I've finally getting around to rooting my x10a, but I'm having a problem with step2.cmd. It echos it's schpeel that select option 6 or whatever, without any error (except for the normal "device not found"). I know that it's supposed to come up with a screen that you should select the 6th option on, but it's not showing up!
If anyone is wondering I do have USB debugging on and I have installed all the drivers.
EDIT: I did include the deviceid txt files inside both of the folders.
Actually, "device not found" is NOT normal. It shouldn't say that if it's working properly.
Steps 2 and 3 (and 5 for X10a) use ADB. There are a few things to check (I'll list everything I can think of, including ones you may have already done):
1. ADB doesn't require DeviceID.txt (it's for X10Flash), so it's not that.
2. Make sure USB Debugging is enabled on the phone (under Settings > Applications > Development).
3. Unplug the USB cable and plug it back in. On the phone, the notification bar should show "USB debugging enabled".
4. Make sure that the SD card is NOT mounted to your PC. The notification should show "USB connected", NOT "Turn off USB". If it does say "Turn off USB", then click it to turn it off.
5. In Windows, double-click on the Safely Remove Hardware icon in the system tray. There should be a device called "adb01 ADB Interface Driver". Don't remove it, just make sure it's there. Hit Cancel/Close.
6. Open Task Manager (Ctrl-Alt-Del) and look for a process called "adb.exe". Click it and hit "End Process". Next time you start adb, it should load up the daemon again.
7. Have you tried rebooting your PC? How about your phone?
8. ADB connects using TCP. If you have a software firewall (e.g. ZoneAlarm, Eset Smart Security, etc.), it may be blocking access. Either make an exception, or just disable the firewall for now (don't forget to turn it back on later). No, a router doesn't count (the phone is connected through USB, not your network).
9. There may be a problem with your Sony USB drivers. Uninstall Update Service and PC Companion (if you have them), reinstall them, and then plug in your phone again so that the drivers are reinstalled. I had to do this to fix a different problem (that second USB Mass Storage device kept connecting and disconnecting).
Did you allow unknown sources?
Sent from my X10a using XDA App
Grospolina said:
5. In Windows, double-click on the Safely Remove Hardware icon in the system tray. There should be a device called "adb01 ADB Interface Driver". Don't remove it, just make sure it's there. Hit Cancel/Close.
Click to expand...
Click to collapse
I've done everything but that, which is not there, what should I do about that?
You know what, the laptop I'm using right now really sucks in the spec department, so it might just be that. Is there anyway to reflash it to rogers x10a?
is your laptop using vista 64? If it is follow this post to fix it. http://forum.xda-developers.com/showthread.php?t=713457
to get through step2, i had to install sony ericsson pc companion, it has the drivers which step2 depends on
carmatic said:
to get through step2, i had to install sony ericsson pc companion, it has the drivers which step2 depends on
Click to expand...
Click to collapse
You are a freaking life-saver, going to try that now.
Mod. edit: not dev related, moved to general
Related
Hi,
EDIT * I have found a solution in that I can connect via WI fi so that's pretty good but if anyone can help me with the USB issue, it would still be appreciated. It seems that the Wi Fi connection is more limited as I am unable to view things in explorer *
hoping to get some help using my USB to connect to my PC. I've installed Kies but when I try to connect to my PC it just keeps on trying to connect but never actually does it.
I have looked for guidance on this but keep coming across the instructions to go into 'about phone > USB settings' etc etc. However, I do not have a USB settings in about phone. In fact, there is nothing at all about USB in About Phone. I do have a 'USB Utilities' in Wireless and Networks but all that gives me the option to do is 'Connect Storage to PC'. I have a memory card in my phone.
When I do connect to the USB cable, with Kies open, when windows 'finds new hardware' it keeps saying a problem occurred during installation.
Please can anyone help me out? All I want to do is basically drag and drop some files from my PC to my phone. Thanks very much for your help.
Settings --> Applications -- Development --> USB debugging.
Thanks for that!
It got me a little further. I also unmounted then remounted the SD card. However, when I try to connect via kies I now get the message:
Reconnect the device in Samsung Kies (PC Studio) mode. Current connection mode not supported by Kies.
What am I doing wrong? Do I have to re click the USB settings on the phone before connecting to Kies now that it's installed the hardware on my PC?
Grimlocc said:
Thanks for that!
It got me a little further. I also unmounted then remounted the SD card. However, when I try to connect via kies I now get the message:
Reconnect the device in Samsung Kies (PC Studio) mode. Current connection mode not supported by Kies.
What am I doing wrong? Do I have to re click the USB settings on the phone before connecting to Kies now that it's installed the hardware on my PC?
Click to expand...
Click to collapse
Turn off USB-Debugging
Don't connect phone yet
Open Kies
Open the Tools menu -> Troubleshoot connection error
Go through the guide and let it reinstall the drivers.
Connect you phone, and let it connect
The default setting has the USB debugging tick greyed out. When I select it, it asks me if I want to allow debugging.
Do you mean that I shouldn't allow debugging and then connect (after reinstalling Kies) or should I allow it and connect? Sorry for my noobishness, Android is all completely new to me.
