My computer will say the driver's are installed, but when I go under my computer to move files, there is no drive listed for my phone. Whats going on here. Using a new hp computer with windows 7. Any help here would be nice.
I have also check the device manager, It is listing it as a t-mobile slide, bla bla bla so I un-installed and re-installed, still no luck, How or what am I doing wrong that the computer isn't listing this as a drive so I can move files?
when you plug phone in, a notification should apear on phone, pull down top bar and see what the USB symbol says next to it, if it says anything other than disk drive then go to settings>connect to pc>disk drive and then hit done
I do not have a usb thing pop up n my phone n the setting are right under the phone
it should be a notification in the notification bar, if you are not getting the notification then you may have a bad port on the computer, is the phone charging when you plug it in?
Try replacing the USB cable if you plug it in and charge light doesn't turn on.
nope, tryed different ports, all are reconizing that the phone is plugged in n the phone charges
Ok, I'm going to try a different computer, I tryed here at work, the computer started installing but I needed admin rights to install hardware so I guess I will try later
Stupid question, but have you tried: from the home screen, if you go to Menu > Settings > Connect to PC, Default connection type, try setting it to Disk drive...
Yes and I have tryed turning it to sync with the program I downloaded from htc, nothing. Now when I plugged it in last night, I noticed that I plugged it into the sata port but it still regonized the phone, deleted the driver n re installed by actually using the usb port but still nothing. So I just tryed my older laptop n it installed the driver, said t mobile slide, phone was chargiing but I still ddnt have the usb pop up on my phone.
I am starting to think somthing is wrong with the phone
Ok this is weird. I used a older laptop with xp n everything works fine. What should I do or download for win 7 to work properly
Related
this is my problem,
when i connect my hd2 it charges but the computer doesn't recognize it. on the phone settings it is set to active sync. i also have 2 computers; xp and vista, both do the same thing.
i could careless about active sync, i just want to plug my phone into my pc and transfer files in and out. ive also tried the disk drive option but still no go?
if i enter bootloader and plug it in it recognizes the usb setting but when the phone is normal, it doesn't??
it did this with the stock rom and its also doing this with nrg titanium rom.
any help would be appreciated
Same thing here.
It charges through USB but it doesnt connect.
If i choose the storage option it works fine.
I want to sync my outlook and i cant...
What the heck...?
i know this may seem a bit "it helpdesk-ish" but try re-booting your PC
Come on... give something drastic!
Already done that, rebooted the pc and the hd2...
still nothing
djchubbs said:
i know this may seem a bit "it helpdesk-ish" but try re-booting your PC
Click to expand...
Click to collapse
believe it or not i have done that mannyy times and did alot of device manager things to try and let both computers recognize the hd2 but still nothing haha..
ive had previous hd2's and they've all connected fine untill this one, maybe its this specific one thats giving me trouble. but regardless, it charges via usb then it should be able to recognize it
Check the active sync settings to ensure that usb connections are enabled. You can tell be looking at the system tray icon - there's a read circle with a white X in it if USB is disabled.
Saying that though, if it doesn't even recognise it when the device is in USB mode, I'd try a different cable. It's perfectly reasonable that the cable could power the device but not fully facilitate a USB connection.
johncmolyneux said:
Check the active sync settings to ensure that usb connections are enabled. You can tell be looking at the system tray icon - there's a read circle with a white X in it if USB is disabled.
Saying that though, if it doesn't even recognise it when the device is in USB mode, I'd try a different cable. It's perfectly reasonable that the cable could power the device but not fully facilitate a USB connection.
Click to expand...
Click to collapse
but the thing is when i go into bootloader it recognizes it as usb and i can add customs roms and such. just not when the phone is normal weird ?
k20a1 said:
but the thing is when i go into bootloader it recognizes it as usb and i can add customs roms and such. just not when the phone is normal weird ?
Click to expand...
Click to collapse
That is very weird. Sorry mate - never heard of it doing that for anyone before.
Make sure you have the mobility center/active sync program installed on your computer. Without it it won't work.
