated to COJ5 in the background and then it started messing around because the phone is rooted. Flashing "COJ5" will lock your bootloader and you will not be able to flash 4.4.4 or 5.0.2 but there is nothing to lose when your phone is already pretty much dead?.....ORRR if this is not a software issue then it could be related to hardware maybe the memory of your phone is done. I am not an expert on this but this is just an advice.....i have told you what will happen if u flash coj5 build now its up to you to decide. I would suggest you wait and wait if you are lucky to get a response from an expert and do what they say .......if not then give this a try!
**EDIT** another idea....First flash a custom recovery such as TWRP....see if it lets you boot into recovery and if it does then perform all sorts of formats.....and factory resets in there see if it works....if its still rebooting after format then flash the coj5 build of 5.1.1....note that you "MUST" format it with TWRP first and then check if its working because once you have coj5...it might not let you flash custom recoveries.
Click to expand...
Click to collapse
Thanks to you and dork97 for the ideas. First some notes:
- I have never flashed a custom ROM, nor ROOTed this Note 4. The recent upgrade to 5.1.1 was official.
the first upgrade to 5.0.1 was automatic and after that I turned off automatic upgrades and upgraded to 5.1.1. manually. So I dont think it was an upgrade that caused it and it certainly was NOT a custom ROM or ROOT. I was doing nothing at all when the boot loop started.
- I'm not sure what ROM I had, but when I went looking for the available Portugal unlocked ROM, which _should_ be what I had, the latest were CJ03 (3, not 5) and before that CH03, CI03. Presumably I had one of those (my last update was October, so probably CH03).
I have tried all 3 of these, but the symptoms are the same.
I'm tempted to try the TWRP option - but would like some more details on what is and what it does, or what problem I might have that it would fix.
However I am probably still in time for a warranty repair - especially since I didnt actually do anything for this to happen. I would like to avoid losing that chance.
If I do take it in for warranty, I'd like to wipe the memory first though. How can I do that?
Finally can anyone actually tell me if the NAND ERASE is likely to help? How does flashing TWRP compare?
I get the feeling in fact, that I have a hardware problem. Especially given there were not software system changes around the time it happened, and given that it loops while trying to boot into recovery mode. In fact the only mode that doesnt constantly cycle is download mode. (Even holding the power button in dl mode does nothing which makes me suspect that, but pulling the battery out and replacing it leaves it off until I press the power button so perhaps not)
Thanks for the replies so far. Any more ideas, details?
roverrhubarb said:
I get the feeling in fact, that I have a hardware problem. Especially given there were not software system changes around the time it happened, and given that it loops while trying to boot into recovery mode. In fact the only mode that doesnt constantly cycle is download mode. (Even holding the power button in dl mode does nothing which makes me suspect that, but pulling the battery out and replacing it leaves it off until I press the power button so perhaps not)
Click to expand...
Click to collapse
I have the exact same as you. I did install a custom recovery (multiple) and still get the bootloop. From my tries yesterday, I indeed also suspect it may be a hardware issue. Perhaps to do with the battery/charging port. When I have my device unplugged and try to start in recovery/normalboot, it does not have a bootloop but simply turns off (and then doesn't respond until I pull the battery out). I think a NAND erase wouldn't do anything as I've personally tried that already.
Have you prior (upto a week) before you got the issues had your phone in a moist environment (bathroom while showering for example). I got my problems a week after I accidentally left my phone in the bathroom and installed custom ROM (which was done earlier and had no issues).
I've read online that it may have caused oxidation on the inside and may need some cleaning/drying with alcohol.
I still hold hope that we just have a software issue as download mode is working fine (apart from the Power off not working unless we pull out the battery).
Anybody have any experience with oxidation on their phone? Perhaps have had a similar bootloop due to hardware failure?
roverrhubarb said:
Thanks to you and dork97 for the ideas. First some notes:
- I have never flashed a custom ROM, nor ROOTed this Note 4. The recent upgrade to 5.1.1 was official.
the first upgrade to 5.0.1 was automatic and after that I turned off automatic upgrades and upgraded to 5.1.1. manually. So I dont think it was an upgrade that caused it and it certainly was NOT a custom ROM or ROOT. I was doing nothing at all when the boot loop started.