You should untick the USB-debugging - Then reinstall drivers NOT entire Kies
OK, it's unticked and I'm reinstalling the drivers via troubleshooting.
Do I need to unmount then remount the SD card before connecting my phone? Thanks for your help btw.
Shouldn't make a difference
Bah, I still have the same problem. It just says that there was a problem installing the hardware when I plugged in the phone.
After reinstalling the drivers, i shut down Kies then reopened it. I then plugged in the USB and then plugged the USB into my phone.
When I first installed Kies yesterday, Microsoft Active Sync kept on trying to activate and ask for a CD. It kept on holding up Kies. In the end I uninstalled Active Sync. Also, I still have Samsung PC Studio on my PC from when I had a Samsung a few years ago. It was one of those old slider phones, not a smart phone. Could that be part of the problem? I was hoping to keep it because it's proved to have the best media player I've ever had.
I just don't know what I'm doing wrong here.
Try without restarting Kies.
What part of the drivers aren't installed? (Check device manager)
In Device Manager, under Portable Devices there's something called Android MTP that has an exclamation mark next to it. It says it's not configured correctly and that 'No driver files are required or have been loaded for this device'. I'll reinstall the Kies drivers now.
Thanks for this help mljjlm
P.S. Now that I've unplugged the phone, the MTP thing isn't showing in the device manager list anymore.
Grimlocc said:
P.S. Now that I've unplugged the phone, the MTP thing isn't showing in the device manager list anymore.
Click to expand...
Click to collapse
Of course, it's a part of the phone, and it should not be plugged in because they would have to force a reboot when reinstalling drivers (which might sort your problem btw)
Reinstalled the Kies Drivers and then plugged in my phone but got the same problem. It says a problem occurred. Same device now has a problem in device manager. Maybe I should just uninstall everything and restart? Should I uninstall the old PC studio too?
Just try the reboot without uninstalling anything and then plug the phone in when your pc has booted
Argh! Still didn't work! I think there must be a problem with my PC, well, I'll try doing full uninstalls and reinstall it all. I have to go now as well so I'll have to try again tomorrow.
Thanks very much for your patience mljjlm. It has been greatly appreciated
Are you trying to just transfer files back and forth? If so... forget using Kies.
(I don't have a micro-USB cable with me currently, so this is all from memory)
Just remove the drivers from your device manager so it's like your machine has never seen your phone before. Then on your phone enable usb-debugging.
When you then plug in your phone, you should get a usb icon up top on your phone's display... pull the window-shade down and click on the USB connection button. You should get a fullscreen window on your phone that says something like USB Connection with the friendly android waiving.
Now your PC should see your phone as a standard USB mass storage device.
try plugging the usb cable in another usb port on your computer and than try again.
Grimlocc said:
All I want to do is basically drag and drop some files from my PC to my phone. Thanks very much for your help.
Click to expand...
Click to collapse
oinkylicious said:
Settings --> Applications -- Development --> USB debugging.
Click to expand...
Click to collapse
Grimlocc said:
when I try to connect via kies I now get the message:
Reconnect the device in Samsung Kies (PC Studio) mode. Current connection mode not supported by Kies.
What am I doing wrong?
Click to expand...
Click to collapse
You're using Kies, that's what you're doing wrong. You said in your very first post you wanted to be able to drag and drop some files from your PC to your phone, so use USB debugging (say yes when it asks you) and Windows Explorer.
If you are using a custom rom like Checkrom Revolution you will need to install the kies support from kitchen pro.
Also are you using the cable that came with your phone?
I have found a few microUSB cables that will allow charge and wont allow data transfer like the new ones for nokia devices and some blackberrys.
It worked! The USB debugging thing!
Thanks to everyone who helped me out. The forum said I was limited to 5 thanks per day so if you didn't get one of the thanks I apologise. Thanks very much!
I'm running Windows 7 64bit and followed the Ultimate guide to unlock and root my Nexus 4.
Everything went well but now it looks like that Windows won't recognize my phone as a device. When I plug in the phone, the auto-play window will pop out and recognize it as Nexus 4, but there is no other options. (Normally the auto-play will ask if open folder to view files or transfer photos). I can't see my phone in device manager either.
If I turn on the USB debugging mode, I can see it in device manager but still cannot see it in My Computer. Looks like Windows can't access the SD card at all.
I tried switching to the camera mode but the problem remained. Please help.
desperate bump. can anyone help?
Maybe it's a stupid advice, but have you tried change the USB port in PC?
glancer2315 said:
desperate bump. can anyone help?
Click to expand...
Click to collapse
Plug in the phone, uninstall the drivers from Device manager, then unplug, and replug.
Colourkey said:
Maybe it's a stupid advice, but have you tried change the USB port in PC?
Click to expand...
Click to collapse
yes, i did.
abaaaabbbb63 said:
Plug in the phone, uninstall the drivers from Device manager, then unplug, and replug.
Click to expand...
Click to collapse
thanks for your advice. the problem is that, without USB debugging mode on, I can't see Nexus 4 in Device manager, even though the Windows Auto-play will say Nexus 4 connected. (Nothing in My Computer either)
With USB debugging mode on, I uninstalled the driver and Windows would try installing the driver. Now it shows up as MTP device with an exclamation mark. I tried manually update the driver (direct it to the Google SDK folder and pick the android_windowsusb.inf) but it says it does not support x64. I don't think the 64 bit driver is digitally signed.