On Vista or Seven, with the HD2 plugged in, you can find the program/drivers by launching and refreshing manually Windows Update. On XP you have to do that manually.
Good luck.
This happens to me often. In my case I have found it to be a weird driver issue. Go to device manager and look for the yellow triangle. Right click and update driver software. This worked for me I hope it helps.
bit late but just flashed maxsence and i love the look, but have allready had to restart by phone 10 times in 10 minutes. I'll wait for the next release. back to GTX for now.
Good work NRG. keep it up.
this is one of the many WM6.5 errors!
need Android soon!
Ok here we go.
The phone did not connect through activesync to my pc. When i selected to connect as mass storage it connected.
I checked for driver issues in device manager but nothing came up.
I checked the hd2's activesync. Bingo! the activesync was crashing when i was running it. I had to hard reset the phone.
Now it works fine.
My guess is that maybe a program that i installed recently was buggy and created this particular problem. Unfortunately i have about 50+ programs installed (including themes etc) and i m not sure which one it was.
I was installing all the programs again today one by one and after the install process was completed i connected the hd2 to usb to find which app was the problematic one.
After installing almost(some were found useless) all of the apps (here is the crazy part) the hd2 still was connecting through activesync....
HTC will drive me nuts...
Anyway the phone now connects correctly.
I cant understand which was the problem....
as odd as it may sound i think i figured it out.
i think its the usb cable that im using, i have to wiggle it around for it to connect to active sync but once it connects its not a stable connection as it cuts in and out.
but charging capabilities work though!
pos wire, i ordered a new wire and if that one fails also, i will have to get my hd2 replaced for faulty usb port
thanks for all the replies much appreciated
@k20a1
Try to hard reset the phone.
It worked for me.
If not again, then use your warranty!
angelossssss said:
@k20a1
Try to hard reset the phone.
It worked for me.
If not again, then use your warranty!
Click to expand...
Click to collapse
i did whenever i custom rom'd it, it still does the same thing. yes it will connect via usb while in bootloader but will not during regular phone operations lol
"Disk drive" mode not working with XP laptop
HD2 is working fine with my desktop, but wit laptop I can only use ActiveSync to browse files.
When I connect the USB cable I get:
"Found new hardware wizard"
but it tells me that it Cannot Install This Harware - Disk Drive
"An error occurred during the installation of the devie The system cannot find the file specified"
And I only have "Finish" to click - if I click it the wizard lunces again immediately and goes on and on with no end.
HD"/Leo does not appare in Disk Manager (I know ablut the drive lettering issue)
I'm sure its my XP issue, but I havent found drivers to fix that, and I'm not about to reinstall XP on my lappy in near future.
Transfer files - Solved
;
k20a1 said:
this is my problem,
when i connect my hd2 it charges but the computer doesn't recognize it. on the phone settings it is set to active sync. i also have 2 computers; xp and vista, both do the same thing.
i could careless about active sync, i just want to plug my phone into my pc and transfer files in and out. ive also tried the disk drive option but still no go?
if i enter bootloader and plug it in it recognizes the usb setting but when the phone is normal, it doesn't??
it did this with the stock rom and its also doing this with nrg titanium rom.
any help would be appreciated
Click to expand...
Click to collapse
I share the same here and I was despaired of trying to solve it with any logical, as well with illogical, measures. Such as: rebooting, changing usb cables, reinstalling activesync 4.5, etc.....etc...blla..blla...blla...
However, I solved the "Transfer files issue" by taking out the sd card from the HD2 and connect it with an external cards reader to my pc.
The card reader connected and works with the same usb cable that does not work with the HD2.
That way I load it with all files and in the same occasion I reload into my computer the daily spb backup files.
However, I have the feeling that the reason for that problem is a missing file/driver named: "Setup1.SPL" in the pc windows operating system.
