Related
hi ppl
i use an austrian mda2 w/ ROM 1.6.00GER and ExtROM 1.60.07 together with a parrot ck3000 handsfree in my car.
i use the original bt stack w/o ANY changes.
making calls and taking calls is no problem at all and works most of the times.
the problem is as follows: when i enter the car, bt turned on, and also profile says "BT Headset ist eingeschaltet (means bt headset is turned ON)", and the n i want to place a call, the call is not routed over the handsfree. explanation is simple: when i change back to "today" - bt is turned OFF !!!
so my conclusion: everytime bt is used for the first time after disconnetion from the handsfree, it just turns OFF when it should connect. after i turn bt on by hand again it works w/o any problem. ('till i come back to the car of course - and everything starts again)
this is very annoying....
so has anyone any hint what to do? i wouldn't really mind updating to an english rom - if i just knew that that does work.
thanks,
servus ize|man
when i use this one
http://bluetooth.i-networx.de/index_e.html
my device turn bluetooth on when i call even though i dont have a bluetooth headset maybe it'll help you
thanks rudegar
i know that stack by TOWA. unfortunately that does not work at all here
i'd love to use it, but w/ this stack my handsfree is reconized sometimes, sometimes i have to pair the devices every time i start my car, and i can NEVER place calls with the combination mda2 with networx bt manager installed.
maybe someone has the same experiences and can report them
servus ize|man
...this guy got it working so it's possible.
http://msmobiles.com/news.php/4679.html
I received my HT-820 this morning.
I followed this guide and have successfully listened to music over the headset.
I've also recorded a voicemail message so the phone function seems to work.
Hello.
I got my Qtek S110 to work with the Motorola HT 820 too, but I have some problems.
- there are glitches in the playback. I think due to the fixed 195kbps connection rate (the device must transform the music played).
- I have more gitches and stops when the bitrate of the music is over 195 kbps.
- if I turn the audio redirection and auto mute on then I can not hear anytheng (eg. ringtone) when the headset swithed off. I have to manually turn off the redirection.
- the redirection only works with MS Media Player.
Is there any idea to solve this issues?
h2oo2h said:
Hello.
I got my Qtek S110 to work with the Motorola HT 820 too, but I have some problems.
- there are glitches in the playback. I think due to the fixed 195kbps connection rate (the device must transform the music played).
- I have more gitches and stops when the bitrate of the music is over 195 kbps.
- if I turn the audio redirection and auto mute on then I can not hear anytheng (eg. ringtone) when the headset swithed off. I have to manually turn off the redirection.
- the redirection only works with MS Media Player.
Is there any idea to solve this issues?
Click to expand...
Click to collapse
If you read the HT820 quickk start guide,
http://www.motorola.com/mdirect/manuals/QG-HT820HdPhns.pdf
It says that "Note: You may need to wait several seconds before
hearing music in the headphones while the devices
connect."
This is why the first few seconds of the song/track are skippy. If ther are ever connection problems, the same thing happens midway through the song.
When you turn the headphone off, you need to turn the bluetooth audo settings off as well.
These issues make me believe that this patch/update is only a beta/test version and not the real thing, especially as the Bluetooth on the HT820 is done by the same people that made this patch (CSR)
http://www.csr.com/pr/pr210.htm
Still the patch is an advancement for the Magician. Just have to work around it
quick question to ht820 owners,
can you tell me if you can use these headphones for voice dial?
bluetake bt450 cannot, you have to dial via phone, then headset can be used to hangup.
thanks
in advance
aliendad said:
quick question to ht820 owners,
can you tell me if you can use these headphones for voice dial?
bluetake bt450 cannot, you have to dial via phone, then headset can be used to hangup.
thanks
in advance
Click to expand...
Click to collapse
I would answer that question but I've never used voice dial. is that what Microsoft Voice Command is used for?
What I CAN tell youthough, is that on the second page of the manual, it tells you how to "make a voice dial call"
http://www.motorola.com/mdirect/manuals/QG-HT820HdPhns.pdf
thanks for the reply,
reading the instructions in "make call" first instruction says "hold button then speak after tone"
bluetake doesn't have that function
thanks again
two final questions, if you don't mind,
are they supplied with audio cable to use with non bluetooth music player?
and is the audio quality good or great or just ok?
thanks again again
aliendad said:
two final questions, if you don't mind,
are they supplied with audio cable to use with non bluetooth music player?
and is the audio quality good or great or just ok?
thanks again again
Click to expand...
Click to collapse
I don't mind.
Yes, there is an audio cable that will connect the headset's 2.5mm socket with a regular 3.5mm one.