I think I had a similar problem as yours. If you deleted the drivers while on debugging mode and reconnected after and it's showing the exclamation mark of a unknown device, try restarting your computer and plugging your phone back in.
SovereigN7 said:
I think I had a similar problem as yours. If you deleted the drivers while on debugging mode and reconnected after and it's showing the exclamation mark of a unknown device, try restarting your computer and plugging your phone back in.
Click to expand...
Click to collapse
i did and it remains the same.
Is there anyway I can know all the files names of the drivers so that I can manually delete them from system folder? When I uninstalled it from the device manager, I don't see the option "Delete the driver software for this device".
I can still see it under "adb devices" list.
I think there are some conflicts in the drivers.
Now when I connect Nexus 4 (without USB debugging mode on), it will show up in device manager under Android Device.
With USB debugging, it will then show up under Portable Devices.
However, it's supposed to work the other way around. that is (no USB debugging --> portable device; with USB debugging --> Android Device).
How can i solve this?
Have you tried manually installing the drivers before plugging in the phone, vs letting windows choose the drivers it wants to install? One option you could try is installing PDA Net on your pc. It will install reliable drivers on your pc.
i also had this same problem after flashing my first custom rom on the n4, and i also run windows 7 Ultimate x64
here is the process i use for full clean installation of device
on phone
goto SETTINGS > STORAGE > (menu) USB Computer Connection
make sure Media Device (MTP) is checked
With USB Debugging On
On your PC go to device manager
there should be 2 devices (Android Phone > Android Composite ADB Interface & Portable Devices > Nexus 4) - this is on a fully working n4 so you might only have 1 of them
Right click on each of them and click uninstall
The popup box should have another check box to delete the driver also, if this is available check it then confirm (note mine only has the box for Android Phone > Android Composite ADB Interface, but if yours has it on both then check it on both)
your computer will now ask you to restart, dont do it yet
repeat previous step for the other device if you have 2 then reboot
upon rebooting it will automatically start reinstalling drivers
by expanding the selection you should see 2 devices
Nexus 4 - Successful - Ready To Use (this is your MTP connection)
Nexus 4 - Unsuccessful - No Driver Found (this is your ADB Connection)
at this point you should be able to access internal storage however ADB will not work
go back into device manager
you should now have
Portable Devices > Nexus 4
and Other Devices > Nexus 4 (with yellow exclamation mark)
right click on the Other Devices > Nexus 4 (with yellow exclamation mark)
hit Update Driver Software
click Browse my computer for driver software
click Let Me Pick Drom a List of Device Drivers On My Computer
double click Show All Devices
click Have Disk...
click Browse
navigate to the download directory for the google usb drivers (for me this was "C:\Program Files (x86)\Android\Android-SDK\Extras\Google\Usb_Driver")
double click on the android_winusb.inf file
click OK
double click "Android Composite ADB Interface"
it will then install the driver for ADB
you should now have full access to internal storage and ADB
Alex240188 said:
i also had this same problem after flashing my first custom rom on the n4, and i also run windows 7 Ultimate x64
here is the process i use for full clean installation of device
on phone
goto SETTINGS > STORAGE > (menu) USB Computer Connection
make sure Media Device (MTP) is checked
With USB Debugging On
On your PC go to device manager
there should be 2 devices (Android Phone > Android Composite ADB Interface & Portable Devices > Nexus 4) - this is on a fully working n4 so you might only have 1 of them
Right click on each of them and click uninstall
The popup box should have another check box to delete the driver also, if this is available check it then confirm (note mine only has the box for Android Phone > Android Composite ADB Interface, but if yours has it on both then check it on both)
your computer will now ask you to restart, dont do it yet
repeat previous step for the other device if you have 2 then reboot
upon rebooting it will automatically start reinstalling drivers
by expanding the selection you should see 2 devices
Nexus 4 - Successful - Ready To Use (this is your MTP connection)
Nexus 4 - Unsuccessful - No Driver Found (this is your ADB Connection)
at this point you should be able to access internal storage however ADB will not work
go back into device manager
you should now have
Portable Devices > Nexus 4
and Other Devices > Nexus 4 (with yellow exclamation mark)
right click on the Other Devices > Nexus 4 (with yellow exclamation mark)
hit Update Driver Software
click Browse my computer for driver software
click Let Me Pick Drom a List of Device Drivers On My Computer
double click Show All Devices
click Have Disk...
click Browse
navigate to the download directory for the google usb drivers (for me this was "C:\Program Files (x86)\Android\Android-SDK\Extras\Google\Usb_Driver")
double click on the android_winusb.inf file
click OK
double click "Android Composite ADB Interface"
it will then install the driver for ADB
you should now have full access to internal storage and ADB
Click to expand...
Click to collapse
thank you for your long and detailed reply.
this is what i wanted to do, but the problem is that when I uninstall them, I don't get to see the option "delete the driver software for this device". What should I? cuz every time I plug in Windosws just tries to automatically install the driver for me.
