Hi All,
I've searched hi and low but no one seems to ask this question.
I always use the international format when entering phone numbers in my dialer
+1 (999) 999-9999 x 111
when using the dialer (smart dialing) once I have found the contact, I can't see the last number when I have no extension.
I use the dialer to find numbers when I need to use the land line to dial as the airtime is expensive.
The other problem is when I have an extension entered in the dialer seems to dial and then end the call.
If I replace the x for the extension with a p it seems to work, is this normal?
Thanks in advance.
This site is great!!
testergg
currently using rom version 3.62.502.3
radio version 1.54.07.00
I do the same thing except I do not include the leading '1' and I have no issues.
Basically I am looking for some software which, on receipt of an SMS will initiate an outbound call to a number in the contact list on the phone.
something along the lines of :-
SMS received from 1-555-5555 containing the word CALLBACK and a password.
Phone then dials 1-555-4444 or any specific contact as defined in its config
it doesn't have to use the contact list but must be triggerable remotely.
Target device is a HTC Hermes. and possibly a StarTrk
The program doesn't need to be stealthy, it's to initiate the call with full permission from the owner but without intervention.
Partly it's for my grandfather, if I give him a Startrk then I want to be able to activate a call remotely if I get notified that he has triggered his medicalert system, so I can try to see if he is ok without him having to answer a call.
I googled, and found nothing, I'm hoping someone here can either write an app that can do what I need, or suggest a product that will enable me to do this.
Auto answer is too generic, I want it to be just for myself and not all callers, and the password is because there may be times I just want to send a generic SMS
Sounds like you are talking about an SMS Callback trigger, though I have never heard of a mobile based one.
I always seem to want the impossible or the unwritten maybe it's time one was written?
Crash Override said:
I always seem to want the impossible or the unwritten maybe it's time one was written?
Click to expand...
Click to collapse
just unwritten, it's not impossible
pretty easy actually
i'll try to throw some together this week if/when I have the time
try this
Just place it on the phone and edit the config.ini if needed default settings are:
trigger = CALLBACK
password = pass
I tested this on my TyTn2, and it seems to do what you wanted, the program will activate the speaker when calling (can be changed in the config.ini)
this way if your grandfather cannot reach the phone he still be able to talk..
But test it before use, I'm not sure how sensitive the mic of the phone is.
I do like the idea so I'll probably add some more functionality
- auto pickup on call from fixed number
- status
- call/sms log
Let me know what you think.
PS. this was created for a touch screen device not a smart phone...
also I can not be held responsible for damages, phone bills etc.
but that goes without saying ..right
-=edit=-
tested by sending an SMS to myself, the program then called my number, but when i tried with a friends phone it didn't work
let me know if it works for you (if you have 2 phones)
also make sure if the number you send it from is in your phonebook or not (could be the issue)
-=edit=-
that is the issue, working on it
Issue solved
now I need to figure out how to replace the attachment
I'll add it in a new post
I also believe SKSchema can do this in watch mode. Actually SKSchema can do lots of cool things in watch mode.
new version attached
-=edit=-
build a cab, also added apptodate support
is it just me or does it seem to autodial the number that sent the SMS?
one addition would be the facility to set the option that if number X sent the SMS then callback to number Y
example - if I am in the US I will have the number 1-555-1234 but my grandfather is in the UK - +44-555-5555
I run a voip line with a UK DID number such as +44-555-6666 so when the SMS is received from 1-555-1234 the return call goes to the +44-555-6666 instead of the US Cellphone (cost reasons lol, UK landline free, international call of any length = US national debt)
Here is a SMS Trigger I built, do not know if that satisfy you.
Check rk-SMSSwitch under my signature.
Crash Override said:
is it just me or does it seem to autodial the number that sent the SMS?
one addition would be the facility to set the option that if number X sent the SMS then callback to number Y
Click to expand...
Click to collapse
yes you are right, don't know how i could have overlooked that
I'll fix this in the next version
any other requests?
