Related
The btagsvc.dll on the Universal does exist, but it is empty (same with the HID dll). So that may be the reason why Audio Gateway is not working (getting the system sound forwarded to the BT headset).
Now, a friend showed me an interesting trick. Run a music file or any other program that outputs sound (like a navigation instruction from TomTom) and then press the Speed Voice Dial button.
Interesting, isn't it? So maybe all we need to do is prevent SpeedVoiceDial from exiting again?
Hey!!!!
A2DP is already there...just do a search :lol:
hdubli said:
Hey!!!!
A2DP is already there...just do a search :lol:
Click to expand...
Click to collapse
If you're talking about the M$ stack on the Universal, then you'll have to elucidate a bit more than that - unless you mean:
"The A2DP profile is introduced in AKU 2.0 of Windows Mobile".
But then isn't that scheduled for first quarter 2006. Even then, surely it's down to HTC to make it available for the badging suppliers, o2, T-mobile, etc., to decide IF and WHEN to issue the update.
I tried the LaunchAPEnable = 0 registry hack but it won't stick. My Jabra 110 headset would only receive the audio for a few seconds and then it would all fall back into the Xda Exec. I'll try another headset just to be sure but I'd have to agree - this seems far from being solved.
EDIT: indeed it works with another headset (Solteras Halo). Is the Jabra too agressive in it's power saving quest?
nice to see its doing you head in master :lol: :lol: the jabra bt250 is the same as is my logtech and motorola bluespoon 3-4 secs via voice dial and nothing
nice to see its doing you head in master :lol: :lol: the jabra bt250 is the same as is my logtech and motorola bluespoon 3-4 secs via voice dial and nothing
I've been using a bluetooth headset (Jabra BT-800) to listen to audio books just fine on the JarJar Universal. There are two ways (so far) to get it to work. One, if you install Microsoft Voice Command and use the registry hack found in this forum to make it the default via the Voice Dial button, run it, then let it cancel on its own, the BT audio connection stays intact for running regular audio through it.
The second (and free) way is to use a utility found in the I730 forum in pdaphonehome.com called BTAudioToggle. Written for the I730, it works on the Universal too. I imagine it will work on all the flavors of the Universal. Connecting your BT headset, followed by running this BT app will also activate the BT audio connection. Its pretty rock solid though its mono, not A2DP
Nice application but it only works for Universal for a few seconds. Then it returns to the device with the voice dial application activated.....
So, it seems that I have to disable the voice dial application. Anyone knows how????
Thanks in advance.
Cheers,
I tried the BTAudioToggle on the Xda Exec, and it doesn't seem to do anything .
@chris_khho: try a different headset. As I wrote the Solteras Halo was working fine with the registry hack but the Jabra 110 would only work for a few seconds. I'll need to check what profiles each of them suports.
RE
Hi!
BTAudioTogggle works on my QTEK 9000 for a few seconds when Voice Speed Dial is activated. Once Voice Speed Dial ends the music transfer stops
:roll:
Mine works fine and I've played my audio books for more than an hour and it never dropped. I'm not sure why it doesn't work for you guys. Maybe the reason the BTAudio hack works is because the MS Voice Command setup is installed and the BTAudio hack just makes use of it.
You know, now that I think of it, I have an I730 too and before the BTAudio hack came out, I was already using MS Voice Command to activate audio over BT. I think there's a (good) bug in Voice Command where VC does not release the audio stream if you activate it, then don't give it any commands. The BTAudio hack just made it easier to activate.
OK I see.
I tried this:
hklm\software\oem\voicecommand and set the value of "launchapenable" from 1 to 0
And it works with my i-tech clip s and jabra 258 (not sure the model no.), and WMP but it doesnt revert to BT headset after finished call....
Yes it is "mono" but its good though....just wait for AD2P..... Many people are working on it I think.....
Great People Great Work!!!!
Cheers,
Any more info on what each update fixes.
Of particular interest is the bluetooth patch????
Ok I see.
I tried this:
hklm\software\oem\voicecommand and set the value of "launchapenable" from 1 to 0
And it works with my i-tech clip s and jabra 258 (not sure the model no.), and WMP but it doesnt revert to BT headset after finished call....
Yes it is "mono" but its good though....just wait for AD2P..... Many people are working on it I think.....
Great People Great Work!!!!