Have you tried toggling to ptp mode then back to mtp on your phone. It's odd indeed.
The fact that you can't remove the driver is because that is the mtp one which is built in to media player. Let me give this some more thought
EDIT: You said that with USB debugging disabled your device is listed under device manager as an android device
can you check and verify exactly what it is listed as? as it should be portable device
Sent from my Nexus 4 using xda app-developers app
Alex240188 said:
Have you tried toggling to ptp mode then back to mtp on your phone. It's odd indeed.
The fact that you can't remove the driver is because that is the mtp one which is built in to media player. Let me give this some more thought
EDIT: You said that with USB debugging disabled your device is listed under device manager as an android device
can you check and verify exactly what it is listed as? as it should be portable device
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
hi under android device it shows up as Android adb device
under portable device i can it now showing up as MTP USB device with exclamation mark.
glancer2315 said:
hi under android device it shows up as Android adb device
under portable device i can it now showing up as MTP USB device with exclamation mark.
Click to expand...
Click to collapse
does adb work?
i.e. adb devices
or is USB debugging turned off at this point
Also. The one with the exclamation mark. Right click and go to properties. What does it say in device status
Alex240188 said:
does adb work?
i.e. adb devices
or is USB debugging turned off at this point
Also. The one with the exclamation mark. Right click and go to properties. What does it say in device status
Click to expand...
Click to collapse
hi, adb devices works. (will list my device when usb debugging is on)
with usb debugging off, under portable device, the device status says "This device cannot start. (Code 10)". thanks.
still looking for solutions. maybe i should try uninstalling the ADB driver, but the problem is that when i uninstall the device from the device manager I don't see the option "delete the driver software for this device", any help?
glancer2315 said:
still looking for solutions. maybe i should try uninstalling the ADB driver, but the problem is that when i uninstall the device from the device manager I don't see the option "delete the driver software for this device", any help?
Click to expand...
Click to collapse
I have this same issue I'm trying to find a fix, that's how I found your thread. Alex gave very good info make sure you go back to his posts and hit his "Thanks" button, I did it on everyone one of his posts in this thread. I'm starting to think it's a hardware issue and not a software issue, I've never had this issue on any device. When I got it new running stock 4.2.2 MTP didn't work. ADB works and PTP works, just not MTP no matter what I try. I recommend you learn to use, ADB push and pull to move your files if you don't already know how to use it (To use ADB I need to check PTP for it to work and not MTP) you might need to do the same. I will keep you posted if I find a fix.
Sent from my Nexus 10 Pimpin AOKP 4Life
I'm just getting more and more confused with this.
If Adb works then you must have an Adb driver installed for the phone. However your also stating that you get no box for uninstall driver.
With USB debugging disabled you said that it appears as an android phone rather than a portable device. This should not be.
With debugging disabled what happens if you Try to uninstall in device manager
Sent from my Nexus 4 using xda app-developers app
---------- Post added at 01:54 PM ---------- Previous post was at 01:51 PM ----------
My theory still stands that you have updated the mtp driver with adb drivers. Hence why mtp doesn't work but ptp does.
The problem is getting to a position where you can uninstall the adb drivers from the mtp device and let it reinstall the proper drivers
Sent from my Nexus 4 using xda app-developers app
I plugged another Nexus 4 in, and all the drivers loaded perfectly. I then tried my Nexus 4 phone, and nothing happens. No mtp, no adb, no boot loader drivers. Its my phone. My next step is to find a zip file that I can flash via custom recovery, which will bring all the binaries and ROM back to stock. Anybody know where I can find this? I'll probably lose the custom recovery, but hopefully it will be fixed and I can flash the custom recovery again.
LG-E960
Hi, when I plug in my device I can only see two folders and not all the folders I have on it. How do I bring up the dialog "Allow computer x..." again? I think I messed that up. Thanks ^_^
I had the same problem. After a reboot all the folders were visible.
Sent from my Nexus 4 using xda app-developers app
It might be a driver issue. If you haven't already installed the ADB drivers, do so by following this guide pulled from the Rooting sticky:
Jubakuba said:
Get the drivers:
Uninstall any previously attempted drivers if they don't work and move to the next.
[url="http://forum.xda-developers.com/showthread.php?t=1514942"]Option One:
Navigate to the "Device Manager" (Control Panel > Device Manager) in Windows and Select the android device. Open the properties and select the "Install Driver" option. Pick the driver with "Install from disk." Ignore any warnings about the driver not being signed properly.
PDAnet's drivers may work if the above options don't. Simply install PDAnet (after uninstalling any previous attempted driver installations) to get the drivers.
Click to expand...
Click to collapse
Even after all of that, it might not work. Use MTP (Settings>Storage>...>USB Computer Connection. Try turning USB debugging on or turning it off (Settings>Developer Options>USB debugging). Try switching which USB port on your computer you are plugged into (that one gets me every time I plug my phone into a new computer).
Hopefully that helps somewhat. Depending on what else you need to do with your phone, you don't necessarily need the ADB drivers to see the folders, but I find that those drivers + that guide to be the easiest to install and follow.
Hi,
So I have had a good experience with the Kogan Agora 7" a couple of years ago. I flashed a new ROM and my 6 year old still idolizes it. It's perfect for games and movies while traveling and cost bugger all.
