Not sure about you.
But i find my self always sticking my finger right into the camera lense, and it's always hard to keep clean
specially when you are eating with your hands then you do something on the phone and that oily residue is hard to get out without a good wipe.
the problem is i find i spend a lot of time trying to clean it.
So i was wondering if anyone got a good idea to put some sort of screen protector for the camera lense
i was thinking probably i'll cut a small piece of the screen protector and put it on top, since i got many to spare
also i got a few very nice one with mirror coating
problem is... not sure if the mirror coating ones will make the picture less sharp as it reflects back the light
right now the camera is taking very nice a vivid pictures as well as recording, and i wouldn't want a screen/lense protector to cut down the resolution & light input when taking pictures and making videos
specially for night mode photo shots
Food fingers will also be an issue with a screen protector. Unless you use a anti glare one which will most likely degrade the image. You best bet is a case or backing that recesses the camera preventing you from touching it.
it's really hard to avoid touching the camera, and you're right, a screen protector might deteriorate the image quality.
what i've been doing, same with phones i've previously had, is carry a small piece of micro fibre cloth in my wallet. that way, i can make sure my lense is clean.
aridoasis said:
it's really hard to avoid touching the camera, and you're right, a screen protector might deteriorate the image quality.
what i've been doing, same with phones i've previously had, is carry a small piece of micro fibre cloth in my wallet. that way, i can make sure my lense is clean.
Click to expand...
Click to collapse
i do have that, problem is, oily residue is hard to remove with the micro fibre cloth
it just smudges it around, the only way to take it out is to go to the washroom get a tiny bit of soap (or wet cloth tissue, like the ones you can get from KFC) and clean it with the micro fibre cloth
I never took the protector off that comes with the phone.
It was quite funny. The screen protector I bought came with a protector for the camera lens but no matter what I couldn't get it on.... I discovered that the camera came with a protector already on it, lol.
this would probably be your best bet. it's an oleophobic (supposedly oil repelling) screen protector that includes 3 extra pieces for the camera lense as well.
http://www.sgpstore.com/product_info.php/products_id/1497
Sent from my GT-I9000 using XDA App
Just use your thumb.
1. Don't eat greasy food, it's bad for you--bad for your smartphone, too.
2. Use a fork instead of your fingers.
3. Barring those smart-alecky suggestions , perhaps there's an opportunity for someone to develop a sexy after-market back for the SGS--one which makes for easier battery changing and has a sliding window over the camera lens. Does something like that already exist?
If you get a Martin Fields screen protector it usually comes with a additional cut out protector for the camera lens. It's pricey though, but the film is good quality and you don't get any bubbles.
Sent from my GT-I9000 using XDA App
Related
Does anyone know how to remove small scratches from our screen?
I made a very small scratch accidentally while I was removing the paint covering the ffc hole.
Also does anyone know exactly what type of black paint t-mobile used to paint the hole? If we can figure the color out anyone who needs to send their phone in for repairs can just paint it again and remove the camera.
Sooooo any thoughts?
nothing huh.. x.x
since the glass is actually a ceramic, I'd say you're going to be hard pressed to remove a scratch. I'm not sure though, but you might try a clear acrylic to fill the scratch. I don't know on the other part.
Clear acrylic won't fix the scratch because acrylic has a different refractive index than glass.
Your only options are to either polish the scratch (not likely), or learn to live with it.
There might be glass repair products out there, but I don't know of any
gotya, thanks.. do you believe it will make a big impact once i get the camera installed? like ruin the image.
you can try dry mustard and vinegar mixed together, apply and buff (attach a q-tip to a dremel)...
MichaelB91 said:
gotya, thanks.. do you believe it will make a big impact once i get the camera installed? like ruin the image.
Click to expand...
Click to collapse
Doubtful, the scratch is going to be so close to the low resolution lens that I think you won't even be able to tell.
thanks you
Removing glass scratches
Removing glass scratches are tricky. I posted before how to polish plastic. The same is true with glass only there are no solvents that degrade glass so no worries there (couple of acids do but you can't buy).