In order to solve that it seems that only reinstalling windows on my pc will be the solution which defiantly do not like.
hey guys.
i just tried copying an avi file from my pc to the phone. i had already selected Media device (USB 3.0) in the pull down menu.
first it disconnected as it had initially first connected via Media device (MTP) and then reconnected and brought the auto play dialogue up. after a few seconds it disconnected itslef again and then reconnected. it seems to randomly want to disconnect and reconnect when it wants to.
even while it was apparently still reconnected, i tried to copy a file over to it and it first said i might not be able to play the file did i want to copy it anyway, i clicked yes, then it says the device has either stopped responding or has been disconnected even though it still appears to be connected.
if i switch back to MTP it still warns about maybe not playing the file but then after clicking to still copy across, it copies fine.
i am running windows 7. i have used this usb 3.0 port fine with a usb thumb stick i have. also, windows says it has installed the device successfully when i click over to usb 3.0.
so.... any ideas why it randomly wants to dis/re connect? and why will it not copy across even when it appears connected?
thanks guys.
marc.knuckle said:
hey guys.
i just tried copying an avi file from my pc to the phone. i had already selected Media device (USB 3.0) in the pull down menu.
first it disconnected as it had initially first connected via Media device (MTP) and then reconnected and brought the auto play dialogue up. after a few seconds it disconnected itslef again and then reconnected. it seems to randomly want to disconnect and reconnect when it wants to.
even while it was apparently still reconnected, i tried to copy a file over to it and it first said i might not be able to play the file did i want to copy it anyway, i clicked yes, then it says the device has either stopped responding or has been disconnected even though it still appears to be connected.
if i switch back to MTP it still warns about maybe not playing the file but then after clicking to still copy across, it copies fine.
i am running windows 7. i have used this usb 3.0 port fine with a usb thumb stick i have. also, windows says it has installed the device successfully when i click over to usb 3.0.
so.... any ideas why it randomly wants to dis/re connect? and why will it not copy across even when it appears connected?
thanks guys.
Click to expand...
Click to collapse
Make sure you have the latest Samsung USB drivers on your PC. If you think you do, I would go to the device manager and uninstall your phone from the device list and then let it reinstall the drivers. Downloading Kies 3 also installs the drivers on your PC.
mvansomeren said:
Make sure you have the latest Samsung USB drivers on your PC. If you think you do, I would go to the device manager and uninstall your phone from the device list and then let it reinstall the drivers. Downloading Kies 3 also installs the drivers on your PC.
Click to expand...
Click to collapse
thanks mate but i have already tried them.
it does charge fine so i'm not sure whether it is a power issue but the issue of it disconnecting must have something to do with not transferring anything over even though it still appears connected when i am trying.
i read somewhere that due to it's quicker data transfer, the pc and device need to send much quicker signals to each other to let them know that they're still attached. by using an extension lead inbetween the device and usb 3.0 socket i was delaying that signal sufficiently to make the pc keep thinking the phone wasn't attached anymore. i removed the extension lead and sure enough it copied across fine.
the odd thing is that both a usb thumb drive and my 2tb backup external HDD work fine over the extension. maybe the note 3 is slower at sending that signal to start with? dont know but it now works.
Hi, I have been rooting and ROM-ing my LG E400 for a while now, and I have come across a problem.
It seems I have accidentally deleted my usb driver on my phone, so when I connect my phone to a computer it charges, but i cannot access the phone through the computer in any way.
Can anyone help???????
I think you can select what your phone has to do when connected to an USB somewhere in the settings. Make sure to let your phone connect as a media device, because that way it'll give you access to its internal and external SD card. Also, if you have a PIN/password lock screen, you need to unlock your phone after you plug it into the USB otherwise it won't give you access.
TahaX said:
I think you can select what your phone has to do when connected to an USB somewhere in the settings. Make sure to let your phone connect as a media device, because that way it'll give you access to its internal and external SD card. Also, if you have a PIN/password lock screen, you need to unlock your phone after you plug it into the USB otherwise it won't give you access.
Click to expand...
Click to collapse
I have searched every crook of my phone but there are no usb options available. They used to always pop up when I plugged in the usb, but they are unaccessable to me. When I plug it into a computer, the computer does not even recognise it as a connected device. This has happened with every computer i have connected it to.....
