[REF] Hardware Buttons Combinations - Liquid S100 Android Development

Here are the differents buttons combinations for Acer Liquid :
Hard-Reset
Code:
Volume up / volume down + power button
FastBoot / BootLoader
Code:
1. Remove battery and replace battery.
2. plug in PC-connected USB cable
3. Camera button + "<" then Power.
Recovery
Code:
1. camera button + Volume down + Power button --> phone vibrates shortly 2-3 times
2. press < + camera button + power button
Inspired by Paul's @ modaco thread.

Hi,
Are these limited to Liquid, or do they work on other Acer devices? For example: Acer Stream?
Thanks

Related

Power on in fastboot mode [N7 3G]

Hi guys. I just bought a new nexus 7 3G and I want to launch it in fastboot mode to use root tool. But I read in all tutorials that If I want to power on my device in fastboot mode I have to press Vol UP+ Vol Down + Power. But if I press these 3 buttons nothing happens, while if I press only VOL DOWN + POWER ON my device turns on in fastboot mode.
So I ask you: Is it normal???
Correct. It's Volume down + power.
The 3 button mash is more of a simulated battery pull.
regalpimpin said:
Correct. It's Volume down + power.
The 3 button mash is more of a simulated battery pull.
Click to expand...
Click to collapse
So I have to press it only to reset my tablet if it is freezed, right? I don't understand why all tutorials write that, I was becoming crazy

RAZR HD Charging when fw not work or bootloop

Ok, it's look like i've found how to charge phone when fw not work, maybe bootlooping & etc without disassembling phone & factory cable:
1) get your wall charger and plug it to the phone & rosette
2) Hold down power, vol + & vol - keys to get in the Boot Options Menu
3) Use vol - key to navigate to the "BP Tools" and press vol + to select. it start booting and then display the battery and start charging. Enjoy! :good:
maks.xt925 said:
Ok, it's look like i've found how to charge phone when fw not work, maybe bootlooping & etc without disassembling phone & factory cable:
1) get your wall charger and plug it to the phone & rosette
2) Hold down power, vol + & vol - keys to get in the Boot Options Menu
3) Use vol - key to navigate to the "BP Tools" and press vol + to select. it start booting and then display the battery and start charging. Enjoy! :good:
Click to expand...
Click to collapse
Nice, dude! This can save many ppl! =p

How to get Recevory Menu ?

How to get Recevory Menu (pre boot menu) to delete data and Cache in Lenovo Phab 2 plus ?
I have tried the following key combinations but no progress,
1. Power key+ Volume Up and hen let go of Power key when you see the LENOVO logo on the screen - NO MENU
2.Power key+ Volume UP +Volume Down - NO MENU
3. Power key + Volume Down - RESET MENU (Chinesese language)
I've got answer:
Turn off the phone
Press and hold Power key+ Volume UP +Volume Down
after 3-5 seconds release Power key
and when recovery appears release Volume UP+Volume Down
petrmatula said:
I've got answer:
Turn off the phone
Press and hold Power key+ Volume UP +Volume Down
after 3-5 seconds release Power key
and when recovery appears release Volume UP+Volume Down
Click to expand...
Click to collapse
CANT SUCCESS...................................
Did as you told but not success
Try this
Turn off the phone
Wait about 15 seconds
Press and hold Power key+ Volume UP +Volume Down
nearly immediately release Power key
and when recovery appears release Volume UP+Volume Down
Recovery:
1. Power OFF
2. Press and hold VOLUME + and VOLUME -
3. Connect the USB cable (from the charger or PC)
4. After launching the recovery release the buttons and disconnect the cable. On the screen there will be the inscription "no command"
5. Press and hold POWER and one press VOLUME +
6. The android and "no commands" icon will disappear, and after a couple of seconds the standard recovery menu will be displayed
7. For navigation, use the volume buttons, to select - power

Root not working on One UI 3

Has anyone managed to boot into magisk mode on one ui 3? Power + bixby + vol up doesn't seem to be working anymore.. I also tried with the USB method but still no luck..
Recovery Mode UI 3.0
1. Turn off the device,
2. Connect the phone with a USB cable to the computer,
3. We wait until the screen showing the start of charging and the percentage of the battery appears,
4. Press the Volume + button and then the power button and hold both buttons until the device turns on -For older devices, such as Galaxy S10, it is required to hold the Volume +, Bixby and power buttons
grzegorz354 said:
Recovery Mode UI 3.0
1. Turn off the device,
2. Connect the phone with a USB cable to the computer,
3. We wait until the screen showing the start of charging and the percentage of the battery appears,
4. Press the Volume + button and then the power button and hold both buttons until the device turns on -For older devices, such as Galaxy S10, it is required to hold the Volume +, Bixby and power buttons
Click to expand...
Click to collapse
I can enter recovery mode just fine, the problem is that I'm not being able to boot into root (magisk) mode anymore after the update. Vol up + bixby + power (and USB) is only taking me to recovery mode now.
So far TWRP doesn't support android 11. Maybe the next version will support it.
I'm in the exact situation. I think nobody understood the question. He wants to boot into MAGISK MODE (Root) which some time ago it was made by pressing vol + + bixby a couple of seconds then releasing both buttons at the same time.
Now with UI3 we are left with recovery using USB cable or normal mode but no MAGISK.

Download Mode From 3.0 beta 3

Can anyone know the procedure for getting download mode in one ui 3.0 beta 3 installed device
It changed with One UI 3
Volume up+down and usb... without cable I don't know. (Version 2 from below)
From Sammobile.com:
Reboot your phone in Download / Odin mode (make sure your device is off) with the following button combo: POWER + VOLUME DOWN + BIXBY
Other options in case first option did not work or isn't possible.
Option 2 VOLUME DOWN + VOLUME UP then USB cable
Option 3 POWER + VOLUME DOWN + VOLUME UP
Option 4 POWER + VOLUME DOWN + HOME BUTTON
Option 5 (Note9) USB cable + VOLUME DOWN + BIXBY
Option 6 (Note10) POWER + VOLUME UP
As I know you should press volume down + Bixby while connecting to the computer.
yeah it worked .. thank you so much

Categories

Resources