Cheers,
_________________
Chris
Thanks Chris,
I have a o2 exd exec with the h500 and this works perfictly
Jeff
Is it possible to play music through a bluetooth headset? Not a stereo headset, just a normal, mono headset.
If so, does it automatically pause the music when you get a call?
yes you can using the bt audio software on http://www.htcwizardweb.net/system/files?file=btaudio.zip
download it unzip it and copy the folder to your storage card or your pda and enable or disable it at your convinience. hope i was helpfull
I tried that BT Audio app with the 750, and it doesn't work. I also tried every media player I could find...still nothing.
Has anyone had success with this theory working? I need it in a BAD way.
Here is a .cab file that does what you want it to do.
First activate your Bluetooth unit. Then stream your music or whatever. Then turn on the software. It works quite well.
Enjoy !!!
What I do for my 8125 is activate the BT toggling program and then Mortplayer. I tie the two programs together using MortScript and then activate a playlist through voice command by creating a shortcut into the Programs file.
usng bt headset with htc wizard with fafio crossbow
yes it is capable to do this i have wizard htc running clocking at 286 speed, tomtom mobile 5, with the jabra 2020 bluetooth earpiece all works great gps every single thing to do with sound comes through ear piece even key tapping try this program called btnav you can download it then allocate one of the the buttons to activate it as i do. my normal day using gps system intails switching on earpiece then wizard, pushing allocated button my earpiece beeps then start tomtom all works great then when at work i can listen to audio tracks aswell great little toy hope this helps
zcink said:
Here is a .cab file that does what you want it to do.
First activate your Bluetooth unit. Then stream your music or whatever. Then turn on the software. It works quite well.
Enjoy !!!
Click to expand...
Click to collapse
BEAUTIFUL THING
Bluetooth Audio
I've downloaded the bluetooth audio to my Samsung Blackjack II and installed it. I have tried several combinations of steps to get the music to play through my headset but I cant get it to work. Do you have any suggestions for me? Is there a specific bluetooth headset I need to get? Or did I just mess something up?
Hey thanks alot for this cab because I've been looking for this cab all over and finally you had the solution to my problem.....
I just installed that cab file and while it seems to function correctly by sending music to the earpiece on the phone, it does not send it to the BT device. The BT device acknowledges when the program is turned on and when it is turned off, but no sound is coming out.
I'm using a Blackjack2 and an Isymphony BT headset/speaker which is not stereo.
I just want to be able to hear my phone on my BT headset/speaker.
Is there some setting I'm missing? Does this program not work? Why for some and not others? Where can I find documentation? Who made that program?
Well, I dont know why you blackjack people are here(this being the Wizard forum and all!), but what I used to use on my Excalibur is the little shareware program called:BTAUDIO(link at bottom of post)
Its shareware in the fact that it only works for 30 minutes at a time, but it does indeed send ALL audio that the phone emits to your bluetooth headset.
Instructions:
1-Install BTAUDIO .cab to your phone
2-Activate your bluetooth headset, and put it in "find" mode
3-Goto your phones comm manager and turn Blueooth on
4-Now pair your headset with your phone
5-Start BTAUDIO
6-Follow the instructions on the screen and BAM, you are done!
I hope that helps!
DOWNLOAD LINK FOR BTAUDIO=
http://www.megaupload.com/?d=9MLLW0MC
Thanks for the reply.
I gave this program a try and it didn't seem to work either. I'm guessing it's a BlackJack problem. That download appeared to be pretty much the same thing as the other link to the "BTaudio" program by Triangle but is limited to 30 minutes, like you said. The first link was not limited to 30 minutes. (so you might want to check that one out)
As for why the Blackjack guys are coming here I'm guessing it's the same reason I found this place. A Google search.
The Blackjack forums don't seem to have any solution other than... "go spend another $75 on a new set of headphones"
Myself, I want to use a BT mono speaker for listening to mono recordings and don't really want a stereo headset.
Thanks for all your help!
THANX for the CAB file
REaly thank you for the cab file works gr8.......................................
Thanks...
This one is very nice. I can't speak for others, but here is what I've learned in a short time....
My personalized ring tones are now coming through the BT, along with the called annoucement. Sorta disorienting, but I like it. I bet if I disable call annoucements, this will fix it. I'll look around..... Thanks for this tweak....
I love it!
thanks
hi this is the first time i am using this site hope it works
I just intalled this cab on a Samsung Ace i325 6.1 (Sprint). I'm using the Jawbone II bluetooth and it works perfectly! Thanks for the cab file.