- I'm not sure what ROM I had, but when I went looking for the available Portugal unlocked ROM, which _should_ be what I had, the latest were CJ03 (3, not 5) and before that CH03, CI03. Presumably I had one of those (my last update was October, so probably CH03).
I have tried all 3 of these, but the symptoms are the same.
I'm tempted to try the TWRP option - but would like some more details on what is and what it does, or what problem I might have that it would fix.
However I am probably still in time for a warranty repair - especially since I didnt actually do anything for this to happen. I would like to avoid losing that chance.
If I do take it in for warranty, I'd like to wipe the memory first though. How can I do that?
Finally can anyone actually tell me if the NAND ERASE is likely to help? How does flashing TWRP compare?
I get the feeling in fact, that I have a hardware problem. Especially given there were not software system changes around the time it happened, and given that it loops while trying to boot into recovery mode. In fact the only mode that doesnt constantly cycle is download mode. (Even holding the power button in dl mode does nothing which makes me suspect that, but pulling the battery out and replacing it leaves it off until I press the power button so perhaps not)
Thanks for the replies so far. Any more ideas, details?
Click to expand...
Click to collapse
Well if you still have warranty then don't try anything on your own and go for the warranty repairs.
dork997 said:
Well if you still have warranty then don't try anything on your own and go for the warranty repairs.
Click to expand...
Click to collapse
thanks. How can I wipe personal data without voiding the warranty, using odin or kies? Given I canNOT get it into recovery mode, only download mode.
roverrhubarb said:
thanks. How can I wipe personal data without voiding the warranty, using odin or kies? Given I canNOT get it into recovery mode, only download mode.
Click to expand...
Click to collapse
Since you can get into download mode I'd flash firmware through ODIN again after verifying it's correct.
I'm seeing off the sammobile site for the 910F not all are the COJ5 locked bootloader.
Since you did update in Oct you may be on the COJ3. I'd try one of those and see if it works.
If it doesn't work and stops on the sboot.bin file then you have the COJ5
roverrhubarb said:
thanks. How can I wipe personal data without voiding the warranty, using odin or kies? Given I canNOT get it into recovery mode, only download mode.
Click to expand...
Click to collapse
i am sorry i don't know any way to remove personal data other than doing it via recovery. There is an option of "nand erase" in odin it is used while flashing firmware and it wipes everything on the phone but i have never used it (and also don't know whether it can help you or not) ... Senior members kindly help us with this.
Any update to your situation?
very interested as I am in the same situation as you are. Download mode works, recovery+normal boot not. No matter what ROMs/recoveries I install
Same issue I think
I am also in the same situation, although I can enter the recovery mode - home power and volume up - I have tried the wipe cache and then factory wipe to no avail - I have also entered download mode and flashed the stock recovery and even though Odin says pass, it is still in a boot loop. Also when I go to the download screen it has a line saying knox warranty void 0x1(4) does this mean I have voided the warranty even though I only used Odin to flash stock recovery?
Did anyone found a solution
Did anyone ever found a solution to this problem I'm having the exact same issue on a note 4 smn910a
I have a slightly different issue with my Note 4 SM-N910G, wherein am not able to start the phone at all, it is completely dead, if i put the cell phone on charge then also there is no LED on the top but if i connect the device to the PC it does make the connected sound on the PC but Odin is still not able to recognize the device neither kies. I tried draining the power by removing the battery, connected the device to PC without battery and then inserting it but the same problem. Please suggest me any resolution for this dead body am carrying from past few weeks.
hi Op,
did you find any solution for this issue?