I was considering getting my kids a console unit for games but came across the new Quad core HDMI Dongle. I though to myself there is the ticket, When traveling i could use it as a smart TV (plug and play is King) Or it may be possible to replace or augment my Media-portal HTPC system.
I bought one and on the face of it it appears to do all that I require from an Android device like web surfing, mail checking and video streaming fine, except when it came to installing the Playstation controller.
I needed Root access and it was a bit of a pain to get it done. BUT I found it!
I used RK3188_ROOT for CX-919 FW0715 MOD by Everal. found here.
1. Turn the device on
2. Make sure USB debugging is enabled
3. Connect the device to Win7
4. Start the file "TPSparkyRoot.bat" as admin
Enjoy.
So if anyone decides to purchase one of these to play with, you will be glad to know that it is a Rockchip RK188. Weather you think that hardware is good or not is irrelevant but it is useful to know as I tried many methods to gain root but once I had this bit of info it became easy.
Those infinity Pocket PC's may be the same although I can't be sure.
I managed to pair a sixaxis controller and am working on getting it running in a game. I will post if i have any more issues and or success.
Raskern said:
1. Turn the device on
2. Make sure USB debugging is enabled
3. Connect the device to Win7
4. Start the file "TPSparkyRoot.bat" as admin
Click to expand...
Click to collapse
Thanks for posting this info. However I'm not able to get this to work. My PC doesn't recognise the device when it's in "USB Debugging" mode. In the device manager it just appears in "Other Devices" as "KHSTVQCDONA". I've tried updating the software, selecting the "usb_drivers" folder containing drivers provided in the downloading Zip file, and also tried downloading the "Google USB Drivers" directly from Google, but Windows doesn't find the drivers for this device.
If I disable "USB Debugging" the device does connect successfully under "Portable Devices", but clearly that's not much use.
I can't seem to figure it out.
Below are the steps I took in trying to get it to work. I was going to write it as a guide for dummies, but I never got it working...
Download the software from the link above. On the "Share-Online" page click the small-ish button that says "continue for free", and not the bit "DOWNLOAD FILE (regular download)" button in the banner ad (that I feel very silly for clicking several times).
Once the file "RK3188_ROOT for CX-919 FW0715 MOD by Everal.zip" has finished downloading, extract it to a temp location on your PC.
Make sure the Micro-USB port of the device is connected to a power source (either your PC or the provided AC adapter). The port doesn't seem to transfer data.
On the Agora device, go to "Settings", open the "USB" menu, and enable "Connect to PC". Without this the device wasn't recognised by my PC at all.
In "Settings", click on the "Developer options" menu, and tick "USB debugging".
Connect the provided blue Male-Male USB cable to a full-sized USB port on the device, and to a USB port on your PC. At this stage the device connects but is not recognised.
Open the Windows "Device Manager".
In the "Device Manager", expand "Other Devices", then right-click on "KHSTVQCDONA" and click on "Update Driver Software".
Click "Browse my computer for driver software".
Navigate to the "usb_drivers" folder of the software you extracted earlier, select it, and click "OK".
Click "OK". THIS DIDN'T WORK, stating that "Windows was unable to install your KHSTVQCDONA" and "Windows could not find driver software for your device".
[*] Open "Command Prompt", by right-clicking on it and clicking "Run as Administrator".
[*]C:
[*]cd RK3188_ROOT
[*]TPSparkyRoot.bat
At this point I see the following:
*---* VonDroid.com N101 II Root Tool based on work by sunnydavid *---*
--- Plug in your device, make sure debugging is enabled in Developer Options
--- This script will now copy files over to your N101 II
error: device not found
error: device not found
error: device not found
--- Reboot 1/3 - Press Space Bar once the device has rebooted
Press any key to continue . . .
error: device not found
error: device not found
error: device not found
--- Reboot 2/3 - Press Space Bar once the device has rebooted
Press any key to continue . . .
error: device not found
--- If the ID shows as 0/root then continue, otherwise CTRL+C to cancel and star
t over
Press any key to continue . . .
Click to expand...
Click to collapse
I terminate at this point
I've also done the following
Un-ticked "Verify apps over USB"
In "Security", ticked "Unkown sources", and un-ticked "Verify apps"
At this point I'm totally at a loss.
I had already started using the device initially, so I did a factory reset, but this hasn't helped at all.
Can you see anything I'm missing, or point me in the right direction?
Many thanks in advance! :good:
Ok So I know i messed around with many drivers installing and uninstalling before it worked. I Thought it was the last set that came with the Root method but I may be wrong.
Also I cant remember exactly now but I am pretty sure if you activate the connect to computer you bypass the ROM and connect to the SD card and the U SD. So that would not help when accessing the root files.
Try re-installing the drivers after connecting without the box checked in settings or try the ones from super oneclick 2.3.3 or even the pocket pC ones. you may also need to uninstall the device then reconnect to get a clean run at it. Windows likes hanging onto what it thinks is the best driver even when they don't work or are completely wrong.
Also I ran the batch file form within windows not in console, Just right clock to run as administrator.