NathanCrowe said:
I have searched every crook of my phone but there are no usb options available. They used to always pop up when I plugged in the usb, but they are unaccessable to me. When I plug it into a computer, the computer does not even recognise it as a connected device. This has happened with every computer i have connected it to.....
Click to expand...
Click to collapse
Go to "Settings" the choose "Storage" click on the left touch surface (the square next to the arrow) the choose USB connection (or someting like that) then enable "usb storage".
Good Luck :good:
try to download and then install DRIVERS of your phone in your computer maybe the DRIVERS are missing in your computer
Hi everyone,
This is my first post about my Note 4, and I'm really frustrated.
All I wanted to do was transfer some music to the SD card on my phone, and I've just wasted the entire evening and have nothing to show for it.
I'm running Windows 8.1 on my PC and Android 5.0.1 on my Verizon phone. When I connect via USB, a popup in the system tray says that it has identified a Samsung File-Stor Gadget USB Device and assigns it drive letter F:.
However, almost instantly, Windows decides that my phone is a modem! USB Safely Remove and Device Manager both call it a Samsung Mobile USB Modem, and Explorer does not show a drive F:.
The Notification dropdown displays "Connected as a media device", and when I tap on it, I can see that "USB computer connection set to Media device (MTP)" is checked.
I installed the latest version of Samsung Kies on my PC and ran it, but it fails to connect to the phone.
Can anybody tell me what's going on? Thanks!
P.S. Ironically enough, even though I can't do anything, I can't stop the device because adb.exe has the connection locked!
Card reader is less hassle. Cables as you know are unstable at times.
I would try going into Device Manager (or maybe Devices and Printers) in the Control panel, right clicking your device and uninstalling it.
Reboot and let Windows detect the device again when your reconnect the phone.
0-0-0 said:
I would try going into Device Manager (or maybe Devices and Printers) in the Control panel, right clicking your device and uninstalling it.
Reboot and let Windows detect the device again when your reconnect the phone.
Click to expand...
Click to collapse
Good idea, but I checked and it wasn't there. When I connect, a new Modems entry is created in Device Manager, but when I disconnect it disappears.
I might have to go w7excursion's route. Thank you both for your suggestions.
Just recently i tried to transfer for the first time, some wallpapers to my phone, and when i plug in the usb, the phone starts to charge normally but i cannot figure out why i cant transfer files from pc to phone or vice versa.
When i plug it in, it gives me the option to select what to "Use USB for", but when i select either MTP (file transfers) or PTP (transfer photos or files), nothing happens. I cannot browse the phone to pick anything at all.
When i go to device manager on PC i see under Portable devices the name of my phone (Moto G4 Play) but it has an exclamation point next to it. I have tried to uninstall and re-install or even update the driver but it will remain this way (if i click its propierties it tells me "This Device cannot start. Code 10"
Is there anything else i can do either on my phone or pc to make this work?
Other info:
Already downloaded motorola device manager to see if it would help but nope.
My PC OS is windows xp (yeah, i know... :laugh
My PC OS is windows xp
Click to expand...
Click to collapse
That probably explains everything
I don't think there are compatible drivers for Windows XP..
Long term support for WinXP ended three whole years ago. Though what I noticed with CM and Lineage is that the first time the phone is set up, it won't enable MTP even if checked. You have to reboot the phone and then MTP will actually enable properly.
Also, it may happen with 3rd party cables too. I myself faced this issue with Boat Indestructible cable, then I used the original cable that came with phone and successfully done it. But I still can't understand, how that cable can transfer data to/from other phones....
Just another bit of info:
Today while trying to make it work, i updated the driver from the Device Manager again and somehow i could access the phone as intended.
The problem is that after a few seconds, the window closes on its own! Then i have to redo the whole process and It gives me access again but every time, after a few seconds, the browsing window closes on its own!
I have tried with other cables and no dice, tried also rebooting phone and pc and also tried plugging it to all available usb ports. Any other tip or method i can try?
Try another pc to discard things (so you know if it's the pc or the phone)