Hello all. This is advice to use as a very last resort if you are experiencing the recovery bootloop issue AND you don't have the emmc failure bug. I had the recovery reboot, sudden shutdown with no warning, etc. issue for the past two weeks. I tried everything on Google and Youtube to fix my problem with no success. I flashed multiple stock ROMS and recovery tars (stock and TWRP) via ODIN, but nothing worked. Oddly enough, I never received the emmc error that I have read about. Also, in the few times that my phone booted normally, I even loaded the Wakelock Power Manager app, set it to partial wakelock and my phone STILL continued to bootloop. As a last resort, I bought a new battery, but the reboot problems continued in Android 4.4.4 Kitkat, 6.0 Marshmallow, 7.1 Nougat and 8.1 Oreo ROMS. Well, here is what finally helped me to get my phone back operational. I had a backup ROM from a previous install and a TWRP flashable version of the same ROM on my SD card (in case the phone did not stay on for the full restore). I put the phone into a ziplock bag into a freezer for about 20 min. (thankfully this time TWRP stayed on long enough for me to do the following):
1) copy all the files I wanted to save from internal storage to a computer.
2) performed a full wipe (Dalvic, Cache, System, etc. Like when flashing a ROM, but this time also internal storage. Note: Please do not wipe both internal and SD card, as you may have a difficult time trying to load the ROM file back on the sd card (assuming you don't have a card reader).
3) After wiping, I was able to restore my stock ROM backup (or you can just flash the stock ROM).
I can't be 100% sure, but I think my wiping internal and then flashing the stock ROM finally did the trick. Since this morning, the phone has been pretty much back to as it was before. In either case, I'm sharing this with the hope that it helps someone else.
Sent from my SM-N910T using Tapatalk
Hi! I recently formated my galaxy note 4 n910f becuse it had some problems and now i cant restore my back up or flash the stock rom from sammobiles . odin process is completed with success but i am getting failed to mount efs,cache, data,system etc plus device doesnt have DRK. I am a noob with all that but i didnt had any kind problems like that at the past years. i tried restore my backup no luck , flash the latest firmware no luck either and the original lollipop firmware but nothing . everytime its completed then it goes to recovery bootting then it says installing and at the 1/3 of the bar it says erasing and then it goes either to a bootloop or it crashes (blank screen). if i flash twrp at the backup section is empty also..i dont know what to do . i tried so many things but i coudnt find any solution and samsung service didnt even checked the phone when i gave it to them and told them what happend. they told me that i need to chnage motherboard and it will cost 315 euros. ANY IDEAS?
Messinis said:
Hi! I recently formated my galaxy note 4 n910f becuse it had some problems and now i cant restore my back up or flash the stock rom from sammobiles . odin process is completed with success but i am getting failed to mount efs,cache, data,system etc plus device doesnt have DRK. I am a noob with all that but i didnt had any kind problems like that at the past years. i tried restore my backup no luck , flash the latest firmware no luck either and the original lollipop firmware but nothing . everytime its completed then it goes to recovery bootting then it says installing and at the 1/3 of the bar it says erasing and then it goes either to a bootloop or it crashes (blank screen). if i flash twrp at the backup section is empty also..i dont know what to do . i tried so many things but i coudnt find any solution and samsung service didnt even checked the phone when i gave it to them and told them what happend. they told me that i need to chnage motherboard and it will cost 315 euros. ANY IDEAS?
Click to expand...
Click to collapse
Did you tried to do factory reset from stock recovery after flashing ?
Trex888 said:
Did you tried to do factory reset from stock recovery after flashing ?
Click to expand...
Click to collapse
thanks for responding! yep i did it but then when i reboot it it showed me a ton of fails. the weird thing is even with my micro usb flash drive during the procress of flashing a custo rom or my stock backup the phone crashes. it doesnt show me any error ...
Hey,
Need some help. My brand new AT&T S8 Active arrived yesterday. Since I am located outside the US I'm stuck with utilising Odin to update the software.