I have just used it for a couple of weeks in Japan get let the Kids watch Aview (iView) and it worked a treat. Also the latest sixaxis updates made the controller even better than before. I can probably have a tool around with it later this week but I am busy before then so wont be able to help any. It can be done!
PM me if you cant find the drivers mentioned above I can email them to you.
Thanks for the quick response.
Can you just confirm that you were connecting using the blue Male-Male USB cable, and not a USB-Micro-USB cable?
When I connect to the Micro-USB port it doesn't see a device at all. It just seems to provide power.
When I connect with the blue Male-Male USB cable, unless I have "Connect to PC" ticked, it also doesn't see a device.
I don't have a micro-SD card installed, but that doesn't matter right?
I'll try those drivers you suggest. Thanks.
I am quite keen to figure out what is different but I cant access it for a couple of days sorry.
I definitely used a full sized USB to Connect, I may have used another one, and powered it from the Micro USB direct to power supply. If you are connecting it to the PC for power it may cause problems.
I know that you cannot access the recovery menu unless you are powering through the Micro USB only. Another thing I meant to mention in my original post. I may have posted it elsewhere.
SUCCESS! After I got the SuperOneClick software to forcibly install the drivers the device was then recognised and I could root the device.
Thanks. I'll write up the full instructions.
Excellent!! Thanks for writing up the guide.
OK, here is a full step-by-step guide for getting this to work:
Download "SuperOneClick" from Download.com (CNET). I can't post external links right now because I'm a new user, but it will appear if you do a Google search.
Extract SuperOneClick to a temporary location ("C:\temp" for the purpose of this installation).
Download the software from the link in the first post above. On the "Share-Online" page click the small-ish button that says "continue for free", and not the big "DOWNLOAD FILE (regular download)" button in the banner ad (that I feel very silly for clicking several times).
Once the file "RK3188_ROOT for CX-919 FW0715 MOD by Everal.zip" has finished downloading, extract it to a temp location on your PC (for the purpose of these instructions "C:\temp").
Make sure the Micro-USB port of the device is connected to a power source (ideally the provided AC adapter). The port doesn't seem to transfer data so don't connect it to your PC, unless you are using your PC as the power source. Basically as long as it's turned on, then continue.
On the Agora device, go to "Settings", open the "USB" menu, and enable "Connect to PC". Without this the device wasn't recognised by my PC at all.
In "Settings", click on the "Developer options" menu, and tick "USB debugging".
Connect the provided blue Male-Male USB cable to a full-sized USB port on the device, and to a USB port on your PC. At this stage the device connects but is not recognised.
Open "SuperOneClick"
In SuperOneClick click the "Advanced" tab, then click "Check Drivers".
When prompted to ask if you would like it to forcefully install drivers, click "Yes".
Click the "Install..." option when prompted by "Windows Security".
You should then hear the device connect, and disconnect, and see an message "Driver installed! Please reconnect your device", so click "OK".
Disconnect the blue USB cable from you PC, and then reconnect it. You should hear that the device has connected successfully (and it now appears as "Android Composite ADB Interface" in you "Device Manager" if you care to check.).
Open "Command Prompt", by right-clicking on it and clicking "Run as Administrator". (I found that running the .bat file directly failed because it didn't find the "adb" application)
C:
cd temp\RK3188_ROOT
TPSparkyRoot.bat
Follow the prompts from here. The application should reboot your device several times (if not something is wrong), after which point you press any ket to continue. From here everything was very straight-forward once the .bat file completed the device was then rooted.
Enjoy
I had to do things differently......
Used rocketchip_batch_tool_1.7 for drivers, superoneclick didnt do anything.
I ran the batch from the folder on my desktop.
For EACH device re-boot i had to RE CHECK connect usb on cx919 settings.
I got a few errors about no more storage on my device when it tried to copy some stuff, although i have the super user and i tried sixaxis controller which requires root and it worked. Not sure what the files were.
update:
Hmm and it seems SSL websites dont work now as well as Netflix or the Store.
ill have to try something else!
Update:
did a factory wipe. all seems ok now.
TeqTeq said:
OK, here is a full step-by-step guide for getting this to work:
Download "SuperOneClick" from Download.com (CNET). I can't post external links right now because I'm a new user, but it will appear if you do a Google search.
Extract SuperOneClick to a temporary location ("C:\temp" for the purpose of this installation).
Download the software from the link in the first post above. On the "Share-Online" page click the small-ish button that says "continue for free", and not the big "DOWNLOAD FILE (regular download)" button in the banner ad (that I feel very silly for clicking several times).
Once the file "RK3188_ROOT for CX-919 FW0715 MOD by Everal.zip" has finished downloading, extract it to a temp location on your PC (for the purpose of these instructions "C:\temp").
Make sure the Micro-USB port of the device is connected to a power source (ideally the provided AC adapter). The port doesn't seem to transfer data so don't connect it to your PC, unless you are using your PC as the power source. Basically as long as it's turned on, then continue.
On the Agora device, go to "Settings", open the "USB" menu, and enable "Connect to PC". Without this the device wasn't recognised by my PC at all.
In "Settings", click on the "Developer options" menu, and tick "USB debugging".
Connect the provided blue Male-Male USB cable to a full-sized USB port on the device, and to a USB port on your PC. At this stage the device connects but is not recognised.