Hi ,
i really appreciate you cooperation about this issue
i have the same problem but with java platform phone SE w550i) with bluetooth headset
i need a java application that let me hear the music via bluetooth headset (application like msi blue player) in jar format
Can any one help (regarding that my bluetooth headset support a2dp and w550i has no problem with that just need application to stream audio through bluetooth headset)
thanks in advance
my mail is [email protected]
THANX for the CAB file
zcink said:
Here is a .cab file that does what you want it to do.
First activate your Bluetooth unit. Then stream your music or whatever. Then turn on the software. It works quite well.
Enjoy !!!
Click to expand...
Click to collapse
thank you bro you solved my problem
This application works awesome... Great work
One issue occurred.... The BT Audio is switched ON, i receive a call, i answer/end it. After the call ends, the music is routed back to the phones speaker. I have to switch ON BT Audio again.
Keep up the good work
I know this has been covered a bit but I have a quick question. MS is saying you need to have AKU 3.2 to get VC to announce caller's over your BT Headset. Has anyone found a simple way to make this work on an earlier ROM. Lately I've been running mostly Molski's ROM, but I dabbled in Faria's 3.2. I swore I had BT working totally with a 2.26 ROM, but am I on crack?
I liked Faria's 3.2 but I was missing too many calls. Is there any way to upgrade just teh BT in an older ROM to make this work. (I'm sure my inexperience shows in this question. If its impossible to do, just say the word and I'll patiently wait for a new 3.2 or 3.5 ROM or just forget about this)
I have two answers to your question.
The first is use the A2DP hack found in this forum and get a stereo bluetooth headset. The iTech Clip R35 or S35 both come with the two headphones; one with only one earbud, so you aren't covering both your ears. When you have a stereo bluetooth headset, all sound, including the calls from MS Voice Command are redirected to your headset.
The second is use the program found here:
http://www.pdaphonehome.com/forums/...luetooth-headset.html?perpage=20&pagenumber=1
It basically redirects all sound to bluetooth (probably a cheaper and easier fix); I haven't tried it yet, but it seems like it might be the solution you are looking for.
I also liked having the feature of calls announced through bluetooth, but it never did seem to work. I have been meaning to download the program from the site, but just haven't gotten chance. If you try it, let me know if it works.
Thanks.
I wonder how hard it would be to get that little program to run automatically when connected to a head set
yeah theres nothign cooler than wearing a stereo headset while driving. Thanks but no thanks.
I've used BT audio with v1.5, and it wasnt for me. i still use it to listen to podcasts via my headset on occasion though.
The nice thing about 1.6 when it was working (mist have been with Faria's ROM) was that I didn't hear my normal phone ringtone through the headset. It rang like normal through my headset, but it would announce the callers name. Its a cool feature.
edit: I must have been wrong. It does divert the ringtone through your headset as well. This gives me hope that I can work somethign out using BTAudio.
Yeah it is a cool feature. You can go to the notification settings in voice command (Settings -> Personal -> Voice Command) and change it so that notifications are done when bluetooth is available (the second radio button). If the notifications cannot sound through your headset, they will come from the phone speaker so you will still be able to hear who is calling without looking at your phone. Doesn't really help if your phone is in your pocket or if you can't hear it, but I guess its the next best alternative.
I have a cooked T-mobile 2.26 ROM and use MS VC 1.6 over my BT205 no problems. I was previously using the original O2 rom and has it working on that too so both an AKU2.0 and an AKU2.3 work fine. To install try this:
remove VC if installed
remove headset pairing
soft reset
create headset pair and leave it switched on
install vc1.6
soft reset
add path string to HKLM\SOFTWARE\OEM\VoiceCommand\
i.e. \Program Files\Voice Command\VoiceCMD.exe
soft reset
then try the button on the headset a few times
Riptos
I'm not having trouble using BT with VC. I want the Incoming call announcements to come over BT.
I installed Farias 3.2 and it worked, but I decided its not a huge deal. I'll try playing around looking at some of teh links here and see if I can't work somethign out. Thanks everyone.
I would also love for voice command 1.6 to announce incoming calls to my bluetooth headset. Interestingly, low battery announcements come through the bluetooth headset, but not incoming calls. Hmmm. Any suggestions/luck getting this to work?