Here is what you need to do :
1. Mask off EVERYTHING you do not want touched
2. then you can use a dremel with a small buffing wheel or puff ball (you can get @ home depot or Lowes... etc
3. I would use fine polishing compound and then High gloss compound (you can get from an auto body shop (the same for buffing out a newly painted car)
4. Be VERY careful not to heat up the surface or you can crack the glass.
Finally, this will take awhile (maybe as long as an hour) and if the scratch is deep it will warp the surface and make some of the display deformed looking so look at it carefully and decide if this is worth the effort.
The other crap on the market that are fillers, really do not work for small scratches like this. they are designed for larger blemishes, so the chances of these staying in place are slim to never
hope that helps
Not sure what kind of paint was originally over the camera opening but I imagine nail polish would be an effective (and cheap) substitute. With an amount so small would someone notice the difference?
I'm just going to wait and see if the camera can see clearly through it, and ill decide what do to after that.
Thank you (everyone) for all the help. I really appreciate it
Has anyone else noticed that the recessed lens for the Aria camera attracts lint from your pocket, and you really can't easily clean that lint off without something like a Q-tip?
Seems like it'd be simple enough to have some kind of stick on film cover that you could clean externally without any tool such as a Q-tip. With lint in there, the camera is pretty much useless. With a clean lens, the camera works great.
Can anyone suggest a good solution to this problem?
I have noticed the exact same thing you are mentioning. I wish they would have done something better with the design but oh well! Don't have any good solutions but will monitor this thread to see what others do.
Rip the tip off a qtip and use it like that dry worked perfect for my camera
Sent from my Liberty using XDA App
I think the idea was probably to keep fingerprints off.. that part works perfectly. I just twist the corner of a kleenex/papertowel/napkin and stick it in there & turn it
Don't use a twisted napkin/etc... good way to get scratches. Now, I know our Aria isn't like a Nikon DSLR... but still, a scratched lense will kill any photos you take.
Get something like a lens pen or an air cleaning blower. They're fairly cheap, and can be used with multiple devices... not just your Aria!
Edit: Another item you can use - for all the guys out there with electric shavers - the little brushes that come with your shaver to clean the heads/etc can also be used to clean out the camera for the Aria. (I noticed one on my desk and wanted to add to this.)
Duplicate post........
Put black tape over the cam grill and pull off when using the camera. Like a manual shutter haha.
Sent from my Liberty using XDA App
OK obviously you can just clean it by jamming something in there or carry around a lens cleaning pen or whatever, that's not the point. The point is to come up with a solution that is not such a pain to clean it. My wife & daughter both have iPhones and they just take them out of their pocket and shoot a picture. If I'm going to have to clean the danged lens with a q-tip or a lens cleaning cloth or whatever EVERY TIME I USE IT then the camera is pretty much totally useless on this phone.
A clear plastic cover would work brilliantly. The reason this collects lint is because the lens is down in a hole. It wouldn't collect lint if there was a lens surface flush with the exterior of the phone. Also a lens surface level with the exterior of the phone would be very easy to wipe off with your shirt tail or whatever if it had a fingerprint on it. But the lint is guaranteed to be there if you put your phone in your pocket as it is and it's a royal pain to get it clean.
mr72 said:
OK obviously you can just clean it by jamming something in there or carry around a lens cleaning pen or whatever, that's not the point. The point is to come up with a solution that is not such a pain to clean it. My wife & daughter both have iPhones and they just take them out of their pocket and shoot a picture. If I'm going to have to clean the danged lens with a q-tip or a lens cleaning cloth or whatever EVERY TIME I USE IT then the camera is pretty much totally useless on this phone.
A clear plastic cover would work brilliantly. The reason this collects lint is because the lens is down in a hole. It wouldn't collect lint if there was a lens surface flush with the exterior of the phone. Also a lens surface level with the exterior of the phone would be very easy to wipe off with your shirt tail or whatever if it had a fingerprint on it. But the lint is guaranteed to be there if you put your phone in your pocket as it is and it's a royal pain to get it clean.
Click to expand...
Click to collapse
eh not quite that easy of a solution. HTC Tilt 2 had a plastic cover flush with the backcover of the phone to cover and protect the recessed camera lens. it still managed to take horrible shots with it...because the plastic cover was prone to getting tiny scratches almost impossible to see, but picked up by the camera lens. removing the cover made pictures FAR clearer and better.
unless they start making gorrilla glass to cover and protect the camera lens..we're stuck with wipe and shoot.