Open "SuperOneClick"
In SuperOneClick click the "Advanced" tab, then click "Check Drivers".
When prompted to ask if you would like it to forcefully install drivers, click "Yes".
Click the "Install..." option when prompted by "Windows Security".
You should then hear the device connect, and disconnect, and see an message "Driver installed! Please reconnect your device", so click "OK".
Disconnect the blue USB cable from you PC, and then reconnect it. You should hear that the device has connected successfully (and it now appears as "Android Composite ADB Interface" in you "Device Manager" if you care to check.).
Open "Command Prompt", by right-clicking on it and clicking "Run as Administrator". (I found that running the .bat file directly failed because it didn't find the "adb" application)
C:
cd temp\RK3188_ROOT
TPSparkyRoot.bat
Follow the prompts from here. The application should reboot your device several times (if not something is wrong), after which point you press any ket to continue. From here everything was very straight-forward once the .bat file completed the device was then rooted.
Enjoy
Click to expand...
Click to collapse
Worked fine since then. All a sudden same prob, no Netflix no store. Wtf?
Just wanted to post an updated root method since i got one of these second hand last week
1. get the universal rockchip drivers, or the latest generic google ones. both worked for me on two different PC's. (including windows 8.1 x64)
2. Enable USB Debug mode in developer options. you know the drill.
3. the kogan device has a "USB" menu in settings, that has a 'connect to PC' setting. turn that on or ADB cuts out shortly after the system boots - turn it off after rooting for it to work normally.
4. connect PC to kogan dongle via the USB port next to the power LED. The other one doesnt work.
5. root with whatever method you want - i used kingo root which rooted it flawlessly first time.
6. have fuuuuun!
3 and 4 stumped me for days til i figured out what was going on. not something i'd ever encountered before, and likely unique to this device and why some people cant figure it out.
Anyone else with problems seeing the storage after plugging into PC? adb command works and device drivers installed. Found another forum where turning the usb from MTP to charging and back under developer options does the trick. I have a non stock ROM and seeing if fresh out of the box experiences the same thing.
I have the same issue and can't seem to figure out how to get it to work. My work around has been to use ES File Explorer and open Remote Manager.
Edit: I just plugged it in again to see what I can find. I turned off USB Debugging and Developer Options. Plugged in and pulled the notification bar down, there is an option to change USB Settings to Charging, Power Supply, File Transfers (this works), Photo Transfer and MIDI. Give it a go!
rramey23 said:
I have the same issue and can't seem to figure out how to get it to work. My work around has been to use ES File Explorer and open Remote Manager.
Edit: I just plugged it in again to see what I can find. I turned off USB Debugging and Developer Options. Plugged in and pulled the notification bar down, there is an option to change USB Settings to Charging, Power Supply, File Transfers (this works), Photo Transfer and MIDI. Give it a go!
Click to expand...
Click to collapse
I am running to the exact same problem.
I have tried with USB Debugging off AND on, still no go. I think there's a problem with installing the drivers. Whenever I check the device manager, it still says the drivers weren't installed. I have tried installing the Google drivers. What do we do?!
Kandydish said:
I am running to the exact same problem.
I have tried with USB Debugging off AND on, still no go. I think there's a problem with installing the drivers. Whenever I check the device manager, it still says the drivers weren't installed. I have tried installing the Google drivers. What do we do?!
Click to expand...
Click to collapse
Need to get the drivers to install first and foremost. Even with USB Debugging on, I'm still able to pull down and change from charge only. Those drivers are key. I had to restart my computer before it was able to take the install.
rramey23 said:
Need to get the drivers to install first and foremost. Even with USB Debugging on, I'm still able to pull down and change from charge only. Those drivers are key. I had to restart my computer before it was able to take the install.
Click to expand...
Click to collapse
I'm able to get to the pulldown and change the setting from charging to MTP. Every time I do that, I get a window showing that I'm installing the drivers for Nexus 6P. Then it completes. I can do this over and over again. In the device manager, there's a little exclamation mark by the Nexus 6P and says these drivers weren't installed Code 28. I have exhausted Google to no avail!
Anyone find a solution to this?
Kandydish said:
I'm able to get to the pulldown and change the setting from charging to MTP. Every time I do that, I get a window showing that I'm installing the drivers for Nexus 6P. Then it completes. I can do this over and over again. In the device manager, there's a little exclamation mark by the Nexus 6P and says these drivers weren't installed Code 28. I have exhausted Google to no avail!
Anyone find a solution to this?
Click to expand...
Click to collapse
You chose to install the drivers manually instead of having the system do it for you? Right click the yellow exclamation .. update drivers .. allow me to pick .. choose the download file location see what that gives you.
zosimov21 said:
You chose to install the drivers manually instead of having the system do it for you? Right click the yellow exclamation .. update drivers .. allow me to pick .. choose the download file location see what that gives you.
Click to expand...
Click to collapse
When I choose the location, I see a bunch of options. The most relevant ones are ADB Interface and Android Device. Under Android Device there are several more options such as Android Adapter Interface, Android Bootloader Interface, and the such; no mention of MTP.