Best,
MJB
VC Caller ID over Bluetooth
I think you all will enjoy this hack
where did u find this hack from? is it reliable?
jacob-mda said:
where did u find this hack from? is it reliable?
Click to expand...
Click to collapse
What? You don't trust someone who's first post is somethign to put on your phone
hell no considering this a brand new mda tmobile just sent me lol..
jacob-mda said:
hell no considering this a brand new mda tmobile just sent me lol..
Click to expand...
Click to collapse
Just wanted to let everyone know I tried it out today and it works as expected. Phone audio gets redirected to BT headset on incoming calls.
but does the ringer get re-directed also? cuz if so thats DAMN ANNOYING!
Well I dont mean to sound condescending to a "senior member" cuz im just a junior but did it cross your mind to select "none" as your ringer? Oh, Btw everyone, your welcome for my fantastic little file
What exactly does the file do???
I had troubles with VC 1.6 at first, but now it seems to work OK. Maybe I accidentally followed Riptos's instructions. Don't know.
Also BTAudio is working to redirect audio when I want that to happen, since VC now closes the audio after it finishes.
The only remaining minor glitch is that after giving a dial command, the little simulated dialing noise comes over the phone speaker not the headphone. So if the phone isn't right by, I don't always know whether it has dialed or not.
Any suggestions?
I tried the CallerID program. It works just as described. The only thing is that is takes up ~443.48 KB at startup. I just installed it so I don't know if it increases after a while.
I have a question. If I understand everything correctly, with a AKU 3.2 ROM this CallerID program isn't necessary if I want to get Incoming Call Announcements over Bluetooth. Right??
Has anyone gotten VC 1.6 to announce incoming calls over a STEREO Bluetooth headset? Seems like the discussions have only been for a hands free device. Anyone?
I don't have a 3.XX ROM and Voice Command notifications work on my stereo bluetooth headset without the program because I think wtih stereo bluetooth, all sound is redirected to the headset. I didn't do anything or change any settings, it just worked. I obviously have the A2DP hack installed, but that's it.
Hi,
I been trying the BtAudioNav to redirect sound to my bluetooth hands-free but it doesn't work on my Trinity.
Anyone has try it with success?
Most mono-headsets do not support the A2DP profile.... so it is to be expected that this doesn't work for music and stuff...
However, i had it working once on my old Fujitsu Loox 600...can't remember how i did that though, but it has a different BT stack anyway...
Or do you just mean the phone-calls being redirected does not work ? Please try to be a bit more specific
Phone-calls works but for example redirect sound from GPS soft to headset not!!. With BtAudioNav should works but with my Trinity not.
Not all phones are capable of directing all audio to the mono bluetooth headset using the handsfree/headset audio gateway profile. Many of them are designed to ONLY stream voice calls. I'm not sure if this is due to the hardware or software (possibly a combination?), but some phones are capable of streaming/redirecting all audio entirely (as well as mic input) to the mono headset. I guess the Trinity doesn't. I've only heard of a few phones that actually work with that BT audio utility you're using, and they seem to be mostly older models, but that's just a guess. Anyway, perhaps there's a way to redirect all audio through the stereo bluetooth profile instead?
1. Copy the folder BTAudio and its contents to \Program Files
2. Using a registry editor amend the following entries from:
HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand
Path = \Program Files\BTAudio\BTAudioOn.Exe
VoiceCmdDuration = 86400 (DEC) = 24 hours
3. Softreset
What does the above tool do exactly?
Tiemen said:
What does the above tool do exactly?
Click to expand...
Click to collapse
Yeah...i'm very curious to what this does too...
Could this by any chance connect a Stereo BT headset in Audiomode by just clicking the .exe ? (ie not having to go into BT settings in the comm manager screen ?)
Moaske said:
Yeah...i'm very curious to what this does too...
Could this by any chance connect a Stereo BT headset in Audiomode by just clicking the .exe ? (ie not having to go into BT settings in the comm manager screen ?)
Click to expand...
Click to collapse
Yes, can you please be more specific as to how this works? Does it interfere with voice dialing or making/receiving calls?
I have an Axim X50v which works just great with Skype and my mono Flamingo BT headset. Now I have an HTC P3600 and Skype won't work through the headset.
Bloody technology seems to go backwards :-(
Thanks.
qyach said:
1. Copy the folder BTAudio and its contents to \Program Files
2. Using a registry editor amend the following entries from:
HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand
Path = \Program Files\BTAudio\BTAudioOn.Exe
VoiceCmdDuration = 86400 (DEC) = 24 hours
3. Softreset
Click to expand...