So here's one of the few pet peeves I have about the Aria. The camera lens is recessed in the case, and it collects dust. My mother has the same phone (got hers a year before me), and she always complained that the pictures were not sharp. I looked at the phone, and the lens had picked up a significant amount of lint and dust from being in her pocket. Is there any way to prevent this? Perhaps a case that covers that area with a clear panel? I might just slap a bit of screen protector over the area. Of course, it's easy to clean it off with a qtip, but i'd rather avoid the problem alltogether.
Get a microfiber cloth and place it over the camera hole, then get a pencil and use the tip to push on the hole and clear the lense
Signatures are fancy.
Qtips work for me.they fit perfect.
As far as prevention goes ,I have no clue.seems like you would have distortion from a piece of screen protector or similar. Give it a try who knows.
Sent from my Liberty using XDA App
GregTheDiver said:
So here's one of the few pet peeves I have about the Aria. The camera lens is recessed in the case, and it collects dust. My mother has the same phone (got hers a year before me), and she always complained that the pictures were not sharp. I looked at the phone, and the lens had picked up a significant amount of lint and dust from being in her pocket. Is there any way to prevent this? Perhaps a case that covers that area with a clear panel? I might just slap a bit of screen protector over the area. Of course, it's easy to clean it off with a qtip, but i'd rather avoid the problem alltogether.
Click to expand...
Click to collapse
One of my very few peeves with this phone. The only practical remedy I've found for it is to get a holster for the phone. Its still convenient for spur of the moment pics and its safer than your pocket anyways. Also, I work in construction and it gets really bad with dust and dirt at work so what I do is I have a piece of duct tape stuck to the inside back of a silicone case I only use for work. I don't use the camera or speaker at work so it works.
Sent from my cm7 Aria.
This is also my only issue with the phone. I usually use a Q-Tip, but that's if I'm at home really. On the road all of my pictures have a "haze" to them.
The same problem here. I need to keep cleaning the lens out with a bud or microfiber cloth. Pictures get all hazy otherwise.
That and the speaker crackles at max volume.. my only two complaints about this lovely device.
Same boat here. The speaker crackling is most annoying. I use a Q-tip for the lens.
Q-tip. Works great. You can also flip the silicone case to cover the lens and switch it when you need to.
Sent from my Liberty using XDA App
yea the speakers arent the best. I work at a sheet metal fab shop, so alway's getting lazer dust around the speaker, and it does crackle at high volume,
you can pick up replacement speakers for about $14.99
Code:
http://www.repairsuniverse.com/htc-aria-screen-replacement-and-parts.html
got my screen from there. quality parts.
yea there really isnt anything that can PREVENT dust from the camera screen. just keep some q tips in your car ( thats what i do there cheap enough ) and some cleaning solution. ive found that my wifes eye contact solution works good with a qtip.
find maybe a snap on case, or something, that helps keep it out of your pockets.
Try this
I have made some little foam stoppers to push into the hole to keep the dust out. I took a thin (about 1/4") sheet of foam that was used as packing for electronic components, and then used a one hole paper punch to punch out the stoppers. They stay in pretty well, but they're kind of hard to get back out. I can remove it with my fingernail, but not very quickly. Those with long nails might fair better.
Hello all!
First time posting in a while, so forgive me if I'm a bit rusty. I just got my Samsung Galaxy Note 10+ yesterday, and my amFilm Ultra Glass Screen Protector today, so I thought I'd write up a little review. Sorry for no pics, but I was busy installing and trying to keep things dust-free
I've used Whitestone in the past but was disappointed with both my Note 8 and 9 installs, primarily because of the LOCA spiderwebbing on the edges. I figured I'd give another brand a shot, so I went searching here and found the amFilm Ultra Glass Screen Protector. A quick trip over to Amazon, and $40 later (for a full kit including *2* protectors) and here we are!