The audio quality is as good as I've heard. Any audio problems you get with the PDA will be due to the bluetooth patch which I believe is still experimental.
The HT820 works very nicely particularly if the Magician is tweaked with Pocket Hack Master. The skips are barely noticeble and the lag at the beginning of each track is minimised. Voice Dialing works flawlessly with Cyberon Voice Speed Dial...the HT820 mic relays the command to the Magician...BUT...same issue with MVC...you don't hear the voice command relayed from the Magician back to the headset.
The one thing that I have not been able to work is the "resume playback after a phone call" even with the option ticked off in /menu/options/playback in Windows Media Player. Everytime I answer a call or make a call, WMP reverts back to the default Library opening screen. I've read in the other thread that others have had it working the way it should.
Any ideas?
shanghaishah said:
The HT820 works very nicely particularly if the Magician is tweaked with Pocket Hack Master. The skips are barely noticeble and the lag at the beginning of each track is minimised. Voice Dialing works flawlessly with Cyberon Voice Speed Dial...the HT820 mic relays the command to the Magician...BUT...same issue with MVC...you don't hear the voice command relayed from the Magician back to the headset.
The one thing that I have not been able to work is the "resume playback after a phone call" even with the option ticked off in /menu/options/playback in Windows Media Player. Everytime I answer a call or make a call, WMP reverts back to the default Library opening screen. I've read in the other thread that others have had it working the way it should.
Any ideas?
Click to expand...
Click to collapse
Where can I get this pocket hack master?
I did't change any of the settings and mine automatically resumes playback after answering a call.
www.pocketgear.com ....cost 15 bucks.... worth it IMHO
download the trial and give it a spin... buy it if it works for you....
you'll be able to overclock or underclock your cpu speed and set certain fixed speeds for certain applications... I've found that different settings works best for different machines...tried it on three different Magicians with different ROMS and different applications... the settings that works best for my Jam and the HT820 are :
CPU between 260 to 520
Bus between 104 to 117
Ram between 52 to 59
LCD between 52 to 59
you've got to find what works for you... Not perfect mind you, but certainly a LOT better then without...like I said I barely notice the skips and depending on the CPU speed set, the delay at the front of each new track can be cut to a split second... all my tracks are at 192 kbps BTW... mow if only I can get the darn WMP to resume play after a call ... :evil:
I need help.. .please
Hi all,
I am new to this forum...and obviously not so bright on the settings etc of the XDAIIi of mine...for your info my XDA details are as below,
ROM version - 1.11.00 WWE
ROM date - 01/27//05
Radio version - 1.00.00
Protocol version - 1337.39
ExtROM version - 1.11.169 WWE
The way i look at your radio version and ROM version... they are far more bigger than the number that I have on my XDA.... is there any update link you can provide for me to improve my XDA???
Second Q is, I have bought the motorolla HT820 and i would like to have Stereo Bluetooth enabled on my XDA.. but i don't know the hows ...
Can someone please guide me through step by step....I would really appreciate it.... Many Thanks....
Re: I need help.. .please
mizou_takasyimaya said:
Hi all,
I am new to this forum...and obviously not so bright on the settings etc of the XDAIIi of mine...for your info my XDA details are as below,
ROM version - 1.11.00 WWE
ROM date - 01/27//05
Radio version - 1.00.00
Protocol version - 1337.39
ExtROM version - 1.11.169 WWE
The way i look at your radio version and ROM version... they are far more bigger than the number that I have on my XDA.... is there any update link you can provide for me to improve my XDA???
Second Q is, I have bought the motorolla HT820 and i would like to have Stereo Bluetooth enabled on my XDA.. but i don't know the hows ...
Can someone please guide me through step by step....I would really appreciate it.... Many Thanks....
Click to expand...
Click to collapse
Log-in to the forum and go here
http://forum.xda-developers.com/viewtopic.php?t=33532
Download the file on the 1st page.
Install it on the PDA.
Follow the steps on the top of this page.
This topic may be of interest to those who have the Motoroal HT820 bluetooth headset, and want to tweak music playback.
I prefer to untick "automute" so that I can hear the phone ring and can issue Voice Commands with MS Voice Command. Problem I was having, every time I opened Windows Media Player to stream music, it would blare out of the internal speaker as well. Here's the fix:
http://forum.xda-developers.com/viewtopic.php?p=226814#226814
I´ve installed the cab file and activated the "stream audio" option, my headset is registered and connected, but it is not available in the list of headsets where i checked the "stream audio" box. The list is empty. Maybe just working with stereo headsets ?