Click to collapse
After editing, VoiceCommand function is LOST .
All sounds will be re-directed to the blutetooth headset when you press the button(voice dial) on the headset.
Guys, please DO read my past articles and/or use the forum search engine to look for them. At http://forum.xda-developers.com/showthread.php?t=281977 , I've explained everything you need to know.
Did anyone get BTaudio working on their Trinity?
BtAudioToggle opens a link with my mono headset ( I hear hissing in ear piece) but media still plays through Trinity speaker.
I read the Hermes forum about a different reg hack. http://forum.xda-developers.com/showthread.php?t=278778
Whats working for people?
Perfect audio re-direction with Jasjar & Jabra BT250v
that was very neat & BRILLIANT !!!
got my Jabra BT250v without knowing these issues. on discovering that my jasjar was not capable of audio re-direction to Jabra.....I was shattered. ROM upgrades r scary to say the least.
after a day of frantic search & many failed softwares, this one did the trick. 'qyach'.....many thanks for this.
now my Jasjar & Jabra work perfectly with TCPMP & Skype. Voice command continues to work from the Jasjar mic.
I couldn't ask for more.
THANK U ONCE AGAIN !!!
Tried VJVolubilis, Bluemusic and BTAudio (with both of the 2 registry hacks referred to in this thread). None of them worked on my Trinity. Would very much appreciate someone shed more light on this issue.
qyach said:
After editing, VoiceCommand function is LOST .
All sounds will be re-directed to the blutetooth headset when you press the button(voice dial) on the headset.
Click to expand...
Click to collapse
Doesn´t work on my Trinity
Edit: don´t know why but now it works. Only that I have to press the voice dial button twice (?)
Hi,
I got the Motorola T305 to connect to my TyTN and the audio gateway routed to the T305. Everything sounds great but I get this annoying beep once every 5 seconds. Does anybody know how to get rid of it?
Thanks,
Sean
JUST SORTED IT on my TRINITY all workin fine
Only problem is, as the article suggest it disables the voice commands!! I can live with this as I only want to stean the TOMTOM voice when using the satnav while walking or on my bike.
What I had in mind was a a couple of icons, one to make the registry changes for the BT Audio streaming and the other icon to toggle back (ie change the registry back to voice comand via the BT headset). As far as I can see (once BTaudioOn.exe is copied to my Trinity) the only difference between turning my Jabra BT250v into an audio streaming headset and a phone headset are the two registry changes; and then change them back to give me a Phone headset again.
Can anyone tell me if this is possible to use a .REG file?
Can it be written on a PC and then copied to the Trinity so that it runs?
Will reg files run the same on a PDA and they do on a PC?
Thanks in advance
New app?
Can anyone make an app in which you can configure which feature you want?
1) Change to Voice Dail
2) Change to Voice Command
3) Change to a redirection program like BTAudio.
and got to set the delaytime too
Destination Gotland Bluetooth Mono Sound.cab
I installed this, no registry changes, etc. and it works great. you toggle between unit speaker and the headset by hitting the button on the BT headset. It is great for Skype.
The Cab is in the Zip. I think I picked it up off the tutorial here:
http://forum.xda-developers.com/showthread.php?t=281977
Battery Problem
OK, the solution I posted does work well. However it just killed my battery life. I think that whenever the BT is paired, even in the regular mode (not streaming to the mono BT) it uses the full amount of battery as if it was streaming to it. I think the battery life was even reduced without a paired headset as long as BT was not disabled.
I guess I am still looking for a better solution too.
qyach said:
After editing, VoiceCommand function is LOST .
All sounds will be re-directed to the blutetooth headset when you press the button(voice dial) on the headset.
Click to expand...
Click to collapse
THANK YOU !!!! works purrrrrrrrrrfect !!
I've spent days searching and trying all sorts of tweaks but I can't get anything to work. Can anyone PLEASE help!
I use Tomtom 7 and I've always sent the voice instructions to the bluetooth speaker in my bike helmet (just a handsfree paired item). I've previously done this on HTC devices with BTAudio and a one line registry tweak. Can anyone offer a solution to send all the audio to a bluetooth handsfree on the HD2?
I really hope someone can help, I've got the HD2 setup just right except for this last remaining item.
Many thanks,
i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do
xardus said:
i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do
Click to expand...