PACKAGING: The box is nice - wider and flatter than the WS product. It's clean and simple, but professional looking. Plus their website and install video are well done also. Inside the outer box are three smaller boxes. The largest contains the plastic frame, screen protectors, and wipes (I think). The medium size box contains the UV light and the MicroUSB cable. It appears to be identical to the WS product, but I don't know this for a fact, so take that for what it's worth. The smallest box contains the LOCA (2 tubes), extra absorption pads, plastic pin, tabs to place over the speaker, a bubble level, and a weight. Everything you need comes in this kit, including plenty of wet and dry wipes, microfiber cloths, and dust removal stickers. On the packaging is a QR code to go to the install video.
PRODUCT: Everything seems to be on the same quality scale as the WS product, with a few minor changes - 1) there is no LOCA applicator "bridge", you have to aim and dribble the solution by hand, 2) the pin is different - there's no more tilting the entire phone to move the liquid into position - the pin is angled and sets the glass down at an angle, and 3) the "fingerprint" weight (more on this later). Otherwise, if you've done the WS before, this isn't significantly different.
INSTALLATION: **REMINDER** REMOVE the factory plastic screen protector and clean your screen THOROUGHLY before proceeding! I ALMOST forgot, which would have been a disaster! I watched the video twice and didn't see any mention of this, so amFilm, here's a tip for you. Anyway, installation is straightforward -put the little feet on the bottom of the phone to bring it flush with the pins inside, make sure the screen is 100% clean, install the sticker over the speaker, apply the liquid (making sure to absorb any "splatter" before proceeding!), peel the protective film off the glass, place it, and pull the pin. Once the liquid starts to spread, put the weight where the fingerprint sensor is and let it settle and "ooze" for 3-ish minutes. (NOTE - it's hard to locate the fingerprint scanner, so you might want to mark the frame in advance with a Sharpie (another tip for amFilm - marking that plastic with some kind of raised bumps or hash marks might be a good idea, or maybe a film for on top of the glass that marks where to place it - just a thought). After that, it's bake-time under the UV light, then you're done.
RESULTS: I'm very impressed so far. The glass appears to be nice and clear, and I can't even see the little "spots" in the corners others mentioned. I lucked out this time and no dust specs at all. No bubbles, etc. the fingerprint scanner appears to be working fine, although I haven't re-registered anything. It DOES require a little extra "umph" to scan, but that's not a big deal. Part of that could be me getting used to an in-screen scanner. There was minimal over-oozing, and the pre-installed pads absorbed everything fine. Barely needed a wipedown afterward.
FITMENT: There appears to be no flaws in placement using the guide, or in the fitment of the glass. It sits flat, and lines up exactly where it should. The cutout for the front-facing camera is exactly where it should be, and it's not overly-exaggerated in size. The edges leave plenty of room for putting the phone in a case (I've tried 4 so far, all fit without touching the glass edge, so there's no worry about case push on the glue). The bottom edge is just a tad bit short, maybe a 1/16", but that could be allowing for larger cases (I don't use the big bulky ones, so IDK).
OVERALL ASSESSMENT: 4.5/5 Stars - Great product, especially for the price. I'll keep you posted on long-term wear & quality, but for now, I'd say it's a great deal versus the competition.
Great review. I just installed mine yesterday and I've had exactly the same great experience with the product. It really does work well with the fp scanner. I had a terrible time with the S10 plus fp scanner and the Whitestone. Great price as well. I'll buy again for sure.
Mine note come with preinstalled glass protector
fazi78 said:
Mine note come with preinstalled glass protector
Click to expand...
Click to collapse
So did everyone's. There's three or four threads about it already. And that's why the OP said to make sure to removed the factory installed screen protector.
Will this work with the samsung clearview cover ?
and can this protector be easily removed?
thanks
I just picked up a set of the amfilm install went flawless a lot easier than the whitestone I had on my S8 fingerprint worked right of the bat with what I had already registered I think it even sensed it better than the stock protector that came with the phone, well spent $40 bucks on amazon
Forgot to mention it fits perfect with my otterbox case
neils31 said:
Will this work with the samsung clearview cover ?
and can this protector be easily removed?
thanks
Click to expand...
Click to collapse
Not sure about the Clearview cover, I haven't ordered it yet.