:-D
-=edit=-
Program updated, you should be able to run apptodate to get the new version
don't you love just that program
Mr_Gee said:
any other requests?
:-D
-=edit=-
Program updated, you should be able to run apptodate to get the new version
don't you love just that program
Click to expand...
Click to collapse
Will there be a Smartphone version of this app that I could run on my QTek 8500 (StrTrk) ?
Thanks
timwb said:
Will there be a Smartphone version of this app that I could run on my QTek 8500 (StrTrk) ?
Thanks
Click to expand...
Click to collapse
Sorry, i just noticed this reply
To be honest i wasn't planning on creating one, but i could give it a shot
the biggest problem is i don't have a Smartphone to test it on..
I'm sure you could probably find a few testers in the forums, there's quite a lot of people on here!
I'll obviously be willing to test anything you are able to come up with. I don't know where you are located mr gee but on ebay UK you can buy an old Orange spv c500 (HTC Typhoon)or c600 (HTC Tornado I think) really cheap now. There are also WM6 roms available for these devices on this site somewhere.
timwb said:
I'm sure you could probably find a few testers in the forums, there's quite a lot of people on here!
I'll obviously be willing to test anything you are able to come up with. I don't know where you are located mr gee but on ebay UK you can buy an old Orange spv c500 (HTC Typhoon)or c600 (HTC Tornado I think) really cheap now. There are also WM6 roms available for these devices on this site somewhere.
Click to expand...
Click to collapse
I already checked eBay, and there might be some good ones but I don't want to overpay
I'll keep it in mind
Attached is the same program but compiled for a smartphone, I'm not sure if it will work, I remembered I have an emulator for smartphone installed, but I received an error message when running the exe.., I think because the CF.NET wasn't installed..
let me know
I tried it on my QTek 8500. The exe ran but all I got was a window with a blue background and the words "SMS2Call v. 0.03" in black.
No buttons to press or anything, had to use Task Manager to exit it. Which id did without complaint. Thanks for trying, some work may be needed I think
timwb said:
I tried it on my QTek 8500. The exe ran but all I got was a window with a blue background and the words "SMS2Call v. 0.03" in black.
No buttons to press or anything, had to use Task Manager to exit it. Which id did without complaint. Thanks for trying, some work may be needed I think
Click to expand...
Click to collapse
Currently that is the program
Could you try to edit the ini file?
in case you have 2 phones, add the number from the 2nd phone in the file
save and run the program
send an sms from the 2nd phone with the passcode mentioned in the ini file
your 1st phone should call this number after the SMS receipt
I know the program doesn't look like much but i might fix this in the future
when i do i'll also look at the exit button.
the reason i didn't was because the application was for an older person,
this person could be playing around with the phone accidentally closing the program ...
I looked in the .ini file and then tried sending a text to the phone containing the words CALLBACK PASS. I tried this with/without a space, up and lower case, with the program in the background or on screen but it didn't do anything. Do I have to put a shortcut in the Startup folder or something? Or am I not formatting the text message properly? The sending phone number is in the contacts list if that makes a difference.
Any ideas?
Thanks
Could you just not set his phone to auto answer ? - that way you can call him any time.
timwb said:
I looked in the .ini file and then tried sending a text to the phone containing the words CALLBACK PASS. I tried this with/without a space, up and lower case, with the program in the background or on screen but it didn't do anything. Do I have to put a shortcut in the Startup folder or something? Or am I not formatting the text message properly? The sending phone number is in the contacts list if that makes a difference.
Any ideas?
Thanks
Click to expand...
Click to collapse
not really, assuming it works maybe it has to do with the formatting,
Callback should be in capitals and pass in lower letters.
when I tested this with my TYTN2 it worked the way it should.
also did you enter the default number ? e.g. the number that will be called?
PauloJ5 said:
Could you just not set his phone to auto answer ? - that way you can call him any time.
Click to expand...
Click to collapse
[sarcasm]
Gee why didn't I think of that...
[/sarcasm]
Seriously have you read the thread?
the topic starter didn't want it this way for several reasons...