Click to collapse
Yes I've tried the "manage system audio in handsfree device" option. I can get some background noise on the headsets (I'm trying with a Scala Rider and Motorola 700 & 850) but I never manage to get any sound.
Can anyone please offer a solution? It's a big disappointment for me if this isn't possible. Any suggestions welcome, many thanks.
My Observations
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....
Fadetogrey said:
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....
Click to expand...
Click to collapse
It gives me some hope that you've got it to work with one bluetooth device. Can you please let me know exactly what you did to get the $20 bluetooth earpiece to work?
Thanks,
yeah that was my idea but without a stereo bt device i cant try to myself...i ordered to vodafone one with some of my tons of points...3 weeks and no answer!
I had the same issue and on my old phone, the HTC Touch HD, I used the following program to my satisfaction:
BTAudio
On my HTC HD2 however this doesn't seem to work anymore. :-(
it does the same thing of the inbuild bt option on hd2 its just a "quick link" to place on the bar
anyone of u have any problem with bt device volume? before i have an Artemis and 3 different device i used the device volume was every time the one i choose...now every time a new call starts phone volume its right but device volume jump to minimum level and every time i have to press + button like as i'm playing videopoker to dont miss fist seconds of a conversation
Works fine with Jabra 3030, all audio over it, music, system sounds and calls.
Maybe it's only working for bluetooth devices that are setup as stereo. Can anyone please offer a solution here?
I've installed a 6.5 rom (dutty v7 - thank you) on my HD and after a sprite restore (level 2) bluetooth audio divert works fine. Although I notived that the bluetooth options remained the old settings (possibly due to my backup restore) and the divert was done using the BTAudio. Sorry to keep asking but if anyone can shed light on this.
Is it possible to tweak the HD2 so that audio can be sent to any bluetooth headset/handsfree or is there some hardware limitation that stops this from being done?
I've tried every app and tweak that I can think of! Please can anyone help, even iof it's to let me know why this can't be done.
Thanks,
its what we all are trying to do......now i think its only a bt device problem...if it support bt2.1 and a2dp with edr seems to work all good....
i solved in car with headphone in the box...but bluetooth should be much and much better without any cable that always have to remove nodes (its the right word? sorry if not hehe)
I'm connecting to my HD2 using Jabra Stone, an A2DP headset. When I selected the stereo headset profile on the HD2, it redirected all system sounds to the headset: reminders, SMS alert, soundtrack for videos, audio player....except phone ring. I used BT Audio over a non-A2DP headset before with Diamond2, but the ausio is very poor, and the connection drops very often. Since I changed to A2DP headsets, the Diamond2 and HD2 supports it out of the box - no hack needed.
So look for A2DP headsets if you want to redirect audio.
Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.
I have an LG HBM-220 bluetooth and cannot put audio to in, only phone calls!
How can i manage to do it?
I blame it on the stupid Widcomm Bluetooth stack... If the HD2 used the better MS stack, BT would play nice with with more of our periphirals and apps
I can't use MSVC properly with BT either....
the solution is to go to the bluetooth settings, select your device and connect the stereo audio connection.
Way back, Microsoft decreed that ONLY the phone app could use a mono BlueTooth headset, although any audio could be redirected to a stereo A2DP headset.
In order to get around this you need to fudge the sytem with something like BTAudio or TekSoft's BlueAudio.
The latter worked on my XDA Orbits (1 and 2) but does not work on my Touch HD with Dutty's R6 ROM (WM 6.5) possibly because BlueAudio requires the Microsoft BlueTooth stack and I suspect Dutty's ROM has the Widcomm stack. But I could be wrong about that.
BTAudio sort of works on my Touch HD, but outgoing audio is speeded up like I've been breathing Helium.
So no current solution to yet another idiotic gotcha from Microsoft.
Noony said:
Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.
Click to expand...
Click to collapse
Hmmm. When I conect via gprs to youtube aps I can hear the voice in my mono headset (jabra 2020) but via wifi and computer as modem voice is only in phone speaker. So maybe we should look gprs or youtube aps reg tweek.
Guys
i have a nokia HB-100 headset and i'm experiencing all kinds of strange behavours
sometimes system sounds including music ...etc get directed to the headset and some other time it just directs calls no matter how hard i try thru soft resets or unchecking then checking the "play system sounds ..." option!
very strange, any insights about this? is there a tweak to go with or is it a known WM defect?