Hey all i've followed the prompts time and time again but i come up with the issue that once connected to the ht820 and i open windows media player to play a song the following error msg pops up:
"Bluetooth is turned off. Bluetooth audio has been disabled. Enable Bluetooth audio by turning on Bluetooth, then select Use Bluetooth audio again."
I switch bluetooth off and on and the same msg pops back up when i go to play a song!!!
WTF???
I'm thinking that because i've installed this hack and the other bluetooth hack and removed soo many times i might be in need of a hard reset!
Help so i dont have too PLEASE
djtwok said:
I´ve installed the cab file and activated the "stream audio" option, my headset is registered and connected, but it is not available in the list of headsets where i checked the "stream audio" box. The list is empty. Maybe just working with stereo headsets ?
Click to expand...
Click to collapse
Yes, just stereo.
There is a mono way though.
boh113 said:
Hey all i've followed the prompts time and time again but i come up with the issue that once connected to the ht820 and i open windows media player to play a song the following error msg pops up:
"Bluetooth is turned off. Bluetooth audio has been disabled. Enable Bluetooth audio by turning on Bluetooth, then select Use Bluetooth audio again."
I switch bluetooth off and on and the same msg pops back up when i go to play a song!!!
WTF???
I'm thinking that because i've installed this hack and the other bluetooth hack and removed soo many times i might be in need of a hard reset!
Help so i dont have too PLEASE
Click to expand...
Click to collapse
Make sure Bluetooth is on and the phone is not in flight mode.
If all else fails, backup your data (xbackup) and hard reset.
Hi
I want to know if the Motorola HT820 works with my Xda II following all the steps you say here?
I have ROM 2.20.07
Thanks
anyone got this working on the tytn
I use it with a Jabra BT250...
it used to work with my plantronics 320 on the wizard but wont work on the tytn is there any special settings you had to do
I also tried to make it works and it doesn't I assume that is due to the different headset plug.
Waiting for a version for TYTN
the prog will open a connection to the earpiece i can hear the static just wont forward any of the audio to it. works with the phone of course for making calls
I have the same problem with my Tytn (BTaudio seems to work because it stops the radio - I use it with a parrot car kit) but the audio still goes through the phone speaker...
did you find a solution?
gb
BTAudio On does not work, you have to turn it on via button press on the headset. BT Off works fine of course...
Rather annoying, but that's the way it is...
Sorry but I am afraid not to understand... the bt car kit is working properly and is paired to the qtek
could you please be more specific?
thks!
Sorry, you stepped into a rather cryptic response... I assumed you were talking about the file BTAudioOn.exe that worked on the 8125 but not the 8525/TYTN.
Search this forum for mono audio - there's a big thread. Also check the wiki.
attached. This cabs works great. To activate it, start playin music, then push and hold the button on your BT headset for about 1 second, it should beep and then music comes through. Only problem is you can't use MS VC through your headset, but it doesn't break VC.
BTaudio cab works
I have used the Gotland cab file and still had problems, until I began to think like a technician... Once I installed the cab file, I performed a soft reset and then repaired my Jabra JX10... It has been working fine ever since... I can hear music (either streaming or static) and voice... I have not tried tackling the voice commander problem though...
I have just upgraded the firmware on my headset using the software that is not posted on Jabra's site, but through a link in another post, I was able to do it... had to reinstall the Gotland cab again though.... May tackle Voice Commander later in the day... Who knows...
I'm using Bluemusic 2.0 and it worked with music to BT headset. Also using installed the BT VC fix cab in this forum at it worked fine with VC 1.6 - except incoming anouncements. ( Installation Hint: after installed both - you must delete existing device and then re-pairing the BT again).
I just made a thread, here http://forum.xda-developers.com/showthread.php?t=306363
I use a SonyEricsson Bluetooth Headset HBH-PV705 with the TyTN.
It works fine so far, when using the phone.
But I want also all sounds to be played via the headset, so that I can use Skype with the headset.
Therefore I disabled the voicedialing-software (Cyberon Voice Dial) with the BLUETOOTH VOICE COMMAND OFF Hack.
The Voicedialing does not start anymore, when I push the button on the headset and I can here, that audio is completly redirected to the headset.
However after 10 seconds the headset disconnects again and audio is played via the speaker again.
I tried several headsets already!
Does anybody have an idea whats going wrong here?
Thanks so much!
I haven't searched through hear yet, but I have a similar problem, just lasts longer then 10 seconds before it switches back. and for some reason voice command doesn't initialize (though i haven't tried the whole process again)
Does really no one know that problem? Does redirection of audio to a headset work on your TyTN?