Kandydish said:
When I choose the location, I see a bunch of options. The most relevant ones are ADB Interface and Android Device. Under Android Device there are several more options such as Android Adapter Interface, Android Bootloader Interface, and the such; no mention of MTP.
Click to expand...
Click to collapse
Did you already download the google USB drivers?
Should just be able to choose the android_winusb.inf driver. It should allow MTP
zosimov21 said:
Did you already download the google USB drivers?
Should just be able to choose the android_winusb.inf driver. It should allow MTP
Click to expand...
Click to collapse
I have downloaded them. How do I specifically choose just that file? When I go through updating the driver, it asks for a folder location.
Go to dev options, switch the USB from ptp back to mtp and it works for me
xxsashixx said:
Go to dev options, switch the USB from ptp back to mtp and it works for me
Click to expand...
Click to collapse
Tried. Keeps trying to install the MTP drivers and it won't go through.
I was having the same issue with my computer not detecting the my phone storage but then i remove the drivers from my samsung in the device manager and then right away detect my nexus 6p, no only i can see the storage but if i select how i want to connect (MTP, File trinsfer) it will change the connection type and folder
MTP - shows the pics folder
File transfer - it shows the storage
Sweet
bartendersimon said:
I was having the same issue with my computer not detecting the my phone storage but then i remove the drivers from my samsung in the device manager and then right away detect my nexus 6p, no only i can see the storage but if i select how i want to connect (MTP, File trinsfer) it will change the connection type and folder
MTP - shows the pics folder
File transfer - it shows the storage
Sweet
Click to expand...
Click to collapse
I don't have any other drivers from any other devices. This is a clean install of Windows 8.1. I've only tried connecting my 6P, my OG 6, and my 9. All have the exact same problem.
Kandydish said:
I don't have any other drivers from any other devices. This is a clean install of Windows 8.1. I've only tried connecting my 6P, my OG 6, and my 9. All have the exact same problem.
Click to expand...
Click to collapse
You might wanna try installing Huawei Drivers and see if that help
HiSuiteSetup_2.3.55.1.zip
http://download-c.huawei.com/downlo...loadId=16205&version=90864&siteCode=worldwide
bartendersimon said:
You might wanna try installing Huawei Drivers and see if that help
HiSuiteSetup_2.3.55.1.zip
http://download-c.huawei.com/downlo...loadId=16205&version=90864&siteCode=worldwide
Click to expand...
Click to collapse
I installed that application and I was able to see my device, the apps, the contacts, everything. EXCEPT I wasn't able to access the device from Windows Explorer which means I am not able to transfer files.
Kandydish said:
I installed that application and I was able to see my device, the apps, the contacts, everything. EXCEPT I wasn't able to access the device from Windows Explorer which means I am not able to transfer files.
Click to expand...
Click to collapse
So when you change the option in the phone from charging to file transfer, did you check the device manager to see if there any unknown device showing somewhere?
bartendersimon said:
So when you change the option in the phone from charging to file transfer, did you check the device manager to see if there any unknown device showing somewhere?
Click to expand...
Click to collapse
Changing it from charging to MTP shows a MTP device in Manager with a yellow exclamation mark next to it. When looking into the details, it says that no drivers are installed. When I try "Updating Drivers", it says "Windows failed to install drivers. Code 28" or something along those lines. Code 28 MEANS that Windows failed to install drivers.
Thanks for nothing Microsoft.
Nexus 6p Connection to PC Issue - This Helped!
I had similar problems with PC not recognising my Device. I found http://www.technobuzz.net/install-google-nexus-6p-usb-drivers/ which helped me solve my issues.
1. Downloaded and installed the Huawei Nexus 6p drivers. This installed a Huawei Task Manager which connection to pair was still not recognisable.
2. Deleted old drivers (acer, samsung, htc) from' Device Manager'. This actually helped PC recognise my device which showed up in the Device Manager>Other Devices>Nexus 6p, also in PC interface but once moved off charging to MTP, computer didnt recognise device.
3. Downloaded and installed the adb/fastboot installer. Followed instructions till step 10. My screen didn't show anything like Andoid ADB interface, it displayed MTP file install, which I installed. Just remember to refresh in My PC interface when changing over from charging to MTP, sometimes Nexus 6p will be hidden.
4. Uninstalled the Huawie Task Manager.
This has solved my problem with PC and Device connection. The instructions given are from what I can recall of the process I went through.
Credit to Sidharth Rathore from Technobuzz for this solution.
Hope this helps.
Later.
p.s. I have a windows 10 laptop if this helps.
bartendersimon said:
I was having the same issue with my computer not detecting the my phone storage but then i remove the drivers from my samsung in the device manager and then right away detect my nexus 6p, no only i can see the storage but if i select how i want to connect (MTP, File trinsfer) it will change the connection type and folder
MTP - shows the pics folder
File transfer - it shows the storage
Sweet
Click to expand...
Click to collapse
I was having the same issue until I uninstalled some other debugging drivers I had installed. So I would recommend crawling through your installed apps for any other android usb drivers and uninstalling them if you still have this issue.
Working on mine right now. Found that USB 3.0 ports will not recognize device. Once plugged into a 2.0, it is recognized. Might help your issue