Default number and closed flip
I didn't enter a default number because I want it to respond to any number that sends the text. I deleted the DefaultNumber line from the config and it worked, to a point. The phone I'm running it on is a Qtek 8500/HTC StrTrk, which for those who don't know, is a flip phone. My problem is this, if the phone is closed when the text is received the call is made but cut off immediately because the phone is set to hang up calls on closing. Nowhere can I find a setting to stop this from happening, anybody have any ideas?
I had the surprise to see that when you start typing on Keypad the name of a contact it only search from the beginning not anyware in the contact name... this is not quite good
Any call managers ?
I had the same experience.
My old pda with windows mobile find characters in contact name no madder there position but only there order.
It this possible with another phone dialer for android?
muntos said:
I had the surprise to see that when you start typing on Keypad the name of a contact it only search from the beginning not anyware in the contact name... this is not quite good
Any call managers ?
Click to expand...
Click to collapse
You might be able to expect this in a future firmware, I use the Korean version where they have better official support. I just tested typing "ley" and it picked up Hayley. Long-term you should be ok.
This was the question I posted right after I bought this phone, search market for dialer one, it will solve your problem until samsung fix this stupid smart dial
Sent from my GT-I9000 using XDA App
Hello guys....well I need some idea with my 3rd year college project...it has to be an useful app and not a game or something:laugh:
My professor came up with 2 topics::
1>>USB-to-USB android connection for file transfer...unlike wireless ......and I do not have any idea how to do that...I mean I searched around and found that there is a way to connect 2 devices via Master-Slave method in this forum but that uses an app and I cannot use that app...neither can I find any tutorial on this matter
2>>Optimistic algorithm...I don't exactly know what that means...I mean how to implement it in an app...
I have thought of one...but I guess that exists...anyways,my idea is a dialer app that searches contacts according to your preference...by name,by last called,by frequently called...making calling on your phone a little easier...also I was thinking of implementing this in a popup manner...where the dialer does not accomodate the full screen but only a portion making the user able to search for a contact and do other activities together....
I know it is a long post but please read and do suggest if you have any ideas...thank you developers :good:
I like option 2. Option 1 seems pointless to me from a useful point of view.
What kind of help do you need for option 2?
My thoughts for the dialer would be a predictive dialer like you described. Store call information in a database about your dialing habits, that will help you predict who you are trying to call. ie - dialed frequency, call length, dialed time of day/day of week.
zalez said:
I like option 2. Option 1 seems pointless to me from a useful point of view.
What kind of help do you need for option 2?
My thoughts for the dialer would be a predictive dialer like you described. Store call information in a database about your dialing habits, that will help you predict who you are trying to call. ie - dialed frequency, call length, dialed time of day/day of week.
Click to expand...
Click to collapse
Yeah, that's a cool idea. But hasn't this been done before?
I'm sure it has but use one's imagination and expand on current ones. It wouldn't be any different than the many different launchers or keyboards.
I'm looking for a simple dialer. My imagination is select some contacts in the phone or it could use just favorite contacts and it should display them on watches and when I click on the contact, a call should be made.
I found this: https://play.google.com/store/apps/details?id=com.xuecs.SpeedDial
but I have significant issues with synchronization and also calling sometimes doesn't work but if it would be bugless it would be exactly what I imagine.
Does somebody know any similar dialer but working well? Thaks
P.S. I live in non-english speaking country and our names are not able to recognize to voice commands.
Take a look on this one..
https://play.google.com/store/apps/details?id=com.guidology.android.minidialer
Does exactly what you ask for, is one of the main i use along with hand dialer https://play.google.com/store/apps/details?id=com.jxt.handdialer
I use two since i only call a few numbers and they are marked as favorites on the MiniDialer and Hand Dialer to hang up the call and know how many minutes i have on the call..
Thanks, it is EXACTLY what I needed. On the pLay is not screenshot of speed dial so I thought that the feature is missing. Great
Yes, so weird they don't show the feature on the screenshots, or even on the description. But they do mention it on the changelog, and i'm using it right now