BT stereo earphones & annoying voice command bug
Check this post:
http://forum.xda-developers.com/viewtopic.php?p=354050&highlight=#354050
ulischultz, I found the reg hack for voice command didn't work to correct this either. This BT/A2DP situation is a known bug, hopefully to be fixed with ROM update.
Hi guys can you make a test with the trial version of this software and se if it solves the problem:
www.teksoftco.com and download the trial version of BlueMusic from the product section. A detailed description on how to install and how to use it on the website.
Cheers,
Raul
That looks very nice, but does not have any effect!
After 10secs the sound is switching back to the speaker!
The problem is than at a lower level so i think it should be fixed with the next RUU .
This means that it worked on your tytn?( i mean that it routed corectly the voice)
Cheers,
Raul Tinca
No, it did not. It seemed to activate the headset somehow, because I was able to hear some noise, but the sound was still played via the speaker. Only after pressing the button on the headset, the sound was redirected, but only for 10secs.
Where can I get the RUU-Update, and how will I be informed about it, when it arrives?
"the sound was redirected, but only for 10secs"
this is what i wanted to hear
Seems like if they fix the bug in the rom the software would run on the tytn also (after pushing once the headset button - as presented in the help file there are devices that need it to be pushed and some that don't).
Cheers,
Raul
use the btagext.dll extracted from the dopod 9000 wwe ext rom and copy it over the original one in the windows dir, then soft reset...
That solved the problem for me.
topogigi: Where can I get that file? I will give it a try!
rain: I have a original HTC TyTN in german language! Is there any place where I can check for a new software by my self?
For btagext.dll you should give it a search here on xda-dev or ask an Dopod device owner to extract it for you.
For software the hardware configuration is not that much different from the Wizard or Prophet so any software that works on this device will have to work on yours also. pocketgear, mobihand, pocketland.de to give a few examples of websites where you can look for software and download free trial versions. There are also freeware websites. Just google as there are plenty of them at the moment
Cheers,
Raul
So is there anyone who can send me that file? So that I can test it?
Thanks very much!
Here it is...
Hi,
Am having the same issue, I copied over the file but it has not helped, were there any other files you copied over. (I did reset)
Cheers.
A solution is finally found!!!
http://forum.xda-developers.com/viewtopic.php?t=59918
Thanks for the post but I do not really think this is a solution to the overall issue. It may help in just listening to audio but it takes away some functionality, that being able to initiate voice command or voice dialling.
[EDIT]
Here is what I found;
Adding the DWORD string "VoiceCmdDuration = 86400" (86400 = 24hrs) under
HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand
passes the audio stream to the headset, for my issue where Voice Command was timing out on me before finishing what it was saying etc... this has worked fine, also, if not using Voice command a single press on the headset button passes Audio to it, second press disconnects.
I also changed this to value to 60 (seconds) after which the audio timed out and did not seem to start form zero again once initiated but I will need to test this some more. In the mean time I have entered some ridiculous figure to keep it running as I want, again, more testing and time will tell if this drains the battery any quicker.
I did NOT install BTAudioOn as mentioned in the other thread.
Hi cieplowski - how did your testing go? I got my V1605 on Friday and think I have the same issue with Voice Command. When I press & hold the button on my bluetooth headset it starts Voice Command and accepts my voice tag but almost immediately the sounds revert to the PDA speaker and I hear the response through the PDA and not my headset.
If your hack works and doesnt drain the battery then I'm extremly greatful
Thanks
Hi coe62,
Well, I used it over the weekend and it worked fine, I did not notice any abnormal battery drain etc....
Remember, all I have done is add
DWORD string "VoiceCmdDuration = 86400" (86400 = 24hrs) under
HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand
Nothing else, no additional programs etc....
This tweak works by basically not disconecting the audio feed to the headset until the button is pressed again or the set time runs out. I am pretty sure that the time set runs from a soft reset so I have left mine as a huge value, 6000000 (I think)
Other findings are;
After voice call the Audio stream swithces back to the phone, this is great for me as I do not have to remember to press the button again to disconnect it hence saving battery power on the headset itself.
TomTom passes all Audio to the headset also.
Let me know if it works on yours.
Hi cieplowski - no joy I'm afraid. made the reg change and then reset but after this the headset pairs ok but all commands still come through the V1605 speaker and not the headset.
Only thing I can think is that I used the wrong DWORD value - should it be a hex or decimal value ?
thanks
I've spent days searching and trying all sorts of tweaks but I can't get anything to work. Can anyone PLEASE help!
I use Tomtom 7 and I've always sent the voice instructions to the bluetooth speaker in my bike helmet (just a handsfree paired item). I've previously done this on HTC devices with BTAudio and a one line registry tweak. Can anyone offer a solution to send all the audio to a bluetooth handsfree on the HD2?