The current version listed on the AT&T website was 5CSK1 and I was able to track down the update:
https://forum.xda-developers.com/showpost.php?p=81251867&postcount=743
It installed successfully, everything is going well however I am unable turn on NFC. The toggle found in the settings menu is off and when I attempt to switch it on it greys out for a few seconds then the 'NFC keeps stopping' error appears on the bottom of the screen.
I've cleared the cache/data for the NFC app - no luck,
I've performed a factory reset via recovery menu - no luck.
I've installed the previous build 5CSJ3 from: https://forum.xda-developers.com/showpost.php?p=80903399&postcount=187 with a factory reset straight after - no luck.
I'm currently back on the latest K1 build.
Logcat shows errors with 'libnfc_nci' and a 'Fatal Exception' for the 'com.android.nfc' process. And to top it all off the NFC app is draining my battery.
If anyone can help me that would be awesome.
dchalkley said:
Hey,
Need some help. My brand new AT&T S8 Active arrived yesterday. Since I am located outside the US I'm stuck with utilising Odin to update the software.
The current version listed on the AT&T website was 5CSK1 and I was able to track down the update:
https://forum.xda-developers.com/showpost.php?p=81251867&postcount=743
It installed successfully, everything is going well however I am unable turn on NFC. The toggle found in the settings menu is off and when I attempt to switch it on it greys out for a few seconds then the 'NFC keeps stopping' error appears on the bottom of the screen.
I've cleared the cache/data for the NFC app - no luck,
I've performed a factory reset via recovery menu - no luck.
I've installed the previous build 5CSJ3 from: https://forum.xda-developers.com/showpost.php?p=80903399&postcount=187 with a factory reset straight after - no luck.
I'm currently back on the latest K1 build.
Logcat shows errors with 'libnfc_nci' and a 'Fatal Exception' for the 'com.android.nfc' process. And to top it all off the NFC app is draining my battery.
If anyone can help me that would be awesome.
Click to expand...
Click to collapse
ugh, the active line... there hasnt ever been much support for those. All you can really do is keep flashing the stock firmware and hope that the errors resolve themselves.
Side note: have you noticed how they stopped making the active phones? They were a dismal failure. All they are is the regular phone in a case that you cant take off :/
dchalkley said:
Hey,
Need some help. My brand new AT&T S8 Active arrived yesterday. Since I am located outside the US I'm stuck with utilising Odin to update the software.
The current version listed on the AT&T website was 5CSK1 and I was able to track down the update:
https://forum.xda-developers.com/showpost.php?p=81251867&postcount=743
It installed successfully, everything is going well however I am unable turn on NFC. The toggle found in the settings menu is off and when I attempt to switch it on it greys out for a few seconds then the 'NFC keeps stopping' error appears on the bottom of the screen.
I've cleared the cache/data for the NFC app - no luck,
I've performed a factory reset via recovery menu - no luck.
I've installed the previous build 5CSJ3 from: https://forum.xda-developers.com/showpost.php?p=80903399&postcount=187 with a factory reset straight after - no luck.
I'm currently back on the latest K1 build.
Logcat shows errors with 'libnfc_nci' and a 'Fatal Exception' for the 'com.android.nfc' process. And to top it all off the NFC app is draining my battery.
If anyone can help me that would be awesome.
Click to expand...
Click to collapse
Might try redownloading a different firmware from a differ location. I had this issue on a lg back in the day the camera wouldnt work no matter what I always restored stock with one firm I had. And it ended up being a bad download. Another possibility is a bad NFC chip. If it's new I'd have it warranted
Thankyou, Thankyou Youdoofus and TheMadScientist for your advice.
Woke up early today (3am) with coffee in hand I tried again downloading the K1 and J3 builds; neither worked.
Unfortunately there's no alternative download for them... Google points to the XDA forums which seem to come from some Russian forum.
I've gone to an earlier build - 5CSI3 - https://forum.xda-developers.com/showpost.php?p=80505887&postcount=186 which works.