As for removal, it uses LOCA glue to adhere the screen protector to the phone, so it's not the easiest thing to remove, but will come off with a little effort. You will want to have lots of alcohol wipes handy to clean the screen afterwards. Maybe a few Band-Aids, too
AMfilm doesn't seem to gather dust at the edges like it did with the Whitestone install on my Galaxy Note 9. That's a blessing! I was always cleaning clingy dust away on a daily basis. The edges on this install are clean!
RaymondPJR said:
AMfilm doesn't seem to gather dust at the edges like it did with the Whitestone install on my Galaxy Note 9. That's a blessing! I was always cleaning clingy dust away on a daily basis. The edges on this install are clean!
Click to expand...
Click to collapse
Hey Ray, do you know why? is it because of different density loca glue? I really want to switch to glass protector but hesitant because of dust built up around the edges.
Sent from my SM-N975W using Tapatalk
neils31 said:
Will this work with the samsung clearview cover ?
and can this protector be easily removed?
thanks
Click to expand...
Click to collapse
yep. works with every case i got so far. Might have issue with the ones with a front plastic piece though like on some heavy duty cases.
not sure about removal, but ive not had issue with any loca based one so far in the years ive used them.
lexi250 said:
Hey Ray, do you know why? is it because of different density loca glue? I really want to switch to glass protector but hesitant because of dust built up around the edges.
Click to expand...
Click to collapse
It must be a difference in the glue, I don't know what else accounts for it. I had really fuzzy edges all the time with WS.
How hard is it if you want to remove the screen protector pls?
I'll add my review...
I applied this to my S20+ yesterday. The steps were clear on paper, but the video was more helpful still.
Everything went fine with the exception that when I opened the adhesive tube it sprayed out a bit even before the top cap was opened, and I suspect this is due to me living at a high altitude. As a result my glue didn't fully spread to the whole screen, but close, and there were many small bubbles in the center of the screen. Next time I might try opening and closing the top first to equilibrate pressure.
That said, this is a promising product. It has a smooth and even finish, remains low profile so my case fits which still wraps the lateral edges, and the fingerprint part works a bit better than with the cheap plastic screen protector that samsung supplied (which also scratched easily).
I've never used screen protectors on prior phones, but this product is nice enough that I'll use it on future phones as well.
Additionally, the customer service was outstanding and they immediately sent me a replacement protector and more adhesive to try again.
Thumbs up so far, I'm confident my next application will be successful.
For those who installed this last year, how has it held up?
Jammol said:
For those who installed this last year, how has it held up?
Click to expand...
Click to collapse
Not good I'm guessing, based on the lack of replies. Wish someone woulda replied, oh well...
Sent from my SM-N950U using Tapatalk
Sorry, haven't been on XDA much. I've had my amfilm since Dec, 2019 and it's still like new. Oleophobic coating has not wear off.
Just bought 10plus... any tempered glass without a hole in market? I dont care for finger print reader... if anyone got a good tempered glass kindly post link.. thank you so much.
Double posting please delete, my bad.. thanks
I feel you.
I've had the same issues with urethane etc ones as well.
The reason they're like that is because it will cause optical issues with the front cam.
I don't care about selfies so some refraction, cmos reflections etc don't concern me.
At the end of the day finding the best screen protector that fills your needs is more important than that bloody cam hole.
If you can find one without sacrificing other needed parameters, fine. If not don't sweat it as the hole causes little trouble normally in well design protective cover.
The wet apply Gorilla IQ Shield has one and even on this 6 month old screen protector it's adhering perfectly around said hole.
It's time to replace it now and the hole was no issue at all in my case.
Been an alinsea tempered glass fan, for they have been good and great price. Puppy knocked onto floor so need a new one. Kinda changed search words for protector and have found Akcoo screen protector. Getting about same reviews as alinsea. Someone always has to degrade. Guess I will find out and let ya know.
So 3 screens. No hole camera cutouts no fingerprint locations. You are thinking...junk. I have posted pictures after on. Review...Love It No camera holes no fingerprint set area and nice side to side edge meet screen Most screens once hole set to camera you have a gap between screen and phone case. Not now. Once on, set, fits nice. Was paying 9.99 for one. Now you get 3 clear screens and all accessories. 16.99. No complaints. If you don't here from me. No problems. Watch video and cover plus lightly push fingerprint area while using light. Fingerprint works phenomenal!
Updated pick showing camera hole