I really hope someone can help, I've got the HD2 setup just right except for this last remaining item.
Many thanks,
i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do
xardus said:
i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do
Click to expand...
Click to collapse
Yes I've tried the "manage system audio in handsfree device" option. I can get some background noise on the headsets (I'm trying with a Scala Rider and Motorola 700 & 850) but I never manage to get any sound.
Can anyone please offer a solution? It's a big disappointment for me if this isn't possible. Any suggestions welcome, many thanks.
My Observations
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....
Fadetogrey said:
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....
Click to expand...
Click to collapse
It gives me some hope that you've got it to work with one bluetooth device. Can you please let me know exactly what you did to get the $20 bluetooth earpiece to work?
Thanks,
yeah that was my idea but without a stereo bt device i cant try to myself...i ordered to vodafone one with some of my tons of points...3 weeks and no answer!
I had the same issue and on my old phone, the HTC Touch HD, I used the following program to my satisfaction:
BTAudio
On my HTC HD2 however this doesn't seem to work anymore. :-(
it does the same thing of the inbuild bt option on hd2 its just a "quick link" to place on the bar
anyone of u have any problem with bt device volume? before i have an Artemis and 3 different device i used the device volume was every time the one i choose...now every time a new call starts phone volume its right but device volume jump to minimum level and every time i have to press + button like as i'm playing videopoker to dont miss fist seconds of a conversation
Works fine with Jabra 3030, all audio over it, music, system sounds and calls.
Maybe it's only working for bluetooth devices that are setup as stereo. Can anyone please offer a solution here?
I've installed a 6.5 rom (dutty v7 - thank you) on my HD and after a sprite restore (level 2) bluetooth audio divert works fine. Although I notived that the bluetooth options remained the old settings (possibly due to my backup restore) and the divert was done using the BTAudio. Sorry to keep asking but if anyone can shed light on this.
Is it possible to tweak the HD2 so that audio can be sent to any bluetooth headset/handsfree or is there some hardware limitation that stops this from being done?
I've tried every app and tweak that I can think of! Please can anyone help, even iof it's to let me know why this can't be done.
Thanks,
its what we all are trying to do......now i think its only a bt device problem...if it support bt2.1 and a2dp with edr seems to work all good....
i solved in car with headphone in the box...but bluetooth should be much and much better without any cable that always have to remove nodes (its the right word? sorry if not hehe)
I'm connecting to my HD2 using Jabra Stone, an A2DP headset. When I selected the stereo headset profile on the HD2, it redirected all system sounds to the headset: reminders, SMS alert, soundtrack for videos, audio player....except phone ring. I used BT Audio over a non-A2DP headset before with Diamond2, but the ausio is very poor, and the connection drops very often. Since I changed to A2DP headsets, the Diamond2 and HD2 supports it out of the box - no hack needed.
So look for A2DP headsets if you want to redirect audio.
Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.
I have an LG HBM-220 bluetooth and cannot put audio to in, only phone calls!
How can i manage to do it?
I blame it on the stupid Widcomm Bluetooth stack... If the HD2 used the better MS stack, BT would play nice with with more of our periphirals and apps
I can't use MSVC properly with BT either....
the solution is to go to the bluetooth settings, select your device and connect the stereo audio connection.
Way back, Microsoft decreed that ONLY the phone app could use a mono BlueTooth headset, although any audio could be redirected to a stereo A2DP headset.
In order to get around this you need to fudge the sytem with something like BTAudio or TekSoft's BlueAudio.
The latter worked on my XDA Orbits (1 and 2) but does not work on my Touch HD with Dutty's R6 ROM (WM 6.5) possibly because BlueAudio requires the Microsoft BlueTooth stack and I suspect Dutty's ROM has the Widcomm stack. But I could be wrong about that.
BTAudio sort of works on my Touch HD, but outgoing audio is speeded up like I've been breathing Helium.
So no current solution to yet another idiotic gotcha from Microsoft.
Noony said:
Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.
Click to expand...
Click to collapse
Hmmm. When I conect via gprs to youtube aps I can hear the voice in my mono headset (jabra 2020) but via wifi and computer as modem voice is only in phone speaker. So maybe we should look gprs or youtube aps reg tweek.
Guys
i have a nokia HB-100 headset and i'm experiencing all kinds of strange behavours
sometimes system sounds including music ...etc get directed to the headset and some other time it just directs calls no matter how hard i try thru soft resets or unchecking then checking the "play system sounds ..." option!
very strange, any insights about this? is there a tweak to go with or is it a known WM defect?