So it's not a NFC chip issue, yay. Now, just need to figure out what I'll do when the next update hits at the end of this month.
dchalkley said:
Thankyou, Thankyou Youdoofus and TheMadScientist for your advice.
Woke up early today (3am) with coffee in hand I tried again downloading the K1 and J3 builds; neither worked.
Unfortunately there's no alternative download for them... Google points to the XDA forums which seem to come from some Russian forum.
I've gone to an earlier build - 5CSI3 - https://forum.xda-developers.com/showpost.php?p=80505887&postcount=186 which works.
So it's not a NFC chip issue, yay. Now, just need to figure out what I'll do when the next update hits at the end of this month.
Click to expand...
Click to collapse
Make sure your using the latest odin build 3.13. I dont have an active. **** I read it wrong so it does work on other builds?
TheMadScientist said:
Make sure your using the latest odin build 3.13. I dont have an active. **** I read it wrong so it does work on other builds?
Click to expand...
Click to collapse
Yeah, it's working on the 5CSI3 build from October 2019, there's been two recent updates since then (and another will come at the end of the month). I don't know what's happening as no one else has reported this issue .
Just wanting to be on the most recent version for security and the annoyance of having data wiped every update.
Edit: Yeah, Odin v3.13.1 . No errors being displayed, all green.
This issue is very likely to be caused by 3rd party sim unlock or FRP removal and meddling with knox.
I have been trying to get around this problem and it seems it is either a security measure to disable nfc payments on triggering knoxguard or problem with modem.
this problem started after CSJ3 update afaik and only on some phones, if someone can explain this would be great.
Solution:
You will lose all data so backup is recommended
Remove your SIM card, re-install the firmware with ODIN and check Nand Erase auto reboot and F. reset time
Check your KG status(checking or prenormal) on the bootloader, and in settings>device care you will see Security is disabled and it crashes when you click it.
I also noticed the settings menu is weird with many broken options and dailer codes dont work anymore.
EDIT: Workaround Solution:
THIS IS FOR G892A ONLY who have problem with NFC after updating to builds after December 2019
Disclaimer: do at your own risk and can break your phone signal or system detected as rooted/custom
note: you will lose all data, ONLY check "Auto Reboot" and "F. Reset Time" in odin
1) Backup your data
2) Delete your google account, so FRP : OFF in bootloader (this can cause problems if not done)
3) Flash 5 firmware files G892AUCS5CTC1 (latest rom with march 2020 security) and get back to bootloader
4) Flash 3 files from G892AUCS5CSI3 : BL, CP and CSC
(odin will say PASS, but recovery will give error)
5) select wipe data partition then reboot to system
when the phone starts you will see NFC logo in statusbar means you are successful
if you get errors while using odin: flash combination file : G892AUCU5ASD1 if this doesnt work it means you have different problem (cable, socket, pc, bad chip)
i tried flashing CP file only and phone booted into UPLOAD mode, so dont panic if you get into UPLOAD mode just reboot with 3 buttons to recovery and start over
Vcek said:
This issue is very likely to be caused by 3rd party sim unlock or FRP removal and meddling with knox.
I have been trying to get around this problem and it seems it is either a security measure to disable nfc payments on triggering knoxguard or problem with modem.
this problem started after CSJ3 update afaik and only on some phones, if someone can explain this would be great.
Solution:
You will lose all data so backup is recommended
Remove your SIM card, re-install the firmware with ODIN and check Nand Erase auto reboot and F. reset time
Check your KG status(checking or prenormal) on the bootloader, and in settings>device care you will see Security is disabled and it crashes when you click it.
I also noticed the settings menu is weird with many broken options and dailer codes dont work anymore.
EDIT: Workaround Solution:
THIS IS FOR G892A ONLY who have problem with NFC after updating to builds after December 2019
Disclaimer: do at your own risk and can break your phone signal or system detected as rooted/custom
note: you will lose all data, ONLY check "Auto Reboot" and "F. Reset Time" in odin
1) Backup your data
2) Delete your google account, so FRP : OFF in bootloader (this can cause problems if not done)
3) Flash 5 firmware files G892AUCS5CTC1 (latest rom with march 2020 security) and get back to bootloader
4) Flash 3 files from G892AUCS5CSI3 : BL, CP and CSC
(odin will say PASS, but recovery will give error)
5) select wipe data partition then reboot to system
when the phone starts you will see NFC logo in statusbar means you are successful
if you get errors while using odin: flash combination file : G892AUCU5ASD1 if this doesnt work it means you have different problem (cable, socket, pc, bad chip)
i tried flashing CP file only and phone booted into UPLOAD mode, so dont panic if you get into UPLOAD mode just reboot with 3 buttons to recovery and start over
Click to expand...
Click to collapse
Hello There!..kind of new about this so..long story short..
Phone had Android 8, and I really love Night mode on Android 9, so...I've found BL, AP, CP, CSC, USER Data ROM for GALAXY S8 ACTIVE AT&T Unlocked, however..I am a little bit afraid of any NAND Erase.
I am not an expert, but I can tell you are. By any chance do you have any vide or graphic tutorial abot how you can perform these actions? It is very odd that I am unable to have any *# codes working, and lately, I've received this odd message about NFC Service has stopped, so...any graphic step by step guide will be highly appreciated it.
I've tried ....soft reset, then factory reset, then flash again ODIN (BL, AP,CP, CSC and USER DATA ) But I have no idea how to back up my data, and it will be very helpful to have G892AUCS5CSI3 as well.
Thank you very much for your time, I hope you can help me and I appreciate very much your time.
The one that I have is AP_G892AUCS5CTC1_CL16888298_QB29841048_REV00_user_low_ship_MULTI_CERT_meta_OS9.tar
BL_G892AUCS5CTC1_CL16888298_QB29841048_REV00_user_low_ship_MULTI_CERT.tar
CP_G892AUCS5CTC1_CP15398738_CL16888298_QB29841048_REV00_user_low_ship_MULTI_CERT.tar
CSC_ATT_G892AATT5CTC1_CL16888298_QB29841048_REV00_user_low_ship_MULTI_CERT.tar
USERDATA_G892AUCS5CTC1_CL16888298_QB29841048_REV00_user_low_ship_MULTI_CERT.tar
SOLVED!
So...I've followed the steps to install only BL, CP and CSC using G892AUCS5CSI3...however, the system started as usual, and actually did not work =(
RESOLUTION:
INSTALL THE FULL G892AUCS5CSI3. Worked as magic =)
thank you for the thread!!
moncd6 said:
Hello There!..kind of new about this so..long story short..
Phone had Android 8, and I really love Night mode on Android 9, so...I've found BL, AP, CP, CSC, USER Data ROM for GALAXY S8 ACTIVE AT&T Unlocked, however..I am a little bit afraid of any NAND Erase.
I am not an expert, but I can tell you are. By any chance do you have any vide or graphic tutorial abot how you can perform these actions? It is very odd that I am unable to have any *# codes working, and lately, I've received this odd message about NFC Service has stopped, so...any graphic step by step guide will be highly appreciated it.
I've tried ....soft reset, then factory reset, then flash again ODIN (BL, AP,CP, CSC and USER DATA ) But I have no idea how to back up my data, and it will be very helpful to have G892AUCS5CSI3 as well.
Thank you very much for your time, I hope you can help me and I appreciate very much your time.
The one that I have is AP_G892AUCS5CTC1_CL16888298_QB29841048_REV00_user_low_ship_MULTI_CERT_meta_OS9.tar
BL_G892AUCS5CTC1_CL16888298_QB29841048_REV00_user_low_ship_MULTI_CERT.tar
CP_G892AUCS5CTC1_CP15398738_CL16888298_QB29841048_REV00_user_low_ship_MULTI_CERT.tar
CSC_ATT_G892AATT5CTC1_CL16888298_QB29841048_REV00_user_low_ship_MULTI_CERT.tar
USERDATA_G892AUCS5CTC1_CL16888298_QB29841048_REV00_user_low_ship_MULTI_CERT.tar
Click to expand...
Click to collapse
You can backup your data with Samsung backup and restore to Samsung cloud or to your PC with Samsung's Smart Switch app.
As for tutorial I'll try to make one with images for the latest ROM G892AUCU5CTF4 dated 20-Aug-2020 with August security patch. I'll upload it later as I still have to backup my phone before updating.
Thanks!
Thank you so much!
Is it G892AUCU5CTF4 a estable versión for S8 Active? Or does it has any other bugs? I had to "downgrade" and now things are pretty cool, however, I would love to have the newest version. Thank you!
moncd6 said:
Thank you so much!
Is it G892AUCU5CTF4 a estable versión for S8 Active? Or does it has any other bugs? I had to "downgrade" and now things are pretty cool, however, I would love to have the newest version. Thank you!
Click to expand...
Click to collapse
It doesn't have any bugs but some people have issue with flashing new builds, if you have this issue just install CSI3 build or earlier
dchalkley said:
It installed successfully, everything is going well however I am unable turn on NFC. The toggle found in the settings menu is off and when I attempt to switch it on it greys out for a few seconds then the 'NFC keeps stopping' error appears on the bottom of the screen.
I've cleared the cache/data for the NFC app - no luck,
I've performed a factory reset via recovery menu - no luck.
I've installed the previous build 5CSJ3 from: https://forum.xda-developers.com/showpost.php?p=80903399&postcount=187 with a factory reset straight after - no luck.
... And to top it all off the NFC app is draining my battery.
Click to expand...
Click to collapse
Same. I also tried CTA2 and CTL1. Everything after CSI3 has NFC crashing and excessive battery drain. I've tried multiple flashes on multiple phones.
dchalkley said:
I tried again downloading the K1 and J3 builds; neither worked.
Unfortunately there's no alternative download for them... Google points to the XDA forums which seem to come from some Russian forum.
I've gone to an earlier build - 5CSI3 - https://forum.xda-developers.com/showpost.php?p=80505887&postcount=186 which works.
So it's not a NFC chip issue, yay. Now, just need to figure out what I'll do when the next update hits at the end of this month.
Click to expand...
Click to collapse
Same.
dchalkley said:
I don't know what's happening as no one else has reported this issue .
Edit: Yeah, Odin v3.13.1 . No errors being displayed, all green.
Click to expand...
Click to collapse
Same here. I used Odin 3.14.1, though.
Vcek said:
Solution:
You will lose all data so backup is recommended
Remove your SIM card, re-install the firmware with ODIN and check Nand Erase auto reboot and F. reset time
Click to expand...
Click to collapse
This did not work for me, not even with "Nand Erase" checked.
moncd6 said:
It is very odd that I am unable to have any *# codes working, and lately, I've received this odd message about NFC Service has stopped, so...
Click to expand...
Click to collapse
Same. The problem of the secret dialer codes not working parallels the NFC problem for me; that is to say that it doesn't work on any firmware after CSI3.
moncd6 said:
SOLVED!
So...I've followed the steps to install only BL, CP and CSC using G892AUCS5CSI3...however, the system started as usual, and actually did not work =(
RESOLUTION:
INSTALL THE FULL G892AUCS5CSI3. Worked as magic =)
thank you for the thread!!
Click to expand...
Click to collapse
Can you please upload G892AUCS5CSI3? it's all dead links i got
rerenz said:
Can you please upload G892AUCS5CSI3? it's all dead links i got
Click to expand...
Click to collapse
Same. I'm not sure where I originally got it from, but here's a reupload from my archives. I created a list of MD5 checksums if you care to check the five files for corruption.
voidxor said:
Same. I'm not sure where I originally got it from, but here's a reupload from my archives. I created a list of MD5 checksums if you care to check the five files for corruption.
Click to expand...
Click to collapse
Finally, it works! My NFC is back. Thanks, pal.